New URL for NEMO forge!   http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.
sbcmod.F90 in branches/UKMO/r5936_INGV1_WAVE-coupling/NEMOGCM/NEMO/OPA_SRC/SBC – NEMO

source: branches/UKMO/r5936_INGV1_WAVE-coupling/NEMOGCM/NEMO/OPA_SRC/SBC/sbcmod.F90 @ 7167

Last change on this file since 7167 was 7167, checked in by jcastill, 7 years ago

Changes as in branch 2015/dev_r5936_INGV1_WAVE at r7078

File size: 30.4 KB
Line 
1MODULE sbcmod
2   !!======================================================================
3   !!                       ***  MODULE  sbcmod  ***
4   !! Surface module :  provide to the ocean its surface boundary condition
5   !!======================================================================
6   !! History :  3.0  ! 2006-07  (G. Madec)  Original code
7   !!            3.1  ! 2008-08  (S. Masson, A. Caubel, E. Maisonnave, G. Madec) coupled interface
8   !!            3.3  ! 2010-04  (M. Leclair, G. Madec)  Forcing averaged over 2 time steps
9   !!            3.3  ! 2010-10  (S. Masson)  add diurnal cycle
10   !!            3.3  ! 2010-09  (D. Storkey) add ice boundary conditions (BDY)
11   !!             -   ! 2010-11  (G. Madec) ice-ocean stress always computed at each ocean time-step
12   !!             -   ! 2010-10  (J. Chanut, C. Bricaud, G. Madec)  add the surface pressure forcing
13   !!            3.4  ! 2011-11  (C. Harris) CICE added as an option
14   !!            3.5  ! 2012-11  (A. Coward, G. Madec) Rethink of heat, mass and salt surface fluxes
15   !!            3.6  ! 2014-11  (P. Mathiot, C. Harris) add ice shelves melting                   
16   !!----------------------------------------------------------------------
17
18   !!----------------------------------------------------------------------
19   !!   sbc_init       : read namsbc namelist
20   !!   sbc            : surface ocean momentum, heat and freshwater boundary conditions
21   !!----------------------------------------------------------------------
22   USE oce              ! ocean dynamics and tracers
23   USE dom_oce          ! ocean space and time domain
24   USE phycst           ! physical constants
25   USE sbc_oce          ! Surface boundary condition: ocean fields
26   USE trc_oce          ! shared ocean-passive tracers variables
27   USE sbc_ice          ! Surface boundary condition: ice fields
28   USE sbcdcy           ! surface boundary condition: diurnal cycle
29   USE sbcssm           ! surface boundary condition: sea-surface mean variables
30   USE sbcana           ! surface boundary condition: analytical formulation
31   USE sbcflx           ! surface boundary condition: flux formulation
32   USE sbcblk_clio      ! surface boundary condition: bulk formulation : CLIO
33   USE sbcblk_core      ! surface boundary condition: bulk formulation : CORE
34   USE sbcblk_mfs       ! surface boundary condition: bulk formulation : MFS
35   USE sbcice_if        ! surface boundary condition: ice-if sea-ice model
36   USE sbcice_lim       ! surface boundary condition: LIM 3.0 sea-ice model
37   USE sbcice_lim_2     ! surface boundary condition: LIM 2.0 sea-ice model
38   USE sbcice_cice      ! surface boundary condition: CICE    sea-ice model
39   USE sbccpl           ! surface boundary condition: coupled florulation
40   USE cpl_oasis3       ! OASIS routines for coupling
41   USE sbcssr           ! surface boundary condition: sea surface restoring
42   USE sbcrnf           ! surface boundary condition: runoffs
43   USE sbcisf           ! surface boundary condition: ice shelf
44   USE sbcfwb           ! surface boundary condition: freshwater budget
45   USE closea           ! closed sea
46   USE icbstp           ! Icebergs!
47
48   USE prtctl           ! Print control                    (prt_ctl routine)
49   USE iom              ! IOM library
50   USE in_out_manager   ! I/O manager
51   USE lib_mpp          ! MPP library
52   USE timing           ! Timing
53   USE sbcwave          ! Wave module
54   USE bdy_par          ! Require lk_bdy
55
56   IMPLICIT NONE
57   PRIVATE
58
59   PUBLIC   sbc        ! routine called by step.F90
60   PUBLIC   sbc_init   ! routine called by opa.F90
61   
62   INTEGER ::   nsbc   ! type of surface boundary condition (deduced from namsbc informations)
63     
64   !! * Substitutions
65#  include "domzgr_substitute.h90"
66   !!----------------------------------------------------------------------
67   !! NEMO/OPA 4.0 , NEMO-consortium (2011)
68   !! $Id$
69   !! Software governed by the CeCILL licence     (NEMOGCM/NEMO_CeCILL.txt)
70   !!----------------------------------------------------------------------
71CONTAINS
72
73   SUBROUTINE sbc_init
74      !!---------------------------------------------------------------------
75      !!                    ***  ROUTINE sbc_init ***
76      !!
77      !! ** Purpose :   Initialisation of the ocean surface boundary computation
78      !!
79      !! ** Method  :   Read the namsbc namelist and set derived parameters
80      !!                Call init routines for all other SBC modules that have one
81      !!
82      !! ** Action  : - read namsbc parameters
83      !!              - nsbc: type of sbc
84      !!----------------------------------------------------------------------
85      INTEGER ::   icpt   ! local integer
86      !!
87      NAMELIST/namsbc/ nn_fsbc   , ln_ana    , ln_flx, ln_blk_clio, ln_blk_core, ln_mixcpl,   &
88         &             ln_blk_mfs, ln_apr_dyn, nn_ice, nn_ice_embd, ln_dm2dc   , ln_rnf   ,   &
89         &             ln_ssr    , nn_isf    , nn_fwb, ln_cdgw    , ln_wave    , ln_sdw   ,   &
90         &             ln_tauoc  , ln_stcor  , nn_lsm, nn_limflx  , nn_components, ln_cpl 
91      INTEGER  ::   ios
92      INTEGER  ::   ierr, ierr0, ierr1, ierr2, ierr3, jpm
93      LOGICAL  ::   ll_purecpl
94      !!----------------------------------------------------------------------
95
96      IF(lwp) THEN
97         WRITE(numout,*)
98         WRITE(numout,*) 'sbc_init : surface boundary condition setting'
99         WRITE(numout,*) '~~~~~~~~ '
100      ENDIF
101
102      REWIND( numnam_ref )              ! Namelist namsbc in reference namelist : Surface boundary
103      READ  ( numnam_ref, namsbc, IOSTAT = ios, ERR = 901)
104901   IF( ios /= 0 ) CALL ctl_nam ( ios , 'namsbc in reference namelist', lwp )
105
106      REWIND( numnam_cfg )              ! Namelist namsbc in configuration namelist : Parameters of the run
107      READ  ( numnam_cfg, namsbc, IOSTAT = ios, ERR = 902 )
108902   IF( ios /= 0 ) CALL ctl_nam ( ios , 'namsbc in configuration namelist', lwp )
109      IF(lwm) WRITE ( numond, namsbc )
110
111      !                          ! overwrite namelist parameter using CPP key information
112      IF( Agrif_Root() ) THEN                ! AGRIF zoom
113        IF( lk_lim2 )   nn_ice      = 2
114        IF( lk_lim3 )   nn_ice      = 3
115        IF( lk_cice )   nn_ice      = 4
116      ENDIF
117      IF( cp_cfg == 'gyre' ) THEN            ! GYRE configuration
118          ln_ana      = .TRUE.   
119          nn_ice      =   0
120      ENDIF
121
122      IF(lwp) THEN               ! Control print
123         WRITE(numout,*) '        Namelist namsbc (partly overwritten with CPP key setting)'
124         WRITE(numout,*) '           frequency update of sbc (and ice)             nn_fsbc     = ', nn_fsbc
125         WRITE(numout,*) '           Type of sbc : '
126         WRITE(numout,*) '              analytical formulation                     ln_ana      = ', ln_ana
127         WRITE(numout,*) '              flux       formulation                     ln_flx      = ', ln_flx
128         WRITE(numout,*) '              CLIO bulk  formulation                     ln_blk_clio = ', ln_blk_clio
129         WRITE(numout,*) '              CORE bulk  formulation                     ln_blk_core = ', ln_blk_core
130         WRITE(numout,*) '              MFS  bulk  formulation                     ln_blk_mfs  = ', ln_blk_mfs
131         WRITE(numout,*) '              ocean-atmosphere coupled formulation       ln_cpl      = ', ln_cpl
132         WRITE(numout,*) '              forced-coupled mixed formulation           ln_mixcpl   = ', ln_mixcpl
133         WRITE(numout,*) '              OASIS coupling (with atm or sas)           lk_oasis    = ', lk_oasis
134         WRITE(numout,*) '              components of your executable            nn_components = ', nn_components
135         WRITE(numout,*) '              Multicategory heat flux formulation (LIM3) nn_limflx   = ', nn_limflx
136         WRITE(numout,*) '           Misc. options of sbc : '
137         WRITE(numout,*) '              Patm gradient added in ocean & ice Eqs.    ln_apr_dyn  = ', ln_apr_dyn
138         WRITE(numout,*) '              ice management in the sbc (=0/1/2/3)       nn_ice      = ', nn_ice 
139         WRITE(numout,*) '              ice-ocean embedded/levitating (=0/1/2)     nn_ice_embd = ', nn_ice_embd
140         WRITE(numout,*) '              daily mean to diurnal cycle qsr            ln_dm2dc    = ', ln_dm2dc 
141         WRITE(numout,*) '              runoff / runoff mouths                     ln_rnf      = ', ln_rnf
142         WRITE(numout,*) '              iceshelf formulation                       nn_isf      = ', nn_isf
143         WRITE(numout,*) '              Sea Surface Restoring on SST and/or SSS    ln_ssr      = ', ln_ssr
144         WRITE(numout,*) '              FreshWater Budget control  (=0/1/2)        nn_fwb      = ', nn_fwb
145         WRITE(numout,*) '              closed sea (=0/1) (set in namdom)          nn_closea   = ', nn_closea
146         WRITE(numout,*) '              n. of iterations if land-sea-mask applied  nn_lsm      = ', nn_lsm
147      ENDIF
148
149      ! LIM3 Multi-category heat flux formulation
150      SELECT CASE ( nn_limflx)
151      CASE ( -1 )
152         IF(lwp) WRITE(numout,*) '              Use of per-category fluxes (nn_limflx = -1) '
153      CASE ( 0  )
154         IF(lwp) WRITE(numout,*) '              Average per-category fluxes (nn_limflx = 0) ' 
155      CASE ( 1  )
156         IF(lwp) WRITE(numout,*) '              Average then redistribute per-category fluxes (nn_limflx = 1) '
157      CASE ( 2  )
158         IF(lwp) WRITE(numout,*) '              Redistribute a single flux over categories (nn_limflx = 2) '
159      END SELECT
160      !
161      IF ( nn_components /= jp_iam_nemo .AND. .NOT. lk_oasis )   &
162         &      CALL ctl_stop( 'STOP', 'sbc_init : OPA-SAS coupled via OASIS, but key_oasis3 disabled' )
163      IF ( nn_components == jp_iam_opa .AND. ln_cpl )   &
164         &      CALL ctl_stop( 'STOP', 'sbc_init : OPA-SAS coupled via OASIS, but ln_cpl = T in OPA' )
165      IF ( nn_components == jp_iam_opa .AND. ln_mixcpl )   &
166         &      CALL ctl_stop( 'STOP', 'sbc_init : OPA-SAS coupled via OASIS, but ln_mixcpl = T in OPA' )
167      IF ( ln_cpl .AND. .NOT. lk_oasis )    &
168         &      CALL ctl_stop( 'STOP', 'sbc_init : OASIS-coupled atmosphere model, but key_oasis3 disabled' )
169      IF( ln_mixcpl .AND. .NOT. lk_oasis )    &
170         &      CALL ctl_stop( 'the forced-coupled mixed mode (ln_mixcpl) requires the cpp key key_oasis3' )
171      IF( ln_mixcpl .AND. .NOT. ln_cpl )    &
172         &      CALL ctl_stop( 'the forced-coupled mixed mode (ln_mixcpl) requires ln_cpl = T' )
173      IF( ln_mixcpl .AND. nn_components /= jp_iam_nemo )    &
174         &      CALL ctl_stop( 'the forced-coupled mixed mode (ln_mixcpl) is not yet working with sas-opa coupling via oasis' )
175
176      !                              ! allocate sbc arrays
177      IF( sbc_oce_alloc() /= 0 )   CALL ctl_stop( 'sbc_init : unable to allocate sbc_oce arrays' )
178
179      !                          ! Checks:
180      IF( nn_isf .EQ. 0 ) THEN                      ! variable initialisation if no ice shelf
181         IF( sbc_isf_alloc() /= 0 )   CALL ctl_stop( 'sbc_init : unable to allocate sbc_isf arrays' )
182         fwfisf  (:,:)   = 0.0_wp ; fwfisf_b  (:,:)   = 0.0_wp
183         risf_tsc(:,:,:) = 0.0_wp ; risf_tsc_b(:,:,:) = 0.0_wp
184         rdivisf       = 0.0_wp
185      END IF
186      IF( nn_ice == 0 .AND. nn_components /= jp_iam_opa )   fr_i(:,:) = 0.e0 ! no ice in the domain, ice fraction is always zero
187
188      sfx(:,:) = 0.0_wp                            ! the salt flux due to freezing/melting will be computed (i.e. will be non-zero)
189                                                   ! only if sea-ice is present
190 
191      fmmflx(:,:) = 0.0_wp                        ! freezing-melting array initialisation
192     
193      taum(:,:) = 0.0_wp                           ! Initialise taum for use in gls in case of reduced restart
194
195      !                                            ! restartability   
196      IF( ( nn_ice == 2 .OR. nn_ice ==3 ) .AND. .NOT.( ln_blk_clio .OR. ln_blk_core .OR. ln_cpl ) )   &
197         &   CALL ctl_stop( 'LIM sea-ice model requires a bulk formulation or coupled configuration' )
198      IF( nn_ice == 4 .AND. .NOT.( ln_blk_core .OR. ln_cpl ) )   &
199         &   CALL ctl_stop( 'CICE sea-ice model requires ln_blk_core or ln_cpl' )
200      IF( nn_ice == 4 .AND. lk_agrif )   &
201         &   CALL ctl_stop( 'CICE sea-ice model not currently available with AGRIF' )
202      IF( ( nn_ice == 3 .OR. nn_ice == 4 ) .AND. nn_ice_embd == 0 )   &
203         &   CALL ctl_stop( 'LIM3 and CICE sea-ice models require nn_ice_embd = 1 or 2' )
204      IF( ( nn_ice /= 3 ) .AND. ( nn_limflx >= 0 ) )   &
205         &   WRITE(numout,*) 'The nn_limflx>=0 option has no effect if sea ice model is not LIM3'
206      IF( ( nn_ice == 3 ) .AND. ( ln_cpl ) .AND. ( ( nn_limflx == -1 ) .OR. ( nn_limflx == 1 ) ) )   &
207         &   CALL ctl_stop( 'The chosen nn_limflx for LIM3 in coupled mode must be 0 or 2' )
208      IF( ( nn_ice == 3 ) .AND. ( .NOT. ln_cpl ) .AND. ( nn_limflx == 2 ) )   &
209         &   CALL ctl_stop( 'The chosen nn_limflx for LIM3 in forced mode cannot be 2' )
210
211      IF( ln_dm2dc )   nday_qsr = -1   ! initialisation flag
212
213      IF( ln_dm2dc .AND. .NOT.( ln_flx .OR. ln_blk_core ) .AND. nn_components /= jp_iam_opa )   &
214         &   CALL ctl_stop( 'diurnal cycle into qsr field from daily values requires a flux or core-bulk formulation' )
215     
216      IF ( ln_wave ) THEN
217      !Activated wave module but neither drag nor stokes drift activated
218         IF ( .NOT.(ln_cdgw .OR. ln_sdw) )   THEN
219            CALL ctl_warn( 'Ask for wave coupling but nor drag coefficient (ln_cdgw=F) neither stokes drift activated (ln_sdw=F)' )
220      !drag coefficient read from wave model definable only with mfs bulk formulae and core
221         ELSEIF (ln_cdgw .AND. .NOT.(ln_blk_mfs .OR. ln_blk_core) )       THEN       
222             CALL ctl_stop( 'drag coefficient read from wave model definable only with mfs bulk formulae and core')
223         ENDIF
224      ELSE
225      IF ( ln_cdgw .OR. ln_sdw  )                                                           & 
226         &   CALL ctl_stop( 'Not Activated Wave Module (ln_wave=F) but asked coupling ',    &
227         &                  'with drag coefficient (ln_cdgw =T) or Stokes drift (ln_sdw=T) ')
228      ENDIF 
229      !                          ! Choice of the Surface Boudary Condition (set nsbc)
230      ll_purecpl = ln_cpl .AND. .NOT. ln_mixcpl
231      !
232      icpt = 0
233      IF( ln_ana          ) THEN   ;   nsbc = jp_ana     ; icpt = icpt + 1   ;   ENDIF       ! analytical           formulation
234      IF( ln_flx          ) THEN   ;   nsbc = jp_flx     ; icpt = icpt + 1   ;   ENDIF       ! flux                 formulation
235      IF( ln_blk_clio     ) THEN   ;   nsbc = jp_clio    ; icpt = icpt + 1   ;   ENDIF       ! CLIO bulk            formulation
236      IF( ln_blk_core     ) THEN   ;   nsbc = jp_core    ; icpt = icpt + 1   ;   ENDIF       ! CORE bulk            formulation
237      IF( ln_blk_mfs      ) THEN   ;   nsbc = jp_mfs     ; icpt = icpt + 1   ;   ENDIF       ! MFS  bulk            formulation
238      IF( ll_purecpl      ) THEN   ;   nsbc = jp_purecpl ; icpt = icpt + 1   ;   ENDIF       ! Pure Coupled         formulation
239      IF( cp_cfg == 'gyre') THEN   ;   nsbc = jp_gyre                        ;   ENDIF       ! GYRE analytical      formulation
240      IF( nn_components == jp_iam_opa )   &
241         &                  THEN   ;   nsbc = jp_none    ; icpt = icpt + 1   ;   ENDIF       ! opa coupling via SAS module
242      !
243      IF( icpt /= 1 )    CALL ctl_stop( 'sbc_init: choose ONE and only ONE sbc option' )
244      !
245      IF(lwp) THEN
246         WRITE(numout,*)
247         IF( nsbc == jp_gyre    )   WRITE(numout,*) '              GYRE analytical formulation'
248         IF( nsbc == jp_ana     )   WRITE(numout,*) '              analytical formulation'
249         IF( nsbc == jp_flx     )   WRITE(numout,*) '              flux formulation'
250         IF( nsbc == jp_clio    )   WRITE(numout,*) '              CLIO bulk formulation'
251         IF( nsbc == jp_core    )   WRITE(numout,*) '              CORE bulk formulation'
252         IF( nsbc == jp_purecpl )   WRITE(numout,*) '              pure coupled formulation'
253         IF( nsbc == jp_mfs     )   WRITE(numout,*) '              MFS Bulk formulation'
254         IF( nsbc == jp_none    )   WRITE(numout,*) '              OPA coupled to SAS via oasis'
255         IF( ln_mixcpl          )   WRITE(numout,*) '              + forced-coupled mixed formulation'
256         IF( nn_components/= jp_iam_nemo )  &
257            &                       WRITE(numout,*) '              + OASIS coupled SAS'
258      ENDIF
259      !
260      IF( lk_oasis )   CALL sbc_cpl_init (nn_ice)   ! OASIS initialisation. must be done before: (1) first time step
261      !                                             !                                            (2) the use of nn_fsbc
262
263!     nn_fsbc initialization if OPA-SAS coupling via OASIS
264!     sas model time step has to be declared in OASIS (mandatory) -> nn_fsbc has to be modified accordingly
265      IF ( nn_components /= jp_iam_nemo ) THEN
266         IF ( nn_components == jp_iam_opa ) nn_fsbc = cpl_freq('O_SFLX') / NINT(rdt)
267         IF ( nn_components == jp_iam_sas ) nn_fsbc = cpl_freq('I_SFLX') / NINT(rdt)
268         !
269         IF(lwp)THEN
270            WRITE(numout,*)
271            WRITE(numout,*)"   OPA-SAS coupled via OASIS : nn_fsbc re-defined from OASIS namcouple ", nn_fsbc
272            WRITE(numout,*)
273         ENDIF
274      ENDIF
275
276      IF( MOD( nitend - nit000 + 1, nn_fsbc) /= 0 .OR.   &
277          MOD( nstock             , nn_fsbc) /= 0 ) THEN
278         WRITE(ctmp1,*) 'experiment length (', nitend - nit000 + 1, ') or nstock (', nstock,   &
279            &           ' is NOT a multiple of nn_fsbc (', nn_fsbc, ')'
280         CALL ctl_stop( ctmp1, 'Impossible to properly do model restart' )
281      ENDIF
282      !
283      IF( MOD( rday, REAL(nn_fsbc, wp) * rdt ) /= 0 )   &
284         &  CALL ctl_warn( 'nn_fsbc is NOT a multiple of the number of time steps in a day' )
285      !
286      IF( ln_dm2dc .AND. ( ( NINT(rday) / ( nn_fsbc * NINT(rdt) ) )  < 8 ) )   &
287         &   CALL ctl_warn( 'diurnal cycle for qsr: the sampling of the diurnal cycle is too small...' )
288
289                               CALL sbc_ssm_init               ! Sea-surface mean fields initialisation
290      !
291      IF( ln_ssr           )   CALL sbc_ssr_init               ! Sea-Surface Restoring initialisation
292      !
293                               CALL sbc_rnf_init               ! Runof initialisation
294      !
295      IF( nn_ice == 3      )   CALL sbc_lim_init               ! LIM3 initialisation
296
297      IF( nn_ice == 4      )   CALL cice_sbc_init( nsbc )      ! CICE initialisation
298     
299   END SUBROUTINE sbc_init
300
301
302   SUBROUTINE sbc( kt )
303      !!---------------------------------------------------------------------
304      !!                    ***  ROUTINE sbc  ***
305      !!             
306      !! ** Purpose :   provide at each time-step the ocean surface boundary
307      !!                condition (momentum, heat and freshwater fluxes)
308      !!
309      !! ** Method  :   blah blah  to be written ?????????
310      !!                CAUTION : never mask the surface stress field (tke sbc)
311      !!
312      !! ** Action  : - set the ocean surface boundary condition at before and now
313      !!                time step, i.e. 
314      !!                utau_b, vtau_b, qns_b, qsr_b, emp_n, sfx_b, qrp_b, erp_b
315      !!                utau  , vtau  , qns  , qsr  , emp  , sfx  , qrp  , erp
316      !!              - updte the ice fraction : fr_i
317      !!----------------------------------------------------------------------
318      INTEGER, INTENT(in) ::   kt       ! ocean time step
319      !!---------------------------------------------------------------------
320      !
321      IF( nn_timing == 1 )  CALL timing_start('sbc')
322      !
323      !                                            ! ---------------------------------------- !
324      IF( kt /= nit000 ) THEN                      !          Swap of forcing fields          !
325         !                                         ! ---------------------------------------- !
326         utau_b(:,:) = utau(:,:)                         ! Swap the ocean forcing fields
327         vtau_b(:,:) = vtau(:,:)                         ! (except at nit000 where before fields
328         qns_b (:,:) = qns (:,:)                         !  are set at the end of the routine)
329         ! The 3D heat content due to qsr forcing is treated in traqsr
330         ! qsr_b (:,:) = qsr (:,:)
331         emp_b(:,:) = emp(:,:)
332         sfx_b(:,:) = sfx(:,:)
333      ENDIF
334      !                                            ! ---------------------------------------- !
335      !                                            !        forcing field computation         !
336      !                                            ! ---------------------------------------- !
337      !
338      IF( nn_components /= jp_iam_sas )   CALL sbc_ssm( kt )   ! ocean sea surface variables (sst_m, sss_m, ssu_m, ssv_m)
339      !                                                        ! averaged over nf_sbc time-step
340
341      IF (ln_wave) CALL sbc_wave( kt )
342                                                   !==  sbc formulation  ==!
343                                                           
344      SELECT CASE( nsbc )                                ! Compute ocean surface boundary condition
345      !                                                  ! (i.e. utau,vtau, qns, qsr, emp, sfx)
346      CASE( jp_gyre  )   ;   CALL sbc_gyre    ( kt )                    ! analytical formulation : GYRE configuration
347      CASE( jp_ana   )   ;   CALL sbc_ana     ( kt )                    ! analytical formulation : uniform sbc
348      CASE( jp_flx   )   ;   CALL sbc_flx     ( kt )                    ! flux formulation
349      CASE( jp_clio  )   ;   CALL sbc_blk_clio( kt )                    ! bulk formulation : CLIO for the ocean
350      CASE( jp_core  )   
351         IF( nn_components == jp_iam_sas ) &
352            &                CALL sbc_cpl_rcv ( kt, nn_fsbc, nn_ice )   ! OPA-SAS coupling: SAS receiving fields from OPA
353                             CALL sbc_blk_core( kt )                    ! bulk formulation : CORE for the ocean
354                                                                        ! from oce: sea surface variables (sst_m, sss_m,  ssu_m,  ssv_m)
355      CASE( jp_purecpl )  ;  CALL sbc_cpl_rcv ( kt, nn_fsbc, nn_ice )   ! pure coupled formulation
356                                                                        !
357      CASE( jp_mfs   )   ;   CALL sbc_blk_mfs ( kt )                    ! bulk formulation : MFS for the ocean
358      CASE( jp_none  ) 
359         IF( nn_components == jp_iam_opa ) &
360                             CALL sbc_cpl_rcv ( kt, nn_fsbc, nn_ice )   ! OPA-SAS coupling: OPA receiving fields from SAS
361      END SELECT
362      IF (ln_wave .AND. ln_tauoc) THEN
363            utau(:,:) = utau(:,:)*tauoc_wave(:,:)
364            vtau(:,:) = vtau(:,:)*tauoc_wave(:,:)
365            taum(:,:) = taum(:,:)*tauoc_wave(:,:)
366      !
367            SELECT CASE( nsbc )
368            CASE(  0,1,2,3,5,-1 )  ;
369                IF(lwp) WRITE(numout,*) 'WARNING: You are subtracting the wave stress to the ocean. &
370                        & If not requested select ln_tauoc=.false'
371            END SELECT
372      !
373      END IF
374      IF( ln_mixcpl )        CALL sbc_cpl_rcv ( kt, nn_fsbc, nn_ice )   ! forced-coupled mixed formulation after forcing
375
376
377      !                                            !==  Misc. Options  ==!
378     
379      SELECT CASE( nn_ice )                                       ! Update heat and freshwater fluxes over sea-ice areas
380      CASE(  1 )   ;         CALL sbc_ice_if   ( kt )                ! Ice-cover climatology ("Ice-if" model)
381      CASE(  2 )   ;         CALL sbc_ice_lim_2( kt, nsbc )          ! LIM-2 ice model
382      CASE(  3 )   ;         CALL sbc_ice_lim  ( kt, nsbc )          ! LIM-3 ice model
383      CASE(  4 )   ;         CALL sbc_ice_cice ( kt, nsbc )          ! CICE ice model
384      END SELECT                                             
385
386      IF( ln_icebergs    )   CALL icb_stp( kt )                   ! compute icebergs
387
388      IF( nn_isf   /= 0  )   CALL sbc_isf( kt )                    ! compute iceshelves
389
390      IF( ln_rnf         )   CALL sbc_rnf( kt )                   ! add runoffs to fresh water fluxes
391 
392      IF( ln_ssr         )   CALL sbc_ssr( kt )                   ! add SST/SSS damping term
393
394      IF( nn_fwb    /= 0 )   CALL sbc_fwb( kt, nn_fwb, nn_fsbc )  ! control the freshwater budget
395
396      IF( nn_closea == 1 )   CALL sbc_clo( kt )                   ! treatment of closed sea in the model domain
397      !                                                           ! (update freshwater fluxes)
398!RBbug do not understand why see ticket 667
399!clem: it looks like it is necessary for the north fold (in certain circumstances). Don't know why.
400      CALL lbc_lnk( emp, 'T', 1. )
401      !
402      IF( kt == nit000 ) THEN                          !   set the forcing field at nit000 - 1    !
403         !                                             ! ---------------------------------------- !
404         IF( ln_rstart .AND.    &                               !* Restart: read in restart file
405            & iom_varid( numror, 'utau_b', ldstop = .FALSE. ) > 0 ) THEN
406            IF(lwp) WRITE(numout,*) '          nit000-1 surface forcing fields red in the restart file'
407            CALL iom_get( numror, jpdom_autoglo, 'utau_b', utau_b )   ! before i-stress  (U-point)
408            CALL iom_get( numror, jpdom_autoglo, 'vtau_b', vtau_b )   ! before j-stress  (V-point)
409            CALL iom_get( numror, jpdom_autoglo, 'qns_b' , qns_b  )   ! before non solar heat flux (T-point)
410            ! The 3D heat content due to qsr forcing is treated in traqsr
411            ! CALL iom_get( numror, jpdom_autoglo, 'qsr_b' , qsr_b  ) ! before     solar heat flux (T-point)
412            CALL iom_get( numror, jpdom_autoglo, 'emp_b', emp_b  )    ! before     freshwater flux (T-point)
413            ! To ensure restart capability with 3.3x/3.4 restart files    !! to be removed in v3.6
414            IF( iom_varid( numror, 'sfx_b', ldstop = .FALSE. ) > 0 ) THEN
415               CALL iom_get( numror, jpdom_autoglo, 'sfx_b', sfx_b )  ! before salt flux (T-point)
416            ELSE
417               sfx_b (:,:) = sfx(:,:)
418            ENDIF
419         ELSE                                                   !* no restart: set from nit000 values
420            IF(lwp) WRITE(numout,*) '          nit000-1 surface forcing fields set to nit000'
421            utau_b(:,:) = utau(:,:) 
422            vtau_b(:,:) = vtau(:,:)
423            qns_b (:,:) = qns (:,:)
424            emp_b (:,:) = emp(:,:)
425            sfx_b (:,:) = sfx(:,:)
426         ENDIF
427      ENDIF
428      !                                                ! ---------------------------------------- !
429      IF( lrst_oce ) THEN                              !      Write in the ocean restart file     !
430         !                                             ! ---------------------------------------- !
431         IF(lwp) WRITE(numout,*)
432         IF(lwp) WRITE(numout,*) 'sbc : ocean surface forcing fields written in ocean restart file ',   &
433            &                    'at it= ', kt,' date= ', ndastp
434         IF(lwp) WRITE(numout,*) '~~~~'
435         CALL iom_rstput( kt, nitrst, numrow, 'utau_b' , utau )
436         CALL iom_rstput( kt, nitrst, numrow, 'vtau_b' , vtau )
437         CALL iom_rstput( kt, nitrst, numrow, 'qns_b'  , qns  )
438         ! The 3D heat content due to qsr forcing is treated in traqsr
439         ! CALL iom_rstput( kt, nitrst, numrow, 'qsr_b'  , qsr  )
440         CALL iom_rstput( kt, nitrst, numrow, 'emp_b'  , emp  )
441         CALL iom_rstput( kt, nitrst, numrow, 'sfx_b'  , sfx  )
442      ENDIF
443
444      !                                                ! ---------------------------------------- !
445      !                                                !        Outputs and control print         !
446      !                                                ! ---------------------------------------- !
447      IF( MOD( kt-1, nn_fsbc ) == 0 ) THEN
448         CALL iom_put( "empmr" , emp  - rnf )                   ! upward water flux
449         CALL iom_put( "saltflx", sfx  )                        ! downward salt flux 
450                                                                ! (includes virtual salt flux beneath ice
451                                                                ! in linear free surface case)
452         CALL iom_put( "fmmflx", fmmflx  )                      ! Freezing-melting water flux
453         CALL iom_put( "qt"    , qns  + qsr )                   ! total heat flux
454         CALL iom_put( "qns"   , qns        )                   ! solar heat flux
455         CALL iom_put( "qsr"   ,       qsr  )                   ! solar heat flux
456         IF( nn_ice > 0 .OR. nn_components == jp_iam_opa )   CALL iom_put( "ice_cover", fr_i )   ! ice fraction
457         CALL iom_put( "taum"  , taum       )                   ! wind stress module
458         CALL iom_put( "wspd"  , wndm       )                   ! wind speed  module over free ocean or leads in presence of sea-ice
459      ENDIF
460      !
461      CALL iom_put( "utau", utau )   ! i-wind stress   (stress can be updated at
462      CALL iom_put( "vtau", vtau )   ! j-wind stress    each time step in sea-ice)
463      !
464      IF(ln_ctl) THEN         ! print mean trends (used for debugging)
465         CALL prt_ctl(tab2d_1=fr_i              , clinfo1=' fr_i     - : ', mask1=tmask, ovlap=1 )
466         CALL prt_ctl(tab2d_1=(emp-rnf + fwfisf), clinfo1=' emp-rnf  - : ', mask1=tmask, ovlap=1 )
467         CALL prt_ctl(tab2d_1=(sfx-rnf + fwfisf), clinfo1=' sfx-rnf  - : ', mask1=tmask, ovlap=1 )
468         CALL prt_ctl(tab2d_1=qns              , clinfo1=' qns      - : ', mask1=tmask, ovlap=1 )
469         CALL prt_ctl(tab2d_1=qsr              , clinfo1=' qsr      - : ', mask1=tmask, ovlap=1 )
470         CALL prt_ctl(tab3d_1=tmask            , clinfo1=' tmask    - : ', mask1=tmask, ovlap=1, kdim=jpk )
471         CALL prt_ctl(tab3d_1=tsn(:,:,:,jp_tem), clinfo1=' sst      - : ', mask1=tmask, ovlap=1, kdim=1   )
472         CALL prt_ctl(tab3d_1=tsn(:,:,:,jp_sal), clinfo1=' sss      - : ', mask1=tmask, ovlap=1, kdim=1   )
473         CALL prt_ctl(tab2d_1=utau             , clinfo1=' utau     - : ', mask1=umask,                      &
474            &         tab2d_2=vtau             , clinfo2=' vtau     - : ', mask2=vmask, ovlap=1 )
475      ENDIF
476
477      IF( kt == nitend )   CALL sbc_final         ! Close down surface module if necessary
478      !
479      IF( nn_timing == 1 )  CALL timing_stop('sbc')
480      !
481   END SUBROUTINE sbc
482
483
484   SUBROUTINE sbc_final
485      !!---------------------------------------------------------------------
486      !!                    ***  ROUTINE sbc_final  ***
487      !!
488      !! ** Purpose :   Finalize CICE (if used)
489      !!---------------------------------------------------------------------
490      !
491      IF( nn_ice == 4 )   CALL cice_sbc_final
492      !
493   END SUBROUTINE sbc_final
494
495   !!======================================================================
496END MODULE sbcmod
Note: See TracBrowser for help on using the repository browser.