| 1 | MODULE limrhg |
|---|
| 2 | !!====================================================================== |
|---|
| 3 | !! *** MODULE limrhg *** |
|---|
| 4 | !! Ice rheology : sea ice rheology |
|---|
| 5 | !!====================================================================== |
|---|
| 6 | !! History : - ! 2007-03 (M.A. Morales Maqueda, S. Bouillon) Original code |
|---|
| 7 | !! 3.0 ! 2008-03 (M. Vancoppenolle) LIM3 |
|---|
| 8 | !! - ! 2008-11 (M. Vancoppenolle, S. Bouillon, Y. Aksenov) add surface tilt in ice rheolohy |
|---|
| 9 | !! 3.3 ! 2009-05 (G.Garric) addition of the lim2_evp cas |
|---|
| 10 | !! 3.4 ! 2011-01 (A. Porter) dynamical allocation |
|---|
| 11 | !! 3.5 ! 2012-08 (R. Benshila) AGRIF |
|---|
| 12 | !! 3.6 ! 2016-06 (C. Rousset) Rewriting (conserves energy) |
|---|
| 13 | !!---------------------------------------------------------------------- |
|---|
| 14 | #if defined key_lim3 || ( defined key_lim2 && ! defined key_lim2_vp ) |
|---|
| 15 | !!---------------------------------------------------------------------- |
|---|
| 16 | !! 'key_lim3' OR LIM-3 sea-ice model |
|---|
| 17 | !! 'key_lim2' AND NOT 'key_lim2_vp' EVP LIM-2 sea-ice model |
|---|
| 18 | !!---------------------------------------------------------------------- |
|---|
| 19 | !! lim_rhg : computes ice velocities |
|---|
| 20 | !!---------------------------------------------------------------------- |
|---|
| 21 | USE phycst ! Physical constant |
|---|
| 22 | USE oce , ONLY : snwice_mass, snwice_mass_b |
|---|
| 23 | USE par_oce ! Ocean parameters |
|---|
| 24 | USE dom_oce ! Ocean domain |
|---|
| 25 | USE sbc_oce ! Surface boundary condition: ocean fields |
|---|
| 26 | USE sbc_ice ! Surface boundary condition: ice fields |
|---|
| 27 | #if defined key_lim3 |
|---|
| 28 | USE ice ! LIM-3: ice variables |
|---|
| 29 | USE dom_ice ! LIM-3: ice domain |
|---|
| 30 | USE limitd_me ! LIM-3: |
|---|
| 31 | #else |
|---|
| 32 | USE ice_2 ! LIM-2: ice variables |
|---|
| 33 | USE dom_ice_2 ! LIM-2: ice domain |
|---|
| 34 | #endif |
|---|
| 35 | USE lbclnk ! Lateral Boundary Condition / MPP link |
|---|
| 36 | USE lib_mpp ! MPP library |
|---|
| 37 | USE wrk_nemo ! work arrays |
|---|
| 38 | USE in_out_manager ! I/O manager |
|---|
| 39 | USE prtctl ! Print control |
|---|
| 40 | USE lib_fortran ! Fortran utilities (allows no signed zero when 'key_nosignedzero' defined) |
|---|
| 41 | #if defined key_agrif && defined key_lim2 |
|---|
| 42 | USE agrif_lim2_interp |
|---|
| 43 | #endif |
|---|
| 44 | #if defined key_bdy |
|---|
| 45 | USE bdyice_lim |
|---|
| 46 | #endif |
|---|
| 47 | |
|---|
| 48 | IMPLICIT NONE |
|---|
| 49 | PRIVATE |
|---|
| 50 | |
|---|
| 51 | PUBLIC lim_rhg ! routine called by lim_dyn (or lim_dyn_2) |
|---|
| 52 | |
|---|
| 53 | !! * Substitutions |
|---|
| 54 | # include "vectopt_loop_substitute.h90" |
|---|
| 55 | !!---------------------------------------------------------------------- |
|---|
| 56 | !! NEMO/LIM3 4.0 , UCL - NEMO Consortium (2011) |
|---|
| 57 | !! $Id$ |
|---|
| 58 | !! Software governed by the CeCILL licence (NEMOGCM/NEMO_CeCILL.txt) |
|---|
| 59 | !!---------------------------------------------------------------------- |
|---|
| 60 | CONTAINS |
|---|
| 61 | |
|---|
| 62 | SUBROUTINE lim_rhg( k_j1, k_jpj ) |
|---|
| 63 | !!------------------------------------------------------------------- |
|---|
| 64 | !! *** SUBROUTINE lim_rhg *** |
|---|
| 65 | !! EVP-C-grid |
|---|
| 66 | !! |
|---|
| 67 | !! ** purpose : determines sea ice drift from wind stress, ice-ocean |
|---|
| 68 | !! stress and sea-surface slope. Ice-ice interaction is described by |
|---|
| 69 | !! a non-linear elasto-viscous-plastic (EVP) law including shear |
|---|
| 70 | !! strength and a bulk rheology (Hunke and Dukowicz, 2002). |
|---|
| 71 | !! |
|---|
| 72 | !! The points in the C-grid look like this, dear reader |
|---|
| 73 | !! |
|---|
| 74 | !! (ji,jj) |
|---|
| 75 | !! | |
|---|
| 76 | !! | |
|---|
| 77 | !! (ji-1,jj) | (ji,jj) |
|---|
| 78 | !! --------- |
|---|
| 79 | !! | | |
|---|
| 80 | !! | (ji,jj) |------(ji,jj) |
|---|
| 81 | !! | | |
|---|
| 82 | !! --------- |
|---|
| 83 | !! (ji-1,jj-1) (ji,jj-1) |
|---|
| 84 | !! |
|---|
| 85 | !! ** Inputs : - wind forcing (stress), oceanic currents |
|---|
| 86 | !! ice total volume (vt_i) per unit area |
|---|
| 87 | !! snow total volume (vt_s) per unit area |
|---|
| 88 | !! |
|---|
| 89 | !! ** Action : - compute u_ice, v_ice : the components of the |
|---|
| 90 | !! sea-ice velocity vector |
|---|
| 91 | !! - compute delta_i, shear_i, divu_i, which are inputs |
|---|
| 92 | !! of the ice thickness distribution |
|---|
| 93 | !! |
|---|
| 94 | !! ** Steps : 1) Compute ice snow mass, ice strength |
|---|
| 95 | !! 2) Compute wind, oceanic stresses, mass terms and |
|---|
| 96 | !! coriolis terms of the momentum equation |
|---|
| 97 | !! 3) Solve the momentum equation (iterative procedure) |
|---|
| 98 | !! 4) Recompute invariants of the strain rate tensor |
|---|
| 99 | !! which are inputs of the ITD, store stress |
|---|
| 100 | !! for the next time step |
|---|
| 101 | !! 5) Control prints of residual (convergence) |
|---|
| 102 | !! and charge ellipse. |
|---|
| 103 | !! The user should make sure that the parameters |
|---|
| 104 | !! nn_nevp, elastic time scale and rn_creepl maintain stress state |
|---|
| 105 | !! on the charge ellipse for plastic flow |
|---|
| 106 | !! e.g. in the Canadian Archipelago |
|---|
| 107 | !! |
|---|
| 108 | !! ** Notes : Boundary condition for ice is chosen no-slip |
|---|
| 109 | !! but can be adjusted with param rn_shlat |
|---|
| 110 | !! |
|---|
| 111 | !! References : Hunke and Dukowicz, JPO97 |
|---|
| 112 | !! Bouillon et al., Ocean Modelling 2009 |
|---|
| 113 | !!------------------------------------------------------------------- |
|---|
| 114 | INTEGER, INTENT(in) :: k_j1 ! southern j-index for ice computation |
|---|
| 115 | INTEGER, INTENT(in) :: k_jpj ! northern j-index for ice computation |
|---|
| 116 | !! |
|---|
| 117 | INTEGER :: ji, jj ! dummy loop indices |
|---|
| 118 | INTEGER :: jter ! local integers |
|---|
| 119 | CHARACTER (len=50) :: charout |
|---|
| 120 | |
|---|
| 121 | REAL(wp) :: zdtevp, z1_dtevp ! time step for subcycling |
|---|
| 122 | REAL(wp) :: ecc2, z1_ecc2 ! square of yield ellipse eccenticity |
|---|
| 123 | REAL(wp) :: zbeta, zalph1, z1_alph1, zalph2, z1_alph2 ! alpha and beta from Bouillon 2009 and 2013 |
|---|
| 124 | REAL(wp) :: zm1, zm2, zm3, zmassU, zmassV ! ice/snow mass |
|---|
| 125 | REAL(wp) :: zdelta, zp_delf, zds2, zdt, zdt2, zdiv, zdiv2 ! temporary scalars |
|---|
| 126 | REAL(wp) :: zTauO, zTauE, zCor ! temporary scalars |
|---|
| 127 | |
|---|
| 128 | REAL(wp) :: zsig1, zsig2 ! internal ice stress |
|---|
| 129 | REAL(wp) :: zresm ! Maximal error on ice velocity |
|---|
| 130 | REAL(wp) :: zintb, zintn ! dummy argument |
|---|
| 131 | |
|---|
| 132 | REAL(wp), POINTER, DIMENSION(:,:) :: zpresh ! temporary array for ice strength |
|---|
| 133 | REAL(wp), POINTER, DIMENSION(:,:) :: z1_e1t0, z1_e2t0 ! scale factors |
|---|
| 134 | REAL(wp), POINTER, DIMENSION(:,:) :: zp_delt ! P/delta at T points |
|---|
| 135 | ! |
|---|
| 136 | REAL(wp), POINTER, DIMENSION(:,:) :: zaU , zaV ! ice fraction on U/V points |
|---|
| 137 | REAL(wp), POINTER, DIMENSION(:,:) :: zmU_t, zmV_t ! ice/snow mass/dt on U/V points |
|---|
| 138 | REAL(wp), POINTER, DIMENSION(:,:) :: zmf ! coriolis parameter at T points |
|---|
| 139 | REAL(wp), POINTER, DIMENSION(:,:) :: zTauU_ia , ztauV_ia ! ice-atm. stress at U-V points |
|---|
| 140 | REAL(wp), POINTER, DIMENSION(:,:) :: zspgU , zspgV ! surface pressure gradient at U/V points |
|---|
| 141 | REAL(wp), POINTER, DIMENSION(:,:) :: v_oceU, u_oceV, v_iceU, u_iceV ! ocean/ice u/v component on V/U points |
|---|
| 142 | REAL(wp), POINTER, DIMENSION(:,:) :: zfU , zfV ! internal stresses |
|---|
| 143 | |
|---|
| 144 | REAL(wp), POINTER, DIMENSION(:,:) :: zds ! shear |
|---|
| 145 | REAL(wp), POINTER, DIMENSION(:,:) :: zs1, zs2, zs12 ! stress tensor components |
|---|
| 146 | REAL(wp), POINTER, DIMENSION(:,:) :: zu_ice, zv_ice, zresr ! check convergence |
|---|
| 147 | REAL(wp), POINTER, DIMENSION(:,:) :: zpice ! array used for the calculation of ice surface slope: |
|---|
| 148 | ! ocean surface (ssh_m) if ice is not embedded |
|---|
| 149 | ! ice top surface if ice is embedded |
|---|
| 150 | REAL(wp), POINTER, DIMENSION(:,:) :: zswitchU, zswitchV ! dummy arrays |
|---|
| 151 | REAL(wp), POINTER, DIMENSION(:,:) :: zmaskU, zmaskV ! mask for ice presence |
|---|
| 152 | REAL(wp), POINTER, DIMENSION(:,:) :: zfmask, zwf ! mask at F points for the ice |
|---|
| 153 | |
|---|
| 154 | REAL(wp), PARAMETER :: zepsi = 1.0e-20_wp ! tolerance parameter |
|---|
| 155 | REAL(wp), PARAMETER :: zmmin = 1._wp ! ice mass (kg/m2) below which ice velocity equals ocean velocity |
|---|
| 156 | REAL(wp), PARAMETER :: zshlat = 2._wp ! boundary condition for sea-ice velocity (2=no slip ; 0=free slip) |
|---|
| 157 | !!------------------------------------------------------------------- |
|---|
| 158 | |
|---|
| 159 | CALL wrk_alloc( jpi,jpj, zpresh, z1_e1t0, z1_e2t0, zp_delt ) |
|---|
| 160 | CALL wrk_alloc( jpi,jpj, zaU, zaV, zmU_t, zmV_t, zmf, zTauU_ia, ztauV_ia ) |
|---|
| 161 | CALL wrk_alloc( jpi,jpj, zspgU, zspgV, v_oceU, u_oceV, v_iceU, u_iceV, zfU, zfV ) |
|---|
| 162 | CALL wrk_alloc( jpi,jpj, zds, zs1, zs2, zs12, zu_ice, zv_ice, zresr, zpice ) |
|---|
| 163 | CALL wrk_alloc( jpi,jpj, zswitchU, zswitchV, zmaskU, zmaskV, zfmask, zwf ) |
|---|
| 164 | |
|---|
| 165 | #if defined key_lim2 && ! defined key_lim2_vp |
|---|
| 166 | # if defined key_agrif |
|---|
| 167 | USE ice_2, vt_s => hsnm |
|---|
| 168 | USE ice_2, vt_i => hicm |
|---|
| 169 | # else |
|---|
| 170 | vt_s => hsnm |
|---|
| 171 | vt_i => hicm |
|---|
| 172 | # endif |
|---|
| 173 | at_i(:,:) = 1. - frld(:,:) |
|---|
| 174 | #endif |
|---|
| 175 | #if defined key_agrif && defined key_lim2 |
|---|
| 176 | CALL agrif_rhg_lim2_load ! First interpolation of coarse values |
|---|
| 177 | #endif |
|---|
| 178 | ! |
|---|
| 179 | !------------------------------------------------------------------------------! |
|---|
| 180 | ! 0) mask at F points for the ice (on the whole domain, not only k_j1,k_jpj) |
|---|
| 181 | !------------------------------------------------------------------------------! |
|---|
| 182 | ! ocean/land mask |
|---|
| 183 | DO jj = 1, jpjm1 |
|---|
| 184 | DO ji = 1, jpim1 ! NO vector opt. |
|---|
| 185 | zfmask(ji,jj) = tmask(ji,jj,1) * tmask(ji+1,jj,1) * tmask(ji,jj+1,1) * tmask(ji+1,jj+1,1) |
|---|
| 186 | END DO |
|---|
| 187 | END DO |
|---|
| 188 | CALL lbc_lnk( zfmask, 'F', 1._wp ) |
|---|
| 189 | |
|---|
| 190 | ! Lateral boundary conditions on velocity (modify zfmask) |
|---|
| 191 | zwf(:,:) = zfmask(:,:) |
|---|
| 192 | DO jj = 2, jpjm1 |
|---|
| 193 | DO ji = fs_2, fs_jpim1 ! vector opt. |
|---|
| 194 | IF( zfmask(ji,jj) == 0._wp ) THEN |
|---|
| 195 | zfmask(ji,jj) = zshlat * MIN( 1._wp , MAX( zwf(ji+1,jj), zwf(ji,jj+1), zwf(ji-1,jj), zwf(ji,jj-1) ) ) |
|---|
| 196 | ENDIF |
|---|
| 197 | END DO |
|---|
| 198 | END DO |
|---|
| 199 | DO jj = 2, jpjm1 |
|---|
| 200 | IF( zfmask(1,jj) == 0._wp ) THEN |
|---|
| 201 | zfmask(1 ,jj) = zshlat * MIN( 1._wp , MAX( zwf(2,jj), zwf(1,jj+1), zwf(1,jj-1) ) ) |
|---|
| 202 | ENDIF |
|---|
| 203 | IF( zfmask(jpi,jj) == 0._wp ) THEN |
|---|
| 204 | zfmask(jpi,jj) = zshlat * MIN( 1._wp , MAX( zwf(jpi,jj+1), zwf(jpim1,jj), zwf(jpi,jj-1) ) ) |
|---|
| 205 | ENDIF |
|---|
| 206 | END DO |
|---|
| 207 | DO ji = 2, jpim1 |
|---|
| 208 | IF( zfmask(ji,1) == 0._wp ) THEN |
|---|
| 209 | zfmask(ji,1 ) = zshlat * MIN( 1._wp , MAX( zwf(ji+1,1), zwf(ji,2), zwf(ji-1,1) ) ) |
|---|
| 210 | ENDIF |
|---|
| 211 | IF( zfmask(ji,jpj) == 0._wp ) THEN |
|---|
| 212 | zfmask(ji,jpj) = zshlat * MIN( 1._wp , MAX( zwf(ji+1,jpj), zwf(ji-1,jpj), zwf(ji,jpjm1) ) ) |
|---|
| 213 | ENDIF |
|---|
| 214 | END DO |
|---|
| 215 | CALL lbc_lnk( zfmask, 'F', 1._wp ) |
|---|
| 216 | |
|---|
| 217 | !------------------------------------------------------------------------------! |
|---|
| 218 | ! 1) define some variables and initialize arrays |
|---|
| 219 | !------------------------------------------------------------------------------! |
|---|
| 220 | ! ecc2: square of yield ellipse eccenticrity |
|---|
| 221 | ecc2 = rn_ecc * rn_ecc |
|---|
| 222 | z1_ecc2 = 1._wp / ecc2 |
|---|
| 223 | |
|---|
| 224 | ! Time step for subcycling |
|---|
| 225 | zdtevp = rdt_ice / REAL( nn_nevp ) |
|---|
| 226 | z1_dtevp = 1._wp / zdtevp |
|---|
| 227 | |
|---|
| 228 | ! alpha parameters (Bouillon 2009) |
|---|
| 229 | #if defined key_lim3 |
|---|
| 230 | zalph1 = ( 2._wp * rn_relast * rdt_ice ) * z1_dtevp |
|---|
| 231 | #else |
|---|
| 232 | zalph1 = ( 2._wp * telast ) * z1_dtevp |
|---|
| 233 | #endif |
|---|
| 234 | zalph2 = zalph1 * z1_ecc2 |
|---|
| 235 | |
|---|
| 236 | z1_alph1 = 1._wp / ( zalph1 + 1._wp ) |
|---|
| 237 | z1_alph2 = 1._wp / ( zalph2 + 1._wp ) |
|---|
| 238 | |
|---|
| 239 | ! Initialise stress tensor |
|---|
| 240 | zs1 (:,:) = stress1_i (:,:) |
|---|
| 241 | zs2 (:,:) = stress2_i (:,:) |
|---|
| 242 | zs12(:,:) = stress12_i(:,:) |
|---|
| 243 | |
|---|
| 244 | ! Ice strength |
|---|
| 245 | #if defined key_lim3 |
|---|
| 246 | CALL lim_itd_me_icestrength( nn_icestr ) |
|---|
| 247 | zpresh(:,:) = tmask(:,:,1) * strength(:,:) |
|---|
| 248 | #else |
|---|
| 249 | zpresh(:,:) = tmask(:,:,1) * pstar * vt_i(:,:) * EXP( -c_rhg * (1. - at_i(:,:) ) ) |
|---|
| 250 | #endif |
|---|
| 251 | |
|---|
| 252 | ! scale factors |
|---|
| 253 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 254 | DO ji = fs_2, fs_jpim1 |
|---|
| 255 | z1_e1t0(ji,jj) = 1._wp / ( e1t(ji+1,jj ) + e1t(ji,jj ) ) |
|---|
| 256 | z1_e2t0(ji,jj) = 1._wp / ( e2t(ji ,jj+1) + e2t(ji,jj ) ) |
|---|
| 257 | END DO |
|---|
| 258 | END DO |
|---|
| 259 | |
|---|
| 260 | ! |
|---|
| 261 | !------------------------------------------------------------------------------! |
|---|
| 262 | ! 2) Wind / ocean stress, mass terms, coriolis terms |
|---|
| 263 | !------------------------------------------------------------------------------! |
|---|
| 264 | |
|---|
| 265 | IF( nn_ice_embd == 2 ) THEN !== embedded sea ice: compute representative ice top surface ==! |
|---|
| 266 | ! |
|---|
| 267 | ! average interpolation coeff as used in dynspg = (1/nn_fsbc) * {SUM[n/nn_fsbc], n=0,nn_fsbc-1} |
|---|
| 268 | ! = (1/nn_fsbc)^2 * {SUM[n], n=0,nn_fsbc-1} |
|---|
| 269 | zintn = REAL( nn_fsbc - 1 ) / REAL( nn_fsbc ) * 0.5_wp |
|---|
| 270 | ! |
|---|
| 271 | ! average interpolation coeff as used in dynspg = (1/nn_fsbc) * {SUM[1-n/nn_fsbc], n=0,nn_fsbc-1} |
|---|
| 272 | ! = (1/nn_fsbc)^2 * (nn_fsbc^2 - {SUM[n], n=0,nn_fsbc-1}) |
|---|
| 273 | zintb = REAL( nn_fsbc + 1 ) / REAL( nn_fsbc ) * 0.5_wp |
|---|
| 274 | ! |
|---|
| 275 | zpice(:,:) = ssh_m(:,:) + ( zintn * snwice_mass(:,:) + zintb * snwice_mass_b(:,:) ) * r1_rau0 |
|---|
| 276 | ! |
|---|
| 277 | ELSE !== non-embedded sea ice: use ocean surface for slope calculation ==! |
|---|
| 278 | zpice(:,:) = ssh_m(:,:) |
|---|
| 279 | ENDIF |
|---|
| 280 | |
|---|
| 281 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 282 | DO ji = fs_2, fs_jpim1 |
|---|
| 283 | |
|---|
| 284 | ! ice fraction at U-V points |
|---|
| 285 | zaU(ji,jj) = 0.5_wp * ( at_i(ji,jj) * e12t(ji,jj) + at_i(ji+1,jj) * e12t(ji+1,jj) ) * r1_e12u(ji,jj) * umask(ji,jj,1) |
|---|
| 286 | zaV(ji,jj) = 0.5_wp * ( at_i(ji,jj) * e12t(ji,jj) + at_i(ji,jj+1) * e12t(ji,jj+1) ) * r1_e12v(ji,jj) * vmask(ji,jj,1) |
|---|
| 287 | |
|---|
| 288 | ! Ice/snow mass at U-V points |
|---|
| 289 | zm1 = ( rhosn * vt_s(ji ,jj ) + rhoic * vt_i(ji ,jj ) ) |
|---|
| 290 | zm2 = ( rhosn * vt_s(ji+1,jj ) + rhoic * vt_i(ji+1,jj ) ) |
|---|
| 291 | zm3 = ( rhosn * vt_s(ji ,jj+1) + rhoic * vt_i(ji ,jj+1) ) |
|---|
| 292 | zmassU = 0.5_wp * ( zm1 * e12t(ji,jj) + zm2 * e12t(ji+1,jj) ) * r1_e12u(ji,jj) * umask(ji,jj,1) |
|---|
| 293 | zmassV = 0.5_wp * ( zm1 * e12t(ji,jj) + zm3 * e12t(ji,jj+1) ) * r1_e12v(ji,jj) * vmask(ji,jj,1) |
|---|
| 294 | |
|---|
| 295 | ! Ocean currents at U-V points |
|---|
| 296 | v_oceU(ji,jj) = 0.5_wp * ( ( v_oce(ji ,jj) + v_oce(ji ,jj-1) ) * e1t(ji+1,jj) & |
|---|
| 297 | & + ( v_oce(ji+1,jj) + v_oce(ji+1,jj-1) ) * e1t(ji ,jj) ) * z1_e1t0(ji,jj) * umask(ji,jj,1) |
|---|
| 298 | |
|---|
| 299 | u_oceV(ji,jj) = 0.5_wp * ( ( u_oce(ji,jj ) + u_oce(ji-1,jj ) ) * e2t(ji,jj+1) & |
|---|
| 300 | & + ( u_oce(ji,jj+1) + u_oce(ji-1,jj+1) ) * e2t(ji,jj ) ) * z1_e2t0(ji,jj) * vmask(ji,jj,1) |
|---|
| 301 | |
|---|
| 302 | ! Coriolis at T points (m*f) |
|---|
| 303 | zmf(ji,jj) = zm1 * fcor(ji,jj) |
|---|
| 304 | |
|---|
| 305 | ! m/dt |
|---|
| 306 | zmU_t(ji,jj) = zmassU * z1_dtevp |
|---|
| 307 | zmV_t(ji,jj) = zmassV * z1_dtevp |
|---|
| 308 | |
|---|
| 309 | ! Drag ice-atm. |
|---|
| 310 | zTauU_ia(ji,jj) = zaU(ji,jj) * utau_ice(ji,jj) |
|---|
| 311 | zTauV_ia(ji,jj) = zaV(ji,jj) * vtau_ice(ji,jj) |
|---|
| 312 | |
|---|
| 313 | ! Surface pressure gradient (- m*g*GRAD(ssh)) at U-V points |
|---|
| 314 | zspgU(ji,jj) = - zmassU * grav * ( zpice(ji+1,jj) - zpice(ji,jj) ) * r1_e1u(ji,jj) |
|---|
| 315 | zspgV(ji,jj) = - zmassV * grav * ( zpice(ji,jj+1) - zpice(ji,jj) ) * r1_e2v(ji,jj) |
|---|
| 316 | |
|---|
| 317 | ! masks |
|---|
| 318 | zmaskU(ji,jj) = 1._wp - MAX( 0._wp, SIGN( 1._wp, -zmassU ) ) ! 0 if no ice |
|---|
| 319 | zmaskV(ji,jj) = 1._wp - MAX( 0._wp, SIGN( 1._wp, -zmassV ) ) ! 0 if no ice |
|---|
| 320 | |
|---|
| 321 | ! switches |
|---|
| 322 | zswitchU(ji,jj) = MAX( 0._wp, SIGN( 1._wp, zmassU - zmmin ) ) ! 0 if ice mass < zmmin |
|---|
| 323 | zswitchV(ji,jj) = MAX( 0._wp, SIGN( 1._wp, zmassV - zmmin ) ) ! 0 if ice mass < zmmin |
|---|
| 324 | |
|---|
| 325 | END DO |
|---|
| 326 | END DO |
|---|
| 327 | CALL lbc_lnk( zmf, 'T', 1. ) |
|---|
| 328 | ! |
|---|
| 329 | !------------------------------------------------------------------------------! |
|---|
| 330 | ! 3) Solution of the momentum equation, iterative procedure |
|---|
| 331 | !------------------------------------------------------------------------------! |
|---|
| 332 | ! |
|---|
| 333 | ! !----------------------! |
|---|
| 334 | DO jter = 1 , nn_nevp ! loop over jter ! |
|---|
| 335 | ! !----------------------! |
|---|
| 336 | IF(ln_ctl) THEN ! Convergence test |
|---|
| 337 | DO jj = k_j1, k_jpj-1 |
|---|
| 338 | zu_ice(:,jj) = u_ice(:,jj) ! velocity at previous time step |
|---|
| 339 | zv_ice(:,jj) = v_ice(:,jj) |
|---|
| 340 | END DO |
|---|
| 341 | ENDIF |
|---|
| 342 | |
|---|
| 343 | ! --- divergence, tension & shear (Appendix B of Hunke & Dukowicz, 2002) --- ! |
|---|
| 344 | DO jj = k_j1, k_jpj-1 ! loops start at 1 since there is no boundary condition (lbc_lnk) at i=1 and j=1 for F points |
|---|
| 345 | DO ji = 1, jpim1 |
|---|
| 346 | |
|---|
| 347 | ! shear at F points |
|---|
| 348 | zds(ji,jj) = ( ( u_ice(ji,jj+1) * r1_e1u(ji,jj+1) - u_ice(ji,jj) * r1_e1u(ji,jj) ) * e1f(ji,jj) * e1f(ji,jj) & |
|---|
| 349 | & + ( v_ice(ji+1,jj) * r1_e2v(ji+1,jj) - v_ice(ji,jj) * r1_e2v(ji,jj) ) * e2f(ji,jj) * e2f(ji,jj) & |
|---|
| 350 | & ) * r1_e12f(ji,jj) * zfmask(ji,jj) |
|---|
| 351 | |
|---|
| 352 | END DO |
|---|
| 353 | END DO |
|---|
| 354 | CALL lbc_lnk( zds, 'F', 1. ) |
|---|
| 355 | |
|---|
| 356 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 357 | DO ji = 2, jpim1 ! no vector loop |
|---|
| 358 | |
|---|
| 359 | ! shear**2 at T points (doc eq. A16) |
|---|
| 360 | zds2 = ( zds(ji,jj ) * zds(ji,jj ) * e12f(ji,jj ) + zds(ji-1,jj ) * zds(ji-1,jj ) * e12f(ji-1,jj ) & |
|---|
| 361 | & + zds(ji,jj-1) * zds(ji,jj-1) * e12f(ji,jj-1) + zds(ji-1,jj-1) * zds(ji-1,jj-1) * e12f(ji-1,jj-1) & |
|---|
| 362 | & ) * 0.25_wp * r1_e12t(ji,jj) |
|---|
| 363 | |
|---|
| 364 | ! divergence at T points |
|---|
| 365 | zdiv = ( e2u(ji,jj) * u_ice(ji,jj) - e2u(ji-1,jj) * u_ice(ji-1,jj) & |
|---|
| 366 | & + e1v(ji,jj) * v_ice(ji,jj) - e1v(ji,jj-1) * v_ice(ji,jj-1) & |
|---|
| 367 | & ) * r1_e12t(ji,jj) |
|---|
| 368 | zdiv2 = zdiv * zdiv |
|---|
| 369 | |
|---|
| 370 | ! tension at T points |
|---|
| 371 | zdt = ( ( u_ice(ji,jj) * r1_e2u(ji,jj) - u_ice(ji-1,jj) * r1_e2u(ji-1,jj) ) * e2t(ji,jj) * e2t(ji,jj) & |
|---|
| 372 | & - ( v_ice(ji,jj) * r1_e1v(ji,jj) - v_ice(ji,jj-1) * r1_e1v(ji,jj-1) ) * e1t(ji,jj) * e1t(ji,jj) & |
|---|
| 373 | & ) * r1_e12t(ji,jj) |
|---|
| 374 | zdt2 = zdt * zdt |
|---|
| 375 | |
|---|
| 376 | ! delta at T points |
|---|
| 377 | zdelta = SQRT( zdiv2 + ( zdt2 + zds2 ) * usecc2 ) |
|---|
| 378 | |
|---|
| 379 | ! P/delta at T points |
|---|
| 380 | zp_delt(ji,jj) = zpresh(ji,jj) / ( zdelta + rn_creepl ) |
|---|
| 381 | |
|---|
| 382 | ! stress at T points |
|---|
| 383 | zs1(ji,jj) = ( zs1(ji,jj) * zalph1 + zp_delt(ji,jj) * ( zdiv - zdelta ) ) * z1_alph1 |
|---|
| 384 | zs2(ji,jj) = ( zs2(ji,jj) * zalph2 + zp_delt(ji,jj) * ( zdt * z1_ecc2 ) ) * z1_alph2 |
|---|
| 385 | |
|---|
| 386 | END DO |
|---|
| 387 | END DO |
|---|
| 388 | CALL lbc_lnk( zp_delt, 'T', 1. ) |
|---|
| 389 | |
|---|
| 390 | DO jj = k_j1, k_jpj-1 |
|---|
| 391 | DO ji = 1, jpim1 |
|---|
| 392 | |
|---|
| 393 | ! P/delta at F points |
|---|
| 394 | zp_delf = 0.25_wp * ( zp_delt(ji,jj) + zp_delt(ji+1,jj) + zp_delt(ji,jj+1) + zp_delt(ji+1,jj+1) ) |
|---|
| 395 | |
|---|
| 396 | ! stress at F points |
|---|
| 397 | zs12(ji,jj)= ( zs12(ji,jj) * zalph2 + zp_delf * ( zds(ji,jj) * z1_ecc2 ) * 0.5_wp ) * z1_alph2 |
|---|
| 398 | |
|---|
| 399 | END DO |
|---|
| 400 | END DO |
|---|
| 401 | CALL lbc_lnk_multi( zs1, 'T', 1., zs2, 'T', 1., zs12, 'F', 1. ) |
|---|
| 402 | |
|---|
| 403 | ! --- Ice internal stresses (Appendix C of Hunke and Dukowicz, 2002) --- ! |
|---|
| 404 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 405 | DO ji = fs_2, fs_jpim1 |
|---|
| 406 | |
|---|
| 407 | ! U points |
|---|
| 408 | zfU(ji,jj) = 0.5_wp * ( ( zs1(ji+1,jj) - zs1(ji,jj) ) * e2u(ji,jj) & |
|---|
| 409 | & + ( zs2(ji+1,jj) * e2t(ji+1,jj) * e2t(ji+1,jj) - zs2(ji,jj) * e2t(ji,jj) * e2t(ji,jj) & |
|---|
| 410 | & ) * r1_e2u(ji,jj) & |
|---|
| 411 | & + ( zs12(ji,jj) * e1f(ji,jj) * e1f(ji,jj) - zs12(ji,jj-1) * e1f(ji,jj-1) * e1f(ji,jj-1) & |
|---|
| 412 | & ) * 2._wp * r1_e1u(ji,jj) & |
|---|
| 413 | & ) * r1_e12u(ji,jj) |
|---|
| 414 | |
|---|
| 415 | ! V points |
|---|
| 416 | zfV(ji,jj) = 0.5_wp * ( ( zs1(ji,jj+1) - zs1(ji,jj) ) * e1v(ji,jj) & |
|---|
| 417 | & - ( zs2(ji,jj+1) * e1t(ji,jj+1) * e1t(ji,jj+1) - zs2(ji,jj) * e1t(ji,jj) * e1t(ji,jj) & |
|---|
| 418 | & ) * r1_e1v(ji,jj) & |
|---|
| 419 | & + ( zs12(ji,jj) * e2f(ji,jj) * e2f(ji,jj) - zs12(ji-1,jj) * e2f(ji-1,jj) * e2f(ji-1,jj) & |
|---|
| 420 | & ) * 2._wp * r1_e2v(ji,jj) & |
|---|
| 421 | & ) * r1_e12v(ji,jj) |
|---|
| 422 | |
|---|
| 423 | ! u_ice at V point |
|---|
| 424 | u_iceV(ji,jj) = 0.5_wp * ( ( u_ice(ji,jj ) + u_ice(ji-1,jj ) ) * e2t(ji,jj+1) & |
|---|
| 425 | & + ( u_ice(ji,jj+1) + u_ice(ji-1,jj+1) ) * e2t(ji,jj ) ) * z1_e2t0(ji,jj) * vmask(ji,jj,1) |
|---|
| 426 | |
|---|
| 427 | ! v_ice at U point |
|---|
| 428 | v_iceU(ji,jj) = 0.5_wp * ( ( v_ice(ji ,jj) + v_ice(ji ,jj-1) ) * e1t(ji+1,jj) & |
|---|
| 429 | & + ( v_ice(ji+1,jj) + v_ice(ji+1,jj-1) ) * e1t(ji ,jj) ) * z1_e1t0(ji,jj) * umask(ji,jj,1) |
|---|
| 430 | |
|---|
| 431 | END DO |
|---|
| 432 | END DO |
|---|
| 433 | ! |
|---|
| 434 | ! --- Computation of ice velocity --- ! |
|---|
| 435 | ! Bouillon et al. 2013 (eq 47-48) => unstable unless alpha, beta are chosen wisely and large nn_nevp |
|---|
| 436 | ! Bouillon et al. 2009 (eq 34-35) => stable |
|---|
| 437 | IF( MOD(jter,2) .EQ. 0 ) THEN ! even iterations |
|---|
| 438 | |
|---|
| 439 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 440 | DO ji = fs_2, fs_jpim1 |
|---|
| 441 | |
|---|
| 442 | ! tau_io/(v_oce - v_ice) |
|---|
| 443 | zTauO = zaV(ji,jj) * rhoco * SQRT( ( v_ice (ji,jj) - v_oce (ji,jj) ) * ( v_ice (ji,jj) - v_oce (ji,jj) ) & |
|---|
| 444 | & + ( u_iceV(ji,jj) - u_oceV(ji,jj) ) * ( u_iceV(ji,jj) - u_oceV(ji,jj) ) ) |
|---|
| 445 | |
|---|
| 446 | ! Coriolis at V-points (energy conserving formulation) |
|---|
| 447 | zCor = - 0.25_wp * r1_e2v(ji,jj) * & |
|---|
| 448 | & ( zmf(ji,jj ) * ( e2u(ji,jj ) * u_ice(ji,jj ) + e2u(ji-1,jj ) * u_ice(ji-1,jj ) ) & |
|---|
| 449 | & + zmf(ji,jj+1) * ( e2u(ji,jj+1) * u_ice(ji,jj+1) + e2u(ji-1,jj+1) * u_ice(ji-1,jj+1) ) ) |
|---|
| 450 | |
|---|
| 451 | ! Sum of external forces (explicit solution) = F + tau_ia + Coriolis + spg + tau_io |
|---|
| 452 | zTauE = zfV(ji,jj) + zTauV_ia(ji,jj) + zCor + zspgV(ji,jj) + zTauO * ( v_oce(ji,jj) - v_ice(ji,jj) ) |
|---|
| 453 | |
|---|
| 454 | ! ice velocity using implicit formulation (cf Madec doc & Bouillon 2009) |
|---|
| 455 | v_ice(ji,jj) = ( ( zmV_t(ji,jj) * v_ice(ji,jj) + zTauE + zTauO * v_ice(ji,jj) & ! F + tau_ia + Coriolis + spg + tau_io(only ocean part) |
|---|
| 456 | & ) / MAX( zepsi, zmV_t(ji,jj) + zTauO ) * zswitchV(ji,jj) & ! m/dt + tau_io(only ice part) |
|---|
| 457 | & + v_oce(ji,jj) * ( 1._wp - zswitchV(ji,jj) ) & ! v_ice = v_oce if mass < zmmin |
|---|
| 458 | & ) * zmaskV(ji,jj) |
|---|
| 459 | END DO |
|---|
| 460 | END DO |
|---|
| 461 | CALL lbc_lnk( v_ice, 'V', -1. ) |
|---|
| 462 | |
|---|
| 463 | #if defined key_agrif && defined key_lim2 |
|---|
| 464 | CALL agrif_rhg_lim2( jter, nn_nevp, 'V' ) |
|---|
| 465 | #endif |
|---|
| 466 | #if defined key_bdy |
|---|
| 467 | CALL bdy_ice_lim_dyn( 'V' ) |
|---|
| 468 | #endif |
|---|
| 469 | |
|---|
| 470 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 471 | DO ji = fs_2, fs_jpim1 |
|---|
| 472 | |
|---|
| 473 | ! tau_io/(u_oce - u_ice) |
|---|
| 474 | zTauO = zaU(ji,jj) * rhoco * SQRT( ( u_ice (ji,jj) - u_oce (ji,jj) ) * ( u_ice (ji,jj) - u_oce (ji,jj) ) & |
|---|
| 475 | & + ( v_iceU(ji,jj) - v_oceU(ji,jj) ) * ( v_iceU(ji,jj) - v_oceU(ji,jj) ) ) |
|---|
| 476 | |
|---|
| 477 | ! Coriolis at U-points (energy conserving formulation) |
|---|
| 478 | zCor = 0.25_wp * r1_e1u(ji,jj) * & |
|---|
| 479 | & ( zmf(ji ,jj) * ( e1v(ji ,jj) * v_ice(ji ,jj) + e1v(ji ,jj-1) * v_ice(ji ,jj-1) ) & |
|---|
| 480 | & + zmf(ji+1,jj) * ( e1v(ji+1,jj) * v_ice(ji+1,jj) + e1v(ji+1,jj-1) * v_ice(ji+1,jj-1) ) ) |
|---|
| 481 | |
|---|
| 482 | ! Sum of external forces (explicit solution) = F + tau_ia + Coriolis + spg + tau_io |
|---|
| 483 | zTauE = zfU(ji,jj) + zTauU_ia(ji,jj) + zCor + zspgU(ji,jj) + zTauO * ( u_oce(ji,jj) - u_ice(ji,jj) ) |
|---|
| 484 | |
|---|
| 485 | ! ice velocity using implicit formulation (cf Madec doc & Bouillon 2009) |
|---|
| 486 | u_ice(ji,jj) = ( ( zmU_t(ji,jj) * u_ice(ji,jj) + zTauE + zTauO * u_ice(ji,jj) & ! F + tau_ia + Coriolis + spg + tau_io(only ocean part) |
|---|
| 487 | & ) / MAX( zepsi, zmU_t(ji,jj) + zTauO ) * zswitchU(ji,jj) & ! m/dt + tau_io(only ice part) |
|---|
| 488 | & + u_oce(ji,jj) * ( 1._wp - zswitchU(ji,jj) ) & ! v_ice = v_oce if mass < zmmin |
|---|
| 489 | & ) * zmaskU(ji,jj) |
|---|
| 490 | END DO |
|---|
| 491 | END DO |
|---|
| 492 | CALL lbc_lnk( u_ice, 'U', -1. ) |
|---|
| 493 | |
|---|
| 494 | #if defined key_agrif && defined key_lim2 |
|---|
| 495 | CALL agrif_rhg_lim2( jter, nn_nevp, 'U' ) |
|---|
| 496 | #endif |
|---|
| 497 | #if defined key_bdy |
|---|
| 498 | CALL bdy_ice_lim_dyn( 'U' ) |
|---|
| 499 | #endif |
|---|
| 500 | |
|---|
| 501 | ELSE ! odd iterations |
|---|
| 502 | |
|---|
| 503 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 504 | DO ji = fs_2, fs_jpim1 |
|---|
| 505 | |
|---|
| 506 | ! tau_io/(u_oce - u_ice) |
|---|
| 507 | zTauO = zaU(ji,jj) * rhoco * SQRT( ( u_ice (ji,jj) - u_oce (ji,jj) ) * ( u_ice (ji,jj) - u_oce (ji,jj) ) & |
|---|
| 508 | & + ( v_iceU(ji,jj) - v_oceU(ji,jj) ) * ( v_iceU(ji,jj) - v_oceU(ji,jj) ) ) |
|---|
| 509 | |
|---|
| 510 | ! Coriolis at U-points (energy conserving formulation) |
|---|
| 511 | zCor = 0.25_wp * r1_e1u(ji,jj) * & |
|---|
| 512 | & ( zmf(ji ,jj) * ( e1v(ji ,jj) * v_ice(ji ,jj) + e1v(ji ,jj-1) * v_ice(ji ,jj-1) ) & |
|---|
| 513 | & + zmf(ji+1,jj) * ( e1v(ji+1,jj) * v_ice(ji+1,jj) + e1v(ji+1,jj-1) * v_ice(ji+1,jj-1) ) ) |
|---|
| 514 | |
|---|
| 515 | ! Sum of external forces (explicit solution) = F + tau_ia + Coriolis + spg + tau_io |
|---|
| 516 | zTauE = zfU(ji,jj) + zTauU_ia(ji,jj) + zCor + zspgU(ji,jj) + zTauO * ( u_oce(ji,jj) - u_ice(ji,jj) ) |
|---|
| 517 | |
|---|
| 518 | ! ice velocity using implicit formulation (cf Madec doc & Bouillon 2009) |
|---|
| 519 | u_ice(ji,jj) = ( ( zmU_t(ji,jj) * u_ice(ji,jj) + zTauE + zTauO * u_ice(ji,jj) & ! F + tau_ia + Coriolis + spg + tau_io(only ocean part) |
|---|
| 520 | & ) / MAX( zepsi, zmU_t(ji,jj) + zTauO ) * zswitchU(ji,jj) & ! m/dt + tau_io(only ice part) |
|---|
| 521 | & + u_oce(ji,jj) * ( 1._wp - zswitchU(ji,jj) ) & ! v_ice = v_oce if mass < zmmin |
|---|
| 522 | & ) * zmaskU(ji,jj) |
|---|
| 523 | END DO |
|---|
| 524 | END DO |
|---|
| 525 | CALL lbc_lnk( u_ice, 'U', -1. ) |
|---|
| 526 | |
|---|
| 527 | #if defined key_agrif && defined key_lim2 |
|---|
| 528 | CALL agrif_rhg_lim2( jter, nn_nevp, 'U' ) |
|---|
| 529 | #endif |
|---|
| 530 | #if defined key_bdy |
|---|
| 531 | CALL bdy_ice_lim_dyn( 'U' ) |
|---|
| 532 | #endif |
|---|
| 533 | |
|---|
| 534 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 535 | DO ji = fs_2, fs_jpim1 |
|---|
| 536 | |
|---|
| 537 | ! tau_io/(v_oce - v_ice) |
|---|
| 538 | zTauO = zaV(ji,jj) * rhoco * SQRT( ( v_ice (ji,jj) - v_oce (ji,jj) ) * ( v_ice (ji,jj) - v_oce (ji,jj) ) & |
|---|
| 539 | & + ( u_iceV(ji,jj) - u_oceV(ji,jj) ) * ( u_iceV(ji,jj) - u_oceV(ji,jj) ) ) |
|---|
| 540 | |
|---|
| 541 | ! Coriolis at V-points (energy conserving formulation) |
|---|
| 542 | zCor = - 0.25_wp * r1_e2v(ji,jj) * & |
|---|
| 543 | & ( zmf(ji,jj ) * ( e2u(ji,jj ) * u_ice(ji,jj ) + e2u(ji-1,jj ) * u_ice(ji-1,jj ) ) & |
|---|
| 544 | & + zmf(ji,jj+1) * ( e2u(ji,jj+1) * u_ice(ji,jj+1) + e2u(ji-1,jj+1) * u_ice(ji-1,jj+1) ) ) |
|---|
| 545 | |
|---|
| 546 | ! Sum of external forces (explicit solution) = F + tau_ia + Coriolis + spg + tau_io |
|---|
| 547 | zTauE = zfV(ji,jj) + zTauV_ia(ji,jj) + zCor + zspgV(ji,jj) + zTauO * ( v_oce(ji,jj) - v_ice(ji,jj) ) |
|---|
| 548 | |
|---|
| 549 | ! ice velocity using implicit formulation (cf Madec doc & Bouillon 2009) |
|---|
| 550 | v_ice(ji,jj) = ( ( zmV_t(ji,jj) * v_ice(ji,jj) + zTauE + zTauO * v_ice(ji,jj) & ! F + tau_ia + Coriolis + spg + tau_io(only ocean part) |
|---|
| 551 | & ) / MAX( zepsi, zmV_t(ji,jj) + zTauO ) * zswitchV(ji,jj) & ! m/dt + tau_io(only ice part) |
|---|
| 552 | & + v_oce(ji,jj) * ( 1._wp - zswitchV(ji,jj) ) & ! v_ice = v_oce if mass < zmmin |
|---|
| 553 | & ) * zmaskV(ji,jj) |
|---|
| 554 | END DO |
|---|
| 555 | END DO |
|---|
| 556 | CALL lbc_lnk( v_ice, 'V', -1. ) |
|---|
| 557 | |
|---|
| 558 | #if defined key_agrif && defined key_lim2 |
|---|
| 559 | CALL agrif_rhg_lim2( jter, nn_nevp, 'V' ) |
|---|
| 560 | #endif |
|---|
| 561 | #if defined key_bdy |
|---|
| 562 | CALL bdy_ice_lim_dyn( 'V' ) |
|---|
| 563 | #endif |
|---|
| 564 | |
|---|
| 565 | ENDIF |
|---|
| 566 | |
|---|
| 567 | IF(ln_ctl) THEN ! Convergence test |
|---|
| 568 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 569 | zresr(:,jj) = MAX( ABS( u_ice(:,jj) - zu_ice(:,jj) ), ABS( v_ice(:,jj) - zv_ice(:,jj) ) ) |
|---|
| 570 | END DO |
|---|
| 571 | zresm = MAXVAL( zresr( 1:jpi, k_j1+1:k_jpj-1 ) ) |
|---|
| 572 | IF( lk_mpp ) CALL mpp_max( zresm ) ! max over the global domain |
|---|
| 573 | ENDIF |
|---|
| 574 | ! |
|---|
| 575 | ! ! ==================== ! |
|---|
| 576 | END DO ! end loop over jter ! |
|---|
| 577 | ! ! ==================== ! |
|---|
| 578 | ! |
|---|
| 579 | !------------------------------------------------------------------------------! |
|---|
| 580 | ! 4) Recompute delta, shear and div (inputs for mechanical redistribution) |
|---|
| 581 | !------------------------------------------------------------------------------! |
|---|
| 582 | DO jj = k_j1, k_jpj-1 |
|---|
| 583 | DO ji = 1, jpim1 |
|---|
| 584 | |
|---|
| 585 | ! shear at F points |
|---|
| 586 | zds(ji,jj) = ( ( u_ice(ji,jj+1) * r1_e1u(ji,jj+1) - u_ice(ji,jj) * r1_e1u(ji,jj) ) * e1f(ji,jj) * e1f(ji,jj) & |
|---|
| 587 | & + ( v_ice(ji+1,jj) * r1_e2v(ji+1,jj) - v_ice(ji,jj) * r1_e2v(ji,jj) ) * e2f(ji,jj) * e2f(ji,jj) & |
|---|
| 588 | & ) * r1_e12f(ji,jj) * zfmask(ji,jj) |
|---|
| 589 | |
|---|
| 590 | END DO |
|---|
| 591 | END DO |
|---|
| 592 | CALL lbc_lnk( zds, 'F', 1. ) |
|---|
| 593 | |
|---|
| 594 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 595 | DO ji = 2, jpim1 ! no vector loop |
|---|
| 596 | |
|---|
| 597 | ! tension**2 at T points |
|---|
| 598 | zdt = ( ( u_ice(ji,jj) * r1_e2u(ji,jj) - u_ice(ji-1,jj) * r1_e2u(ji-1,jj) ) * e2t(ji,jj) * e2t(ji,jj) & |
|---|
| 599 | & - ( v_ice(ji,jj) * r1_e1v(ji,jj) - v_ice(ji,jj-1) * r1_e1v(ji,jj-1) ) * e1t(ji,jj) * e1t(ji,jj) & |
|---|
| 600 | & ) * r1_e12t(ji,jj) |
|---|
| 601 | zdt2 = zdt * zdt |
|---|
| 602 | |
|---|
| 603 | ! shear**2 at T points (doc eq. A16) |
|---|
| 604 | zds2 = ( zds(ji,jj ) * zds(ji,jj ) * e12f(ji,jj ) + zds(ji-1,jj ) * zds(ji-1,jj ) * e12f(ji-1,jj ) & |
|---|
| 605 | & + zds(ji,jj-1) * zds(ji,jj-1) * e12f(ji,jj-1) + zds(ji-1,jj-1) * zds(ji-1,jj-1) * e12f(ji-1,jj-1) & |
|---|
| 606 | & ) * 0.25_wp * r1_e12t(ji,jj) |
|---|
| 607 | |
|---|
| 608 | ! shear at T points |
|---|
| 609 | shear_i(ji,jj) = SQRT( zdt2 + zds2 ) |
|---|
| 610 | |
|---|
| 611 | ! divergence at T points |
|---|
| 612 | divu_i(ji,jj) = ( e2u(ji,jj) * u_ice(ji,jj) - e2u(ji-1,jj) * u_ice(ji-1,jj) & |
|---|
| 613 | & + e1v(ji,jj) * v_ice(ji,jj) - e1v(ji,jj-1) * v_ice(ji,jj-1) & |
|---|
| 614 | & ) * r1_e12t(ji,jj) |
|---|
| 615 | |
|---|
| 616 | ! delta at T points |
|---|
| 617 | zdelta = SQRT( divu_i(ji,jj) * divu_i(ji,jj) + ( zdt2 + zds2 ) * usecc2 ) |
|---|
| 618 | rswitch = 1._wp - MAX( 0._wp, SIGN( 1._wp, -zdelta ) ) ! 0 if delta=0 |
|---|
| 619 | delta_i(ji,jj) = zdelta + rn_creepl * rswitch |
|---|
| 620 | |
|---|
| 621 | END DO |
|---|
| 622 | END DO |
|---|
| 623 | CALL lbc_lnk_multi( shear_i, 'T', 1., divu_i, 'T', 1., delta_i, 'T', 1. ) |
|---|
| 624 | |
|---|
| 625 | ! --- Store the stress tensor for the next time step --- ! |
|---|
| 626 | stress1_i (:,:) = zs1 (:,:) |
|---|
| 627 | stress2_i (:,:) = zs2 (:,:) |
|---|
| 628 | stress12_i(:,:) = zs12(:,:) |
|---|
| 629 | |
|---|
| 630 | ! |
|---|
| 631 | !------------------------------------------------------------------------------! |
|---|
| 632 | ! 5) Control prints of residual and charge ellipse |
|---|
| 633 | !------------------------------------------------------------------------------! |
|---|
| 634 | ! |
|---|
| 635 | ! print the residual for convergence |
|---|
| 636 | IF(ln_ctl) THEN |
|---|
| 637 | WRITE(charout,FMT="('lim_rhg : res =',D23.16, ' iter =',I4)") zresm, jter |
|---|
| 638 | CALL prt_ctl_info(charout) |
|---|
| 639 | CALL prt_ctl(tab2d_1=u_ice, clinfo1=' lim_rhg : u_ice :', tab2d_2=v_ice, clinfo2=' v_ice :') |
|---|
| 640 | ENDIF |
|---|
| 641 | |
|---|
| 642 | ! print charge ellipse |
|---|
| 643 | ! This can be desactivated once the user is sure that the stress state |
|---|
| 644 | ! lie on the charge ellipse. See Bouillon et al. 08 for more details |
|---|
| 645 | IF(ln_ctl) THEN |
|---|
| 646 | CALL prt_ctl_info('lim_rhg : numit :',ivar1=numit) |
|---|
| 647 | CALL prt_ctl_info('lim_rhg : nwrite :',ivar1=nwrite) |
|---|
| 648 | CALL prt_ctl_info('lim_rhg : MOD :',ivar1=MOD(numit,nwrite)) |
|---|
| 649 | IF( MOD(numit,nwrite) .EQ. 0 ) THEN |
|---|
| 650 | WRITE(charout,FMT="('lim_rhg :', I4, I6, I1, I1, A10)") 1000, numit, 0, 0, ' ch. ell. ' |
|---|
| 651 | CALL prt_ctl_info(charout) |
|---|
| 652 | DO jj = k_j1+1, k_jpj-1 |
|---|
| 653 | DO ji = 2, jpim1 |
|---|
| 654 | IF (zpresh(ji,jj) > 1.0) THEN |
|---|
| 655 | zsig1 = ( zs1(ji,jj) + (zs2(ji,jj)**2 + 4*zs12(ji,jj)**2 )**0.5 ) / ( 2*zpresh(ji,jj) ) |
|---|
| 656 | zsig2 = ( zs1(ji,jj) - (zs2(ji,jj)**2 + 4*zs12(ji,jj)**2 )**0.5 ) / ( 2*zpresh(ji,jj) ) |
|---|
| 657 | WRITE(charout,FMT="('lim_rhg :', I4, I4, D23.16, D23.16, D23.16, D23.16, A10)") |
|---|
| 658 | CALL prt_ctl_info(charout) |
|---|
| 659 | ENDIF |
|---|
| 660 | END DO |
|---|
| 661 | END DO |
|---|
| 662 | WRITE(charout,FMT="('lim_rhg :', I4, I6, I1, I1, A10)") 2000, numit, 0, 0, ' ch. ell. ' |
|---|
| 663 | CALL prt_ctl_info(charout) |
|---|
| 664 | ENDIF |
|---|
| 665 | ENDIF |
|---|
| 666 | ! |
|---|
| 667 | CALL wrk_dealloc( jpi,jpj, zpresh, z1_e1t0, z1_e2t0, zp_delt ) |
|---|
| 668 | CALL wrk_dealloc( jpi,jpj, zaU, zaV, zmU_t, zmV_t, zmf, zTauU_ia, ztauV_ia ) |
|---|
| 669 | CALL wrk_dealloc( jpi,jpj, zspgU, zspgV, v_oceU, u_oceV, v_iceU, u_iceV, zfU, zfV ) |
|---|
| 670 | CALL wrk_dealloc( jpi,jpj, zds, zs1, zs2, zs12, zu_ice, zv_ice, zresr, zpice ) |
|---|
| 671 | CALL wrk_dealloc( jpi,jpj, zswitchU, zswitchV, zmaskU, zmaskV, zfmask, zwf ) |
|---|
| 672 | |
|---|
| 673 | END SUBROUTINE lim_rhg |
|---|
| 674 | |
|---|
| 675 | #else |
|---|
| 676 | !!---------------------------------------------------------------------- |
|---|
| 677 | !! Default option Dummy module NO LIM sea-ice model |
|---|
| 678 | !!---------------------------------------------------------------------- |
|---|
| 679 | CONTAINS |
|---|
| 680 | SUBROUTINE lim_rhg( k1 , k2 ) ! Dummy routine |
|---|
| 681 | WRITE(*,*) 'lim_rhg: You should not have seen this print! error?', k1, k2 |
|---|
| 682 | END SUBROUTINE lim_rhg |
|---|
| 683 | #endif |
|---|
| 684 | |
|---|
| 685 | !!============================================================================== |
|---|
| 686 | END MODULE limrhg |
|---|
