New URL for NEMO forge!   http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.
nemogcm.F90 in branches/2016/dev_r6409_SIMPLIF_2_usrdef/NEMOGCM/NEMO/OFF_SRC – NEMO

source: branches/2016/dev_r6409_SIMPLIF_2_usrdef/NEMOGCM/NEMO/OFF_SRC/nemogcm.F90 @ 6596

Last change on this file since 6596 was 6596, checked in by gm, 8 years ago

#1692 - branch SIMPLIF_2_usrdef: remove from namcfg and namdom many obsolete variables ; remove izoom/jzoom option

  • Property svn:keywords set to Id
File size: 30.9 KB
Line 
1MODULE nemogcm
2   !!======================================================================
3   !!                       ***  MODULE nemogcm   ***
4   !! Off-line Ocean   : passive tracer evolution, dynamics read in files
5   !!======================================================================
6   !! History :  3.3  ! 2010-05  (C. Ethe)  Full reorganization of the off-line: phasing with the on-line
7   !!            4.0  ! 2011-01  (C. Ethe, A. R. Porter, STFC Daresbury) dynamical allocation
8   !!----------------------------------------------------------------------
9
10   !!----------------------------------------------------------------------
11   !!   nemo_gcm        : off-line: solve ocean tracer only
12   !!   nemo_init       : initialization of the nemo model
13   !!   nemo_ctl        : initialisation of algorithm flag
14   !!   nemo_closefile  : close remaining files
15   !!----------------------------------------------------------------------
16   USE dom_oce         ! ocean space domain variables
17   USE oce             ! dynamics and tracers variables
18   USE c1d             ! 1D configuration
19   USE domcfg          ! domain configuration               (dom_cfg routine)
20   USE domain          ! domain initialization from coordinate & bathymetry (dom_init routine)
21   USE domrea          ! domain initialization from mesh_mask            (dom_init routine)
22   USE eosbn2          ! equation of state            (eos bn2 routine)
23   !              ! ocean physics
24   USE ldftra          ! lateral diffusivity setting    (ldf_tra_init routine)
25   USE ldfslp          ! slopes of neutral surfaces     (ldf_slp_init routine)
26   USE traqsr          ! solar radiation penetration    (tra_qsr_init routine)
27   USE trabbl          ! bottom boundary layer          (tra_bbl_init routine)
28   USE traldf          ! lateral physics                (tra_ldf_init routine)
29   USE zdfini          ! vertical physics: initialization
30   USE sbcmod          ! surface boundary condition       (sbc_init     routine)
31   USE phycst          ! physical constant                  (par_cst routine)
32   USE dtadyn          ! Lecture and Interpolation of the dynamical fields
33   USE trcini          ! Initilization of the passive tracers
34   USE daymod          ! calendar                         (day     routine)
35   USE trcstp          ! passive tracer time-stepping      (trc_stp routine)
36   USE dtadyn          ! Lecture and interpolation of the dynamical fields
37   !              ! I/O & MPP
38   USE iom             ! I/O library
39   USE in_out_manager  ! I/O manager
40   USE mppini          ! shared/distributed memory setting (mpp_init routine)
41   USE lib_mpp         ! distributed memory computing
42#if defined key_iomput
43   USE xios
44#endif
45   USE prtctl          ! Print control                    (prt_ctl_init routine)
46   USE timing          ! Timing
47   USE lib_fortran     ! Fortran utilities (allows no signed zero when 'key_nosignedzero' defined)
48   USE lbcnfd, ONLY: isendto, nsndto, nfsloop, nfeloop ! Setup of north fold exchanges
49
50   USE trc
51   USE trcnam
52   USE trcrst
53   USE diaptr         ! Need to initialise this as some variables are used in if statements later
54   USE sbc_oce, ONLY: ln_rnf
55   USE sbcrnf
56
57   IMPLICIT NONE
58   PRIVATE
59   
60   PUBLIC   nemo_gcm   ! called by nemo.F90
61
62   CHARACTER (len=64) ::   cform_aaa="( /, 'AAAAAAAA', / ) "   ! flag for output listing
63
64   !!----------------------------------------------------------------------
65   !! NEMO/OFF 3.3 , NEMO Consortium (2010)
66   !! $Id$
67   !! Software governed by the CeCILL licence     (NEMOGCM/NEMO_CeCILL.txt)
68   !!----------------------------------------------------------------------
69CONTAINS
70
71   SUBROUTINE nemo_gcm
72      !!----------------------------------------------------------------------
73      !!                     ***  ROUTINE nemo_gcm  ***
74      !!
75      !! ** Purpose :   nemo solves the primitive equations on an orthogonal
76      !!      curvilinear mesh on the sphere.
77      !!
78      !! ** Method  : - model general initialization
79      !!              - launch the time-stepping (dta_dyn and trc_stp)
80      !!              - finalize the run by closing files and communications
81      !!
82      !! References : Madec, Delecluse,Imbard, and Levy, 1997:  internal report, IPSL.
83      !!              Madec, 2008, internal report, IPSL.
84      !!----------------------------------------------------------------------
85      INTEGER :: istp, indic       ! time step index
86      !!----------------------------------------------------------------------
87
88      CALL nemo_init  ! Initializations
89
90      ! check that all process are still there... If some process have an error,
91      ! they will never enter in step and other processes will wait until the end of the cpu time!
92      IF( lk_mpp )   CALL mpp_max( nstop )
93
94      !                            !-----------------------!
95      !                            !==   time stepping   ==!
96      !                            !-----------------------!
97      istp = nit000
98      !
99      ! Initialize arrays of runoffs structures and read data from the namelist
100      IF ( ln_rnf ) CALL sbc_rnf(istp)
101      !
102      CALL iom_init( cxios_context )            ! iom_put initialization (must be done after nemo_init for AGRIF+XIOS+OASIS)
103      !
104      DO WHILE ( istp <= nitend .AND. nstop == 0 )    ! time stepping
105         !
106         IF( istp /= nit000 )   CALL day      ( istp )         ! Calendar (day was already called at nit000 in day_init)
107                                CALL iom_setkt( istp - nit000 + 1, "nemo" )   ! say to iom that we are at time step kstp
108                                CALL dta_dyn  ( istp )         ! Interpolation of the dynamical fields
109                                CALL trc_stp  ( istp )         ! time-stepping
110                                CALL stp_ctl  ( istp, indic )  ! Time loop: control and print
111         istp = istp + 1
112         IF( lk_mpp )   CALL mpp_max( nstop )
113      END DO
114#if defined key_iomput
115      CALL iom_context_finalize( cxios_context ) ! needed for XIOS+AGRIF
116#endif
117
118      !                            !------------------------!
119      !                            !==  finalize the run  ==!
120      !                            !------------------------!
121      IF(lwp) WRITE(numout,cform_aaa)                 ! Flag AAAAAAA
122
123      IF( nstop /= 0 .AND. lwp ) THEN                 ! error print
124         WRITE(numout,cform_err)
125         WRITE(numout,*) nstop, ' error have been found'
126      ENDIF
127      !
128      IF( nn_timing == 1 )   CALL timing_finalize
129      !
130      CALL nemo_closefile
131      !
132# if defined key_iomput
133      CALL xios_finalize             ! end mpp communications
134# else
135      IF( lk_mpp )   CALL mppstop       ! end mpp communications
136# endif
137      !
138   END SUBROUTINE nemo_gcm
139
140
141   SUBROUTINE nemo_init
142      !!----------------------------------------------------------------------
143      !!                     ***  ROUTINE nemo_init ***
144      !!
145      !! ** Purpose :   initialization of the nemo model in off-line mode
146      !!----------------------------------------------------------------------
147      INTEGER ::   ji            ! dummy loop indices
148      INTEGER ::   ilocal_comm   ! local integer
149      INTEGER ::   ios
150      LOGICAL ::   llexist
151      CHARACTER(len=80), DIMENSION(16) ::   cltxt
152      !!
153      NAMELIST/namctl/ ln_ctl  , nn_print, nn_ictls, nn_ictle,   &
154         &             nn_isplt, nn_jsplt, nn_jctls, nn_jctle,   &
155         &             nn_bench, nn_timing, nn_diacfl
156      NAMELIST/namcfg/ cp_cfg, cp_cfz, jp_cfg, jpidta, jpjdta, jpkdta, jpiglo, jpjglo, &
157         &             jperio, ln_use_jattr
158      !!----------------------------------------------------------------------
159      cltxt = ''
160      cxios_context = 'nemo'
161      !
162      !                             ! Open reference namelist and configuration namelist files
163      CALL ctl_opn( numnam_ref, 'namelist_ref', 'OLD', 'FORMATTED', 'SEQUENTIAL', -1, 6, .FALSE. )
164      CALL ctl_opn( numnam_cfg, 'namelist_cfg', 'OLD', 'FORMATTED', 'SEQUENTIAL', -1, 6, .FALSE. )
165      !
166      REWIND( numnam_ref )              ! Namelist namctl in reference namelist : Control prints & Benchmark
167      READ  ( numnam_ref, namctl, IOSTAT = ios, ERR = 901 )
168901   IF( ios /= 0 ) CALL ctl_nam ( ios , 'namctl in reference namelist', .TRUE. )
169
170      REWIND( numnam_cfg )              ! Namelist namctl in confguration namelist : Control prints & Benchmark
171      READ  ( numnam_cfg, namctl, IOSTAT = ios, ERR = 902 )
172902   IF( ios /= 0 ) CALL ctl_nam ( ios , 'namctl in configuration namelist', .TRUE. )
173
174      !
175      REWIND( numnam_ref )              ! Namelist namcfg in reference namelist : Control prints & Benchmark
176      READ  ( numnam_ref, namcfg, IOSTAT = ios, ERR = 903 )
177903   IF( ios /= 0 ) CALL ctl_nam ( ios , 'namcfg in reference namelist', .TRUE. )
178
179      REWIND( numnam_cfg )              ! Namelist namcfg in confguration namelist : Control prints & Benchmark
180      READ  ( numnam_cfg, namcfg, IOSTAT = ios, ERR = 904 )
181904   IF( ios /= 0 ) CALL ctl_nam ( ios , 'namcfg in configuration namelist', .TRUE. )   
182
183      !
184      !                             !--------------------------------------------!
185      !                             !  set communicator & select the local node  !
186      !                             !  NB: mynode also opens output.namelist.dyn !
187      !                             !      on unit number numond on first proc   !
188      !                             !--------------------------------------------!
189#if defined key_iomput
190      CALL  xios_initialize( "for_xios_mpi_id",return_comm=ilocal_comm )
191      narea = mynode( cltxt, 'output.namelist.dyn', numnam_ref, numnam_cfg, numond , nstop, ilocal_comm )   ! Nodes selection
192#else
193      ilocal_comm = 0
194      narea = mynode( cltxt, 'output.namelist.dyn', numnam_ref, numnam_cfg, numond , nstop )                ! Nodes selection (control print return in cltxt)
195#endif
196
197      narea = narea + 1                       ! mynode return the rank of proc (0 --> jpnij -1 )
198
199      lwm = (narea == 1)                      ! control of output namelists
200      lwp = (narea == 1) .OR. ln_ctl          ! control of all listing output print
201
202      IF(lwm) THEN
203         ! write merged namelists from earlier to output namelist now that the
204         ! file has been opened in call to mynode. nammpp has already been
205         ! written in mynode (if lk_mpp_mpi)
206         WRITE( numond, namctl )
207         WRITE( numond, namcfg )
208      ENDIF
209
210      ! If dimensions of processor grid weren't specified in the namelist file
211      ! then we calculate them here now that we have our communicator size
212      IF( (jpni < 1) .OR. (jpnj < 1) )THEN
213#if   defined key_mpp_mpi
214         CALL nemo_partition(mppsize)
215#else
216         jpni = 1
217         jpnj = 1
218         jpnij = jpni*jpnj
219#endif
220      END IF
221
222      ! Calculate domain dimensions given calculated jpni and jpnj
223      ! This used to be done in par_oce.F90 when they were parameters rather
224      ! than variables
225      jpi = ( jpiglo-2*jpreci + (jpni-1) ) / jpni + 2*jpreci   ! first  dim.
226      jpj = ( jpjglo-2*jprecj + (jpnj-1) ) / jpnj + 2*jprecj   ! second dim.
227      jpk = jpkdta                                             ! third dim
228      jpim1 = jpi-1                                            ! inner domain indices
229      jpjm1 = jpj-1                                            !   "           "
230      jpkm1 = jpk-1                                            !   "           "
231      jpij  = jpi*jpj                                          !  jpi x j
232
233
234      IF(lwp) THEN                            ! open listing units
235         !
236         CALL ctl_opn( numout, 'ocean.output', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, 6, .FALSE., narea )
237         !
238         WRITE(numout,*)
239         WRITE(numout,*) '   CNRS - NERC - Met OFFICE - MERCATOR-ocean - INGV - CMCC'
240         WRITE(numout,*) '                       NEMO team'
241         WRITE(numout,*) '            Ocean General Circulation Model'
242         WRITE(numout,*) '                  version 3.6  (2015) '
243         WRITE(numout,*)
244         WRITE(numout,*)
245         DO ji = 1, SIZE(cltxt) 
246            IF( TRIM(cltxt(ji)) /= '' )   WRITE(numout,*) cltxt(ji)      ! control print of mynode
247         END DO
248         WRITE(numout,cform_aaa)                                         ! Flag AAAAAAA
249         !
250      ENDIF
251
252      ! Now we know the dimensions of the grid and numout has been set we can
253      ! allocate arrays
254      CALL nemo_alloc()
255
256      !                             !--------------------------------!
257      !                             !  Model general initialization  !
258      !                             !--------------------------------!
259
260      CALL nemo_ctl                           ! Control prints & Benchmark
261
262      !                                      ! Domain decomposition
263      IF( jpni*jpnj == jpnij ) THEN   ;   CALL mpp_init      ! standard cutting out
264      ELSE                            ;   CALL mpp_init2     ! eliminate land processors
265      ENDIF
266      !
267      IF( nn_timing == 1 )  CALL timing_init
268      !
269
270      !                                      ! General initialization
271      IF( nn_timing == 1 )  CALL timing_start( 'nemo_init')
272      !
273                            CALL     phy_cst    ! Physical constants
274                            CALL     eos_init   ! Equation of state
275      IF( lk_c1d        )   CALL     c1d_init   ! 1D column configuration
276                            CALL     dom_cfg    ! Domain configuration
277      !
278      INQUIRE( FILE='coordinates.nc', EXIST = llexist )   ! Check if coordinate file exist
279      !
280      IF( llexist )  THEN  ;  CALL  dom_init   !  compute the grid from coordinates and bathymetry
281      ELSE                 ;  CALL  dom_rea    !  read grid from the meskmask
282      ENDIF
283                            CALL  istate_init   ! ocean initial state (Dynamics and tracers)
284
285      IF( ln_nnogather )    CALL nemo_northcomms   ! Initialise the northfold neighbour lists (must be done after the masks are defined)
286
287      IF( ln_ctl        )   CALL prt_ctl_init   ! Print control
288
289                            CALL     sbc_init   ! Forcings : surface module
290
291                            CALL ldf_tra_init   ! Lateral ocean tracer physics
292                            CALL ldf_eiv_init   ! Eddy induced velocity param
293                            CALL tra_ldf_init   ! lateral mixing
294      IF( l_ldfslp )        CALL ldf_slp_init   ! slope of lateral mixing
295
296                            CALL tra_qsr_init   ! penetrative solar radiation qsr
297      IF( lk_trabbl     )   CALL tra_bbl_init   ! advective (and/or diffusive) bottom boundary layer scheme
298
299                            CALL trc_nam_run    ! Needed to get restart parameters for passive tracers
300                            CALL trc_rst_cal( nit000, 'READ' )   ! calendar
301                            CALL dta_dyn_init   ! Initialization for the dynamics
302
303                            CALL     trc_init   ! Passive tracers initialization
304                            CALL dia_ptr_init   ! Initialise diaptr as some variables are used
305      !                                         ! in various advection and diffusion routines
306      IF(lwp) WRITE(numout,cform_aaa)           ! Flag AAAAAAA
307      !
308      IF( nn_timing == 1 )  CALL timing_stop( 'nemo_init')
309      !
310   END SUBROUTINE nemo_init
311
312
313   SUBROUTINE nemo_ctl
314      !!----------------------------------------------------------------------
315      !!                     ***  ROUTINE nemo_ctl  ***
316      !!
317      !! ** Purpose :   control print setting
318      !!
319      !! ** Method  : - print namctl information and check some consistencies
320      !!----------------------------------------------------------------------
321      !
322      IF(lwp) THEN                  ! Parameter print
323         WRITE(numout,*)
324         WRITE(numout,*) 'nemo_flg: Control prints & Benchmark'
325         WRITE(numout,*) '~~~~~~~ '
326         WRITE(numout,*) '   Namelist namctl'
327         WRITE(numout,*) '      run control (for debugging)     ln_ctl     = ', ln_ctl
328         WRITE(numout,*) '      level of print                  nn_print   = ', nn_print
329         WRITE(numout,*) '      Start i indice for SUM control  nn_ictls   = ', nn_ictls
330         WRITE(numout,*) '      End i indice for SUM control    nn_ictle   = ', nn_ictle
331         WRITE(numout,*) '      Start j indice for SUM control  nn_jctls   = ', nn_jctls
332         WRITE(numout,*) '      End j indice for SUM control    nn_jctle   = ', nn_jctle
333         WRITE(numout,*) '      number of proc. following i     nn_isplt   = ', nn_isplt
334         WRITE(numout,*) '      number of proc. following j     nn_jsplt   = ', nn_jsplt
335         WRITE(numout,*) '      benchmark parameter (0/1)       nn_bench   = ', nn_bench
336      ENDIF
337      !
338      nprint    = nn_print          ! convert DOCTOR namelist names into OLD names
339      nictls    = nn_ictls
340      nictle    = nn_ictle
341      njctls    = nn_jctls
342      njctle    = nn_jctle
343      isplt     = nn_isplt
344      jsplt     = nn_jsplt
345      nbench    = nn_bench
346     IF(lwp) THEN                  ! control print
347         WRITE(numout,*)
348         WRITE(numout,*) 'namcfg  : configuration initialization through namelist read'
349         WRITE(numout,*) '~~~~~~~ '
350         WRITE(numout,*) '   Namelist namcfg'
351         WRITE(numout,*) '      configuration name              cp_cfg      = ', TRIM(cp_cfg)
352         WRITE(numout,*) '      configuration resolution        jp_cfg      = ', jp_cfg
353         WRITE(numout,*) '      lateral cond. type (between 0 and 6) jperio = ', jperio   
354         WRITE(numout,*) '      use file attribute if exists as i/p j-start ln_use_jattr = ', ln_use_jattr
355      ENDIF
356      !                             ! Parameter control
357      !
358      IF( ln_ctl ) THEN                 ! sub-domain area indices for the control prints
359         IF( lk_mpp ) THEN
360            isplt = jpni   ;   jsplt = jpnj   ;   ijsplt = jpni*jpnj   ! the domain is forced to the real splitted domain
361         ELSE
362            IF( isplt == 1 .AND. jsplt == 1  ) THEN
363               CALL ctl_warn( ' - isplt & jsplt are equal to 1',   &
364                  &           ' - the print control will be done over the whole domain' )
365            ENDIF
366            ijsplt = isplt * jsplt            ! total number of processors ijsplt
367         ENDIF
368         IF(lwp) WRITE(numout,*)'          - The total number of processors over which the'
369         IF(lwp) WRITE(numout,*)'            print control will be done is ijsplt : ', ijsplt
370         !
371         !                              ! indices used for the SUM control
372         IF( nictls+nictle+njctls+njctle == 0 )   THEN    ! print control done over the default area
373            lsp_area = .FALSE.
374         ELSE                                             ! print control done over a specific  area
375            lsp_area = .TRUE.
376            IF( nictls < 1 .OR. nictls > jpiglo )   THEN
377               CALL ctl_warn( '          - nictls must be 1<=nictls>=jpiglo, it is forced to 1' )
378               nictls = 1
379            ENDIF
380            IF( nictle < 1 .OR. nictle > jpiglo )   THEN
381               CALL ctl_warn( '          - nictle must be 1<=nictle>=jpiglo, it is forced to jpiglo' )
382               nictle = jpiglo
383            ENDIF
384            IF( njctls < 1 .OR. njctls > jpjglo )   THEN
385               CALL ctl_warn( '          - njctls must be 1<=njctls>=jpjglo, it is forced to 1' )
386               njctls = 1
387            ENDIF
388            IF( njctle < 1 .OR. njctle > jpjglo )   THEN
389               CALL ctl_warn( '          - njctle must be 1<=njctle>=jpjglo, it is forced to jpjglo' )
390               njctle = jpjglo
391            ENDIF
392         ENDIF
393      ENDIF
394      !
395      IF( lk_c1d .AND. .NOT.lk_iomput )   CALL ctl_stop( 'nemo_ctl: The 1D configuration must be used ',   &
396         &                                               'with the IOM Input/Output manager. '        ,   &
397         &                                               'Compile with key_iomput enabled' )
398      !
399      IF( 1_wp /= SIGN(1._wp,-0._wp)  )   CALL ctl_stop( 'nemo_ctl: The intrinsec SIGN function follows ',  &
400         &                                               'f2003 standard. '                              ,  &
401         &                                               'Compile with key_nosignedzero enabled' )
402      !
403   END SUBROUTINE nemo_ctl
404
405
406   SUBROUTINE nemo_closefile
407      !!----------------------------------------------------------------------
408      !!                     ***  ROUTINE nemo_closefile  ***
409      !!
410      !! ** Purpose :   Close the files
411      !!----------------------------------------------------------------------
412      !
413      IF ( lk_mpp ) CALL mppsync
414      !
415      CALL iom_close                                 ! close all input/output files managed by iom_*
416      !
417      IF( numstp     /= -1 )   CLOSE( numstp     )   ! time-step file
418      IF( numnam_ref /= -1 )   CLOSE( numnam_ref )   ! oce reference namelist
419      IF( numnam_cfg /= -1 )   CLOSE( numnam_cfg )   ! oce configuration namelist
420      IF( numout     /=  6 )   CLOSE( numout     )   ! standard model output file
421      numout = 6                                     ! redefine numout in case it is used after this point...
422      !
423   END SUBROUTINE nemo_closefile
424
425
426   SUBROUTINE nemo_alloc
427      !!----------------------------------------------------------------------
428      !!                     ***  ROUTINE nemo_alloc  ***
429      !!
430      !! ** Purpose :   Allocate all the dynamic arrays of the OPA modules
431      !!
432      !! ** Method  :
433      !!----------------------------------------------------------------------
434      USE diawri,       ONLY: dia_wri_alloc
435      USE dom_oce,      ONLY: dom_oce_alloc
436      USE zdf_oce,      ONLY: zdf_oce_alloc
437      USE trc_oce,      ONLY: trc_oce_alloc
438      !
439      INTEGER :: ierr
440      !!----------------------------------------------------------------------
441      !
442      ierr =        oce_alloc       ()          ! ocean
443      ierr = ierr + dia_wri_alloc   ()
444      ierr = ierr + dom_oce_alloc   ()          ! ocean domain
445      ierr = ierr + zdf_oce_alloc   ()          ! ocean vertical physics
446      !
447      ierr = ierr + trc_oce_alloc   ()          ! shared TRC / TRA arrays
448      !
449      IF( lk_mpp    )   CALL mpp_sum( ierr )
450      IF( ierr /= 0 )   CALL ctl_stop( 'STOP', 'nemo_alloc: unable to allocate standard ocean arrays' )
451      !
452   END SUBROUTINE nemo_alloc
453
454
455   SUBROUTINE nemo_partition( num_pes )
456      !!----------------------------------------------------------------------
457      !!                 ***  ROUTINE nemo_partition  ***
458      !!
459      !! ** Purpose :   
460      !!
461      !! ** Method  :
462      !!----------------------------------------------------------------------
463      INTEGER, INTENT(in) :: num_pes ! The number of MPI processes we have
464      !
465      INTEGER, PARAMETER :: nfactmax = 20
466      INTEGER :: nfact ! The no. of factors returned
467      INTEGER :: ierr  ! Error flag
468      INTEGER :: ji
469      INTEGER :: idiff, mindiff, imin ! For choosing pair of factors that are closest in value
470      INTEGER, DIMENSION(nfactmax) :: ifact ! Array of factors
471      !!----------------------------------------------------------------------
472
473      ierr = 0
474
475      CALL factorise( ifact, nfactmax, nfact, num_pes, ierr )
476
477      IF( nfact <= 1 ) THEN
478         WRITE (numout, *) 'WARNING: factorisation of number of PEs failed'
479         WRITE (numout, *) '       : using grid of ',num_pes,' x 1'
480         jpnj = 1
481         jpni = num_pes
482      ELSE
483         ! Search through factors for the pair that are closest in value
484         mindiff = 1000000
485         imin    = 1
486         DO ji = 1, nfact-1, 2
487            idiff = ABS( ifact(ji) - ifact(ji+1) )
488            IF( idiff < mindiff ) THEN
489               mindiff = idiff
490               imin = ji
491            ENDIF
492         END DO
493         jpnj = ifact(imin)
494         jpni = ifact(imin + 1)
495      ENDIF
496      !
497      jpnij = jpni*jpnj
498      !
499   END SUBROUTINE nemo_partition
500
501
502   SUBROUTINE factorise( kfax, kmaxfax, knfax, kn, kerr )
503      !!----------------------------------------------------------------------
504      !!                     ***  ROUTINE factorise  ***
505      !!
506      !! ** Purpose :   return the prime factors of n.
507      !!                knfax factors are returned in array kfax which is of
508      !!                maximum dimension kmaxfax.
509      !! ** Method  :
510      !!----------------------------------------------------------------------
511      INTEGER                    , INTENT(in   ) ::   kn, kmaxfax
512      INTEGER                    , INTENT(  out) ::   kerr, knfax
513      INTEGER, DIMENSION(kmaxfax), INTENT(  out) ::   kfax
514      !
515      INTEGER :: ifac, jl, inu
516      INTEGER, PARAMETER :: ntest = 14
517      INTEGER :: ilfax(ntest)
518      !
519      ! lfax contains the set of allowed factors.
520      data (ilfax(jl),jl=1,ntest) / 16384, 8192, 4096, 2048, 1024, 512, 256,  &
521         &                            128,   64,   32,   16,    8,   4,   2  /
522      !!----------------------------------------------------------------------
523
524      ! Clear the error flag and initialise output vars
525      kerr = 0
526      kfax = 1
527      knfax = 0
528
529      ! Find the factors of n.
530      IF( kn == 1 )   GOTO 20
531
532      ! nu holds the unfactorised part of the number.
533      ! knfax holds the number of factors found.
534      ! l points to the allowed factor list.
535      ! ifac holds the current factor.
536
537      inu   = kn
538      knfax = 0
539
540      DO jl = ntest, 1, -1
541         !
542         ifac = ilfax(jl)
543         IF( ifac > inu )   CYCLE
544
545         ! Test whether the factor will divide.
546
547         IF( MOD(inu,ifac) == 0 ) THEN
548            !
549            knfax = knfax + 1            ! Add the factor to the list
550            IF( knfax > kmaxfax ) THEN
551               kerr = 6
552               write (*,*) 'FACTOR: insufficient space in factor array ', knfax
553               return
554            ENDIF
555            kfax(knfax) = ifac
556            ! Store the other factor that goes with this one
557            knfax = knfax + 1
558            kfax(knfax) = inu / ifac
559            !WRITE (*,*) 'ARPDBG, factors ',knfax-1,' & ',knfax,' are ', kfax(knfax-1),' and ',kfax(knfax)
560         ENDIF
561         !
562      END DO
563
564   20 CONTINUE      ! Label 20 is the exit point from the factor search loop.
565      !
566   END SUBROUTINE factorise
567
568#if defined key_mpp_mpi
569   SUBROUTINE nemo_northcomms
570      !!======================================================================
571      !!                     ***  ROUTINE  nemo_northcomms  ***
572      !! nemo_northcomms    :  Setup for north fold exchanges with explicit
573      !!                       point-to-point messaging
574      !!=====================================================================
575      !!----------------------------------------------------------------------
576      !!
577      !! ** Purpose :   Initialization of the northern neighbours lists.
578      !!----------------------------------------------------------------------
579      !!    1.0  ! 2011-10  (A. C. Coward, NOCS & J. Donners, PRACE)
580      !!    2.0  ! 2013-06 Setup avoiding MPI communication (I. Epicoco, S.
581      !Mocavero, CMCC)
582      !!----------------------------------------------------------------------
583
584      INTEGER  ::   sxM, dxM, sxT, dxT, jn
585      INTEGER  ::   njmppmax
586
587      njmppmax = MAXVAL( njmppt )
588
589      !initializes the north-fold communication variables
590      isendto(:) = 0
591      nsndto = 0
592
593      !if I am a process in the north
594      IF ( njmpp == njmppmax ) THEN
595          !sxM is the first point (in the global domain) needed to compute the
596          !north-fold for the current process
597          sxM = jpiglo - nimppt(narea) - nlcit(narea) + 1
598          !dxM is the last point (in the global domain) needed to compute the
599          !north-fold for the current process
600          dxM = jpiglo - nimppt(narea) + 2
601
602          !loop over the other north-fold processes to find the processes
603          !managing the points belonging to the sxT-dxT range
604
605          DO jn = 1, jpni
606                !sxT is the first point (in the global domain) of the jn
607                !process
608                sxT = nfiimpp(jn, jpnj)
609                !dxT is the last point (in the global domain) of the jn
610                !process
611                dxT = nfiimpp(jn, jpnj) + nfilcit(jn, jpnj) - 1
612                IF ((sxM .gt. sxT) .AND. (sxM .lt. dxT)) THEN
613                   nsndto = nsndto + 1
614                     isendto(nsndto) = jn
615                ELSEIF ((sxM .le. sxT) .AND. (dxM .ge. dxT)) THEN
616                   nsndto = nsndto + 1
617                     isendto(nsndto) = jn
618                ELSEIF ((dxM .lt. dxT) .AND. (sxT .lt. dxM)) THEN
619                   nsndto = nsndto + 1
620                     isendto(nsndto) = jn
621                END IF
622          END DO
623          nfsloop = 1
624          nfeloop = nlci
625          DO jn = 2,jpni-1
626           IF(nfipproc(jn,jpnj) .eq. (narea - 1)) THEN
627              IF (nfipproc(jn - 1 ,jpnj) .eq. -1) THEN
628                 nfsloop = nldi
629              ENDIF
630              IF (nfipproc(jn + 1,jpnj) .eq. -1) THEN
631                 nfeloop = nlei
632              ENDIF
633           ENDIF
634        END DO
635
636      ENDIF
637      l_north_nogather = .TRUE.
638   END SUBROUTINE nemo_northcomms
639#else
640   SUBROUTINE nemo_northcomms      ! Dummy routine
641      WRITE(*,*) 'nemo_northcomms: You should not have seen this print! error?'
642   END SUBROUTINE nemo_northcomms
643#endif
644
645   SUBROUTINE istate_init
646      !!----------------------------------------------------------------------
647      !!                   ***  ROUTINE istate_init  ***
648      !!
649      !! ** Purpose :   Initialization to zero of the dynamics and tracers.
650      !!----------------------------------------------------------------------
651      !
652      !     now fields         !     after fields      !
653      un   (:,:,:)   = 0._wp   ;   ua(:,:,:) = 0._wp   !
654      vn   (:,:,:)   = 0._wp   ;   va(:,:,:) = 0._wp   !
655      wn   (:,:,:)   = 0._wp   !                       !
656      hdivn(:,:,:)   = 0._wp   !                       !
657      tsn  (:,:,:,:) = 0._wp   !                       !
658      !
659      rhd  (:,:,:) = 0.e0
660      rhop (:,:,:) = 0.e0
661      rn2  (:,:,:) = 0.e0
662      !
663   END SUBROUTINE istate_init
664
665   SUBROUTINE stp_ctl( kt, kindic )
666      !!----------------------------------------------------------------------
667      !!                    ***  ROUTINE stp_ctl  ***
668      !!
669      !! ** Purpose :   Control the run
670      !!
671      !! ** Method  : - Save the time step in numstp
672      !!
673      !! ** Actions :   'time.step' file containing the last ocean time-step
674      !!----------------------------------------------------------------------
675      INTEGER, INTENT(in   ) ::   kt      ! ocean time-step index
676      INTEGER, INTENT(inout) ::   kindic  ! indicator of solver convergence
677      !!----------------------------------------------------------------------
678      !
679      IF( kt == nit000 .AND. lwp ) THEN
680         WRITE(numout,*)
681         WRITE(numout,*) 'stp_ctl : time-stepping control'
682         WRITE(numout,*) '~~~~~~~'
683         ! open time.step file
684         CALL ctl_opn( numstp, 'time.step', 'REPLACE', 'FORMATTED', 'SEQUENTIAL', -1, numout, lwp, narea )
685      ENDIF
686      !
687      IF(lwp) WRITE ( numstp, '(1x, i8)' )   kt      !* save the current time step in numstp
688      IF(lwp) REWIND( numstp )                       ! --------------------------
689      !
690   END SUBROUTINE stp_ctl
691   !!======================================================================
692END MODULE nemogcm
Note: See TracBrowser for help on using the repository browser.