New URL for NEMO forge!   http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.
nemogcm.F90 in NEMO/branches/2019/dev_r11233_AGRIF-05_jchanut_vert_coord_interp/src/SAS – NEMO

source: NEMO/branches/2019/dev_r11233_AGRIF-05_jchanut_vert_coord_interp/src/SAS/nemogcm.F90 @ 11574

Last change on this file since 11574 was 11573, checked in by jchanut, 5 years ago

#2222, merged with trunk

  • Property svn:keywords set to Id
File size: 27.7 KB
Line 
1MODULE nemogcm
2   !!======================================================================
3   !!                       ***  MODULE nemogcm   ***
4   !! StandAlone Surface module : surface fluxes + sea-ice + iceberg floats
5   !!======================================================================
6   !! History :  3.6  ! 2011-11  (S. Alderson, G. Madec) original code
7   !!             -   ! 2013-06  (I. Epicoco, S. Mocavero, CMCC) nemo_northcomms: setup avoiding MPI communication
8   !!             -   ! 2014-12  (G. Madec) remove KPP scheme and cross-land advection (cla)
9   !!            4.0  ! 2016-10  (G. Madec, S. Flavoni)  domain configuration / user defined interface
10   !!----------------------------------------------------------------------
11
12   !!----------------------------------------------------------------------
13   !!   nemo_gcm      : solve ocean dynamics, tracer, biogeochemistry and/or sea-ice
14   !!   nemo_init     : initialization of the NEMO system
15   !!   nemo_ctl      : initialisation of the contol print
16   !!   nemo_closefile: close remaining open files
17   !!   nemo_alloc    : dynamical allocation
18   !!----------------------------------------------------------------------
19   USE step_oce       ! module used in the ocean time stepping module
20   USE sbc_oce        ! surface boundary condition: ocean
21   USE phycst         ! physical constant                  (par_cst routine)
22   USE domain         ! domain initialization   (dom_init & dom_cfg routines)
23   USE closea         ! treatment of closed seas (for ln_closea)
24   USE usrdef_nam     ! user defined configuration
25   USE daymod         ! calendar
26   USE restart        ! open  restart file
27   USE step           ! NEMO time-stepping                 (stp     routine)
28   USE cpl_oasis3     !
29   USE sbcssm         !
30   USE icbini         ! handle bergs, initialisation
31   USE icbstp         ! handle bergs, calving, themodynamics and transport
32   USE bdyini         ! open boundary cond. setting       (bdy_init routine). mandatory for sea-ice
33   USE bdydta         ! open boundary cond. setting   (bdy_dta_init routine). mandatory for sea-ice
34   !
35   USE lib_mpp        ! distributed memory computing
36   USE mppini         ! shared/distributed memory setting (mpp_init routine)
37   USE lbcnfd  , ONLY : isendto, nsndto, nfsloop, nfeloop   ! Setup of north fold exchanges
38   USE lib_fortran    ! Fortran utilities (allows no signed zero when 'key_nosignedzero' defined)
39#if defined key_iomput
40   USE xios           ! xIOserver
41#endif
42#if defined key_agrif && defined key_si3
43   USE agrif_ice_update ! ice update
44#endif
45
46   IMPLICIT NONE
47   PRIVATE
48
49   PUBLIC   nemo_gcm    ! called by model.F90
50   PUBLIC   nemo_init   ! needed by AGRIF
51
52   CHARACTER(lc) ::   cform_aaa="( /, 'AAAAAAAA', / ) "     ! flag for output listing
53
54   !!----------------------------------------------------------------------
55   !! NEMO/SAS 4.0 , NEMO Consortium (2018)
56   !! $Id$
57   !! Software governed by the CeCILL license (see ./LICENSE)
58   !!----------------------------------------------------------------------
59CONTAINS
60
61   SUBROUTINE nemo_gcm
62      !!----------------------------------------------------------------------
63      !!                     ***  ROUTINE nemo_gcm  ***
64      !!
65      !! ** Purpose :   NEMO solves the primitive equations on an orthogonal
66      !!              curvilinear mesh on the sphere.
67      !!
68      !! ** Method  : - model general initialization
69      !!              - launch the time-stepping (stp routine)
70      !!              - finalize the run by closing files and communications
71      !!
72      !! References : Madec, Delecluse, Imbard, and Levy, 1997:  internal report, IPSL.
73      !!              Madec, 2008, internal report, IPSL.
74      !!----------------------------------------------------------------------
75      INTEGER ::   istp   ! time step index
76      !!----------------------------------------------------------------------
77      !
78#if defined key_agrif
79      CALL Agrif_Init_Grids()      ! AGRIF: set the meshes
80#endif
81      !                            !-----------------------!
82      CALL nemo_init               !==  Initialisations  ==!
83      !                            !-----------------------!
84#if defined key_agrif
85      CALL Agrif_Declare_Var_dom   ! AGRIF: set the meshes for DOM
86      CALL Agrif_Declare_Var       !  "      "   "   "      "  DYN/TRA
87# if defined key_top
88      CALL Agrif_Declare_Var_top   !  "      "   "   "      "  TOP
89# endif
90# if defined key_si3
91      CALL Agrif_Declare_Var_ice   !  "      "   "   "      "  Sea ice
92# endif
93#endif
94      ! check that all process are still there... If some process have an error,
95      ! they will never enter in step and other processes will wait until the end of the cpu time!
96      CALL mpp_max( 'nemogcm', nstop )
97
98      IF(lwp) WRITE(numout,cform_aaa)   ! Flag AAAAAAA
99
100      !                            !-----------------------!
101      !                            !==   time stepping   ==!
102      !                            !-----------------------!
103      istp = nit000
104      !
105#if defined key_agrif
106      !                                               !==  AGRIF time-stepping  ==!
107      CALL Agrif_Regrid()
108      !
109#if defined key_si3
110      ! Recursive update from highest nested level to lowest:
111      CALL Agrif_step_child_adj(Agrif_update_ice)
112#endif
113      !
114      DO WHILE( istp <= nitend .AND. nstop == 0 )
115         CALL stp
116         istp = istp + 1
117      END DO
118      !
119      IF( .NOT. Agrif_Root() ) THEN
120         CALL Agrif_ParentGrid_To_ChildGrid()
121         IF( ln_timing )   CALL timing_finalize
122         CALL Agrif_ChildGrid_To_ParentGrid()
123      ENDIF
124      !
125#else
126      !
127      IF( .NOT.ln_diurnal_only ) THEN                 !==  Standard time-stepping  ==!
128         !
129         DO WHILE( istp <= nitend .AND. nstop == 0 )
130            CALL stp        ( istp ) 
131            istp = istp + 1
132         END DO
133         !
134      ELSE                                            !==  diurnal SST time-steeping only  ==!
135         !
136         DO WHILE( istp <= nitend .AND. nstop == 0 )
137            CALL stp_diurnal( istp )   ! time step only the diurnal SST
138            istp = istp + 1
139         END DO
140         !
141      ENDIF
142      !
143#endif
144      !
145      IF( ln_icebergs )   CALL icb_end( nitend )
146
147      !                            !------------------------!
148      !                            !==  finalize the run  ==!
149      !                            !------------------------!
150      IF(lwp) WRITE(numout,cform_aaa)        ! Flag AAAAAAA
151      !
152      IF( nstop /= 0 .AND. lwp ) THEN        ! error print
153         WRITE(ctmp1,*) '   ==>>>   nemo_gcm: a total of ', nstop, ' errors have been found'
154         CALL ctl_stop( ctmp1 )
155      ENDIF
156      !
157      IF( ln_timing )   CALL timing_finalize
158      !
159      CALL nemo_closefile
160      !
161#if defined key_iomput
162                                    CALL xios_finalize  ! end mpp communications with xios
163      IF( lk_oasis     )            CALL cpl_finalize   ! end coupling and mpp communications with OASIS
164#else
165      IF    ( lk_oasis ) THEN   ;   CALL cpl_finalize   ! end coupling and mpp communications with OASIS
166      ELSEIF( lk_mpp   ) THEN   ;   CALL mppstop        ! end mpp communications
167      ENDIF
168#endif
169      !
170      IF(lwm) THEN
171         IF( nstop == 0 ) THEN   ;   STOP 0
172         ELSE                    ;   STOP 123
173         ENDIF
174      ENDIF
175      !
176   END SUBROUTINE nemo_gcm
177
178
179   SUBROUTINE nemo_init
180      !!----------------------------------------------------------------------
181      !!                     ***  ROUTINE nemo_init  ***
182      !!
183      !! ** Purpose :   initialization of the NEMO GCM
184      !!----------------------------------------------------------------------
185      INTEGER ::   ios, ilocal_comm   ! local integers
186      !!
187      NAMELIST/namctl/ ln_ctl   , sn_cfctl, nn_print, nn_ictls, nn_ictle,   &
188         &             nn_isplt , nn_jsplt, nn_jctls, nn_jctle,             &
189         &             ln_timing, ln_diacfl
190      NAMELIST/namcfg/ ln_read_cfg, cn_domcfg, ln_closea, ln_write_cfg, cn_domcfg_out, ln_use_jattr
191      !!----------------------------------------------------------------------
192      !
193      IF( lk_oasis ) THEN   ;   cxios_context = 'sas'
194      ELSE                  ;   cxios_context = 'nemo'
195      ENDIF
196      !
197      !                             !-------------------------------------------------!
198      !                             !     set communicator & select the local rank    !
199      !                             !  must be done as soon as possible to get narea  !
200      !                             !-------------------------------------------------!
201      !
202#if defined key_iomput
203      IF( Agrif_Root() ) THEN
204         IF( lk_oasis ) THEN
205            CALL cpl_init( "sas", ilocal_comm )                                  ! nemo local communicator given by oasis
206            CALL xios_initialize( "not used",local_comm=ilocal_comm )            ! send nemo communicator to xios
207         ELSE
208            CALL xios_initialize( "for_xios_mpi_id",return_comm=ilocal_comm )    ! nemo local communicator given by xios
209         ENDIF
210      ENDIF
211      CALL mpp_start( ilocal_comm )
212#else
213      IF( lk_oasis ) THEN
214         IF( Agrif_Root() ) THEN
215            CALL cpl_init( "sas", ilocal_comm )             ! nemo local communicator given by oasis
216         ENDIF
217         CALL mpp_start( ilocal_comm )
218      ELSE
219         CALL mpp_start( )
220      ENDIF
221#endif
222      !
223      narea = mpprank + 1                                   ! mpprank: the rank of proc (0 --> mppsize -1 )
224      lwm = (narea == 1)                ! control of output namelists
225      !
226      !                             !---------------------------------------------------------------!
227      !                             ! Open output files, reference and configuration namelist files !
228      !                             !---------------------------------------------------------------!
229      !
230      ! open ocean.output as soon as possible to get all output prints (including errors messages)
231      IF( lk_oasis ) THEN
232         IF( lwm )   CALL ctl_opn(     numout,              'sas.output', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
233         ! open reference and configuration namelist files
234                     CALL ctl_opn( numnam_ref,        'namelist_sas_ref',     'OLD', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
235                     CALL ctl_opn( numnam_cfg,        'namelist_sas_cfg',     'OLD', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
236         IF( lwm )   CALL ctl_opn(     numond, 'output.namelist_sas.dyn', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
237      ELSE
238         IF( lwm )   CALL ctl_opn(     numout,            'ocean.output', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
239         ! open reference and configuration namelist files
240                     CALL ctl_opn( numnam_ref,            'namelist_ref',     'OLD', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
241                     CALL ctl_opn( numnam_cfg,            'namelist_cfg',     'OLD', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
242         IF( lwm )   CALL ctl_opn(     numond,     'output.namelist.dyn', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
243      ENDIF
244      ! open /dev/null file to be able to supress output write easily
245                     CALL ctl_opn(     numnul,               '/dev/null', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
246      !
247      !                             !--------------------!
248      !                             ! Open listing units !  -> need ln_ctl from namctl to define lwp
249      !                             !--------------------!
250      !
251      REWIND( numnam_ref )              ! Namelist namctl in reference namelist
252      READ  ( numnam_ref, namctl, IOSTAT = ios, ERR = 901 )
253901   IF( ios /= 0 )   CALL ctl_nam ( ios , 'namctl in reference namelist' )
254      REWIND( numnam_cfg )              ! Namelist namctl in confguration namelist
255      READ  ( numnam_cfg, namctl, IOSTAT = ios, ERR = 902 )
256902   IF( ios >  0 )   CALL ctl_nam ( ios , 'namctl in configuration namelist' )
257      !
258      lwp = (narea == 1) .OR. ln_ctl    ! control of all listing output print
259      !
260      IF(lwp) THEN                      ! open listing units
261         !
262         IF( .NOT. lwm ) THEN           ! alreay opened for narea == 1
263            IF(lk_oasis) THEN   ;   CALL ctl_opn( numout,   'sas.output','REPLACE','FORMATTED','SEQUENTIAL',-1,-1, .FALSE., narea )
264            ELSE                ;   CALL ctl_opn( numout, 'ocean.output','REPLACE','FORMATTED','SEQUENTIAL',-1,-1, .FALSE., narea )
265            ENDIF
266         ENDIF
267         !
268         WRITE(numout,*)
269         WRITE(numout,*) '   CNRS - NERC - Met OFFICE - MERCATOR-ocean - CMCC'
270         WRITE(numout,*) '                       NEMO team'
271         WRITE(numout,*) '            Ocean General Circulation Model'
272         WRITE(numout,*) '                NEMO version 4.0  (2019) '
273         WRITE(numout,*) '             StandAlone Surface version (SAS) '
274         WRITE(numout,*) "           ._      ._      ._      ._      ._    "
275         WRITE(numout,*) "       _.-._)`\_.-._)`\_.-._)`\_.-._)`\_.-._)`\_ "
276         WRITE(numout,*)
277         WRITE(numout,*) "           o         _,           _,             "
278         WRITE(numout,*) "            o      .' (        .-' /             "
279         WRITE(numout,*) "           o     _/..._'.    .'   /              "
280         WRITE(numout,*) "      (    o .-'`      ` '-./  _.'               "
281         WRITE(numout,*) "       )    ( o)           ;= <_         (       "
282         WRITE(numout,*) "      (      '-.,\\__ __.-;`\   '.        )      "
283         WRITE(numout,*) "       )  )       \) |`\ \)  '.   \      (   (   "
284         WRITE(numout,*) "      (  (           \_/       '-._\      )   )  "
285         WRITE(numout,*) "       )  ) jgs                    `     (   (   "
286         WRITE(numout,*) "     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ "
287         WRITE(numout,*)
288         WRITE(numout,*)
289         !
290         WRITE(numout,cform_aaa)                                        ! Flag AAAAAAA
291         !
292      ENDIF
293     !
294      ! finalize the definition of namctl variables
295      IF( sn_cfctl%l_config ) THEN
296         ! Activate finer control of report outputs
297         ! optionally switch off output from selected areas (note this only
298         ! applies to output which does not involve global communications)
299         IF( ( narea < sn_cfctl%procmin .OR. narea > sn_cfctl%procmax  ) .OR. &
300           & ( MOD( narea - sn_cfctl%procmin, sn_cfctl%procincr ) /= 0 ) )    &
301           &   CALL nemo_set_cfctl( sn_cfctl, .FALSE., .FALSE. )
302      ELSE
303         ! Use ln_ctl to turn on or off all options.
304         CALL nemo_set_cfctl( sn_cfctl, ln_ctl, .TRUE. )
305      ENDIF
306      !
307      IF(lwm) WRITE( numond, namctl )
308      !
309      !                             !------------------------------------!
310      !                             !  Set global domain size parameters !
311      !                             !------------------------------------!
312      !
313      REWIND( numnam_ref )              ! Namelist namcfg in reference namelist
314      READ  ( numnam_ref, namcfg, IOSTAT = ios, ERR = 903 )
315903   IF( ios /= 0 )   CALL ctl_nam ( ios , 'namcfg in reference namelist' )
316      REWIND( numnam_cfg )              ! Namelist namcfg in confguration namelist
317      READ  ( numnam_cfg, namcfg, IOSTAT = ios, ERR = 904 )
318904   IF( ios >  0 )   CALL ctl_nam ( ios , 'namcfg in configuration namelist' )   
319      !
320      IF( ln_read_cfg ) THEN            ! Read sizes in domain configuration file
321         CALL domain_cfg ( cn_cfg, nn_cfg, jpiglo, jpjglo, jpkglo, jperio )
322      ELSE                              ! user-defined namelist
323         CALL usr_def_nam( cn_cfg, nn_cfg, jpiglo, jpjglo, jpkglo, jperio )
324      ENDIF
325      !
326      IF(lwm)   WRITE( numond, namcfg )
327      !
328      !                             !-----------------------------------------!
329      !                             ! mpp parameters and domain decomposition !
330      !                             !-----------------------------------------!
331      CALL mpp_init
332
333      ! Now we know the dimensions of the grid and numout has been set: we can allocate arrays
334      CALL nemo_alloc()
335
336      !                             !-------------------------------!
337      !                             !  NEMO general initialization  !
338      !                             !-------------------------------!
339
340      CALL nemo_ctl                          ! Control prints
341      !
342      !                                      ! General initialization
343      IF( ln_timing    )   CALL timing_init     ! timing
344      IF( ln_timing    )   CALL timing_start( 'nemo_init')
345
346                           CALL phy_cst         ! Physical constants
347                           CALL eos_init        ! Equation of seawater
348                           CALL dom_init('SAS') ! Domain
349      IF( ln_ctl      )    CALL prt_ctl_init    ! Print control
350     
351                           CALL day_init        ! model calendar (using both namelist and restart infos)
352      IF( ln_rstart )      CALL rst_read_open
353
354      !                                      ! external forcing
355                           CALL sbc_init        ! Forcings : surface module
356
357      ! ==> clem: open boundaries init. is mandatory for sea-ice because ice BDY is not decoupled from 
358      !           the environment of ocean BDY. Therefore bdy is called in both OPA and SAS modules.
359      !           This is not clean and should be changed in the future.
360                           CALL bdy_init
361      ! ==>
362                           CALL icb_init( rdt, nit000)   ! initialise icebergs instance
363      !
364      IF(lwp) WRITE(numout,cform_aaa)           ! Flag AAAAAAA
365      !
366      IF( ln_timing    )   CALL timing_stop( 'nemo_init')
367      !
368   END SUBROUTINE nemo_init
369
370
371   SUBROUTINE nemo_ctl
372      !!----------------------------------------------------------------------
373      !!                     ***  ROUTINE nemo_ctl  ***
374      !!
375      !! ** Purpose :   control print setting
376      !!
377      !! ** Method  : - print namctl information and check some consistencies
378      !!----------------------------------------------------------------------
379      !
380      IF(lwp) THEN                  ! control print
381         WRITE(numout,*)
382         WRITE(numout,*) 'nemo_ctl: Control prints'
383         WRITE(numout,*) '~~~~~~~~'
384         WRITE(numout,*) '   Namelist namctl'
385         WRITE(numout,*) '      run control (for debugging)     ln_ctl     = ', ln_ctl
386         WRITE(numout,*) '       finer control over o/p sn_cfctl%l_config  = ', sn_cfctl%l_config
387         WRITE(numout,*) '                              sn_cfctl%l_runstat = ', sn_cfctl%l_runstat
388         WRITE(numout,*) '                              sn_cfctl%l_trcstat = ', sn_cfctl%l_trcstat
389         WRITE(numout,*) '                              sn_cfctl%l_oceout  = ', sn_cfctl%l_oceout
390         WRITE(numout,*) '                              sn_cfctl%l_layout  = ', sn_cfctl%l_layout
391         WRITE(numout,*) '                              sn_cfctl%l_mppout  = ', sn_cfctl%l_mppout
392         WRITE(numout,*) '                              sn_cfctl%l_mpptop  = ', sn_cfctl%l_mpptop
393         WRITE(numout,*) '                              sn_cfctl%procmin   = ', sn_cfctl%procmin 
394         WRITE(numout,*) '                              sn_cfctl%procmax   = ', sn_cfctl%procmax 
395         WRITE(numout,*) '                              sn_cfctl%procincr  = ', sn_cfctl%procincr 
396         WRITE(numout,*) '                              sn_cfctl%ptimincr  = ', sn_cfctl%ptimincr 
397         WRITE(numout,*) '      level of print                  nn_print   = ', nn_print
398         WRITE(numout,*) '      Start i indice for SUM control  nn_ictls   = ', nn_ictls
399         WRITE(numout,*) '      End i indice for SUM control    nn_ictle   = ', nn_ictle
400         WRITE(numout,*) '      Start j indice for SUM control  nn_jctls   = ', nn_jctls
401         WRITE(numout,*) '      End j indice for SUM control    nn_jctle   = ', nn_jctle
402         WRITE(numout,*) '      number of proc. following i     nn_isplt   = ', nn_isplt
403         WRITE(numout,*) '      number of proc. following j     nn_jsplt   = ', nn_jsplt
404         WRITE(numout,*) '      timing by routine               ln_timing  = ', ln_timing
405         WRITE(numout,*) '      CFL diagnostics                 ln_diacfl  = ', ln_diacfl
406      ENDIF
407      !
408      nprint    = nn_print          ! convert DOCTOR namelist names into OLD names
409      nictls    = nn_ictls
410      nictle    = nn_ictle
411      njctls    = nn_jctls
412      njctle    = nn_jctle
413      isplt     = nn_isplt
414      jsplt     = nn_jsplt
415
416      IF(lwp) THEN                  ! control print
417         WRITE(numout,*)
418         WRITE(numout,*) '   Namelist namcfg'
419         WRITE(numout,*) '      read domain configuration file                ln_read_cfg      = ', ln_read_cfg
420         WRITE(numout,*) '         filename to be read                           cn_domcfg     = ', TRIM(cn_domcfg)
421         WRITE(numout,*) '         keep closed seas in the domain (if exist)     ln_closea     = ', ln_closea
422         WRITE(numout,*) '      create a configuration definition file        ln_write_cfg     = ', ln_write_cfg
423         WRITE(numout,*) '         filename to be written                        cn_domcfg_out = ', TRIM(cn_domcfg_out)
424         WRITE(numout,*) '      use file attribute if exists as i/p j-start   ln_use_jattr     = ', ln_use_jattr
425      ENDIF
426      IF( .NOT.ln_read_cfg )   ln_closea = .false.   ! dealing possible only with a domcfg file
427      !
428      !                             ! Parameter control
429      !
430      IF( ln_ctl ) THEN                 ! sub-domain area indices for the control prints
431         IF( lk_mpp .AND. jpnij > 1 ) THEN
432            isplt = jpni   ;   jsplt = jpnj   ;   ijsplt = jpni*jpnj   ! the domain is forced to the real split domain
433         ELSE
434            IF( isplt == 1 .AND. jsplt == 1  ) THEN
435               CALL ctl_warn( ' - isplt & jsplt are equal to 1',   &
436                  &           ' - the print control will be done over the whole domain' )
437            ENDIF
438            ijsplt = isplt * jsplt            ! total number of processors ijsplt
439         ENDIF
440         IF(lwp) WRITE(numout,*)'          - The total number of processors over which the'
441         IF(lwp) WRITE(numout,*)'            print control will be done is ijsplt : ', ijsplt
442         !
443         !                              ! indices used for the SUM control
444         IF( nictls+nictle+njctls+njctle == 0 )   THEN    ! print control done over the default area
445            lsp_area = .FALSE.
446         ELSE                                             ! print control done over a specific  area
447            lsp_area = .TRUE.
448            IF( nictls < 1 .OR. nictls > jpiglo )   THEN
449               CALL ctl_warn( '          - nictls must be 1<=nictls>=jpiglo, it is forced to 1' )
450               nictls = 1
451            ENDIF
452            IF( nictle < 1 .OR. nictle > jpiglo )   THEN
453               CALL ctl_warn( '          - nictle must be 1<=nictle>=jpiglo, it is forced to jpiglo' )
454               nictle = jpiglo
455            ENDIF
456            IF( njctls < 1 .OR. njctls > jpjglo )   THEN
457               CALL ctl_warn( '          - njctls must be 1<=njctls>=jpjglo, it is forced to 1' )
458               njctls = 1
459            ENDIF
460            IF( njctle < 1 .OR. njctle > jpjglo )   THEN
461               CALL ctl_warn( '          - njctle must be 1<=njctle>=jpjglo, it is forced to jpjglo' )
462               njctle = jpjglo
463            ENDIF
464         ENDIF
465      ENDIF
466      !
467      IF( 1._wp /= SIGN(1._wp,-0._wp)  )   CALL ctl_stop( 'nemo_ctl: The intrinsec SIGN function follows f2003 standard.',  &
468         &                                                'Compile with key_nosignedzero enabled:',   &
469         &                                                '--> add -Dkey_nosignedzero to the definition of %CPP in your arch file' )
470      !
471#if defined key_agrif
472      IF( ln_timing )   CALL ctl_stop( 'AGRIF not implemented with ln_timing = true')
473#endif
474      !
475   END SUBROUTINE nemo_ctl
476
477
478   SUBROUTINE nemo_closefile
479      !!----------------------------------------------------------------------
480      !!                     ***  ROUTINE nemo_closefile  ***
481      !!
482      !! ** Purpose :   Close the files
483      !!----------------------------------------------------------------------
484      !
485      IF( lk_mpp )   CALL mppsync
486      !
487      CALL iom_close                                 ! close all input/output files managed by iom_*
488      !
489      IF( numstp          /= -1 )   CLOSE( numstp          )   ! time-step file     
490      IF( numrun          /= -1 )   CLOSE( numrun          )   ! run statistics file
491      IF( numnam_ref      /= -1 )   CLOSE( numnam_ref      )   ! oce reference namelist
492      IF( numnam_cfg      /= -1 )   CLOSE( numnam_cfg      )   ! oce configuration namelist
493      IF( lwm.AND.numond  /= -1 )   CLOSE( numond          )   ! oce output namelist
494      IF( numnam_ice_ref  /= -1 )   CLOSE( numnam_ice_ref  )   ! ice reference namelist
495      IF( numnam_ice_cfg  /= -1 )   CLOSE( numnam_ice_cfg  )   ! ice configuration namelist
496      IF( lwm.AND.numoni  /= -1 )   CLOSE( numoni          )   ! ice output namelist
497      IF( numevo_ice      /= -1 )   CLOSE( numevo_ice      )   ! ice variables (temp. evolution)
498      IF( numout          /=  6 )   CLOSE( numout          )   ! standard model output file
499      !
500      numout = 6                                     ! redefine numout in case it is used after this point...
501      !
502   END SUBROUTINE nemo_closefile
503
504
505   SUBROUTINE nemo_alloc
506      !!----------------------------------------------------------------------
507      !!                     ***  ROUTINE nemo_alloc  ***
508      !!
509      !! ** Purpose :   Allocate all the dynamic arrays of the OPA modules
510      !!
511      !! ** Method  :
512      !!----------------------------------------------------------------------
513      USE diawri    , ONLY : dia_wri_alloc
514      USE dom_oce   , ONLY : dom_oce_alloc
515      USE bdy_oce   , ONLY : ln_bdy, bdy_oce_alloc
516      USE oce       ! mandatory for sea-ice because needed for bdy arrays
517      !
518      INTEGER :: ierr
519      !!----------------------------------------------------------------------
520      !
521      ierr =        dia_wri_alloc()
522      ierr = ierr + dom_oce_alloc()          ! ocean domain
523      ierr = ierr + oce_alloc    ()          ! (tsn...) needed for agrif and/or SI3 and bdy
524      ierr = ierr + bdy_oce_alloc()          ! bdy masks (incl. initialization)
525      !
526      CALL mpp_sum( 'nemogcm', ierr )
527      IF( ierr /= 0 )   CALL ctl_stop( 'STOP', 'nemo_alloc: unable to allocate standard ocean arrays' )
528      !
529   END SUBROUTINE nemo_alloc
530
531   SUBROUTINE nemo_set_cfctl(sn_cfctl, setto, for_all )
532      !!----------------------------------------------------------------------
533      !!                     ***  ROUTINE nemo_set_cfctl  ***
534      !!
535      !! ** Purpose :   Set elements of the output control structure to setto.
536      !!                for_all should be .false. unless all areas are to be
537      !!                treated identically.
538      !!
539      !! ** Method  :   Note this routine can be used to switch on/off some
540      !!                types of output for selected areas but any output types
541      !!                that involve global communications (e.g. mpp_max, glob_sum)
542      !!                should be protected from selective switching by the
543      !!                for_all argument
544      !!----------------------------------------------------------------------
545      LOGICAL :: setto, for_all
546      TYPE(sn_ctl) :: sn_cfctl
547      !!----------------------------------------------------------------------
548      IF( for_all ) THEN
549         sn_cfctl%l_runstat = setto
550         sn_cfctl%l_trcstat = setto
551      ENDIF
552      sn_cfctl%l_oceout  = setto
553      sn_cfctl%l_layout  = setto
554      sn_cfctl%l_mppout  = setto
555      sn_cfctl%l_mpptop  = setto
556   END SUBROUTINE nemo_set_cfctl
557
558   !!======================================================================
559END MODULE nemogcm
560
Note: See TracBrowser for help on using the repository browser.