New URL for NEMO forge!   http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.
nemogcm.F90 in NEMO/branches/2020/dev_r12563_ASINTER-06_ABL_improvement/src/SAS – NEMO

source: NEMO/branches/2020/dev_r12563_ASINTER-06_ABL_improvement/src/SAS/nemogcm.F90 @ 12808

Last change on this file since 12808 was 12489, checked in by davestorkey, 4 years ago

Preparation for new timestepping scheme #2390.
Main changes:

  1. Initial euler timestep now handled in stp and not in TRA/DYN routines.
  2. Renaming of all timestep parameters. In summary, the namelist parameter is now rn_Dt and the current timestep is rDt (and rDt_ice, rDt_trc etc).
  3. Renaming of a few miscellaneous parameters, eg. atfp -> rn_atfp (namelist parameter used everywhere) and rau0 -> rho0.

This version gives bit-comparable results to the previous version of the trunk.

  • Property svn:keywords set to Id
File size: 28.2 KB
Line 
1MODULE nemogcm
2   !!======================================================================
3   !!                       ***  MODULE nemogcm   ***
4   !! StandAlone Surface module : surface fluxes + sea-ice + iceberg floats
5   !!======================================================================
6   !! History :  3.6  ! 2011-11  (S. Alderson, G. Madec) original code
7   !!             -   ! 2013-06  (I. Epicoco, S. Mocavero, CMCC) nemo_northcomms: setup avoiding MPI communication
8   !!             -   ! 2014-12  (G. Madec) remove KPP scheme and cross-land advection (cla)
9   !!            4.0  ! 2016-10  (G. Madec, S. Flavoni)  domain configuration / user defined interface
10   !!----------------------------------------------------------------------
11
12   !!----------------------------------------------------------------------
13   !!   nemo_gcm      : solve ocean dynamics, tracer, biogeochemistry and/or sea-ice
14   !!   nemo_init     : initialization of the NEMO system
15   !!   nemo_ctl      : initialisation of the contol print
16   !!   nemo_closefile: close remaining open files
17   !!   nemo_alloc    : dynamical allocation
18   !!----------------------------------------------------------------------
19   USE step_oce       ! module used in the ocean time stepping module
20   USE sbc_oce        ! surface boundary condition: ocean
21   USE phycst         ! physical constant                  (par_cst routine)
22   USE domain         ! domain initialization   (dom_init & dom_cfg routines)
23   USE closea         ! treatment of closed seas (for ln_closea)
24   USE usrdef_nam     ! user defined configuration
25   USE daymod         ! calendar
26   USE restart        ! open  restart file
27   USE step           ! NEMO time-stepping                 (stp     routine)
28   USE cpl_oasis3     !
29   USE sbcssm         !
30   USE icbini         ! handle bergs, initialisation
31   USE icbstp         ! handle bergs, calving, themodynamics and transport
32   USE bdyini         ! open boundary cond. setting       (bdy_init routine). mandatory for sea-ice
33   USE bdydta         ! open boundary cond. setting   (bdy_dta_init routine). mandatory for sea-ice
34   USE diu_layers     ! diurnal bulk SST and coolskin
35   USE step_diu       ! diurnal bulk SST timestepping (called from here if run offline)
36   !
37   USE lib_mpp        ! distributed memory computing
38   USE mppini         ! shared/distributed memory setting (mpp_init routine)
39   USE lbcnfd  , ONLY : isendto, nsndto, nfsloop, nfeloop   ! Setup of north fold exchanges
40   USE lib_fortran    ! Fortran utilities (allows no signed zero when 'key_nosignedzero' defined)
41#if defined key_iomput
42   USE xios           ! xIOserver
43#endif
44#if defined key_agrif && defined key_si3
45   USE agrif_ice_update ! ice update
46#endif
47
48   IMPLICIT NONE
49   PRIVATE
50
51   PUBLIC   nemo_gcm    ! called by model.F90
52   PUBLIC   nemo_init   ! needed by AGRIF
53
54   CHARACTER(lc) ::   cform_aaa="( /, 'AAAAAAAA', / ) "     ! flag for output listing
55
56#if defined key_mpp_mpi
57   INCLUDE 'mpif.h'
58#endif
59
60   !!----------------------------------------------------------------------
61   !! NEMO/SAS 4.0 , NEMO Consortium (2018)
62   !! $Id$
63   !! Software governed by the CeCILL license (see ./LICENSE)
64   !!----------------------------------------------------------------------
65CONTAINS
66
67   SUBROUTINE nemo_gcm
68      !!----------------------------------------------------------------------
69      !!                     ***  ROUTINE nemo_gcm  ***
70      !!
71      !! ** Purpose :   NEMO solves the primitive equations on an orthogonal
72      !!              curvilinear mesh on the sphere.
73      !!
74      !! ** Method  : - model general initialization
75      !!              - launch the time-stepping (stp routine)
76      !!              - finalize the run by closing files and communications
77      !!
78      !! References : Madec, Delecluse, Imbard, and Levy, 1997:  internal report, IPSL.
79      !!              Madec, 2008, internal report, IPSL.
80      !!----------------------------------------------------------------------
81      INTEGER ::   istp   ! time step index
82      !!----------------------------------------------------------------------
83      !
84#if defined key_agrif
85      CALL Agrif_Init_Grids()      ! AGRIF: set the meshes
86#endif
87      !                            !-----------------------!
88      CALL nemo_init               !==  Initialisations  ==!
89      !                            !-----------------------!
90#if defined key_agrif
91      Kbb_a = Nbb; Kmm_a = Nnn; Krhs_a = Nrhs   ! agrif_oce module copies of time level indices
92      CALL Agrif_Declare_Var_dom   ! AGRIF: set the meshes for DOM
93      CALL Agrif_Declare_Var       !  "      "   "   "      "  DYN/TRA
94# if defined key_top
95      CALL Agrif_Declare_Var_top   !  "      "   "   "      "  TOP
96# endif
97# if defined key_si3
98      CALL Agrif_Declare_Var_ice   !  "      "   "   "      "  Sea ice
99# endif
100#endif
101      ! check that all process are still there... If some process have an error,
102      ! they will never enter in step and other processes will wait until the end of the cpu time!
103      CALL mpp_max( 'nemogcm', nstop )
104
105      IF(lwp) WRITE(numout,cform_aaa)   ! Flag AAAAAAA
106
107      !                            !-----------------------!
108      !                            !==   time stepping   ==!
109      !                            !-----------------------!
110      istp = nit000
111      !
112#if defined key_agrif
113      !                                               !==  AGRIF time-stepping  ==!
114      CALL Agrif_Regrid()
115      !
116#if defined key_si3
117      ! Recursive update from highest nested level to lowest:
118      Kbb_a = Nbb; Kmm_a = Nnn; Krhs_a = Nrhs   ! agrif_oce module copies of time level indices
119      CALL Agrif_step_child_adj(Agrif_update_ice)
120#endif
121      !
122      DO WHILE( istp <= nitend .AND. nstop == 0 )
123         CALL stp
124         istp = istp + 1
125      END DO
126      !
127      IF( .NOT. Agrif_Root() ) THEN
128         CALL Agrif_ParentGrid_To_ChildGrid()
129         IF( ln_timing )   CALL timing_finalize
130         CALL Agrif_ChildGrid_To_ParentGrid()
131      ENDIF
132      !
133#else
134      !
135      IF( .NOT.ln_diurnal_only ) THEN                 !==  Standard time-stepping  ==!
136         !
137         DO WHILE( istp <= nitend .AND. nstop == 0 )
138#if defined key_mpp_mpi
139            ncom_stp = istp
140            IF ( istp == ( nit000 + 1 ) ) elapsed_time = MPI_Wtime()
141            IF ( istp ==         nitend ) elapsed_time = MPI_Wtime() - elapsed_time
142#endif
143            CALL stp        ( istp ) 
144            istp = istp + 1
145         END DO
146         !
147      ELSE                                            !==  diurnal SST time-steeping only  ==!
148         !
149         DO WHILE( istp <= nitend .AND. nstop == 0 )
150            CALL stp_diurnal( istp )   ! time step only the diurnal SST
151            istp = istp + 1
152         END DO
153         !
154      ENDIF
155      !
156#endif
157      !
158      IF( ln_icebergs )   CALL icb_end( nitend )
159
160      !                            !------------------------!
161      !                            !==  finalize the run  ==!
162      !                            !------------------------!
163      IF(lwp) WRITE(numout,cform_aaa)        ! Flag AAAAAAA
164      !
165      IF( nstop /= 0 .AND. lwp ) THEN        ! error print
166         WRITE(ctmp1,*) '   ==>>>   nemo_gcm: a total of ', nstop, ' errors have been found'
167         CALL ctl_stop( ctmp1 )
168      ENDIF
169      !
170      IF( ln_timing )   CALL timing_finalize
171      !
172      CALL nemo_closefile
173      !
174#if defined key_iomput
175                                    CALL xios_finalize  ! end mpp communications with xios
176      IF( lk_oasis     )            CALL cpl_finalize   ! end coupling and mpp communications with OASIS
177#else
178      IF    ( lk_oasis ) THEN   ;   CALL cpl_finalize   ! end coupling and mpp communications with OASIS
179      ELSEIF( lk_mpp   ) THEN   ;   CALL mppstop        ! end mpp communications
180      ENDIF
181#endif
182      !
183      IF(lwm) THEN
184         IF( nstop == 0 ) THEN   ;   STOP 0
185         ELSE                    ;   STOP 123
186         ENDIF
187      ENDIF
188      !
189   END SUBROUTINE nemo_gcm
190
191
192   SUBROUTINE nemo_init
193      !!----------------------------------------------------------------------
194      !!                     ***  ROUTINE nemo_init  ***
195      !!
196      !! ** Purpose :   initialization of the NEMO GCM
197      !!----------------------------------------------------------------------
198      INTEGER ::   ios, ilocal_comm   ! local integers
199      !!
200      NAMELIST/namctl/ sn_cfctl, nn_print, nn_ictls, nn_ictle,              &
201         &             nn_isplt , nn_jsplt, nn_jctls, nn_jctle,             &
202         &             ln_timing, ln_diacfl
203      NAMELIST/namcfg/ ln_read_cfg, cn_domcfg, ln_closea, ln_write_cfg, cn_domcfg_out, ln_use_jattr
204      !!----------------------------------------------------------------------
205      !
206      IF( lk_oasis ) THEN   ;   cxios_context = 'sas'
207      ELSE                  ;   cxios_context = 'nemo'
208      ENDIF
209      !
210      !                             !-------------------------------------------------!
211      !                             !     set communicator & select the local rank    !
212      !                             !  must be done as soon as possible to get narea  !
213      !                             !-------------------------------------------------!
214      !
215#if defined key_iomput
216      IF( Agrif_Root() ) THEN
217         IF( lk_oasis ) THEN
218            CALL cpl_init( "sas", ilocal_comm )                                  ! nemo local communicator given by oasis
219            CALL xios_initialize( "not used",local_comm=ilocal_comm )            ! send nemo communicator to xios
220         ELSE
221            CALL xios_initialize( "for_xios_mpi_id",return_comm=ilocal_comm )    ! nemo local communicator given by xios
222         ENDIF
223      ENDIF
224      CALL mpp_start( ilocal_comm )
225#else
226      IF( lk_oasis ) THEN
227         IF( Agrif_Root() ) THEN
228            CALL cpl_init( "sas", ilocal_comm )             ! nemo local communicator given by oasis
229         ENDIF
230         CALL mpp_start( ilocal_comm )
231      ELSE
232         CALL mpp_start( )
233      ENDIF
234#endif
235      !
236      narea = mpprank + 1                                   ! mpprank: the rank of proc (0 --> mppsize -1 )
237      lwm = (narea == 1)                ! control of output namelists
238      !
239      !                             !---------------------------------------------------------------!
240      !                             ! Open output files, reference and configuration namelist files !
241      !                             !---------------------------------------------------------------!
242      !
243      ! open ocean.output as soon as possible to get all output prints (including errors messages)
244      IF( lk_oasis ) THEN
245         IF( lwm )   CALL ctl_opn(     numout,               'sas.output', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
246         ! open reference and configuration namelist files
247                     CALL load_nml( numnam_ref,        'namelist_sas_ref',                                           -1, lwm )
248                     CALL load_nml( numnam_cfg,        'namelist_sas_cfg',                                           -1, lwm )
249         IF( lwm )   CALL ctl_opn(      numond, 'output.namelist_sas.dyn', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
250      ELSE
251         IF( lwm )   CALL ctl_opn(      numout,            'ocean.output', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
252         ! open reference and configuration namelist files
253                     CALL load_nml( numnam_ref,            'namelist_ref',                                           -1, lwm )
254                     CALL load_nml( numnam_cfg,            'namelist_cfg',                                           -1, lwm )
255         IF( lwm )   CALL ctl_opn(      numond,     'output.namelist.dyn', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
256      ENDIF
257      ! open /dev/null file to be able to supress output write easily
258                     CALL ctl_opn(     numnul,               '/dev/null', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, -1, .FALSE. )
259      !
260      !                             !--------------------!
261      !                             ! Open listing units !  -> need sn_cfctl from namctl to define lwp
262      !                             !--------------------!
263      !
264      READ  ( numnam_ref, namctl, IOSTAT = ios, ERR = 901 )
265901   IF( ios /= 0 )   CALL ctl_nam ( ios , 'namctl in reference namelist' )
266      READ  ( numnam_cfg, namctl, IOSTAT = ios, ERR = 902 )
267902   IF( ios >  0 )   CALL ctl_nam ( ios , 'namctl in configuration namelist' )
268      !
269      ! finalize the definition of namctl variables
270      IF( sn_cfctl%l_allon ) THEN
271         ! Turn on all options.
272         CALL nemo_set_cfctl( sn_cfctl, .TRUE., .TRUE. )
273         ! Ensure all processors are active
274         sn_cfctl%procmin = 0 ; sn_cfctl%procmax = 1000000 ; sn_cfctl%procincr = 1
275      ELSEIF( sn_cfctl%l_config ) THEN
276         ! Activate finer control of report outputs
277         ! optionally switch off output from selected areas (note this only
278         ! applies to output which does not involve global communications)
279         IF( ( narea < sn_cfctl%procmin .OR. narea > sn_cfctl%procmax  ) .OR. &
280           & ( MOD( narea - sn_cfctl%procmin, sn_cfctl%procincr ) /= 0 ) )    &
281           &   CALL nemo_set_cfctl( sn_cfctl, .FALSE., .FALSE. )
282      ELSE
283         ! turn off all options.
284         CALL nemo_set_cfctl( sn_cfctl, .FALSE., .TRUE. )
285      ENDIF
286      !
287      lwp = (narea == 1) .OR. sn_cfctl%l_oceout    ! control of all listing output print
288      !
289      IF(lwp) THEN                      ! open listing units
290         !
291         IF( .NOT. lwm ) THEN           ! alreay opened for narea == 1
292            IF(lk_oasis) THEN   ;   CALL ctl_opn( numout,   'sas.output','REPLACE','FORMATTED','SEQUENTIAL',-1,-1, .FALSE., narea )
293            ELSE                ;   CALL ctl_opn( numout, 'ocean.output','REPLACE','FORMATTED','SEQUENTIAL',-1,-1, .FALSE., narea )
294            ENDIF
295         ENDIF
296         !
297         WRITE(numout,*)
298         WRITE(numout,*) '   CNRS - NERC - Met OFFICE - MERCATOR-ocean - CMCC'
299         WRITE(numout,*) '                       NEMO team'
300         WRITE(numout,*) '            Ocean General Circulation Model'
301         WRITE(numout,*) '                NEMO version 4.0  (2019) '
302         WRITE(numout,*) '             StandAlone Surface version (SAS) '
303         WRITE(numout,*) "           ._      ._      ._      ._      ._    "
304         WRITE(numout,*) "       _.-._)`\_.-._)`\_.-._)`\_.-._)`\_.-._)`\_ "
305         WRITE(numout,*)
306         WRITE(numout,*) "           o         _,           _,             "
307         WRITE(numout,*) "            o      .' (        .-' /             "
308         WRITE(numout,*) "           o     _/..._'.    .'   /              "
309         WRITE(numout,*) "      (    o .-'`      ` '-./  _.'               "
310         WRITE(numout,*) "       )    ( o)           ;= <_         (       "
311         WRITE(numout,*) "      (      '-.,\\__ __.-;`\   '.        )      "
312         WRITE(numout,*) "       )  )       \) |`\ \)  '.   \      (   (   "
313         WRITE(numout,*) "      (  (           \_/       '-._\      )   )  "
314         WRITE(numout,*) "       )  ) jgs                    `     (   (   "
315         WRITE(numout,*) "     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ "
316         WRITE(numout,*)
317         WRITE(numout,*)
318         !
319         WRITE(numout,cform_aaa)                                        ! Flag AAAAAAA
320         !
321      ENDIF
322      !
323      IF(lwm) WRITE( numond, namctl )
324      !
325      !                             !------------------------------------!
326      !                             !  Set global domain size parameters !
327      !                             !------------------------------------!
328      !
329      READ  ( numnam_ref, namcfg, IOSTAT = ios, ERR = 903 )
330903   IF( ios /= 0 )   CALL ctl_nam ( ios , 'namcfg in reference namelist' )
331      READ  ( numnam_cfg, namcfg, IOSTAT = ios, ERR = 904 )
332904   IF( ios >  0 )   CALL ctl_nam ( ios , 'namcfg in configuration namelist' )   
333      !
334      IF( ln_read_cfg ) THEN            ! Read sizes in domain configuration file
335         CALL domain_cfg ( cn_cfg, nn_cfg, jpiglo, jpjglo, jpkglo, jperio )
336      ELSE                              ! user-defined namelist
337         CALL usr_def_nam( cn_cfg, nn_cfg, jpiglo, jpjglo, jpkglo, jperio )
338      ENDIF
339      !
340      IF(lwm)   WRITE( numond, namcfg )
341      !
342      !                             !-----------------------------------------!
343      !                             ! mpp parameters and domain decomposition !
344      !                             !-----------------------------------------!
345      CALL mpp_init
346
347      ! Now we know the dimensions of the grid and numout has been set: we can allocate arrays
348      CALL nemo_alloc()
349
350      ! Initialise time level indices
351      Nbb = 1; Nnn = 2; Naa = 3; Nrhs = Naa
352
353      !                             !-------------------------------!
354      !                             !  NEMO general initialization  !
355      !                             !-------------------------------!
356
357      CALL nemo_ctl                          ! Control prints
358      !
359      !                                      ! General initialization
360      IF( ln_timing    )   CALL timing_init     ! timing
361      IF( ln_timing    )   CALL timing_start( 'nemo_init')
362
363                           CALL phy_cst         ! Physical constants
364                           CALL eos_init        ! Equation of seawater
365                           CALL dom_init( Nbb, Nnn, Naa, 'SAS') ! Domain
366      IF( sn_cfctl%l_prtctl )   &
367         &                 CALL prt_ctl_init        ! Print control
368     
369                           CALL day_init        ! model calendar (using both namelist and restart infos)
370      IF( ln_rstart )      CALL rst_read_open
371
372      !                                      ! external forcing
373                           CALL sbc_init( Nbb, Nnn, Naa )  ! Forcings : surface module
374
375      ! ==> clem: open boundaries init. is mandatory for sea-ice because ice BDY is not decoupled from 
376      !           the environment of ocean BDY. Therefore bdy is called in both OPA and SAS modules.
377      !           This is not clean and should be changed in the future.
378                           CALL bdy_init
379      ! ==>
380                           CALL icb_init( rn_Dt, nit000)   ! initialise icebergs instance
381      !
382      IF(lwp) WRITE(numout,cform_aaa)           ! Flag AAAAAAA
383      !
384      IF( ln_timing    )   CALL timing_stop( 'nemo_init')
385      !
386   END SUBROUTINE nemo_init
387
388
389   SUBROUTINE nemo_ctl
390      !!----------------------------------------------------------------------
391      !!                     ***  ROUTINE nemo_ctl  ***
392      !!
393      !! ** Purpose :   control print setting
394      !!
395      !! ** Method  : - print namctl and namcfg information and check some consistencies
396      !!----------------------------------------------------------------------
397      !
398      IF(lwp) THEN                  ! control print
399         WRITE(numout,*)
400         WRITE(numout,*) 'nemo_ctl: Control prints'
401         WRITE(numout,*) '~~~~~~~~'
402         WRITE(numout,*) '   Namelist namctl'
403         WRITE(numout,*) '                              sn_cfctl%l_glochk  = ', sn_cfctl%l_glochk
404         WRITE(numout,*) '                              sn_cfctl%l_allon   = ', sn_cfctl%l_allon
405         WRITE(numout,*) '       finer control over o/p sn_cfctl%l_config  = ', sn_cfctl%l_config
406         WRITE(numout,*) '                              sn_cfctl%l_runstat = ', sn_cfctl%l_runstat
407         WRITE(numout,*) '                              sn_cfctl%l_trcstat = ', sn_cfctl%l_trcstat
408         WRITE(numout,*) '                              sn_cfctl%l_oceout  = ', sn_cfctl%l_oceout
409         WRITE(numout,*) '                              sn_cfctl%l_layout  = ', sn_cfctl%l_layout
410         WRITE(numout,*) '                              sn_cfctl%l_prtctl  = ', sn_cfctl%l_prtctl
411         WRITE(numout,*) '                              sn_cfctl%l_prttrc  = ', sn_cfctl%l_prttrc
412         WRITE(numout,*) '                              sn_cfctl%l_oasout  = ', sn_cfctl%l_oasout
413         WRITE(numout,*) '                              sn_cfctl%procmin   = ', sn_cfctl%procmin 
414         WRITE(numout,*) '                              sn_cfctl%procmax   = ', sn_cfctl%procmax 
415         WRITE(numout,*) '                              sn_cfctl%procincr  = ', sn_cfctl%procincr 
416         WRITE(numout,*) '                              sn_cfctl%ptimincr  = ', sn_cfctl%ptimincr 
417         WRITE(numout,*) '      level of print                  nn_print   = ', nn_print
418         WRITE(numout,*) '      Start i indice for SUM control  nn_ictls   = ', nn_ictls
419         WRITE(numout,*) '      End i indice for SUM control    nn_ictle   = ', nn_ictle
420         WRITE(numout,*) '      Start j indice for SUM control  nn_jctls   = ', nn_jctls
421         WRITE(numout,*) '      End j indice for SUM control    nn_jctle   = ', nn_jctle
422         WRITE(numout,*) '      number of proc. following i     nn_isplt   = ', nn_isplt
423         WRITE(numout,*) '      number of proc. following j     nn_jsplt   = ', nn_jsplt
424         WRITE(numout,*) '      timing by routine               ln_timing  = ', ln_timing
425         WRITE(numout,*) '      CFL diagnostics                 ln_diacfl  = ', ln_diacfl
426      ENDIF
427      !
428      nprint    = nn_print          ! convert DOCTOR namelist names into OLD names
429      nictls    = nn_ictls
430      nictle    = nn_ictle
431      njctls    = nn_jctls
432      njctle    = nn_jctle
433      isplt     = nn_isplt
434      jsplt     = nn_jsplt
435
436      IF(lwp) THEN                  ! control print
437         WRITE(numout,*)
438         WRITE(numout,*) '   Namelist namcfg'
439         WRITE(numout,*) '      read domain configuration file                ln_read_cfg      = ', ln_read_cfg
440         WRITE(numout,*) '         filename to be read                           cn_domcfg     = ', TRIM(cn_domcfg)
441         WRITE(numout,*) '         keep closed seas in the domain (if exist)     ln_closea     = ', ln_closea
442         WRITE(numout,*) '      create a configuration definition file        ln_write_cfg     = ', ln_write_cfg
443         WRITE(numout,*) '         filename to be written                        cn_domcfg_out = ', TRIM(cn_domcfg_out)
444         WRITE(numout,*) '      use file attribute if exists as i/p j-start   ln_use_jattr     = ', ln_use_jattr
445      ENDIF
446      IF( .NOT.ln_read_cfg )   ln_closea = .false.   ! dealing possible only with a domcfg file
447      !
448      !                             ! Parameter control
449      !
450      IF( sn_cfctl%l_prtctl .OR. sn_cfctl%l_prttrc ) THEN              ! sub-domain area indices for the control prints
451         IF( lk_mpp .AND. jpnij > 1 ) THEN
452            isplt = jpni   ;   jsplt = jpnj   ;   ijsplt = jpni*jpnj   ! the domain is forced to the real split domain
453         ELSE
454            IF( isplt == 1 .AND. jsplt == 1  ) THEN
455               CALL ctl_warn( ' - isplt & jsplt are equal to 1',   &
456                  &           ' - the print control will be done over the whole domain' )
457            ENDIF
458            ijsplt = isplt * jsplt            ! total number of processors ijsplt
459         ENDIF
460         IF(lwp) WRITE(numout,*)'          - The total number of processors over which the'
461         IF(lwp) WRITE(numout,*)'            print control will be done is ijsplt : ', ijsplt
462         !
463         !                              ! indices used for the SUM control
464         IF( nictls+nictle+njctls+njctle == 0 )   THEN    ! print control done over the default area
465            lsp_area = .FALSE.
466         ELSE                                             ! print control done over a specific  area
467            lsp_area = .TRUE.
468            IF( nictls < 1 .OR. nictls > jpiglo )   THEN
469               CALL ctl_warn( '          - nictls must be 1<=nictls>=jpiglo, it is forced to 1' )
470               nictls = 1
471            ENDIF
472            IF( nictle < 1 .OR. nictle > jpiglo )   THEN
473               CALL ctl_warn( '          - nictle must be 1<=nictle>=jpiglo, it is forced to jpiglo' )
474               nictle = jpiglo
475            ENDIF
476            IF( njctls < 1 .OR. njctls > jpjglo )   THEN
477               CALL ctl_warn( '          - njctls must be 1<=njctls>=jpjglo, it is forced to 1' )
478               njctls = 1
479            ENDIF
480            IF( njctle < 1 .OR. njctle > jpjglo )   THEN
481               CALL ctl_warn( '          - njctle must be 1<=njctle>=jpjglo, it is forced to jpjglo' )
482               njctle = jpjglo
483            ENDIF
484         ENDIF
485      ENDIF
486      !
487      IF( 1._wp /= SIGN(1._wp,-0._wp)  )   CALL ctl_stop( 'nemo_ctl: The intrinsec SIGN function follows f2003 standard.',  &
488         &                                                'Compile with key_nosignedzero enabled:',   &
489         &                                                '--> add -Dkey_nosignedzero to the definition of %CPP in your arch file' )
490      !
491#if defined key_agrif
492      IF( ln_timing )   CALL ctl_stop( 'AGRIF not implemented with ln_timing = true')
493#endif
494      !
495   END SUBROUTINE nemo_ctl
496
497
498   SUBROUTINE nemo_closefile
499      !!----------------------------------------------------------------------
500      !!                     ***  ROUTINE nemo_closefile  ***
501      !!
502      !! ** Purpose :   Close the files
503      !!----------------------------------------------------------------------
504      !
505      IF( lk_mpp )   CALL mppsync
506      !
507      CALL iom_close                                 ! close all input/output files managed by iom_*
508      !
509      IF( numstp          /= -1 )   CLOSE( numstp          )   ! time-step file     
510      IF( numrun          /= -1 )   CLOSE( numrun          )   ! run statistics file
511      IF( lwm.AND.numond  /= -1 )   CLOSE( numond          )   ! oce output namelist
512      IF( lwm.AND.numoni  /= -1 )   CLOSE( numoni          )   ! ice output namelist
513      IF( numevo_ice      /= -1 )   CLOSE( numevo_ice      )   ! ice variables (temp. evolution)
514      IF( numout          /=  6 )   CLOSE( numout          )   ! standard model output file
515      !
516      numout = 6                                     ! redefine numout in case it is used after this point...
517      !
518   END SUBROUTINE nemo_closefile
519
520
521   SUBROUTINE nemo_alloc
522      !!----------------------------------------------------------------------
523      !!                     ***  ROUTINE nemo_alloc  ***
524      !!
525      !! ** Purpose :   Allocate all the dynamic arrays of the OPA modules
526      !!
527      !! ** Method  :
528      !!----------------------------------------------------------------------
529      USE diawri    , ONLY : dia_wri_alloc
530      USE dom_oce   , ONLY : dom_oce_alloc
531      USE bdy_oce   , ONLY : ln_bdy, bdy_oce_alloc
532      USE oce       ! mandatory for sea-ice because needed for bdy arrays
533      !
534      INTEGER :: ierr
535      !!----------------------------------------------------------------------
536      !
537      ierr =        dia_wri_alloc()
538      ierr = ierr + dom_oce_alloc()          ! ocean domain
539      ierr = ierr + oce_alloc    ()          ! (tsn...) needed for agrif and/or SI3 and bdy
540      ierr = ierr + bdy_oce_alloc()          ! bdy masks (incl. initialization)
541      !
542      CALL mpp_sum( 'nemogcm', ierr )
543      IF( ierr /= 0 )   CALL ctl_stop( 'STOP', 'nemo_alloc: unable to allocate standard ocean arrays' )
544      !
545   END SUBROUTINE nemo_alloc
546
547   SUBROUTINE nemo_set_cfctl(sn_cfctl, setto, for_all )
548      !!----------------------------------------------------------------------
549      !!                     ***  ROUTINE nemo_set_cfctl  ***
550      !!
551      !! ** Purpose :   Set elements of the output control structure to setto.
552      !!                for_all should be .false. unless all areas are to be
553      !!                treated identically.
554      !!
555      !! ** Method  :   Note this routine can be used to switch on/off some
556      !!                types of output for selected areas but any output types
557      !!                that involve global communications (e.g. mpp_max, glob_sum)
558      !!                should be protected from selective switching by the
559      !!                for_all argument
560      !!----------------------------------------------------------------------
561      LOGICAL :: setto, for_all
562      TYPE(sn_ctl) :: sn_cfctl
563      !!----------------------------------------------------------------------
564      IF( for_all ) THEN
565         sn_cfctl%l_runstat = setto
566         sn_cfctl%l_trcstat = setto
567      ENDIF
568      sn_cfctl%l_oceout  = setto
569      sn_cfctl%l_layout  = setto
570      sn_cfctl%l_prtctl  = setto
571      sn_cfctl%l_prttrc  = setto
572      sn_cfctl%l_oasout  = setto
573   END SUBROUTINE nemo_set_cfctl
574
575   !!======================================================================
576END MODULE nemogcm
577
Note: See TracBrowser for help on using the repository browser.