| 1 | MODULE icedyn_rdgrft |
|---|
| 2 | !!====================================================================== |
|---|
| 3 | !! *** MODULE icedyn_rdgrft *** |
|---|
| 4 | !! sea-ice : Mechanical impact on ice thickness distribution |
|---|
| 5 | !!====================================================================== |
|---|
| 6 | !! History : ! 2006-02 (M. Vancoppenolle) Original code |
|---|
| 7 | !! 4.0 ! 2018 (many people) SI3 [aka Sea Ice cube] |
|---|
| 8 | !!---------------------------------------------------------------------- |
|---|
| 9 | #if defined key_si3 |
|---|
| 10 | !!---------------------------------------------------------------------- |
|---|
| 11 | !! 'key_si3' SI3 sea-ice model |
|---|
| 12 | !!---------------------------------------------------------------------- |
|---|
| 13 | !! ice_dyn_rdgrft : ridging/rafting of sea ice |
|---|
| 14 | !! ice_dyn_rdgrft_init : initialization of ridging/rafting of sea ice |
|---|
| 15 | !! ice_strength : ice strength calculation |
|---|
| 16 | !!---------------------------------------------------------------------- |
|---|
| 17 | USE dom_oce ! ocean domain |
|---|
| 18 | USE phycst ! physical constants (ocean directory) |
|---|
| 19 | USE sbc_oce , ONLY : sss_m, sst_m ! surface boundary condition: ocean fields |
|---|
| 20 | USE ice1D ! sea-ice: thermodynamics |
|---|
| 21 | USE ice ! sea-ice: variables |
|---|
| 22 | USE icetab ! sea-ice: 1D <==> 2D transformation |
|---|
| 23 | USE icevar ! sea-ice: operations |
|---|
| 24 | USE icectl ! sea-ice: control prints |
|---|
| 25 | ! |
|---|
| 26 | USE in_out_manager ! I/O manager |
|---|
| 27 | USE iom ! I/O manager library |
|---|
| 28 | USE lib_mpp ! MPP library |
|---|
| 29 | USE lib_fortran ! fortran utilities (glob_sum + no signed zero) |
|---|
| 30 | USE lbclnk ! lateral boundary conditions (or mpp links) |
|---|
| 31 | USE timing ! Timing |
|---|
| 32 | |
|---|
| 33 | IMPLICIT NONE |
|---|
| 34 | PRIVATE |
|---|
| 35 | |
|---|
| 36 | PUBLIC ice_dyn_rdgrft ! called by icestp |
|---|
| 37 | PUBLIC ice_dyn_rdgrft_init ! called by icedyn |
|---|
| 38 | PUBLIC ice_strength ! called by icedyn_rhg_evp |
|---|
| 39 | |
|---|
| 40 | ! Variables shared among ridging subroutines |
|---|
| 41 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:) :: closing_net ! net rate at which area is removed (1/s) |
|---|
| 42 | ! ! (ridging ice area - area of new ridges) / dt |
|---|
| 43 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:) :: opning ! rate of opening due to divergence/shear |
|---|
| 44 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:) :: closing_gross ! rate at which area removed, not counting area of new ridges |
|---|
| 45 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) :: apartf ! participation function; fraction of ridging/closing associated w/ category n |
|---|
| 46 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) :: hrmin ! minimum ridge thickness |
|---|
| 47 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) :: hrmax ! maximum ridge thickness |
|---|
| 48 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) :: hraft ! thickness of rafted ice |
|---|
| 49 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) :: hi_hrdg ! thickness of ridging ice / mean ridge thickness |
|---|
| 50 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) :: aridge ! participating ice ridging |
|---|
| 51 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) :: araft ! participating ice rafting |
|---|
| 52 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:,:) :: ze_i_2d |
|---|
| 53 | REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:,:) :: ze_s_2d |
|---|
| 54 | ! |
|---|
| 55 | REAL(wp), PARAMETER :: hrdg_hi_min = 1.1_wp ! min ridge thickness multiplier: min(hrdg/hi) |
|---|
| 56 | REAL(wp), PARAMETER :: hi_hrft = 0.5_wp ! rafting multipliyer: (hi/hraft) |
|---|
| 57 | ! |
|---|
| 58 | ! ** namelist (namdyn_rdgrft) ** |
|---|
| 59 | LOGICAL :: ln_str_H79 ! ice strength parameterization (Hibler79) |
|---|
| 60 | REAL(wp) :: rn_pstar ! determines ice strength, Hibler JPO79 |
|---|
| 61 | REAL(wp) :: rn_csrdg ! fraction of shearing energy contributing to ridging |
|---|
| 62 | LOGICAL :: ln_partf_lin ! participation function linear (Thorndike et al. (1975)) |
|---|
| 63 | REAL(wp) :: rn_gstar ! fractional area of young ice contributing to ridging |
|---|
| 64 | LOGICAL :: ln_partf_exp ! participation function exponential (Lipscomb et al. (2007)) |
|---|
| 65 | REAL(wp) :: rn_astar ! equivalent of G* for an exponential participation function |
|---|
| 66 | LOGICAL :: ln_ridging ! ridging of ice or not |
|---|
| 67 | REAL(wp) :: rn_hstar ! thickness that determines the maximal thickness of ridged ice |
|---|
| 68 | REAL(wp) :: rn_porordg ! initial porosity of ridges (0.3 regular value) |
|---|
| 69 | REAL(wp) :: rn_fsnwrdg ! fractional snow loss to the ocean during ridging |
|---|
| 70 | REAL(wp) :: rn_fpndrdg ! fractional pond loss to the ocean during ridging |
|---|
| 71 | LOGICAL :: ln_rafting ! rafting of ice or not |
|---|
| 72 | REAL(wp) :: rn_hraft ! threshold thickness (m) for rafting / ridging |
|---|
| 73 | REAL(wp) :: rn_craft ! coefficient for smoothness of the hyperbolic tangent in rafting |
|---|
| 74 | REAL(wp) :: rn_fsnwrft ! fractional snow loss to the ocean during rafting |
|---|
| 75 | REAL(wp) :: rn_fpndrft ! fractional pond loss to the ocean during rafting |
|---|
| 76 | ! |
|---|
| 77 | !! * Substitutions |
|---|
| 78 | # include "do_loop_substitute.h90" |
|---|
| 79 | !!---------------------------------------------------------------------- |
|---|
| 80 | !! NEMO/ICE 4.0 , NEMO Consortium (2018) |
|---|
| 81 | !! $Id$ |
|---|
| 82 | !! Software governed by the CeCILL licence (./LICENSE) |
|---|
| 83 | !!---------------------------------------------------------------------- |
|---|
| 84 | CONTAINS |
|---|
| 85 | |
|---|
| 86 | INTEGER FUNCTION ice_dyn_rdgrft_alloc() |
|---|
| 87 | !!------------------------------------------------------------------- |
|---|
| 88 | !! *** ROUTINE ice_dyn_rdgrft_alloc *** |
|---|
| 89 | !!------------------------------------------------------------------- |
|---|
| 90 | ALLOCATE( closing_net(jpij) , opning(jpij) , closing_gross(jpij) , & |
|---|
| 91 | & apartf(jpij,0:jpl) , hrmin (jpij,jpl) , hraft(jpij,jpl) , aridge(jpij,jpl), & |
|---|
| 92 | & hrmax (jpij,jpl) , hi_hrdg(jpij,jpl) , araft(jpij,jpl) , & |
|---|
| 93 | & ze_i_2d(jpij,nlay_i,jpl), ze_s_2d(jpij,nlay_s,jpl), STAT=ice_dyn_rdgrft_alloc ) |
|---|
| 94 | |
|---|
| 95 | CALL mpp_sum ( 'icedyn_rdgrft', ice_dyn_rdgrft_alloc ) |
|---|
| 96 | IF( ice_dyn_rdgrft_alloc /= 0 ) CALL ctl_stop( 'STOP', 'ice_dyn_rdgrft_alloc: failed to allocate arrays' ) |
|---|
| 97 | ! |
|---|
| 98 | END FUNCTION ice_dyn_rdgrft_alloc |
|---|
| 99 | |
|---|
| 100 | |
|---|
| 101 | SUBROUTINE ice_dyn_rdgrft( kt ) |
|---|
| 102 | !!------------------------------------------------------------------- |
|---|
| 103 | !! *** ROUTINE ice_dyn_rdgrft *** |
|---|
| 104 | !! |
|---|
| 105 | !! ** Purpose : computes the mechanical redistribution of ice thickness |
|---|
| 106 | !! |
|---|
| 107 | !! ** Method : Steps : |
|---|
| 108 | !! 0) Identify grid cells with ice |
|---|
| 109 | !! 1) Calculate closing rate, divergence and opening |
|---|
| 110 | !! 2) Identify grid cells with ridging |
|---|
| 111 | !! 3) Start ridging iterations |
|---|
| 112 | !! - prep = ridged and rafted ice + closing_gross |
|---|
| 113 | !! - shift = move ice from one category to another |
|---|
| 114 | !! |
|---|
| 115 | !! ** Details |
|---|
| 116 | !! step1: The net rate of closing is due to convergence and shear, based on Flato and Hibler (1995). |
|---|
| 117 | !! The energy dissipation rate is equal to the net closing rate times the ice strength. |
|---|
| 118 | !! |
|---|
| 119 | !! step3: The gross closing rate is equal to the first two terms (open |
|---|
| 120 | !! water closing and thin ice ridging) without the third term |
|---|
| 121 | !! (thick, newly ridged ice). |
|---|
| 122 | !! |
|---|
| 123 | !! References : Flato, G. M., and W. D. Hibler III, 1995, JGR, 100, 18,611-18,626. |
|---|
| 124 | !! Hibler, W. D. III, 1980, MWR, 108, 1943-1973, 1980. |
|---|
| 125 | !! Rothrock, D. A., 1975: JGR, 80, 4514-4519. |
|---|
| 126 | !! Thorndike et al., 1975, JGR, 80, 4501-4513. |
|---|
| 127 | !! Bitz et al., JGR, 2001 |
|---|
| 128 | !! Amundrud and Melling, JGR 2005 |
|---|
| 129 | !! Babko et al., JGR 2002 |
|---|
| 130 | !! |
|---|
| 131 | !! This routine is based on CICE code and authors William H. Lipscomb, |
|---|
| 132 | !! and Elizabeth C. Hunke, LANL are gratefully acknowledged |
|---|
| 133 | !!------------------------------------------------------------------- |
|---|
| 134 | INTEGER, INTENT(in) :: kt ! number of iteration |
|---|
| 135 | !! |
|---|
| 136 | INTEGER :: ji, jj, jk, jl ! dummy loop index |
|---|
| 137 | INTEGER :: iter, iterate_ridging ! local integer |
|---|
| 138 | INTEGER :: ipti ! local integer |
|---|
| 139 | REAL(wp) :: zfac ! local scalar |
|---|
| 140 | INTEGER , DIMENSION(jpij) :: iptidx ! compute ridge/raft or not |
|---|
| 141 | REAL(wp), DIMENSION(jpij) :: zdivu, zdelt ! 1D divu_i & delta_i |
|---|
| 142 | REAL(wp), DIMENSION(jpij) :: zconv ! 1D rdg_conv (if EAP rheology) |
|---|
| 143 | ! |
|---|
| 144 | INTEGER, PARAMETER :: jp_itermax = 20 |
|---|
| 145 | !!------------------------------------------------------------------- |
|---|
| 146 | ! controls |
|---|
| 147 | IF( ln_timing ) CALL timing_start('icedyn_rdgrft') ! timing |
|---|
| 148 | IF( ln_icediachk ) CALL ice_cons_hsm(0, 'icedyn_rdgrft', rdiag_v, rdiag_s, rdiag_t, rdiag_fv, rdiag_fs, rdiag_ft) ! conservation |
|---|
| 149 | IF( ln_icediachk ) CALL ice_cons2D (0, 'icedyn_rdgrft', diag_v, diag_s, diag_t, diag_fv, diag_fs, diag_ft) ! conservation |
|---|
| 150 | |
|---|
| 151 | IF( kt == nit000 ) THEN |
|---|
| 152 | IF(lwp) WRITE(numout,*) |
|---|
| 153 | IF(lwp) WRITE(numout,*)'ice_dyn_rdgrft: ice ridging and rafting' |
|---|
| 154 | IF(lwp) WRITE(numout,*)'~~~~~~~~~~~~~~' |
|---|
| 155 | ENDIF |
|---|
| 156 | |
|---|
| 157 | !-------------------------------- |
|---|
| 158 | ! 0) Identify grid cells with ice |
|---|
| 159 | !-------------------------------- |
|---|
| 160 | at_i(:,:) = SUM( a_i, dim=3 ) |
|---|
| 161 | ! |
|---|
| 162 | npti = 0 ; nptidx(:) = 0 |
|---|
| 163 | ipti = 0 ; iptidx(:) = 0 |
|---|
| 164 | DO_2D( 1, 1, 1, 1 ) |
|---|
| 165 | IF ( at_i(ji,jj) > epsi10 ) THEN |
|---|
| 166 | npti = npti + 1 |
|---|
| 167 | nptidx( npti ) = (jj - 1) * jpi + ji |
|---|
| 168 | ENDIF |
|---|
| 169 | END_2D |
|---|
| 170 | |
|---|
| 171 | !-------------------------------------------------------- |
|---|
| 172 | ! 1) Dynamical inputs (closing rate, divergence, opening) |
|---|
| 173 | !-------------------------------------------------------- |
|---|
| 174 | IF( npti > 0 ) THEN |
|---|
| 175 | |
|---|
| 176 | ! just needed here |
|---|
| 177 | CALL tab_2d_1d( npti, nptidx(1:npti), zdelt (1:npti) , delta_i ) |
|---|
| 178 | CALL tab_2d_1d( npti, nptidx(1:npti), zconv (1:npti) , rdg_conv ) |
|---|
| 179 | ! needed here and in the iteration loop |
|---|
| 180 | CALL tab_2d_1d( npti, nptidx(1:npti), zdivu (1:npti) , divu_i) ! zdivu is used as a work array here (no change in divu_i) |
|---|
| 181 | CALL tab_3d_2d( npti, nptidx(1:npti), a_i_2d (1:npti,1:jpl), a_i ) |
|---|
| 182 | CALL tab_3d_2d( npti, nptidx(1:npti), v_i_2d (1:npti,1:jpl), v_i ) |
|---|
| 183 | CALL tab_2d_1d( npti, nptidx(1:npti), ato_i_1d(1:npti) , ato_i ) |
|---|
| 184 | |
|---|
| 185 | DO ji = 1, npti |
|---|
| 186 | ! closing_net = rate at which open water area is removed + ice area removed by ridging |
|---|
| 187 | ! - ice area added in new ridges |
|---|
| 188 | IF( ln_rhg_EVP ) closing_net(ji) = rn_csrdg * 0.5_wp * ( zdelt(ji) - ABS( zdivu(ji) ) ) - MIN( zdivu(ji), 0._wp ) |
|---|
| 189 | IF( ln_rhg_EAP ) closing_net(ji) = zconv(ji) |
|---|
| 190 | ! |
|---|
| 191 | IF( zdivu(ji) < 0._wp ) closing_net(ji) = MAX( closing_net(ji), -zdivu(ji) ) ! make sure the closing rate is large enough |
|---|
| 192 | ! ! to give asum = 1.0 after ridging |
|---|
| 193 | ! Opening rate (non-negative) that will give asum = 1.0 after ridging. |
|---|
| 194 | opning(ji) = closing_net(ji) + zdivu(ji) |
|---|
| 195 | END DO |
|---|
| 196 | ! |
|---|
| 197 | !------------------------------------ |
|---|
| 198 | ! 2) Identify grid cells with ridging |
|---|
| 199 | !------------------------------------ |
|---|
| 200 | CALL rdgrft_prep( a_i_2d, v_i_2d, ato_i_1d, closing_net ) |
|---|
| 201 | |
|---|
| 202 | DO ji = 1, npti |
|---|
| 203 | IF( SUM( apartf(ji,1:jpl) ) > 0._wp .AND. closing_gross(ji) > 0._wp ) THEN |
|---|
| 204 | ipti = ipti + 1 |
|---|
| 205 | iptidx (ipti) = nptidx (ji) |
|---|
| 206 | ! adjust to new indices |
|---|
| 207 | a_i_2d (ipti,:) = a_i_2d (ji,:) |
|---|
| 208 | v_i_2d (ipti,:) = v_i_2d (ji,:) |
|---|
| 209 | ato_i_1d (ipti) = ato_i_1d (ji) |
|---|
| 210 | closing_net(ipti) = closing_net(ji) |
|---|
| 211 | zdivu (ipti) = zdivu (ji) |
|---|
| 212 | opning (ipti) = opning (ji) |
|---|
| 213 | ENDIF |
|---|
| 214 | END DO |
|---|
| 215 | |
|---|
| 216 | ENDIF |
|---|
| 217 | |
|---|
| 218 | ! grid cells with ridging |
|---|
| 219 | nptidx(:) = iptidx(:) |
|---|
| 220 | npti = ipti |
|---|
| 221 | |
|---|
| 222 | !----------------- |
|---|
| 223 | ! 3) Start ridging |
|---|
| 224 | !----------------- |
|---|
| 225 | IF( npti > 0 ) THEN |
|---|
| 226 | |
|---|
| 227 | CALL ice_dyn_1d2d( 1 ) ! --- Move to 1D arrays --- ! |
|---|
| 228 | |
|---|
| 229 | iter = 1 |
|---|
| 230 | iterate_ridging = 1 |
|---|
| 231 | ! !----------------------! |
|---|
| 232 | DO WHILE( iterate_ridging > 0 .AND. iter < jp_itermax ) ! ridging iterations ! |
|---|
| 233 | ! !----------------------! |
|---|
| 234 | ! Calculate participation function (apartf) |
|---|
| 235 | ! and transfer function |
|---|
| 236 | ! and closing_gross (+correction on opening) |
|---|
| 237 | CALL rdgrft_prep( a_i_2d, v_i_2d, ato_i_1d, closing_net ) |
|---|
| 238 | |
|---|
| 239 | ! Redistribute area, volume, and energy between categories |
|---|
| 240 | CALL rdgrft_shift |
|---|
| 241 | |
|---|
| 242 | ! Do we keep on iterating? |
|---|
| 243 | !------------------------- |
|---|
| 244 | ! Check whether a_i + ato_i = 0 |
|---|
| 245 | ! If not, because the closing and opening rates were reduced above, ridge again with new rates |
|---|
| 246 | iterate_ridging = 0 |
|---|
| 247 | DO ji = 1, npti |
|---|
| 248 | zfac = 1._wp - ( ato_i_1d(ji) + SUM( a_i_2d(ji,:) ) ) |
|---|
| 249 | IF( ABS( zfac ) < epsi10 ) THEN |
|---|
| 250 | closing_net(ji) = 0._wp |
|---|
| 251 | opning (ji) = 0._wp |
|---|
| 252 | ato_i_1d (ji) = MAX( 0._wp, 1._wp - SUM( a_i_2d(ji,:) ) ) |
|---|
| 253 | ELSE |
|---|
| 254 | iterate_ridging = 1 |
|---|
| 255 | zdivu (ji) = zfac * r1_Dt_ice |
|---|
| 256 | closing_net(ji) = MAX( 0._wp, -zdivu(ji) ) |
|---|
| 257 | opning (ji) = MAX( 0._wp, zdivu(ji) ) |
|---|
| 258 | ENDIF |
|---|
| 259 | END DO |
|---|
| 260 | ! |
|---|
| 261 | iter = iter + 1 |
|---|
| 262 | IF( iter > jp_itermax ) CALL ctl_stop( 'STOP', 'icedyn_rdgrft: non-converging ridging scheme' ) |
|---|
| 263 | ! |
|---|
| 264 | END DO |
|---|
| 265 | |
|---|
| 266 | CALL ice_dyn_1d2d( 2 ) ! --- Move to 2D arrays --- ! |
|---|
| 267 | |
|---|
| 268 | ENDIF |
|---|
| 269 | |
|---|
| 270 | CALL ice_var_agg( 1 ) |
|---|
| 271 | |
|---|
| 272 | ! controls |
|---|
| 273 | IF( sn_cfctl%l_prtctl ) CALL ice_prt3D ('icedyn_rdgrft') ! prints |
|---|
| 274 | IF( ln_icectl ) CALL ice_prt (kt, iiceprt, jiceprt,-1, ' - ice dyn rdgrft - ') ! prints |
|---|
| 275 | IF( ln_icediachk ) CALL ice_cons_hsm(1, 'icedyn_rdgrft', rdiag_v, rdiag_s, rdiag_t, rdiag_fv, rdiag_fs, rdiag_ft) ! conservation |
|---|
| 276 | IF( ln_icediachk ) CALL ice_cons2D (1, 'icedyn_rdgrft', diag_v, diag_s, diag_t, diag_fv, diag_fs, diag_ft) ! conservation |
|---|
| 277 | IF( ln_timing ) CALL timing_stop ('icedyn_rdgrft') ! timing |
|---|
| 278 | ! |
|---|
| 279 | END SUBROUTINE ice_dyn_rdgrft |
|---|
| 280 | |
|---|
| 281 | |
|---|
| 282 | SUBROUTINE rdgrft_prep( pa_i, pv_i, pato_i, pclosing_net ) |
|---|
| 283 | !!------------------------------------------------------------------- |
|---|
| 284 | !! *** ROUTINE rdgrft_prep *** |
|---|
| 285 | !! |
|---|
| 286 | !! ** Purpose : preparation for ridging calculations |
|---|
| 287 | !! |
|---|
| 288 | !! ** Method : Compute the thickness distribution of the ice and open water |
|---|
| 289 | !! participating in ridging and of the resulting ridges. |
|---|
| 290 | !!------------------------------------------------------------------- |
|---|
| 291 | REAL(wp), DIMENSION(:) , INTENT(in) :: pato_i, pclosing_net |
|---|
| 292 | REAL(wp), DIMENSION(:,:), INTENT(in) :: pa_i, pv_i |
|---|
| 293 | !! |
|---|
| 294 | INTEGER :: ji, jl ! dummy loop indices |
|---|
| 295 | REAL(wp) :: z1_gstar, z1_astar, zhmean, zfac ! local scalar |
|---|
| 296 | REAL(wp), DIMENSION(jpij) :: zasum, z1_asum, zaksum ! sum of a_i+ato_i and reverse |
|---|
| 297 | REAL(wp), DIMENSION(jpij,jpl) :: zhi ! ice thickness |
|---|
| 298 | REAL(wp), DIMENSION(jpij,-1:jpl) :: zGsum ! zGsum(n) = sum of areas in categories 0 to n |
|---|
| 299 | !-------------------------------------------------------------------- |
|---|
| 300 | |
|---|
| 301 | z1_gstar = 1._wp / rn_gstar |
|---|
| 302 | z1_astar = 1._wp / rn_astar |
|---|
| 303 | |
|---|
| 304 | ! ! Ice thickness needed for rafting |
|---|
| 305 | ! In single precision there were floating point invalids due a sqrt of zhi which happens to have negative values |
|---|
| 306 | ! To solve that an extra check about the value of pv_i was added. |
|---|
| 307 | ! Although adding this condition is safe, the double definition (one for single other for double) has been kept to preserve the results of the sette test. |
|---|
| 308 | #if defined key_single |
|---|
| 309 | |
|---|
| 310 | WHERE( pa_i(1:npti,:) > epsi10 .and. pv_i(1:npti,:) > epsi10 ) ; zhi(1:npti,:) = pv_i(1:npti,:) / pa_i(1:npti,:) |
|---|
| 311 | #else |
|---|
| 312 | WHERE( pa_i(1:npti,:) > epsi10 ) ; zhi(1:npti,:) = pv_i(1:npti,:) / pa_i(1:npti,:) |
|---|
| 313 | #endif |
|---|
| 314 | ELSEWHERE ; zhi(1:npti,:) = 0._wp |
|---|
| 315 | END WHERE |
|---|
| 316 | |
|---|
| 317 | ! 1) Participation function (apartf): a(h) = b(h).g(h) |
|---|
| 318 | !----------------------------------------------------------------- |
|---|
| 319 | ! Compute the participation function = total area lost due to ridging/closing |
|---|
| 320 | ! This is analogous to |
|---|
| 321 | ! a(h) = b(h)g(h) as defined in Thorndike et al. (1975). |
|---|
| 322 | ! assuming b(h) = (2/Gstar) * (1 - G(h)/Gstar). |
|---|
| 323 | ! |
|---|
| 324 | ! apartf = integrating b(h)g(h) between the category boundaries |
|---|
| 325 | ! apartf is always >= 0 and SUM(apartf(0:jpl))=1 |
|---|
| 326 | !----------------------------------------------------------------- |
|---|
| 327 | ! |
|---|
| 328 | ! Compute total area of ice plus open water. |
|---|
| 329 | ! This is in general not equal to one because of divergence during transport |
|---|
| 330 | zasum(1:npti) = pato_i(1:npti) + SUM( pa_i(1:npti,:), dim=2 ) |
|---|
| 331 | ! |
|---|
| 332 | WHERE( zasum(1:npti) > epsi10 ) ; z1_asum(1:npti) = 1._wp / zasum(1:npti) |
|---|
| 333 | ELSEWHERE ; z1_asum(1:npti) = 0._wp |
|---|
| 334 | END WHERE |
|---|
| 335 | ! |
|---|
| 336 | ! Compute cumulative thickness distribution function |
|---|
| 337 | ! Compute the cumulative thickness distribution function zGsum, |
|---|
| 338 | ! where zGsum(n) is the fractional area in categories 0 to n. |
|---|
| 339 | ! initial value (in h = 0) = open water area |
|---|
| 340 | zGsum(1:npti,-1) = 0._wp |
|---|
| 341 | zGsum(1:npti,0 ) = pato_i(1:npti) * z1_asum(1:npti) |
|---|
| 342 | DO jl = 1, jpl |
|---|
| 343 | zGsum(1:npti,jl) = ( pato_i(1:npti) + SUM( pa_i(1:npti,1:jl), dim=2 ) ) * z1_asum(1:npti) ! sum(1:jl) is ok (and not jpl) |
|---|
| 344 | END DO |
|---|
| 345 | ! |
|---|
| 346 | IF( ln_partf_lin ) THEN !--- Linear formulation (Thorndike et al., 1975) |
|---|
| 347 | DO jl = 0, jpl |
|---|
| 348 | DO ji = 1, npti |
|---|
| 349 | IF ( zGsum(ji,jl) < rn_gstar ) THEN |
|---|
| 350 | apartf(ji,jl) = z1_gstar * ( zGsum(ji,jl) - zGsum(ji,jl-1) ) * & |
|---|
| 351 | & ( 2._wp - ( zGsum(ji,jl-1) + zGsum(ji,jl) ) * z1_gstar ) |
|---|
| 352 | ELSEIF( zGsum(ji,jl-1) < rn_gstar ) THEN |
|---|
| 353 | apartf(ji,jl) = z1_gstar * ( rn_gstar - zGsum(ji,jl-1) ) * & |
|---|
| 354 | & ( 2._wp - ( zGsum(ji,jl-1) + rn_gstar ) * z1_gstar ) |
|---|
| 355 | ELSE |
|---|
| 356 | apartf(ji,jl) = 0._wp |
|---|
| 357 | ENDIF |
|---|
| 358 | END DO |
|---|
| 359 | END DO |
|---|
| 360 | ! |
|---|
| 361 | ELSEIF( ln_partf_exp ) THEN !--- Exponential, more stable formulation (Lipscomb et al, 2007) |
|---|
| 362 | ! |
|---|
| 363 | zfac = 1._wp / ( 1._wp - EXP(-z1_astar) ) |
|---|
| 364 | DO jl = -1, jpl |
|---|
| 365 | DO ji = 1, npti |
|---|
| 366 | zGsum(ji,jl) = EXP( -zGsum(ji,jl) * z1_astar ) * zfac |
|---|
| 367 | END DO |
|---|
| 368 | END DO |
|---|
| 369 | DO jl = 0, jpl |
|---|
| 370 | DO ji = 1, npti |
|---|
| 371 | apartf(ji,jl) = zGsum(ji,jl-1) - zGsum(ji,jl) |
|---|
| 372 | END DO |
|---|
| 373 | END DO |
|---|
| 374 | ! |
|---|
| 375 | ENDIF |
|---|
| 376 | |
|---|
| 377 | ! !--- Ridging and rafting participation concentrations |
|---|
| 378 | IF( ln_rafting .AND. ln_ridging ) THEN !- ridging & rafting |
|---|
| 379 | DO jl = 1, jpl |
|---|
| 380 | DO ji = 1, npti |
|---|
| 381 | aridge(ji,jl) = ( 1._wp + TANH ( rn_craft * ( zhi(ji,jl) - rn_hraft ) ) ) * 0.5_wp * apartf(ji,jl) |
|---|
| 382 | araft (ji,jl) = apartf(ji,jl) - aridge(ji,jl) |
|---|
| 383 | END DO |
|---|
| 384 | END DO |
|---|
| 385 | ELSEIF( ln_ridging .AND. .NOT. ln_rafting ) THEN !- ridging alone |
|---|
| 386 | DO jl = 1, jpl |
|---|
| 387 | DO ji = 1, npti |
|---|
| 388 | aridge(ji,jl) = apartf(ji,jl) |
|---|
| 389 | araft (ji,jl) = 0._wp |
|---|
| 390 | END DO |
|---|
| 391 | END DO |
|---|
| 392 | ELSEIF( ln_rafting .AND. .NOT. ln_ridging ) THEN !- rafting alone |
|---|
| 393 | DO jl = 1, jpl |
|---|
| 394 | DO ji = 1, npti |
|---|
| 395 | aridge(ji,jl) = 0._wp |
|---|
| 396 | araft (ji,jl) = apartf(ji,jl) |
|---|
| 397 | END DO |
|---|
| 398 | END DO |
|---|
| 399 | ELSE !- no ridging & no rafting |
|---|
| 400 | DO jl = 1, jpl |
|---|
| 401 | DO ji = 1, npti |
|---|
| 402 | aridge(ji,jl) = 0._wp |
|---|
| 403 | araft (ji,jl) = 0._wp |
|---|
| 404 | END DO |
|---|
| 405 | END DO |
|---|
| 406 | ENDIF |
|---|
| 407 | |
|---|
| 408 | ! 2) Transfer function |
|---|
| 409 | !----------------------------------------------------------------- |
|---|
| 410 | ! Compute max and min ridged ice thickness for each ridging category. |
|---|
| 411 | ! Assume ridged ice is uniformly distributed between hrmin and hrmax. |
|---|
| 412 | ! |
|---|
| 413 | ! This parameterization is a modified version of Hibler (1980). |
|---|
| 414 | ! The mean ridging thickness, zhmean, is proportional to hi^(0.5) |
|---|
| 415 | ! and for very thick ridging ice must be >= hrdg_hi_min*hi |
|---|
| 416 | ! |
|---|
| 417 | ! The minimum ridging thickness, hrmin, is equal to 2*hi |
|---|
| 418 | ! (i.e., rafting) and for very thick ridging ice is |
|---|
| 419 | ! constrained by hrmin <= (zhmean + hi)/2. |
|---|
| 420 | ! |
|---|
| 421 | ! The maximum ridging thickness, hrmax, is determined by zhmean and hrmin. |
|---|
| 422 | ! |
|---|
| 423 | ! These modifications have the effect of reducing the ice strength |
|---|
| 424 | ! (relative to the Hibler formulation) when very thick ice is ridging. |
|---|
| 425 | ! |
|---|
| 426 | ! zaksum = net area removed/ total area removed |
|---|
| 427 | ! where total area removed = area of ice that ridges |
|---|
| 428 | ! net area removed = total area removed - area of new ridges |
|---|
| 429 | !----------------------------------------------------------------- |
|---|
| 430 | zfac = 1._wp / hi_hrft |
|---|
| 431 | zaksum(1:npti) = apartf(1:npti,0) |
|---|
| 432 | ! |
|---|
| 433 | DO jl = 1, jpl |
|---|
| 434 | DO ji = 1, npti |
|---|
| 435 | IF ( apartf(ji,jl) > 0._wp ) THEN |
|---|
| 436 | zhmean = MAX( SQRT( rn_hstar * zhi(ji,jl) ), zhi(ji,jl) * hrdg_hi_min ) |
|---|
| 437 | hrmin (ji,jl) = MIN( 2._wp * zhi(ji,jl), 0.5_wp * ( zhmean + zhi(ji,jl) ) ) |
|---|
| 438 | hrmax (ji,jl) = 2._wp * zhmean - hrmin(ji,jl) |
|---|
| 439 | hraft (ji,jl) = zhi(ji,jl) * zfac |
|---|
| 440 | hi_hrdg(ji,jl) = zhi(ji,jl) / MAX( zhmean, epsi20 ) |
|---|
| 441 | ! |
|---|
| 442 | ! Normalization factor : zaksum, ensures mass conservation |
|---|
| 443 | zaksum(ji) = zaksum(ji) + aridge(ji,jl) * ( 1._wp - hi_hrdg(ji,jl) ) & |
|---|
| 444 | & + araft (ji,jl) * ( 1._wp - hi_hrft ) |
|---|
| 445 | ELSE |
|---|
| 446 | hrmin (ji,jl) = 0._wp |
|---|
| 447 | hrmax (ji,jl) = 0._wp |
|---|
| 448 | hraft (ji,jl) = 0._wp |
|---|
| 449 | hi_hrdg(ji,jl) = 1._wp |
|---|
| 450 | ENDIF |
|---|
| 451 | END DO |
|---|
| 452 | END DO |
|---|
| 453 | ! |
|---|
| 454 | ! 3) closing_gross |
|---|
| 455 | !----------------- |
|---|
| 456 | ! Based on the ITD of ridging and ridged ice, convert the net closing rate to a gross closing rate. |
|---|
| 457 | ! NOTE: 0 < aksum <= 1 |
|---|
| 458 | WHERE( zaksum(1:npti) > epsi10 ) ; closing_gross(1:npti) = pclosing_net(1:npti) / zaksum(1:npti) |
|---|
| 459 | ELSEWHERE ; closing_gross(1:npti) = 0._wp |
|---|
| 460 | END WHERE |
|---|
| 461 | |
|---|
| 462 | ! correction to closing rate if excessive ice removal |
|---|
| 463 | !---------------------------------------------------- |
|---|
| 464 | ! Reduce the closing rate if more than 100% of any ice category would be removed |
|---|
| 465 | ! Reduce the opening rate in proportion |
|---|
| 466 | DO jl = 1, jpl |
|---|
| 467 | DO ji = 1, npti |
|---|
| 468 | zfac = apartf(ji,jl) * closing_gross(ji) * rDt_ice |
|---|
| 469 | IF( zfac > pa_i(ji,jl) .AND. apartf(ji,jl) /= 0._wp ) THEN |
|---|
| 470 | closing_gross(ji) = pa_i(ji,jl) / apartf(ji,jl) * r1_Dt_ice |
|---|
| 471 | ENDIF |
|---|
| 472 | END DO |
|---|
| 473 | END DO |
|---|
| 474 | |
|---|
| 475 | ! 4) correction to opening if excessive open water removal |
|---|
| 476 | !--------------------------------------------------------- |
|---|
| 477 | ! Reduce the closing rate if more than 100% of the open water would be removed |
|---|
| 478 | ! Reduce the opening rate in proportion |
|---|
| 479 | DO ji = 1, npti |
|---|
| 480 | zfac = pato_i(ji) + ( opning(ji) - apartf(ji,0) * closing_gross(ji) ) * rDt_ice |
|---|
| 481 | IF( zfac < 0._wp ) THEN ! would lead to negative ato_i |
|---|
| 482 | opning(ji) = apartf(ji,0) * closing_gross(ji) - pato_i(ji) * r1_Dt_ice |
|---|
| 483 | ELSEIF( zfac > zasum(ji) ) THEN ! would lead to ato_i > asum |
|---|
| 484 | opning(ji) = apartf(ji,0) * closing_gross(ji) + ( zasum(ji) - pato_i(ji) ) * r1_Dt_ice |
|---|
| 485 | ENDIF |
|---|
| 486 | END DO |
|---|
| 487 | ! |
|---|
| 488 | END SUBROUTINE rdgrft_prep |
|---|
| 489 | |
|---|
| 490 | |
|---|
| 491 | SUBROUTINE rdgrft_shift |
|---|
| 492 | !!------------------------------------------------------------------- |
|---|
| 493 | !! *** ROUTINE rdgrft_shift *** |
|---|
| 494 | !! |
|---|
| 495 | !! ** Purpose : shift ridging ice among thickness categories of ice thickness |
|---|
| 496 | !! |
|---|
| 497 | !! ** Method : Remove area, volume, and energy from each ridging category |
|---|
| 498 | !! and add to thicker ice categories. |
|---|
| 499 | !!------------------------------------------------------------------- |
|---|
| 500 | ! |
|---|
| 501 | INTEGER :: ji, jj, jl, jl1, jl2, jk ! dummy loop indices |
|---|
| 502 | REAL(wp) :: hL, hR, farea ! left and right limits of integration and new area going to jl2 |
|---|
| 503 | REAL(wp) :: vsw ! vol of water trapped into ridges |
|---|
| 504 | REAL(wp) :: afrdg, afrft ! fraction of category area ridged/rafted |
|---|
| 505 | REAL(wp) :: airdg1, oirdg1, aprdg1, virdg1, sirdg1 |
|---|
| 506 | REAL(wp) :: airft1, oirft1, aprft1 |
|---|
| 507 | REAL(wp), DIMENSION(jpij) :: airdg2, oirdg2, aprdg2, virdg2, sirdg2, vsrdg, vprdg, vlrdg ! area etc of new ridges |
|---|
| 508 | REAL(wp), DIMENSION(jpij) :: airft2, oirft2, aprft2, virft , sirft , vsrft, vprft, vlrft ! area etc of rafted ice |
|---|
| 509 | ! |
|---|
| 510 | REAL(wp), DIMENSION(jpij) :: ersw ! enth of water trapped into ridges |
|---|
| 511 | REAL(wp), DIMENSION(jpij) :: zswitch, fvol ! new ridge volume going to jl2 |
|---|
| 512 | REAL(wp), DIMENSION(jpij) :: z1_ai ! 1 / a |
|---|
| 513 | REAL(wp), DIMENSION(jpij) :: zvti ! sum(v_i) |
|---|
| 514 | ! |
|---|
| 515 | REAL(wp), DIMENSION(jpij,nlay_s) :: esrft ! snow energy of rafting ice |
|---|
| 516 | REAL(wp), DIMENSION(jpij,nlay_i) :: eirft ! ice energy of rafting ice |
|---|
| 517 | REAL(wp), DIMENSION(jpij,nlay_s) :: esrdg ! enth*volume of new ridges |
|---|
| 518 | REAL(wp), DIMENSION(jpij,nlay_i) :: eirdg ! enth*volume of new ridges |
|---|
| 519 | ! |
|---|
| 520 | INTEGER , DIMENSION(jpij) :: itest_rdg, itest_rft ! test for conservation |
|---|
| 521 | !!------------------------------------------------------------------- |
|---|
| 522 | ! |
|---|
| 523 | zvti(1:npti) = SUM( v_i_2d(1:npti,:), dim=2 ) ! total ice volume |
|---|
| 524 | ! |
|---|
| 525 | ! 1) Change in open water area due to closing and opening |
|---|
| 526 | !-------------------------------------------------------- |
|---|
| 527 | DO ji = 1, npti |
|---|
| 528 | ato_i_1d(ji) = MAX( 0._wp, ato_i_1d(ji) + ( opning(ji) - apartf(ji,0) * closing_gross(ji) ) * rDt_ice ) |
|---|
| 529 | END DO |
|---|
| 530 | |
|---|
| 531 | ! 2) compute categories in which ice is removed (jl1) |
|---|
| 532 | !---------------------------------------------------- |
|---|
| 533 | DO jl1 = 1, jpl |
|---|
| 534 | |
|---|
| 535 | IF( nn_icesal /= 2 ) THEN |
|---|
| 536 | CALL tab_2d_1d( npti, nptidx(1:npti), s_i_1d(1:npti), s_i(:,:,jl1) ) |
|---|
| 537 | ENDIF |
|---|
| 538 | |
|---|
| 539 | DO ji = 1, npti |
|---|
| 540 | |
|---|
| 541 | IF( apartf(ji,jl1) > 0._wp .AND. closing_gross(ji) > 0._wp ) THEN ! only if ice is ridging |
|---|
| 542 | |
|---|
| 543 | IF( a_i_2d(ji,jl1) > epsi10 ) THEN ; z1_ai(ji) = 1._wp / a_i_2d(ji,jl1) |
|---|
| 544 | ELSE ; z1_ai(ji) = 0._wp |
|---|
| 545 | ENDIF |
|---|
| 546 | |
|---|
| 547 | ! area of ridging / rafting ice (airdg1) and of new ridge (airdg2) |
|---|
| 548 | airdg1 = aridge(ji,jl1) * closing_gross(ji) * rDt_ice |
|---|
| 549 | airft1 = araft (ji,jl1) * closing_gross(ji) * rDt_ice |
|---|
| 550 | |
|---|
| 551 | airdg2(ji) = airdg1 * hi_hrdg(ji,jl1) |
|---|
| 552 | airft2(ji) = airft1 * hi_hrft |
|---|
| 553 | |
|---|
| 554 | ! ridging /rafting fractions |
|---|
| 555 | afrdg = airdg1 * z1_ai(ji) |
|---|
| 556 | afrft = airft1 * z1_ai(ji) |
|---|
| 557 | |
|---|
| 558 | ! volume and enthalpy (J/m2, >0) of seawater trapped into ridges |
|---|
| 559 | IF ( zvti(ji) <= 10. ) THEN ; vsw = v_i_2d(ji,jl1) * afrdg * rn_porordg ! v <= 10m then porosity = rn_porordg |
|---|
| 560 | ELSEIF( zvti(ji) >= 20. ) THEN ; vsw = 0._wp ! v >= 20m then porosity = 0 |
|---|
| 561 | ELSE ; vsw = v_i_2d(ji,jl1) * afrdg * rn_porordg * MAX( 0._wp, 2._wp - 0.1_wp * zvti(ji) ) ! v > 10m and v < 20m then porosity = linear transition to 0 |
|---|
| 562 | ENDIF |
|---|
| 563 | ersw(ji) = -rhoi * vsw * rcp * sst_1d(ji) ! clem: if sst>0, then ersw <0 (is that possible?) |
|---|
| 564 | |
|---|
| 565 | ! volume etc of ridging / rafting ice and new ridges (vi, vs, sm, oi, es, ei) |
|---|
| 566 | virdg1 = v_i_2d (ji,jl1) * afrdg |
|---|
| 567 | virdg2(ji) = v_i_2d (ji,jl1) * afrdg + vsw |
|---|
| 568 | vsrdg(ji) = v_s_2d (ji,jl1) * afrdg |
|---|
| 569 | sirdg1 = sv_i_2d(ji,jl1) * afrdg |
|---|
| 570 | sirdg2(ji) = sv_i_2d(ji,jl1) * afrdg + vsw * sss_1d(ji) |
|---|
| 571 | oirdg1 = oa_i_2d(ji,jl1) * afrdg |
|---|
| 572 | oirdg2(ji) = oa_i_2d(ji,jl1) * afrdg * hi_hrdg(ji,jl1) |
|---|
| 573 | |
|---|
| 574 | virft(ji) = v_i_2d (ji,jl1) * afrft |
|---|
| 575 | vsrft(ji) = v_s_2d (ji,jl1) * afrft |
|---|
| 576 | sirft(ji) = sv_i_2d(ji,jl1) * afrft |
|---|
| 577 | oirft1 = oa_i_2d(ji,jl1) * afrft |
|---|
| 578 | oirft2(ji) = oa_i_2d(ji,jl1) * afrft * hi_hrft |
|---|
| 579 | |
|---|
| 580 | IF ( ln_pnd_LEV ) THEN |
|---|
| 581 | aprdg1 = a_ip_2d(ji,jl1) * afrdg |
|---|
| 582 | aprdg2(ji) = a_ip_2d(ji,jl1) * afrdg * hi_hrdg(ji,jl1) |
|---|
| 583 | vprdg (ji) = v_ip_2d(ji,jl1) * afrdg |
|---|
| 584 | aprft1 = a_ip_2d(ji,jl1) * afrft |
|---|
| 585 | aprft2(ji) = a_ip_2d(ji,jl1) * afrft * hi_hrft |
|---|
| 586 | vprft (ji) = v_ip_2d(ji,jl1) * afrft |
|---|
| 587 | IF ( ln_pnd_lids ) THEN |
|---|
| 588 | vlrdg (ji) = v_il_2d(ji,jl1) * afrdg |
|---|
| 589 | vlrft (ji) = v_il_2d(ji,jl1) * afrft |
|---|
| 590 | ENDIF |
|---|
| 591 | ENDIF |
|---|
| 592 | |
|---|
| 593 | ! Ice-ocean exchanges associated with ice porosity |
|---|
| 594 | wfx_dyn_1d(ji) = wfx_dyn_1d(ji) - vsw * rhoi * r1_Dt_ice ! increase in ice volume due to seawater frozen in voids |
|---|
| 595 | sfx_dyn_1d(ji) = sfx_dyn_1d(ji) - vsw * sss_1d(ji) * rhoi * r1_Dt_ice |
|---|
| 596 | hfx_dyn_1d(ji) = hfx_dyn_1d(ji) + ersw(ji) * r1_Dt_ice ! > 0 [W.m-2] |
|---|
| 597 | |
|---|
| 598 | ! Put the snow lost by ridging into the ocean |
|---|
| 599 | ! Note that esrdg > 0; the ocean must cool to melt snow. If the ocean temp = Tf already, new ice must grow. |
|---|
| 600 | wfx_snw_dyn_1d(ji) = wfx_snw_dyn_1d(ji) + ( rhos * vsrdg(ji) * ( 1._wp - rn_fsnwrdg ) & ! fresh water source for ocean |
|---|
| 601 | & + rhos * vsrft(ji) * ( 1._wp - rn_fsnwrft ) ) * r1_Dt_ice |
|---|
| 602 | |
|---|
| 603 | ! virtual salt flux to keep salinity constant |
|---|
| 604 | IF( nn_icesal /= 2 ) THEN |
|---|
| 605 | sirdg2(ji) = sirdg2(ji) - vsw * ( sss_1d(ji) - s_i_1d(ji) ) ! ridge salinity = s_i |
|---|
| 606 | sfx_bri_1d(ji) = sfx_bri_1d(ji) + sss_1d(ji) * vsw * rhoi * r1_Dt_ice & ! put back sss_m into the ocean |
|---|
| 607 | & - s_i_1d(ji) * vsw * rhoi * r1_Dt_ice ! and get s_i from the ocean |
|---|
| 608 | ENDIF |
|---|
| 609 | |
|---|
| 610 | ! Remove area, volume of new ridge to each category jl1 |
|---|
| 611 | !------------------------------------------------------ |
|---|
| 612 | a_i_2d (ji,jl1) = a_i_2d (ji,jl1) - airdg1 - airft1 |
|---|
| 613 | v_i_2d (ji,jl1) = v_i_2d (ji,jl1) - virdg1 - virft(ji) |
|---|
| 614 | v_s_2d (ji,jl1) = v_s_2d (ji,jl1) - vsrdg(ji) - vsrft(ji) |
|---|
| 615 | sv_i_2d(ji,jl1) = sv_i_2d(ji,jl1) - sirdg1 - sirft(ji) |
|---|
| 616 | oa_i_2d(ji,jl1) = oa_i_2d(ji,jl1) - oirdg1 - oirft1 |
|---|
| 617 | IF ( ln_pnd_LEV ) THEN |
|---|
| 618 | a_ip_2d(ji,jl1) = a_ip_2d(ji,jl1) - aprdg1 - aprft1 |
|---|
| 619 | v_ip_2d(ji,jl1) = v_ip_2d(ji,jl1) - vprdg(ji) - vprft(ji) |
|---|
| 620 | IF ( ln_pnd_lids ) THEN |
|---|
| 621 | v_il_2d(ji,jl1) = v_il_2d(ji,jl1) - vlrdg(ji) - vlrft(ji) |
|---|
| 622 | ENDIF |
|---|
| 623 | ENDIF |
|---|
| 624 | ENDIF |
|---|
| 625 | |
|---|
| 626 | END DO ! ji |
|---|
| 627 | |
|---|
| 628 | ! special loop for e_s because of layers jk |
|---|
| 629 | DO jk = 1, nlay_s |
|---|
| 630 | DO ji = 1, npti |
|---|
| 631 | IF( apartf(ji,jl1) > 0._wp .AND. closing_gross(ji) > 0._wp ) THEN |
|---|
| 632 | ! Compute ridging /rafting fractions |
|---|
| 633 | afrdg = aridge(ji,jl1) * closing_gross(ji) * rDt_ice * z1_ai(ji) |
|---|
| 634 | afrft = araft (ji,jl1) * closing_gross(ji) * rDt_ice * z1_ai(ji) |
|---|
| 635 | ! Compute ridging /rafting ice and new ridges for es |
|---|
| 636 | esrdg(ji,jk) = ze_s_2d (ji,jk,jl1) * afrdg |
|---|
| 637 | esrft(ji,jk) = ze_s_2d (ji,jk,jl1) * afrft |
|---|
| 638 | ! Put the snow lost by ridging into the ocean |
|---|
| 639 | hfx_dyn_1d(ji) = hfx_dyn_1d(ji) + ( - esrdg(ji,jk) * ( 1._wp - rn_fsnwrdg ) & ! heat sink for ocean (<0, W.m-2) |
|---|
| 640 | & - esrft(ji,jk) * ( 1._wp - rn_fsnwrft ) ) * r1_Dt_ice |
|---|
| 641 | ! |
|---|
| 642 | ! Remove energy of new ridge to each category jl1 |
|---|
| 643 | !------------------------------------------------- |
|---|
| 644 | ze_s_2d(ji,jk,jl1) = ze_s_2d(ji,jk,jl1) * ( 1._wp - afrdg - afrft ) |
|---|
| 645 | ENDIF |
|---|
| 646 | END DO |
|---|
| 647 | END DO |
|---|
| 648 | |
|---|
| 649 | ! special loop for e_i because of layers jk |
|---|
| 650 | DO jk = 1, nlay_i |
|---|
| 651 | DO ji = 1, npti |
|---|
| 652 | IF( apartf(ji,jl1) > 0._wp .AND. closing_gross(ji) > 0._wp ) THEN |
|---|
| 653 | ! Compute ridging /rafting fractions |
|---|
| 654 | afrdg = aridge(ji,jl1) * closing_gross(ji) * rDt_ice * z1_ai(ji) |
|---|
| 655 | afrft = araft (ji,jl1) * closing_gross(ji) * rDt_ice * z1_ai(ji) |
|---|
| 656 | ! Compute ridging ice and new ridges for ei |
|---|
| 657 | eirdg(ji,jk) = ze_i_2d (ji,jk,jl1) * afrdg + ersw(ji) * r1_nlay_i |
|---|
| 658 | eirft(ji,jk) = ze_i_2d (ji,jk,jl1) * afrft |
|---|
| 659 | ! |
|---|
| 660 | ! Remove energy of new ridge to each category jl1 |
|---|
| 661 | !------------------------------------------------- |
|---|
| 662 | ze_i_2d(ji,jk,jl1) = ze_i_2d(ji,jk,jl1) * ( 1._wp - afrdg - afrft ) |
|---|
| 663 | ENDIF |
|---|
| 664 | END DO |
|---|
| 665 | END DO |
|---|
| 666 | |
|---|
| 667 | ! 3) compute categories in which ice is added (jl2) |
|---|
| 668 | !-------------------------------------------------- |
|---|
| 669 | itest_rdg(1:npti) = 0 |
|---|
| 670 | itest_rft(1:npti) = 0 |
|---|
| 671 | DO jl2 = 1, jpl |
|---|
| 672 | ! |
|---|
| 673 | DO ji = 1, npti |
|---|
| 674 | |
|---|
| 675 | IF( apartf(ji,jl1) > 0._wp .AND. closing_gross(ji) > 0._wp ) THEN |
|---|
| 676 | |
|---|
| 677 | ! Compute the fraction of ridged ice area and volume going to thickness category jl2 |
|---|
| 678 | IF( hrmin(ji,jl1) <= hi_max(jl2) .AND. hrmax(ji,jl1) > hi_max(jl2-1) ) THEN |
|---|
| 679 | hL = MAX( hrmin(ji,jl1), hi_max(jl2-1) ) |
|---|
| 680 | hR = MIN( hrmax(ji,jl1), hi_max(jl2) ) |
|---|
| 681 | farea = ( hR - hL ) / ( hrmax(ji,jl1) - hrmin(ji,jl1) ) |
|---|
| 682 | fvol(ji) = ( hR * hR - hL * hL ) / ( hrmax(ji,jl1) * hrmax(ji,jl1) - hrmin(ji,jl1) * hrmin(ji,jl1) ) |
|---|
| 683 | ! |
|---|
| 684 | itest_rdg(ji) = 1 ! test for conservation |
|---|
| 685 | ELSE |
|---|
| 686 | farea = 0._wp |
|---|
| 687 | fvol(ji) = 0._wp |
|---|
| 688 | ENDIF |
|---|
| 689 | |
|---|
| 690 | ! Compute the fraction of rafted ice area and volume going to thickness category jl2 |
|---|
| 691 | IF( hraft(ji,jl1) <= hi_max(jl2) .AND. hraft(ji,jl1) > hi_max(jl2-1) ) THEN |
|---|
| 692 | zswitch(ji) = 1._wp |
|---|
| 693 | ! |
|---|
| 694 | itest_rft(ji) = 1 ! test for conservation |
|---|
| 695 | ELSE |
|---|
| 696 | zswitch(ji) = 0._wp |
|---|
| 697 | ENDIF |
|---|
| 698 | ! |
|---|
| 699 | ! Patch to ensure perfect conservation if ice thickness goes mad |
|---|
| 700 | ! Sometimes thickness is larger than hi_max(jpl) because of advection scheme (for very small areas) |
|---|
| 701 | ! Then ice volume is removed from one category but the ridging/rafting scheme |
|---|
| 702 | ! does not know where to move it, leading to a conservation issue. |
|---|
| 703 | IF( itest_rdg(ji) == 0 .AND. jl2 == jpl ) THEN ; farea = 1._wp ; fvol(ji) = 1._wp ; ENDIF |
|---|
| 704 | IF( itest_rft(ji) == 0 .AND. jl2 == jpl ) zswitch(ji) = 1._wp |
|---|
| 705 | ! |
|---|
| 706 | ! Add area, volume of new ridge to category jl2 |
|---|
| 707 | !---------------------------------------------- |
|---|
| 708 | a_i_2d (ji,jl2) = a_i_2d (ji,jl2) + ( airdg2(ji) * farea + airft2(ji) * zswitch(ji) ) |
|---|
| 709 | oa_i_2d(ji,jl2) = oa_i_2d(ji,jl2) + ( oirdg2(ji) * farea + oirft2(ji) * zswitch(ji) ) |
|---|
| 710 | v_i_2d (ji,jl2) = v_i_2d (ji,jl2) + ( virdg2(ji) * fvol(ji) + virft (ji) * zswitch(ji) ) |
|---|
| 711 | sv_i_2d(ji,jl2) = sv_i_2d(ji,jl2) + ( sirdg2(ji) * fvol(ji) + sirft (ji) * zswitch(ji) ) |
|---|
| 712 | v_s_2d (ji,jl2) = v_s_2d (ji,jl2) + ( vsrdg (ji) * rn_fsnwrdg * fvol(ji) + & |
|---|
| 713 | & vsrft (ji) * rn_fsnwrft * zswitch(ji) ) |
|---|
| 714 | IF ( ln_pnd_LEV ) THEN |
|---|
| 715 | v_ip_2d (ji,jl2) = v_ip_2d(ji,jl2) + ( vprdg (ji) * rn_fpndrdg * fvol (ji) & |
|---|
| 716 | & + vprft (ji) * rn_fpndrft * zswitch(ji) ) |
|---|
| 717 | a_ip_2d (ji,jl2) = a_ip_2d(ji,jl2) + ( aprdg2(ji) * rn_fpndrdg * farea & |
|---|
| 718 | & + aprft2(ji) * rn_fpndrft * zswitch(ji) ) |
|---|
| 719 | IF ( ln_pnd_lids ) THEN |
|---|
| 720 | v_il_2d (ji,jl2) = v_il_2d(ji,jl2) + ( vlrdg(ji) * rn_fpndrdg * fvol (ji) & |
|---|
| 721 | & + vlrft(ji) * rn_fpndrft * zswitch(ji) ) |
|---|
| 722 | ENDIF |
|---|
| 723 | ENDIF |
|---|
| 724 | |
|---|
| 725 | ENDIF |
|---|
| 726 | |
|---|
| 727 | END DO |
|---|
| 728 | ! Add snow energy of new ridge to category jl2 |
|---|
| 729 | !--------------------------------------------- |
|---|
| 730 | DO jk = 1, nlay_s |
|---|
| 731 | DO ji = 1, npti |
|---|
| 732 | IF( apartf(ji,jl1) > 0._wp .AND. closing_gross(ji) > 0._wp ) & |
|---|
| 733 | & ze_s_2d(ji,jk,jl2) = ze_s_2d(ji,jk,jl2) + ( esrdg(ji,jk) * rn_fsnwrdg * fvol(ji) + & |
|---|
| 734 | & esrft(ji,jk) * rn_fsnwrft * zswitch(ji) ) |
|---|
| 735 | END DO |
|---|
| 736 | END DO |
|---|
| 737 | ! Add ice energy of new ridge to category jl2 |
|---|
| 738 | !-------------------------------------------- |
|---|
| 739 | DO jk = 1, nlay_i |
|---|
| 740 | DO ji = 1, npti |
|---|
| 741 | IF( apartf(ji,jl1) > 0._wp .AND. closing_gross(ji) > 0._wp ) & |
|---|
| 742 | & ze_i_2d(ji,jk,jl2) = ze_i_2d(ji,jk,jl2) + eirdg(ji,jk) * fvol(ji) + eirft(ji,jk) * zswitch(ji) |
|---|
| 743 | END DO |
|---|
| 744 | END DO |
|---|
| 745 | ! |
|---|
| 746 | END DO ! jl2 |
|---|
| 747 | ! |
|---|
| 748 | END DO ! jl1 |
|---|
| 749 | ! |
|---|
| 750 | ! roundoff errors |
|---|
| 751 | !---------------- |
|---|
| 752 | ! In case ridging/rafting lead to very small negative values (sometimes it happens) |
|---|
| 753 | CALL ice_var_roundoff( a_i_2d, v_i_2d, v_s_2d, sv_i_2d, oa_i_2d, a_ip_2d, v_ip_2d, v_il_2d, ze_s_2d, ze_i_2d ) |
|---|
| 754 | ! |
|---|
| 755 | END SUBROUTINE rdgrft_shift |
|---|
| 756 | |
|---|
| 757 | |
|---|
| 758 | SUBROUTINE ice_strength |
|---|
| 759 | !!---------------------------------------------------------------------- |
|---|
| 760 | !! *** ROUTINE ice_strength *** |
|---|
| 761 | !! |
|---|
| 762 | !! ** Purpose : computes ice strength used in dynamics routines of ice thickness |
|---|
| 763 | !! |
|---|
| 764 | !! ** Method : Compute the strength of the ice pack, defined as the energy (J m-2) |
|---|
| 765 | !! dissipated per unit area removed from the ice pack under compression, |
|---|
| 766 | !! and assumed proportional to the change in potential energy caused |
|---|
| 767 | !! by ridging. Note that only Hibler's formulation is stable and that |
|---|
| 768 | !! ice strength has to be smoothed |
|---|
| 769 | !!---------------------------------------------------------------------- |
|---|
| 770 | INTEGER :: ji, jj, jl ! dummy loop indices |
|---|
| 771 | INTEGER :: ismooth ! smoothing the resistance to deformation |
|---|
| 772 | INTEGER :: itframe ! number of time steps for the P smoothing |
|---|
| 773 | REAL(wp) :: zp, z1_3 ! local scalars |
|---|
| 774 | REAL(wp), DIMENSION(jpi,jpj) :: zworka ! temporary array used here |
|---|
| 775 | REAL(wp), DIMENSION(jpi,jpj) :: zstrp1, zstrp2 ! strength at previous time steps |
|---|
| 776 | !!---------------------------------------------------------------------- |
|---|
| 777 | ! !--------------------------------------------------! |
|---|
| 778 | IF( ln_str_H79 ) THEN ! Ice strength => Hibler (1979) method ! |
|---|
| 779 | ! !--------------------------------------------------! |
|---|
| 780 | strength(:,:) = rn_pstar * SUM( v_i(:,:,:), dim=3 ) * EXP( -rn_crhg * ( 1._wp - SUM( a_i(:,:,:), dim=3 ) ) ) |
|---|
| 781 | ismooth = 1 ! original code |
|---|
| 782 | ! ismooth = 0 ! try for EAP stability |
|---|
| 783 | ! !--------------------------------------------------! |
|---|
| 784 | ELSE ! Zero strength ! |
|---|
| 785 | ! !--------------------------------------------------! |
|---|
| 786 | strength(:,:) = 0._wp |
|---|
| 787 | ismooth = 0 |
|---|
| 788 | ENDIF |
|---|
| 789 | ! !--------------------------------------------------! |
|---|
| 790 | SELECT CASE( ismooth ) ! Smoothing ice strength ! |
|---|
| 791 | ! !--------------------------------------------------! |
|---|
| 792 | CASE( 1 ) !--- Spatial smoothing |
|---|
| 793 | DO_2D( 0, 0, 0, 0 ) |
|---|
| 794 | IF ( SUM( a_i(ji,jj,:) ) > 0._wp ) THEN |
|---|
| 795 | zworka(ji,jj) = ( 4.0 * strength(ji,jj) & |
|---|
| 796 | & + strength(ji-1,jj) * tmask(ji-1,jj,1) + strength(ji+1,jj) * tmask(ji+1,jj,1) & |
|---|
| 797 | & + strength(ji,jj-1) * tmask(ji,jj-1,1) + strength(ji,jj+1) * tmask(ji,jj+1,1) & |
|---|
| 798 | & ) / ( 4.0 + tmask(ji-1,jj,1) + tmask(ji+1,jj,1) + tmask(ji,jj-1,1) + tmask(ji,jj+1,1) ) |
|---|
| 799 | ELSE |
|---|
| 800 | zworka(ji,jj) = 0._wp |
|---|
| 801 | ENDIF |
|---|
| 802 | END_2D |
|---|
| 803 | |
|---|
| 804 | DO_2D( 0, 0, 0, 0 ) |
|---|
| 805 | strength(ji,jj) = zworka(ji,jj) |
|---|
| 806 | END_2D |
|---|
| 807 | CALL lbc_lnk( 'icedyn_rdgrft', strength, 'T', 1.0_wp ) |
|---|
| 808 | ! |
|---|
| 809 | CASE( 2 ) !--- Temporal smoothing |
|---|
| 810 | IF ( kt_ice == nit000 ) THEN |
|---|
| 811 | zstrp1(:,:) = 0._wp |
|---|
| 812 | zstrp2(:,:) = 0._wp |
|---|
| 813 | ENDIF |
|---|
| 814 | ! |
|---|
| 815 | DO_2D( 0, 0, 0, 0 ) |
|---|
| 816 | IF ( SUM( a_i(ji,jj,:) ) > 0._wp ) THEN |
|---|
| 817 | itframe = 1 ! number of time steps for the running mean |
|---|
| 818 | IF ( zstrp1(ji,jj) > 0._wp ) itframe = itframe + 1 |
|---|
| 819 | IF ( zstrp2(ji,jj) > 0._wp ) itframe = itframe + 1 |
|---|
| 820 | zp = ( strength(ji,jj) + zstrp1(ji,jj) + zstrp2(ji,jj) ) / itframe |
|---|
| 821 | zstrp2 (ji,jj) = zstrp1 (ji,jj) |
|---|
| 822 | zstrp1 (ji,jj) = strength(ji,jj) |
|---|
| 823 | strength(ji,jj) = zp |
|---|
| 824 | ENDIF |
|---|
| 825 | END_2D |
|---|
| 826 | CALL lbc_lnk( 'icedyn_rdgrft', strength, 'T', 1.0_wp ) |
|---|
| 827 | ! |
|---|
| 828 | END SELECT |
|---|
| 829 | ! |
|---|
| 830 | END SUBROUTINE ice_strength |
|---|
| 831 | |
|---|
| 832 | |
|---|
| 833 | SUBROUTINE ice_dyn_1d2d( kn ) |
|---|
| 834 | !!----------------------------------------------------------------------- |
|---|
| 835 | !! *** ROUTINE ice_dyn_1d2d *** |
|---|
| 836 | !! |
|---|
| 837 | !! ** Purpose : move arrays from 1d to 2d and the reverse |
|---|
| 838 | !!----------------------------------------------------------------------- |
|---|
| 839 | INTEGER, INTENT(in) :: kn ! 1= from 2D to 1D ; 2= from 1D to 2D |
|---|
| 840 | ! |
|---|
| 841 | INTEGER :: jl, jk ! dummy loop indices |
|---|
| 842 | !!----------------------------------------------------------------------- |
|---|
| 843 | ! |
|---|
| 844 | SELECT CASE( kn ) |
|---|
| 845 | ! !---------------------! |
|---|
| 846 | CASE( 1 ) !== from 2D to 1D ==! |
|---|
| 847 | ! !---------------------! |
|---|
| 848 | ! fields used but not modified |
|---|
| 849 | CALL tab_2d_1d( npti, nptidx(1:npti), sss_1d(1:npti), sss_m(:,:) ) |
|---|
| 850 | CALL tab_2d_1d( npti, nptidx(1:npti), sst_1d(1:npti), sst_m(:,:) ) |
|---|
| 851 | ! the following fields are modified in this routine |
|---|
| 852 | !!CALL tab_2d_1d( npti, nptidx(1:npti), ato_i_1d(1:npti), ato_i(:,:) ) |
|---|
| 853 | !!CALL tab_3d_2d( npti, nptidx(1:npti), a_i_2d(1:npti,1:jpl), a_i(:,:,:) ) |
|---|
| 854 | !!CALL tab_3d_2d( npti, nptidx(1:npti), v_i_2d (1:npti,1:jpl), v_i (:,:,:) ) |
|---|
| 855 | CALL tab_3d_2d( npti, nptidx(1:npti), v_s_2d (1:npti,1:jpl), v_s (:,:,:) ) |
|---|
| 856 | CALL tab_3d_2d( npti, nptidx(1:npti), sv_i_2d(1:npti,1:jpl), sv_i(:,:,:) ) |
|---|
| 857 | CALL tab_3d_2d( npti, nptidx(1:npti), oa_i_2d(1:npti,1:jpl), oa_i(:,:,:) ) |
|---|
| 858 | CALL tab_3d_2d( npti, nptidx(1:npti), a_ip_2d(1:npti,1:jpl), a_ip(:,:,:) ) |
|---|
| 859 | CALL tab_3d_2d( npti, nptidx(1:npti), v_ip_2d(1:npti,1:jpl), v_ip(:,:,:) ) |
|---|
| 860 | CALL tab_3d_2d( npti, nptidx(1:npti), v_il_2d(1:npti,1:jpl), v_il(:,:,:) ) |
|---|
| 861 | DO jl = 1, jpl |
|---|
| 862 | DO jk = 1, nlay_s |
|---|
| 863 | CALL tab_2d_1d( npti, nptidx(1:npti), ze_s_2d(1:npti,jk,jl), e_s(:,:,jk,jl) ) |
|---|
| 864 | END DO |
|---|
| 865 | DO jk = 1, nlay_i |
|---|
| 866 | CALL tab_2d_1d( npti, nptidx(1:npti), ze_i_2d(1:npti,jk,jl), e_i(:,:,jk,jl) ) |
|---|
| 867 | END DO |
|---|
| 868 | END DO |
|---|
| 869 | CALL tab_2d_1d( npti, nptidx(1:npti), sfx_dyn_1d (1:npti), sfx_dyn (:,:) ) |
|---|
| 870 | CALL tab_2d_1d( npti, nptidx(1:npti), sfx_bri_1d (1:npti), sfx_bri (:,:) ) |
|---|
| 871 | CALL tab_2d_1d( npti, nptidx(1:npti), wfx_dyn_1d (1:npti), wfx_dyn (:,:) ) |
|---|
| 872 | CALL tab_2d_1d( npti, nptidx(1:npti), hfx_dyn_1d (1:npti), hfx_dyn (:,:) ) |
|---|
| 873 | CALL tab_2d_1d( npti, nptidx(1:npti), wfx_snw_dyn_1d(1:npti), wfx_snw_dyn(:,:) ) |
|---|
| 874 | CALL tab_2d_1d( npti, nptidx(1:npti), wfx_pnd_1d (1:npti), wfx_pnd (:,:) ) |
|---|
| 875 | ! |
|---|
| 876 | ! !---------------------! |
|---|
| 877 | CASE( 2 ) !== from 1D to 2D ==! |
|---|
| 878 | ! !---------------------! |
|---|
| 879 | CALL tab_1d_2d( npti, nptidx(1:npti), ato_i_1d(1:npti), ato_i(:,:) ) |
|---|
| 880 | CALL tab_2d_3d( npti, nptidx(1:npti), a_i_2d (1:npti,1:jpl), a_i (:,:,:) ) |
|---|
| 881 | CALL tab_2d_3d( npti, nptidx(1:npti), v_i_2d (1:npti,1:jpl), v_i (:,:,:) ) |
|---|
| 882 | CALL tab_2d_3d( npti, nptidx(1:npti), v_s_2d (1:npti,1:jpl), v_s (:,:,:) ) |
|---|
| 883 | CALL tab_2d_3d( npti, nptidx(1:npti), sv_i_2d(1:npti,1:jpl), sv_i(:,:,:) ) |
|---|
| 884 | CALL tab_2d_3d( npti, nptidx(1:npti), oa_i_2d(1:npti,1:jpl), oa_i(:,:,:) ) |
|---|
| 885 | CALL tab_2d_3d( npti, nptidx(1:npti), a_ip_2d(1:npti,1:jpl), a_ip(:,:,:) ) |
|---|
| 886 | CALL tab_2d_3d( npti, nptidx(1:npti), v_ip_2d(1:npti,1:jpl), v_ip(:,:,:) ) |
|---|
| 887 | CALL tab_2d_3d( npti, nptidx(1:npti), v_il_2d(1:npti,1:jpl), v_il(:,:,:) ) |
|---|
| 888 | DO jl = 1, jpl |
|---|
| 889 | DO jk = 1, nlay_s |
|---|
| 890 | CALL tab_1d_2d( npti, nptidx(1:npti), ze_s_2d(1:npti,jk,jl), e_s(:,:,jk,jl) ) |
|---|
| 891 | END DO |
|---|
| 892 | DO jk = 1, nlay_i |
|---|
| 893 | CALL tab_1d_2d( npti, nptidx(1:npti), ze_i_2d(1:npti,jk,jl), e_i(:,:,jk,jl) ) |
|---|
| 894 | END DO |
|---|
| 895 | END DO |
|---|
| 896 | CALL tab_1d_2d( npti, nptidx(1:npti), sfx_dyn_1d (1:npti), sfx_dyn (:,:) ) |
|---|
| 897 | CALL tab_1d_2d( npti, nptidx(1:npti), sfx_bri_1d (1:npti), sfx_bri (:,:) ) |
|---|
| 898 | CALL tab_1d_2d( npti, nptidx(1:npti), wfx_dyn_1d (1:npti), wfx_dyn (:,:) ) |
|---|
| 899 | CALL tab_1d_2d( npti, nptidx(1:npti), hfx_dyn_1d (1:npti), hfx_dyn (:,:) ) |
|---|
| 900 | CALL tab_1d_2d( npti, nptidx(1:npti), wfx_snw_dyn_1d(1:npti), wfx_snw_dyn(:,:) ) |
|---|
| 901 | CALL tab_1d_2d( npti, nptidx(1:npti), wfx_pnd_1d (1:npti), wfx_pnd (:,:) ) |
|---|
| 902 | ! |
|---|
| 903 | END SELECT |
|---|
| 904 | ! |
|---|
| 905 | END SUBROUTINE ice_dyn_1d2d |
|---|
| 906 | |
|---|
| 907 | |
|---|
| 908 | SUBROUTINE ice_dyn_rdgrft_init |
|---|
| 909 | !!------------------------------------------------------------------- |
|---|
| 910 | !! *** ROUTINE ice_dyn_rdgrft_init *** |
|---|
| 911 | !! |
|---|
| 912 | !! ** Purpose : Physical constants and parameters linked |
|---|
| 913 | !! to the mechanical ice redistribution |
|---|
| 914 | !! |
|---|
| 915 | !! ** Method : Read the namdyn_rdgrft namelist |
|---|
| 916 | !! and check the parameters values |
|---|
| 917 | !! called at the first timestep (nit000) |
|---|
| 918 | !! |
|---|
| 919 | !! ** input : Namelist namdyn_rdgrft |
|---|
| 920 | !!------------------------------------------------------------------- |
|---|
| 921 | INTEGER :: ios ! Local integer output status for namelist read |
|---|
| 922 | !! |
|---|
| 923 | NAMELIST/namdyn_rdgrft/ ln_str_H79, rn_pstar, rn_crhg, & |
|---|
| 924 | & rn_csrdg , & |
|---|
| 925 | & ln_partf_lin, rn_gstar, & |
|---|
| 926 | & ln_partf_exp, rn_astar, & |
|---|
| 927 | & ln_ridging, rn_hstar, rn_porordg, rn_fsnwrdg, rn_fpndrdg, & |
|---|
| 928 | & ln_rafting, rn_hraft, rn_craft , rn_fsnwrft, rn_fpndrft |
|---|
| 929 | !!------------------------------------------------------------------- |
|---|
| 930 | ! |
|---|
| 931 | READ ( numnam_ice_ref, namdyn_rdgrft, IOSTAT = ios, ERR = 901) |
|---|
| 932 | 901 IF( ios /= 0 ) CALL ctl_nam ( ios , 'namdyn_rdgrft in reference namelist' ) |
|---|
| 933 | READ ( numnam_ice_cfg, namdyn_rdgrft, IOSTAT = ios, ERR = 902 ) |
|---|
| 934 | 902 IF( ios > 0 ) CALL ctl_nam ( ios , 'namdyn_rdgrft in configuration namelist' ) |
|---|
| 935 | IF(lwm) WRITE ( numoni, namdyn_rdgrft ) |
|---|
| 936 | ! |
|---|
| 937 | IF (lwp) THEN ! control print |
|---|
| 938 | WRITE(numout,*) |
|---|
| 939 | WRITE(numout,*) 'ice_dyn_rdgrft_init: ice parameters for ridging/rafting ' |
|---|
| 940 | WRITE(numout,*) '~~~~~~~~~~~~~~~~~~' |
|---|
| 941 | WRITE(numout,*) ' Namelist namdyn_rdgrft:' |
|---|
| 942 | WRITE(numout,*) ' ice strength parameterization Hibler (1979) ln_str_H79 = ', ln_str_H79 |
|---|
| 943 | WRITE(numout,*) ' 1st bulk-rheology parameter rn_pstar = ', rn_pstar |
|---|
| 944 | WRITE(numout,*) ' 2nd bulk-rhelogy parameter rn_crhg = ', rn_crhg |
|---|
| 945 | WRITE(numout,*) ' Fraction of shear energy contributing to ridging rn_csrdg = ', rn_csrdg |
|---|
| 946 | WRITE(numout,*) ' linear ridging participation function ln_partf_lin = ', ln_partf_lin |
|---|
| 947 | WRITE(numout,*) ' Fraction of ice coverage contributing to ridging rn_gstar = ', rn_gstar |
|---|
| 948 | WRITE(numout,*) ' Exponential ridging participation function ln_partf_exp = ', ln_partf_exp |
|---|
| 949 | WRITE(numout,*) ' Equivalent to G* for an exponential function rn_astar = ', rn_astar |
|---|
| 950 | WRITE(numout,*) ' Ridging of ice sheets or not ln_ridging = ', ln_ridging |
|---|
| 951 | WRITE(numout,*) ' max ridged ice thickness rn_hstar = ', rn_hstar |
|---|
| 952 | WRITE(numout,*) ' Initial porosity of ridges rn_porordg = ', rn_porordg |
|---|
| 953 | WRITE(numout,*) ' Fraction of snow volume conserved during ridging rn_fsnwrdg = ', rn_fsnwrdg |
|---|
| 954 | WRITE(numout,*) ' Fraction of pond volume conserved during ridging rn_fpndrdg = ', rn_fpndrdg |
|---|
| 955 | WRITE(numout,*) ' Rafting of ice sheets or not ln_rafting = ', ln_rafting |
|---|
| 956 | WRITE(numout,*) ' Parmeter thickness (threshold between ridge-raft) rn_hraft = ', rn_hraft |
|---|
| 957 | WRITE(numout,*) ' Rafting hyperbolic tangent coefficient rn_craft = ', rn_craft |
|---|
| 958 | WRITE(numout,*) ' Fraction of snow volume conserved during rafting rn_fsnwrft = ', rn_fsnwrft |
|---|
| 959 | WRITE(numout,*) ' Fraction of pond volume conserved during rafting rn_fpndrft = ', rn_fpndrft |
|---|
| 960 | ENDIF |
|---|
| 961 | ! |
|---|
| 962 | IF ( ( ln_partf_lin .AND. ln_partf_exp ) .OR. ( .NOT.ln_partf_lin .AND. .NOT.ln_partf_exp ) ) THEN |
|---|
| 963 | CALL ctl_stop( 'ice_dyn_rdgrft_init: choose one and only one participation function (ln_partf_lin or ln_partf_exp)' ) |
|---|
| 964 | ENDIF |
|---|
| 965 | ! |
|---|
| 966 | IF( .NOT. ln_icethd ) THEN |
|---|
| 967 | rn_porordg = 0._wp |
|---|
| 968 | rn_fsnwrdg = 1._wp ; rn_fsnwrft = 1._wp |
|---|
| 969 | rn_fpndrdg = 1._wp ; rn_fpndrft = 1._wp |
|---|
| 970 | IF( lwp ) THEN |
|---|
| 971 | WRITE(numout,*) ' ==> only ice dynamics is activated, thus some parameters must be changed' |
|---|
| 972 | WRITE(numout,*) ' rn_porordg = ', rn_porordg |
|---|
| 973 | WRITE(numout,*) ' rn_fsnwrdg = ', rn_fsnwrdg |
|---|
| 974 | WRITE(numout,*) ' rn_fpndrdg = ', rn_fpndrdg |
|---|
| 975 | WRITE(numout,*) ' rn_fsnwrft = ', rn_fsnwrft |
|---|
| 976 | WRITE(numout,*) ' rn_fpndrft = ', rn_fpndrft |
|---|
| 977 | ENDIF |
|---|
| 978 | ENDIF |
|---|
| 979 | ! ! allocate arrays |
|---|
| 980 | IF( ice_dyn_rdgrft_alloc() /= 0 ) CALL ctl_stop( 'STOP', 'ice_dyn_rdgrft_init: unable to allocate arrays' ) |
|---|
| 981 | ! |
|---|
| 982 | END SUBROUTINE ice_dyn_rdgrft_init |
|---|
| 983 | |
|---|
| 984 | #else |
|---|
| 985 | !!---------------------------------------------------------------------- |
|---|
| 986 | !! Default option Empty module NO SI3 sea-ice model |
|---|
| 987 | !!---------------------------------------------------------------------- |
|---|
| 988 | #endif |
|---|
| 989 | |
|---|
| 990 | !!====================================================================== |
|---|
| 991 | END MODULE icedyn_rdgrft |
|---|
