New URL for NEMO forge!   http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.
icestp.F90 in NEMO/trunk/src/ICE – NEMO

source: NEMO/trunk/src/ICE/icestp.F90 @ 9872

Last change on this file since 9872 was 9872, checked in by clem, 6 years ago

removing the very last bits (I hope) of LIM references in the code

File size: 22.6 KB
RevLine 
[8586]1MODULE icestp
2   !!======================================================================
3   !!                       ***  MODULE  icestp  ***
[9604]4   !! sea ice : Master routine for all the sea ice model
[8586]5   !!=====================================================================
[9604]6   !!
7   !! The sea ice model SI3 (Sea Ice modelling Integrated Initiative),
8   !!                        aka Sea Ice cube for its nickname
9   !!
10   !!    is originally based on LIM3, developed in Louvain-la-Neuve by:
11   !!       * Martin Vancoppenolle (UCL-ASTR, Belgium)
12   !!       * Sylvain Bouillon (UCL-ASTR, Belgium)
13   !!       * Miguel Angel Morales Maqueda (NOC-L, UK)
14   !!      thanks to valuable earlier work by
15   !!       * Thierry Fichefet
16   !!       * Hugues Goosse
17   !!      thanks also to the following persons who contributed
18   !!       * Gurvan Madec, Claude Talandier, Christian Ethe (LOCEAN, France)
19   !!       * Xavier Fettweis (UCL-ASTR), Ralph Timmermann (AWI, Germany)
20   !!       * Bill Lipscomb (LANL), Cecilia Bitz (UWa) and Elisabeth Hunke (LANL), USA.
21   !!
22   !! SI3 has been made possible by a handful of persons who met as working group
[9866]23   !!      (from France, Belgium, UK and Italy)
[9653]24   !!    * Clement Rousset, Martin Vancoppenolle & Gurvan Madec (LOCEAN, France)
25   !!    * Matthieu Chevalier & David Salas (Meteo France, France)
26   !!    * Gilles Garric (Mercator Ocean, France)
27   !!    * Thierry Fichefet & Francois Massonnet (UCL, Belgium)
28   !!    * Ed Blockley & Jeff Ridley (Met Office, UK)
29   !!    * Danny Feltham & David Schroeder (CPOM, UK)
30   !!    * Yevgeny Aksenov (NOC, UK)
31   !!    * Paul Holland (BAS, UK)
32   !!    * Dorotea Iovino (CMCC, Italy)
[9604]33   !!======================================================================
34   !! History :  4.0  !  2018     (C. Rousset)      Original code SI3
[8586]35   !!----------------------------------------------------------------------
[9570]36#if defined key_si3
[8586]37   !!----------------------------------------------------------------------
[9570]38   !!   'key_si3'                                       SI3 sea-ice model
[8586]39   !!----------------------------------------------------------------------
40   !!   ice_stp       : sea-ice model time-stepping and update ocean SBC over ice-covered area
41   !!   ice_init      : initialize sea-ice
42   !!----------------------------------------------------------------------
43   USE oce            ! ocean dynamics and tracers
44   USE dom_oce        ! ocean space and time domain
45   USE c1d            ! 1D vertical configuration
46   USE ice            ! sea-ice: variables
47   USE ice1D          ! sea-ice: thermodynamical 1D variables
48   !
49   USE phycst         ! Define parameters for the routines
50   USE eosbn2         ! equation of state
51   USE sbc_oce        ! Surface boundary condition: ocean fields
52   USE sbc_ice        ! Surface boundary condition: ice   fields
53   !
54   USE iceforcing     ! sea-ice: Surface boundary condition       !!gm why not icesbc module name
55   USE icedyn         ! sea-ice: dynamics
56   USE icethd         ! sea-ice: thermodynamics
57   USE icecor         ! sea-ice: corrections
58   USE iceupdate      ! sea-ice: sea surface boundary condition update
59   USE icedia         ! sea-ice: budget diagnostics
60   USE icewri         ! sea-ice: outputs
61   USE icerst         ! sea-ice: restarts
62   USE icevar         ! sea-ice: operations
63   USE icectl         ! sea-ice: control
64   USE iceistate      ! sea-ice: initial state
65   USE iceitd         ! sea-ice: remapping thickness distribution
66   USE icealb         ! sea-ice: albedo
67   !
68   USE bdy_oce , ONLY : ln_bdy   ! flag for bdy
69   USE bdyice         ! unstructured open boundary data for sea-ice
70# if defined key_agrif
71   USE agrif_ice
[9596]72   USE agrif_ice_interp
[8586]73# endif
74   !
75   USE in_out_manager ! I/O manager
76   USE iom            ! I/O manager library
77   USE lib_mpp        ! MPP library
78   USE lib_fortran    ! fortran utilities (glob_sum + no signed zero)
79   USE timing         ! Timing
80   USE prtctl         ! Print control
81
82   IMPLICIT NONE
83   PRIVATE
84
85   PUBLIC   ice_stp    ! called by sbcmod.F90
86   PUBLIC   ice_init   ! called by sbcmod.F90
87
88   !! * Substitutions
89#  include "vectopt_loop_substitute.h90"
90   !!----------------------------------------------------------------------
[9598]91   !! NEMO/ICE 4.0 , NEMO Consortium (2018)
[8586]92   !! $Id: icestp.F90 8319 2017-07-11 15:00:44Z clem $
[9598]93   !! Software governed by the CeCILL licence     (./LICENSE)
[8586]94   !!----------------------------------------------------------------------
95CONTAINS
96
97   SUBROUTINE ice_stp( kt, ksbc )
98      !!---------------------------------------------------------------------
99      !!                  ***  ROUTINE ice_stp  ***
100      !!
101      !! ** Purpose :   sea-ice model time-stepping and update ocean surface
102      !!              boundary condition over ice-covered area
103      !!
104      !! ** Method  :   ice model time stepping
105      !!              - call the ice dynamics routine
106      !!              - call the ice advection/diffusion routine
107      !!              - call the ice thermodynamics routine
108      !!              - call the routine that computes mass and
109      !!                heat fluxes at the ice/ocean interface
110      !!              - save the outputs
111      !!              - save the outputs for restart when necessary
112      !!
113      !! ** Action  : - time evolution of the LIM sea-ice model
114      !!              - update all sbc variables below sea-ice:
115      !!                utau, vtau, taum, wndm, qns , qsr, emp , sfx
116      !!---------------------------------------------------------------------
117      INTEGER, INTENT(in) ::   kt      ! ocean time step
118      INTEGER, INTENT(in) ::   ksbc    ! flux formulation (user defined, bulk, or Pure Coupled)
119      !
120      INTEGER ::   jl   ! dummy loop index
121      !!----------------------------------------------------------------------
122      !
[9124]123      IF( ln_timing )   CALL timing_start('ice_stp')
[8586]124      !
125      !                                      !-----------------------!
126      IF( MOD( kt-1, nn_fsbc ) == 0 ) THEN   ! --- Ice time step --- !
127         !                                   !-----------------------!
128         !
129         kt_ice = kt                              ! -- Ice model time step
130         !
131         u_oce(:,:) = ssu_m(:,:)                  ! -- mean surface ocean current
132         v_oce(:,:) = ssv_m(:,:)
133         !
134         CALL eos_fzp( sss_m(:,:) , t_bo(:,:) )   ! -- freezing temperature [Kelvin] (set to rt0 over land)
135         t_bo(:,:) = ( t_bo(:,:) + rt0 ) * tmask(:,:,1) + rt0 * ( 1._wp - tmask(:,:,1) )
136         !
[9482]137         !                          !==  AGRIF Parent to Child  ==!
138#if defined key_agrif
[9872]139         !                              ! nbstep_ice ranges from 1 to the nb of child ocean steps inside one parent ice step
140         IF( .NOT. Agrif_Root() )       nbstep_ice = MOD( nbstep_ice, Agrif_irhot() * Agrif_Parent(nn_fsbc) / nn_fsbc ) + 1
[9482]141         !                              ! these calls must remain here for restartability purposes
[9610]142                                        CALL agrif_interp_ice( 'T' ) 
143                                        CALL agrif_interp_ice( 'U' )
144                                        CALL agrif_interp_ice( 'V' )
[9482]145#endif
146                                        CALL store_fields             ! Store now ice values
[8586]147         !
148         !------------------------------------------------!
149         ! --- Dynamical coupling with the atmosphere --- !
150         !------------------------------------------------!
151         ! It provides the following fields used in sea ice model:
152         !    utau_ice, vtau_ice = surface ice stress [N/m2]
153         !------------------------------------------------!
154                                        CALL ice_forcing_tau( kt, ksbc, utau_ice, vtau_ice )         
155         !-------------------------------------!
156         ! --- ice dynamics and advection  --- !
157         !-------------------------------------!
[9482]158                                        CALL diag_set0                ! set diag of mass, heat and salt fluxes to 0
159                                        CALL ice_rst_opn( kt )        ! Open Ice restart file (if necessary)
[8586]160         !
161         IF( ln_icedyn .AND. .NOT.lk_c1d )   &
162            &                           CALL ice_dyn( kt )            ! -- Ice dynamics
163         !
164         !                          !==  lateral boundary conditions  ==!
165         IF( ln_icethd .AND. ln_bdy )   CALL bdy_ice( kt )            ! -- bdy ice thermo
166         !
[9482]167         !                          !==  previous lead fraction and ice volume for flux calculations
168                                        CALL ice_var_glo2eqv          ! h_i and h_s for ice albedo calculation
169                                        CALL ice_var_agg(1)           ! at_i for coupling
170                                        CALL store_fields             ! Store now ice values
[8586]171         !
172         !------------------------------------------------------!
173         ! --- Thermodynamical coupling with the atmosphere --- !
174         !------------------------------------------------------!
175         ! It provides the following fields used in sea ice model:
176         !    emp_oce , emp_ice    = E-P over ocean and sea ice                    [Kg/m2/s]
177         !    sprecip              = solid precipitation                           [Kg/m2/s]
178         !    evap_ice             = sublimation                                   [Kg/m2/s]
179         !    qsr_tot , qns_tot    = solar & non solar heat flux (total)           [W/m2]
180         !    qsr_ice , qns_ice    = solar & non solar heat flux over ice          [W/m2]
181         !    dqns_ice             = non solar  heat sensistivity                  [W/m2]
182         !    qemp_oce, qemp_ice,  = sensible heat (associated with evap & precip) [W/m2]
183         !    qprec_ice, qevap_ice
184         !------------------------------------------------------!
185                                        CALL ice_forcing_flx( kt, ksbc )
186         !----------------------------!
187         ! --- ice thermodynamics --- !
188         !----------------------------!
189         IF( ln_icethd )                CALL ice_thd( kt )            ! -- Ice thermodynamics     
190         !
191         !
192         IF( ln_icethd )                CALL ice_cor( kt , 2 )        ! -- Corrections
[9482]193         !
194                                        CALL ice_var_glo2eqv          ! necessary calls (at least for coupling)
195                                        CALL ice_var_agg( 2 )         ! necessary calls (at least for coupling)
196         !
[8586]197!! clem: one should switch the calculation of the fluxes onto the parent grid but the following calls do not work
[9596]198!!       moreover it should only be called at the update frequency (as in agrif_ice_update.F90)
[9482]199!# if defined key_agrif
200!         IF( .NOT. Agrif_Root() )     CALL Agrif_ChildGrid_To_ParentGrid()
201!# endif
[8586]202                                        CALL ice_update_flx( kt )     ! -- Update ocean surface mass, heat and salt fluxes
[9482]203!# if defined key_agrif
204!         IF( .NOT. Agrif_Root() )     CALL Agrif_ParentGrid_To_ChildGrid()
205!# endif
[8586]206         IF( ln_icediahsb )             CALL ice_dia( kt )            ! -- Diagnostics outputs
207         !
208                                        CALL ice_wri( kt )            ! -- Ice outputs
209         !
210         IF( lrst_ice )                 CALL ice_rst_write( kt )      ! -- Ice restart file
211         !
212         IF( ln_icectl )                CALL ice_ctl( kt )            ! -- alerts in case of model crash
213         !
214      ENDIF   ! End sea-ice time step only
215
216      !-------------------------!
217      ! --- Ocean time step --- !
218      !-------------------------!
219      IF( ln_icedyn )                   CALL ice_update_tau( kt, ub(:,:,1), vb(:,:,1) )   ! -- update surface ocean stresses
220!!gm   remark, the ocean-ice stress is not saved in ice diag call above .....  find a solution!!!
221      !
[9124]222      IF( ln_timing )   CALL timing_stop('ice_stp')
[8586]223      !
224   END SUBROUTINE ice_stp
225
226
227   SUBROUTINE ice_init
228      !!----------------------------------------------------------------------
229      !!                  ***  ROUTINE ice_init  ***
230      !!
231      !! ** purpose :   Initialize sea-ice parameters
232      !!----------------------------------------------------------------------
233      INTEGER :: ji, jj, ierr
234      !!----------------------------------------------------------------------
235      IF(lwp) WRITE(numout,*)
236      IF(lwp) WRITE(numout,*) 'ice_init: Arrays allocation & Initialization off all routines & init state' 
237      IF(lwp) WRITE(numout,*) '~~~~~~~~'
238      !
239      !                                ! Open the reference and configuration namelist files and namelist output file
240      CALL ctl_opn( numnam_ice_ref, 'namelist_ice_ref',    'OLD',     'FORMATTED', 'SEQUENTIAL', -1, numout, lwp )
241      CALL ctl_opn( numnam_ice_cfg, 'namelist_ice_cfg',    'OLD',     'FORMATTED', 'SEQUENTIAL', -1, numout, lwp )
242      IF(lwm) CALL ctl_opn( numoni, 'output.namelist.ice', 'UNKNOWN', 'FORMATTED', 'SEQUENTIAL', -1, numout, lwp, 1 )
243      !
244      CALL par_init                ! set some ice run parameters
245      !
246      !                                ! Allocate the ice arrays (sbc_ice already allocated in sbc_init)
247      ierr =        ice_alloc        ()      ! ice variables
248      ierr = ierr + sbc_ice_alloc    ()      ! surface forcing
249      ierr = ierr + ice1D_alloc      ()      ! thermodynamics
250      !
251      IF( lk_mpp    )   CALL mpp_sum( ierr )
252      IF( ierr /= 0 )   CALL ctl_stop('STOP', 'ice_init : unable to allocate ice arrays')
253      !
254      CALL ice_itd_init                ! ice thickness distribution initialization
255      !
[9118]256      CALL ice_thd_init                ! set ice thermodynics parameters (clem: important to call it first for melt ponds)
257      !
[8586]258      !                                ! Initial sea-ice state
259      IF( .NOT. ln_rstart ) THEN              ! start from rest: sea-ice deduced from sst
260         CALL ice_istate_init
261         CALL ice_istate
262      ELSE                                    ! start from a restart file
263         CALL ice_rst_read
264      ENDIF
265      CALL ice_var_glo2eqv
[9725]266      CALL ice_var_agg(1)
[8586]267      !
268      CALL ice_forcing_init            ! set ice-ocean and ice-atm. coupling parameters
269      !
[9118]270      CALL ice_dyn_init                ! set ice dynamics parameters
[8586]271      !
272      CALL ice_update_init             ! ice surface boundary condition
273      !
274      CALL ice_alb_init                ! ice surface albedo
275      !
276      CALL ice_dia_init                ! initialization for diags
277      !
278      fr_i  (:,:)   = at_i(:,:)        ! initialisation of sea-ice fraction
279      tn_ice(:,:,:) = t_su(:,:,:)      ! initialisation of surface temp for coupled simu
280      !
281      !                                ! set max concentration in both hemispheres
282      WHERE( gphit(:,:) > 0._wp )   ;   rn_amax_2d(:,:) = rn_amax_n  ! NH
283      ELSEWHERE                     ;   rn_amax_2d(:,:) = rn_amax_s  ! SH
284      END WHERE
285
286      IF( ln_rstart )   CALL iom_close( numrir )  ! close input ice restart file
287      !
288   END SUBROUTINE ice_init
289
290
291   SUBROUTINE par_init
292      !!-------------------------------------------------------------------
293      !!                  ***  ROUTINE par_init ***
294      !!
295      !! ** Purpose :   Definition generic parameters for ice model
296      !!
297      !! ** Method  :   Read namelist and check the parameter
298      !!                values called at the first timestep (nit000)
299      !!
300      !! ** input   :   Namelist nampar
301      !!-------------------------------------------------------------------
[9169]302      INTEGER  ::   ios                 ! Local integer
303      !!
[9076]304      NAMELIST/nampar/ jpl, nlay_i, nlay_s, nn_virtual_itd, ln_icedyn, ln_icethd, rn_amax_n, rn_amax_s,  &
[8586]305         &             cn_icerst_in, cn_icerst_indir, cn_icerst_out, cn_icerst_outdir
306      !!-------------------------------------------------------------------
307      !
308      REWIND( numnam_ice_ref )      ! Namelist nampar in reference namelist : Parameters for ice
309      READ  ( numnam_ice_ref, nampar, IOSTAT = ios, ERR = 901)
[9169]310901   IF( ios /= 0 )   CALL ctl_nam ( ios , 'nampar in reference namelist', lwp )
[8586]311      REWIND( numnam_ice_cfg )      ! Namelist nampar in configuration namelist : Parameters for ice
312      READ  ( numnam_ice_cfg, nampar, IOSTAT = ios, ERR = 902 )
[9169]313902   IF( ios > 0 )   CALL ctl_nam ( ios , 'nampar in configuration namelist', lwp )
314      IF(lwm) WRITE( numoni, nampar )
[8586]315      !
316      IF(lwp) THEN                  ! control print
317         WRITE(numout,*)
[9169]318         WRITE(numout,*) '   par_init: ice parameters shared among all the routines'
319         WRITE(numout,*) '   ~~~~~~~~'
320         WRITE(numout,*) '      Namelist nampar: '
321         WRITE(numout,*) '         number of ice  categories                           jpl       = ', jpl
322         WRITE(numout,*) '         number of ice  layers                               nlay_i    = ', nlay_i
323         WRITE(numout,*) '         number of snow layers                               nlay_s    = ', nlay_s
324         WRITE(numout,*) '         virtual ITD param for jpl=1 (1-3) or not (0)   nn_virtual_itd = ', nn_virtual_itd
325         WRITE(numout,*) '         Ice dynamics       (T) or not (F)                   ln_icedyn = ', ln_icedyn
326         WRITE(numout,*) '         Ice thermodynamics (T) or not (F)                   ln_icethd = ', ln_icethd
327         WRITE(numout,*) '         maximum ice concentration for NH                              = ', rn_amax_n 
328         WRITE(numout,*) '         maximum ice concentration for SH                              = ', rn_amax_s
[8586]329      ENDIF
330      !                                        !--- check consistency
[9076]331      IF ( jpl > 1 .AND. nn_virtual_itd == 1 ) THEN
332         nn_virtual_itd = 0
[8586]333         IF(lwp) WRITE(numout,*)
[9076]334         IF(lwp) WRITE(numout,*) '   nn_virtual_itd forced to 0 as jpl>1, no need with multiple categories to emulate them'
[8586]335      ENDIF
[8933]336      !
[9604]337      IF( ln_cpl .AND. nn_cats_cpl /= 1 .AND. nn_cats_cpl /= jpl ) THEN
338         CALL ctl_stop( 'STOP', 'par_init: in coupled mode, nn_cats_cpl should be either 1 or jpl' )
339      ENDIF
[8586]340      !
341      IF( ln_bdy .AND. ln_icediachk )   CALL ctl_warn('par_init: online conservation check does not work with BDY')
342      !
[9169]343      rdt_ice   = REAL(nn_fsbc) * rdt          !--- sea-ice timestep and its inverse
[8586]344      r1_rdtice = 1._wp / rdt_ice
[9169]345      IF(lwp) WRITE(numout,*)
346      IF(lwp) WRITE(numout,*) '      ice timestep rdt_ice = nn_fsbc*rdt = ', rdt_ice
[8586]347      !
348      r1_nlay_i = 1._wp / REAL( nlay_i, wp )   !--- inverse of nlay_i and nlay_s
349      r1_nlay_s = 1._wp / REAL( nlay_s, wp )
350      !
351   END SUBROUTINE par_init
352
353
354   SUBROUTINE store_fields
355      !!----------------------------------------------------------------------
356      !!                  ***  ROUTINE store_fields  ***
357      !!
358      !! ** purpose :  store ice variables at "before" time step
359      !!----------------------------------------------------------------------
360      INTEGER  ::   ji, jj, jl      ! dummy loop index
361      !!----------------------------------------------------------------------
362      !
363      a_i_b (:,:,:)   = a_i (:,:,:)     ! ice area
364      v_i_b (:,:,:)   = v_i (:,:,:)     ! ice volume
365      v_s_b (:,:,:)   = v_s (:,:,:)     ! snow volume
366      sv_i_b(:,:,:)   = sv_i(:,:,:)     ! salt content
367      oa_i_b(:,:,:)   = oa_i(:,:,:)     ! areal age content
368      e_s_b (:,:,:,:) = e_s (:,:,:,:)   ! snow thermal energy
369      e_i_b (:,:,:,:) = e_i (:,:,:,:)   ! ice thermal energy
370      WHERE( a_i_b(:,:,:) >= epsi20 )
371         h_i_b(:,:,:) = v_i_b (:,:,:) / a_i_b(:,:,:)   ! ice thickness
372         h_s_b(:,:,:) = v_s_b (:,:,:) / a_i_b(:,:,:)   ! snw thickness
373      ELSEWHERE
374         h_i_b(:,:,:) = 0._wp
375         h_s_b(:,:,:) = 0._wp
376      END WHERE
[9169]377      !
[8586]378      ! ice velocities & total concentration
379      at_i_b(:,:)  = SUM( a_i_b(:,:,:), dim=3 )
380      u_ice_b(:,:) = u_ice(:,:)
381      v_ice_b(:,:) = v_ice(:,:)
382      !
383   END SUBROUTINE store_fields
384
385
386   SUBROUTINE diag_set0
387      !!----------------------------------------------------------------------
388      !!                  ***  ROUTINE diag_set0  ***
389      !!
390      !! ** purpose :  set ice-ocean and ice-atm. fluxes to zeros at the beggining
391      !!               of the time step
392      !!----------------------------------------------------------------------
393      INTEGER  ::   ji, jj      ! dummy loop index
394      !!----------------------------------------------------------------------
395      sfx    (:,:) = 0._wp   ;
396      sfx_bri(:,:) = 0._wp   ;   sfx_lam(:,:) = 0._wp
397      sfx_sni(:,:) = 0._wp   ;   sfx_opw(:,:) = 0._wp
398      sfx_bog(:,:) = 0._wp   ;   sfx_dyn(:,:) = 0._wp
399      sfx_bom(:,:) = 0._wp   ;   sfx_sum(:,:) = 0._wp
400      sfx_res(:,:) = 0._wp   ;   sfx_sub(:,:) = 0._wp
401      !
402      wfx_snw(:,:) = 0._wp   ;   wfx_ice(:,:) = 0._wp
403      wfx_sni(:,:) = 0._wp   ;   wfx_opw(:,:) = 0._wp
404      wfx_bog(:,:) = 0._wp   ;   wfx_dyn(:,:) = 0._wp
405      wfx_bom(:,:) = 0._wp   ;   wfx_sum(:,:) = 0._wp
406      wfx_res(:,:) = 0._wp   ;   wfx_sub(:,:) = 0._wp
407      wfx_spr(:,:) = 0._wp   ;   wfx_lam(:,:) = 0._wp 
408      wfx_snw_dyn(:,:) = 0._wp ; wfx_snw_sum(:,:) = 0._wp
409      wfx_snw_sub(:,:) = 0._wp ; wfx_ice_sub(:,:) = 0._wp
410      wfx_snw_sni(:,:) = 0._wp 
411      wfx_pnd(:,:) = 0._wp
412
413      hfx_thd(:,:) = 0._wp   ;
414      hfx_snw(:,:) = 0._wp   ;   hfx_opw(:,:) = 0._wp
415      hfx_bog(:,:) = 0._wp   ;   hfx_dyn(:,:) = 0._wp
416      hfx_bom(:,:) = 0._wp   ;   hfx_sum(:,:) = 0._wp
417      hfx_res(:,:) = 0._wp   ;   hfx_sub(:,:) = 0._wp
418      hfx_spr(:,:) = 0._wp   ;   hfx_dif(:,:) = 0._wp
419      hfx_err_rem(:,:) = 0._wp
420      hfx_err_dif(:,:) = 0._wp
421      wfx_err_sub(:,:) = 0._wp
422      !
423      afx_tot(:,:) = 0._wp   ;
424      !
425      diag_heat(:,:) = 0._wp ;   diag_sice(:,:) = 0._wp
426      diag_vice(:,:) = 0._wp ;   diag_vsnw(:,:) = 0._wp
427
428      ! SIMIP diagnostics
[8933]429      diag_fc_bo(:,:) = 0._wp ; diag_fc_su(:,:) = 0._wp
[9448]430      t_si(:,:,:) = rt0       ! temp at the ice-snow interface
[8586]431
[8933]432      tau_icebfr(:,:)   = 0._wp   ! landfast ice param only (clem: important to keep the init here)
433      cnd_ice   (:,:,:) = 0._wp   ! initialisation of the effective conductivity at the top of ice/snow (Jules coupling)
[9169]434      !
[9409]435      ! for control checks (ln_icediachk)
436      diag_trp_vi(:,:) = 0._wp   ;   diag_trp_vs(:,:) = 0._wp
437      diag_trp_ei(:,:) = 0._wp   ;   diag_trp_es(:,:) = 0._wp
438      diag_trp_sv(:,:) = 0._wp
439
[8586]440   END SUBROUTINE diag_set0
441
442#else
443   !!----------------------------------------------------------------------
[9570]444   !!   Default option           Dummy module         NO SI3 sea-ice model
[8586]445   !!----------------------------------------------------------------------
446CONTAINS
447   SUBROUTINE ice_stp ( kt, ksbc )     ! Dummy routine
448      INTEGER, INTENT(in) ::   kt, ksbc
449      WRITE(*,*) 'ice_stp: You should not have seen this print! error?', kt
450   END SUBROUTINE ice_stp
451   SUBROUTINE ice_init                 ! Dummy routine
452   END SUBROUTINE ice_init
453#endif
454
455   !!======================================================================
456END MODULE icestp
Note: See TracBrowser for help on using the repository browser.