MODULE limthd_2 !!====================================================================== !! *** MODULE limthd_2 *** !! LIM thermo ice model : ice thermodynamic !!====================================================================== !! History : 1.0 ! 2000-01 (LIM) !! 2.0 ! 2002-07 (C. Ethe, G. Madec) F90 !! 2.0 ! 2003-08 (C. Ethe) add lim_thd_init !! - ! 2008-2008 (A. Caubel, G. Madec, E. Maisonnave, S. Masson ) generic coupled interface !!--------------------------------------------------------------------- #if defined key_lim2 !!---------------------------------------------------------------------- !! 'key_lim2' : LIM 2.0 sea-ice model !!---------------------------------------------------------------------- !! lim_thd_2 : thermodynamic of sea ice !! lim_thd_init_2 : initialisation of sea-ice thermodynamic !!---------------------------------------------------------------------- USE phycst ! physical constants USE dom_oce ! ocean space and time domain variables USE domvvl USE lbclnk USE in_out_manager ! I/O manager USE lib_mpp USE wrk_nemo ! work arrays USE iom ! IOM library USE ice_2 ! LIM sea-ice variables USE sbc_oce ! USE sbc_ice ! USE thd_ice_2 ! LIM thermodynamic sea-ice variables USE dom_ice_2 ! LIM sea-ice domain USE limthd_zdf_2 USE limthd_lac_2 USE limtab_2 USE prtctl ! Print control USE lib_fortran ! Fortran utilities (allows no signed zero when 'key_nosignedzero' defined) IMPLICIT NONE PRIVATE PUBLIC lim_thd_2 ! called by lim_step REAL(wp) :: epsi20 = 1.e-20 ! constant values REAL(wp) :: epsi16 = 1.e-16 ! REAL(wp) :: epsi04 = 1.e-04 ! REAL(wp) :: rzero = 0.e0 ! REAL(wp) :: rone = 1.e0 ! !! * Substitutions # include "domzgr_substitute.h90" # include "vectopt_loop_substitute.h90" !!-------- ------------------------------------------------------------- !! NEMO/LIM2 3.3 , UCL - NEMO Consortium (2010) !! $Id$ !! Software governed by the CeCILL licence (NEMOGCM/NEMO_CeCILL.txt) !!---------------------------------------------------------------------- CONTAINS SUBROUTINE lim_thd_2( kt ) !!------------------------------------------------------------------- !! *** ROUTINE lim_thd_2 *** !! !! ** Purpose : This routine manages the ice thermodynamic. !! !! ** Action : - Initialisation of some variables !! - Some preliminary computation (oceanic heat flux !! at the ice base, snow acc.,heat budget of the leads) !! - selection of the icy points and put them in an array !! - call lim_vert_ther for vert ice thermodynamic !! - back to the geographic grid !! - selection of points for lateral accretion !! - call lim_lat_acc for the ice accretion !! - back to the geographic grid !! !! References : Goosse et al. 1996, Bul. Soc. Roy. Sc. Liege, 65, 87-90 !!--------------------------------------------------------------------- INTEGER, INTENT(in) :: kt ! number of iteration !! INTEGER :: ji, jj ! dummy loop indices INTEGER :: nbpb ! nb of icy pts for thermo. cal. INTEGER :: nbpac ! nb of pts for lateral accretion CHARACTER (len=22) :: charout REAL(wp) :: zfric_umin = 5e-03 ! lower bound for the friction velocity REAL(wp) :: zfric_umax = 2e-02 ! upper bound for the friction velocity REAL(wp) :: zinda ! switch for test. the val. of concen. REAL(wp) :: zindb, zindg ! switches for test. the val of arg REAL(wp) :: zfricp ! temporary scalar REAL(wp) :: za , zh, zthsnice ! REAL(wp) :: zfric_u ! friction velocity REAL(wp) :: zfntlat, zpareff ! test. the val. of lead heat budget REAL(wp) :: zuice_m, zvice_m ! Sea-ice velocities at U & V-points REAL(wp) :: zhice_u, zhice_v ! Sea-ice volume at U & V-points REAL(wp) :: ztr_fram ! Sea-ice transport through Fram strait REAL(wp) :: zrhoij, zrhoijm1 ! temporary scalars REAL(wp) :: zztmp ! temporary scalars within a loop REAL(wp), POINTER, DIMENSION(:,:) :: ztmp ! 2D workspace REAL(wp), POINTER, DIMENSION(:,:) :: zqlbsbq ! link with lead energy budget qldif REAL(wp), POINTER, DIMENSION(:,:) :: zlicegr ! link with lateral ice growth !!$ REAL(wp), DIMENSION(:,:) :: firic ! IR flux over the ice (outputs only) !!$ REAL(wp), DIMENSION(:,:) :: fcsic ! Sensible heat flux over the ice (outputs only) !!$ REAL(wp), DIMENSION(:,:) :: fleic ! Latent heat flux over the ice (outputs only) !!$ REAL(wp), DIMENSION(:,:) :: qlatic ! latent flux (outputs only) REAL(wp), POINTER, DIMENSION(:,:) :: zdvosif ! Variation of volume at surface (outputs only) REAL(wp), POINTER, DIMENSION(:,:) :: zdvobif ! Variation of ice volume at the bottom ice (outputs only) REAL(wp), POINTER, DIMENSION(:,:) :: zdvolif ! Total variation of ice volume (outputs only) REAL(wp), POINTER, DIMENSION(:,:) :: zdvonif ! Surface accretion Snow to Ice transformation (outputs only) REAL(wp), POINTER, DIMENSION(:,:) :: zdvomif ! Bottom variation of ice volume due to melting (outputs only) REAL(wp), POINTER, DIMENSION(:,:) :: zu_imasstr ! Sea-ice transport along i-axis at U-point (outputs only) REAL(wp), POINTER, DIMENSION(:,:) :: zv_imasstr ! Sea-ice transport along j-axis at V-point (outputs only) REAL(wp), POINTER, DIMENSION(:,:,:) :: zmsk ! 3D workspace !!------------------------------------------------------------------- CALL wrk_alloc( jpi, jpj, ztmp, zqlbsbq, zlicegr, zdvosif, zdvobif, zdvolif, zdvonif, zdvomif, zu_imasstr, zv_imasstr ) CALL wrk_alloc( jpi, jpj, jpk, zmsk ) IF( kt == nit000 ) CALL lim_thd_init_2 ! Initialization (first time-step only) !-------------------------------------------! ! Initilization of diagnostic variables ! !-------------------------------------------! !!gm needed? yes at least for some of these arrays zdvosif(:,:) = 0.e0 ! variation of ice volume at surface zdvobif(:,:) = 0.e0 ! variation of ice volume at bottom zdvolif(:,:) = 0.e0 ! total variation of ice volume zdvonif(:,:) = 0.e0 ! transformation of snow to sea-ice volume zlicegr(:,:) = 0.e0 ! lateral variation of ice volume zdvomif(:,:) = 0.e0 ! variation of ice volume at bottom due to melting only ztr_fram = 0.e0 ! sea-ice transport through Fram strait fstric (:,:) = 0.e0 ! part of solar radiation absorbing inside the ice fscmbq (:,:) = 0.e0 ! linked with fstric ffltbif(:,:) = 0.e0 ! linked with fstric qfvbq (:,:) = 0.e0 ! linked with fstric rdm_snw(:,:) = 0.e0 ! variation of snow mass over 1 time step rdq_snw(:,:) = 0.e0 ! heat content associated with rdm_snw rdm_ice(:,:) = 0.e0 ! variation of ice mass over 1 time step rdq_ice(:,:) = 0.e0 ! heat content associated with rdm_ice zmsk (:,:,:) = 0.e0 IF( ltrcdm2dc_ice ) fstric_daymean (:,:) = 0.e0 ! part of solar radiation absorbing inside the ice ! set to zero snow thickness smaller than epsi04 DO jj = 1, jpj DO ji = 1, jpi hsnif(ji,jj) = hsnif(ji,jj) * MAX( rzero, SIGN( rone , hsnif(ji,jj) - epsi04 ) ) END DO END DO !!gm better coded (do not use SIGN...) ! WHERE( hsnif(:,:) < epsi04 ) hsnif(:,:) = 0.e0 !!gm IF(ln_ctl) CALL prt_ctl( tab2d_1=hsnif, clinfo1=' lim_thd: hsnif : ' ) !-----------------------------------! ! Treatment of particular cases ! !-----------------------------------! DO jj = 1, jpj DO ji = 1, jpi ! snow is transformed into ice if the original ice cover disappears. zindg = tms(ji,jj) * MAX( rzero , SIGN( rone , -hicif(ji,jj) ) ) hicif(ji,jj) = hicif(ji,jj) + zindg * rhosn * hsnif(ji,jj) / rau0 hsnif(ji,jj) = ( rone - zindg ) * hsnif(ji,jj) + zindg * hicif(ji,jj) * ( rau0 - rhoic ) / rhosn dmgwi(ji,jj) = zindg * (1.0 - frld(ji,jj)) * rhoic * hicif(ji,jj) ! snow/ice mass ! the lead fraction, frld, must be little than or equal to amax (ice ridging). zthsnice = hsnif(ji,jj) + hicif(ji,jj) zindb = tms(ji,jj) * ( 1.0 - MAX( rzero , SIGN( rone , - zthsnice ) ) ) za = zindb * MIN( rone, ( 1.0 - frld(ji,jj) ) * uscomi ) hsnif (ji,jj) = hsnif(ji,jj) * za hicif (ji,jj) = hicif(ji,jj) * za qstoif(ji,jj) = qstoif(ji,jj) * za frld (ji,jj) = 1.0 - zindb * ( 1.0 - frld(ji,jj) ) / MAX( za, epsi20 ) ! the in situ ice thickness, hicif, must be equal to or greater than hiclim. zh = MAX( rone , zindb * hiclim / MAX( hicif(ji,jj), epsi20 ) ) hsnif (ji,jj) = hsnif(ji,jj) * zh hicif (ji,jj) = hicif(ji,jj) * zh qstoif(ji,jj) = qstoif(ji,jj) * zh frld (ji,jj) = ( frld(ji,jj) + ( zh - 1.0 ) ) / zh END DO END DO IF(ln_ctl) THEN CALL prt_ctl( tab2d_1=hicif , clinfo1=' lim_thd: hicif : ' ) CALL prt_ctl( tab2d_1=hsnif , clinfo1=' lim_thd: hsnif : ' ) CALL prt_ctl( tab2d_1=dmgwi , clinfo1=' lim_thd: dmgwi : ' ) CALL prt_ctl( tab2d_1=qstoif, clinfo1=' lim_thd: qstoif : ' ) CALL prt_ctl( tab2d_1=frld , clinfo1=' lim_thd: frld : ' ) ENDIF !-------------------------------! ! Thermodynamics of sea ice ! !-------------------------------! ! Partial computation of forcing for the thermodynamic sea ice model. !-------------------------------------------------------------------------- !CDIR NOVERRCHK DO jj = 1, jpj !CDIR NOVERRCHK DO ji = 1, jpi zthsnice = hsnif(ji,jj) + hicif(ji,jj) zindb = tms(ji,jj) * ( 1.0 - MAX( rzero , SIGN( rone , - zthsnice ) ) ) pfrld(ji,jj) = frld(ji,jj) zfricp = 1.0 - frld(ji,jj) zinda = 1.0 - MAX( rzero , SIGN( rone , - zfricp ) ) ! solar irradiance transmission at the mixed layer bottom and used in the lead heat budget thcm(ji,jj) = 0.e0 ! net downward heat flux from the ice to the ocean, expressed as a function of ocean ! temperature and turbulent mixing (McPhee, 1992) zfric_u = MAX ( MIN( SQRT( ust2s(ji,jj) ) , zfric_umax ) , zfric_umin ) ! friction velocity fdtcn(ji,jj) = zindb * rau0 * rcp * 0.006 * zfric_u * ( sst_m(ji,jj) + rt0 - tfu(ji,jj) ) qdtcn(ji,jj) = zindb * fdtcn(ji,jj) * frld(ji,jj) * rdt_ice ! partial computation of the lead energy budget (qldif) IF( lk_cpl ) THEN qldif(ji,jj) = tms(ji,jj) * rdt_ice & & * ( ( qsr_tot(ji,jj) - qsr_ice(ji,jj,1) * zfricp ) * ( 1.0 - thcm(ji,jj) ) & & + ( qns_tot(ji,jj) - qns_ice(ji,jj,1) * zfricp ) & & + frld(ji,jj) * ( fdtcn(ji,jj) + ( 1.0 - zindb ) * fsbbq(ji,jj) ) ) ELSE qldif(ji,jj) = tms(ji,jj) * rdt_ice * frld(ji,jj) & & * ( qsr(ji,jj) * ( 1.0 - thcm(ji,jj) ) & & + qns(ji,jj) + fdtcn(ji,jj) & & + ( 1.0 - zindb ) * fsbbq(ji,jj) ) ENDIF ! parlat : percentage of energy used for lateral ablation (0.0) zfntlat = 1.0 - MAX( rzero , SIGN( rone , - qldif(ji,jj) ) ) zpareff = 1.0 + ( parlat - 1.0 ) * zinda * zfntlat zqlbsbq(ji,jj) = qldif(ji,jj) * ( 1.0 - zpareff ) / MAX( (1.0 - frld(ji,jj)) * rdt_ice , epsi16 ) qldif (ji,jj) = zpareff * qldif(ji,jj) qdtcn (ji,jj) = zpareff * qdtcn(ji,jj) ! energy needed to bring ocean surface layer until its freezing qcmif (ji,jj) = rau0 * rcp * fse3t_m(ji,jj) * ( tfu(ji,jj) - sst_m(ji,jj) - rt0 ) * ( 1 - zinda ) ! calculate oceanic heat flux. fbif (ji,jj) = zindb * ( fsbbq(ji,jj) / MAX( (1.0 - frld(ji,jj)) , epsi20 ) + fdtcn(ji,jj) ) ! computation of the thermodynamic ice production (only needed for output) hicifp(ji,jj) = hicif(ji,jj) * ( 1.0 - frld(ji,jj) ) END DO END DO ! Select icy points and fulfill arrays for the vectorial grid. !---------------------------------------------------------------------- nbpb = 0 DO jj = 1, jpj DO ji = 1, jpi IF ( frld(ji,jj) < 1.0 ) THEN nbpb = nbpb + 1 npb(nbpb) = (jj - 1) * jpi + ji ENDIF END DO END DO IF(ln_ctl) THEN CALL prt_ctl(tab2d_1=pfrld, clinfo1=' lim_thd: pfrld : ', tab2d_2=thcm , clinfo2=' thcm : ') CALL prt_ctl(tab2d_1=fdtcn, clinfo1=' lim_thd: fdtcn : ', tab2d_2=qdtcn , clinfo2=' qdtcn : ') CALL prt_ctl(tab2d_1=qldif, clinfo1=' lim_thd: qldif : ', tab2d_2=zqlbsbq, clinfo2=' zqlbsbq : ') CALL prt_ctl(tab2d_1=qcmif, clinfo1=' lim_thd: qcmif : ', tab2d_2=fbif , clinfo2=' fbif : ') zmsk(:,:,1) = tms(:,:) CALL prt_ctl(tab2d_1=qcmif , clinfo1=' lim_thd: qcmif : ', mask1=zmsk) CALL prt_ctl(tab2d_1=hicifp, clinfo1=' lim_thd: hicifp : ') WRITE(charout, FMT="('lim_thd: nbpb = ',I4)") nbpb CALL prt_ctl_info(charout) ENDIF ! If there is no ice, do nothing. Otherwise, compute Top and Bottom accretion/ablation !------------------------------------------------------------------------------------ IF( nbpb > 0 ) THEN ! ! put the variable in a 1-D array for thermodynamics process CALL tab_2d_1d_2( nbpb, frld_1d (1:nbpb) , frld , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, h_ice_1d (1:nbpb) , hicif , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, h_snow_1d (1:nbpb) , hsnif , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, sist_1d (1:nbpb) , sist , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, tbif_1d (1:nbpb , 1 ), tbif(:,:,1) , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, tbif_1d (1:nbpb , 2 ), tbif(:,:,2) , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, tbif_1d (1:nbpb , 3 ), tbif(:,:,3) , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, qsr_ice_1d (1:nbpb) , qsr_ice(:,:,1) , jpi, jpj, npb(1:nbpb) ) IF( ltrcdm2dc_ice ) & & CALL tab_2d_1d_2( nbpb, qsr_ice_mean_1d (1:nbpb), qsr_ice_mean(:,:,1), jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, fr1_i0_1d (1:nbpb) , fr1_i0 , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, fr2_i0_1d (1:nbpb) , fr2_i0 , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, qns_ice_1d(1:nbpb) , qns_ice(:,:,1), jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, dqns_ice_1d(1:nbpb) , dqns_ice(:,:,1), jpi, jpj, npb(1:nbpb) ) IF( .NOT. lk_cpl ) THEN CALL tab_2d_1d_2( nbpb, qla_ice_1d (1:nbpb) , qla_ice(:,:,1), jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, dqla_ice_1d(1:nbpb) , dqla_ice(:,:,1), jpi, jpj, npb(1:nbpb) ) ENDIF CALL tab_2d_1d_2( nbpb, tfu_1d (1:nbpb) , tfu , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, sprecip_1d (1:nbpb) , sprecip , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, fbif_1d (1:nbpb) , fbif , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, thcm_1d (1:nbpb) , thcm , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, qldif_1d (1:nbpb) , qldif , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, qstbif_1d (1:nbpb) , qstoif , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, rdm_ice_1d (1:nbpb) , rdm_ice , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, rdq_ice_1d (1:nbpb) , rdq_ice , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, dmgwi_1d (1:nbpb) , dmgwi , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, rdm_snw_1d (1:nbpb) , rdm_snw , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, rdq_snw_1d (1:nbpb) , rdq_snw , jpi, jpj, npb(1:nbpb) ) CALL tab_2d_1d_2( nbpb, qlbbq_1d (1:nbpb) , zqlbsbq , jpi, jpj, npb(1:nbpb) ) ! CALL lim_thd_zdf_2( 1, nbpb ) ! compute ice growth ! ! back to the geographic grid. CALL tab_1d_2d_2( nbpb, frld , npb, frld_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, hicif , npb, h_ice_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, hsnif , npb, h_snow_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, sist , npb, sist_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, tbif(:,:,1), npb, tbif_1d (1:nbpb , 1 ), jpi, jpj ) CALL tab_1d_2d_2( nbpb, tbif(:,:,2), npb, tbif_1d (1:nbpb , 2 ), jpi, jpj ) CALL tab_1d_2d_2( nbpb, tbif(:,:,3), npb, tbif_1d (1:nbpb , 3 ), jpi, jpj ) CALL tab_1d_2d_2( nbpb, fscmbq , npb, fscbq_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, ffltbif , npb, fltbif_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, fstric , npb, fstbif_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, qldif , npb, qldif_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, qfvbq , npb, qfvbq_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, qstoif , npb, qstbif_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, rdm_ice , npb, rdm_ice_1d(1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, rdq_ice , npb, rdq_ice_1d(1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, dmgwi , npb, dmgwi_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, rdm_snw , npb, rdm_snw_1d(1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, rdq_snw , npb, rdq_snw_1d(1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, zdvosif , npb, dvsbq_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, zdvobif , npb, dvbbq_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, zdvomif , npb, rdvomif_1d(1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, zdvolif , npb, dvlbq_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, zdvonif , npb, dvnbq_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, qsr_ice(:,:,1), npb, qsr_ice_1d(1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, qns_ice(:,:,1), npb, qns_ice_1d(1:nbpb) , jpi, jpj ) IF( ltrcdm2dc_ice )THEN CALL tab_1d_2d_2( nbpb, fstric_daymean , npb, fstbif_daymean_1d (1:nbpb) , jpi, jpj ) CALL tab_1d_2d_2( nbpb, qsr_ice_mean(:,:,1), npb, qsr_ice_mean_1d(1:nbpb) , jpi, jpj ) ENDIF IF( .NOT. lk_cpl ) CALL tab_1d_2d_2( nbpb, qla_ice(:,:,1), npb, qla_ice_1d(1:nbpb) , jpi, jpj ) ! ENDIF ! Up-date sea ice thickness !-------------------------- DO jj = 1, jpj DO ji = 1, jpi phicif(ji,jj) = hicif(ji,jj) hicif(ji,jj) = hicif(ji,jj) * ( rone - MAX( rzero, SIGN( rone, - ( 1.0 - frld(ji,jj) ) ) ) ) END DO END DO ! Tricky trick : add 2 to frld in the Southern Hemisphere !-------------------------------------------------------- IF( fcor(1,1) < 0.e0 ) THEN DO jj = 1, njeqm1 DO ji = 1, jpi frld(ji,jj) = frld(ji,jj) + 2.0 END DO END DO ENDIF CALL lbc_lnk( frld , 'T', 1. ) ! Select points for lateral accretion (this occurs when heat exchange ! between ice and ocean is negative; ocean losing heat) !----------------------------------------------------------------- nbpac = 0 DO jj = 1, jpj DO ji = 1, jpi !i yes! IF ( ( qcmif(ji,jj) - qldif(ji,jj) ) > 0.e0 ) THEN IF ( tms(ji,jj) * ( qcmif(ji,jj) - qldif(ji,jj) ) > 0.e0 ) THEN nbpac = nbpac + 1 npac( nbpac ) = (jj - 1) * jpi + ji ENDIF END DO END DO IF(ln_ctl) THEN CALL prt_ctl(tab2d_1=phicif, clinfo1=' lim_thd: phicif : ', tab2d_2=hicif, clinfo2=' hicif : ') WRITE(charout, FMT="('lim_thd: nbpac = ',I4)") nbpac CALL prt_ctl_info(charout) ENDIF ! If ocean gains heat do nothing ; otherwise, one performs lateral accretion !-------------------------------------------------------------------------------- IF( nbpac > 0 ) THEN ! zlicegr(:,:) = rdm_ice(:,:) ! to output the lateral sea-ice growth !...Put the variable in a 1-D array for lateral accretion CALL tab_2d_1d_2( nbpac, frld_1d (1:nbpac) , frld , jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, h_snow_1d (1:nbpac) , hsnif , jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, h_ice_1d (1:nbpac) , hicif , jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, tbif_1d (1:nbpac , 1 ), tbif(:,:,1), jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, tbif_1d (1:nbpac , 2 ), tbif(:,:,2), jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, tbif_1d (1:nbpac , 3 ), tbif(:,:,3), jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, qldif_1d (1:nbpac) , qldif , jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, qcmif_1d (1:nbpac) , qcmif , jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, qstbif_1d (1:nbpac) , qstoif , jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, rdm_ice_1d(1:nbpac) , rdm_ice , jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, rdq_ice_1d(1:nbpac) , rdq_ice , jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, dvlbq_1d (1:nbpac) , zdvolif , jpi, jpj, npac(1:nbpac) ) CALL tab_2d_1d_2( nbpac, tfu_1d (1:nbpac) , tfu , jpi, jpj, npac(1:nbpac) ) ! CALL lim_thd_lac_2( 1 , nbpac ) ! lateral accretion routine. ! ! back to the geographic grid CALL tab_1d_2d_2( nbpac, frld , npac(1:nbpac), frld_1d (1:nbpac) , jpi, jpj ) CALL tab_1d_2d_2( nbpac, hsnif , npac(1:nbpac), h_snow_1d (1:nbpac) , jpi, jpj ) CALL tab_1d_2d_2( nbpac, hicif , npac(1:nbpac), h_ice_1d (1:nbpac) , jpi, jpj ) CALL tab_1d_2d_2( nbpac, tbif(:,:,1), npac(1:nbpac), tbif_1d (1:nbpac , 1 ), jpi, jpj ) CALL tab_1d_2d_2( nbpac, tbif(:,:,2), npac(1:nbpac), tbif_1d (1:nbpac , 2 ), jpi, jpj ) CALL tab_1d_2d_2( nbpac, tbif(:,:,3), npac(1:nbpac), tbif_1d (1:nbpac , 3 ), jpi, jpj ) CALL tab_1d_2d_2( nbpac, qstoif , npac(1:nbpac), qstbif_1d (1:nbpac) , jpi, jpj ) CALL tab_1d_2d_2( nbpac, rdm_ice , npac(1:nbpac), rdm_ice_1d(1:nbpac) , jpi, jpj ) CALL tab_1d_2d_2( nbpac, rdq_ice , npac(1:nbpac), rdq_ice_1d(1:nbpac) , jpi, jpj ) CALL tab_1d_2d_2( nbpac, zdvolif , npac(1:nbpac), dvlbq_1d (1:nbpac) , jpi, jpj ) ! ENDIF ! Recover frld values between 0 and 1 in the Southern Hemisphere (tricky trick) ! Update daily thermodynamic ice production. !------------------------------------------------------------------------------ DO jj = 1, jpj DO ji = 1, jpi frld (ji,jj) = MIN( frld(ji,jj), ABS( frld(ji,jj) - 2.0 ) ) fr_i (ji,jj) = 1.0 - frld(ji,jj) hicifp(ji,jj) = hicif(ji,jj) * fr_i(ji,jj) - hicifp(ji,jj) END DO END DO ! Outputs !-------------------------------------------------------------------------------- ztmp(:,:) = 1. - pfrld(:,:) ! fraction of ice after the dynamic, before the thermodynamic IF( iom_use('ist_cea' ) ) CALL iom_put( 'ist_cea', (sist(:,:) - rt0) * ztmp(:,:) ) ! Ice surface temperature [Celius] IF( iom_use('qsr_ai_cea' ) ) CALL iom_put( 'qsr_ai_cea', qsr_ice(:,:,1) * ztmp(:,:) ) ! Solar flux over the ice [W/m2] IF( iom_use('qns_ai_cea' ) ) CALL iom_put( 'qns_ai_cea', qns_ice(:,:,1) * ztmp(:,:) ) ! Non-solar flux over the ice [W/m2] IF( iom_use('qla_ai_cea' ) .AND. .NOT. lk_cpl ) & & CALL iom_put( 'qla_ai_cea', qla_ice(:,:,1) * ztmp(:,:) ) ! Latent flux over the ice [W/m2] ! IF( iom_use('snowthic_cea')) CALL iom_put( 'snowthic_cea', hsnif (:,:) * fr_i(:,:) ) ! Snow thickness [m] IF( iom_use('icethic_cea' )) CALL iom_put( 'icethic_cea' , hicif (:,:) * fr_i(:,:) ) ! Ice thickness [m] zztmp = 1.0 / rdt_ice IF( iom_use('iceprod_cea') ) CALL iom_put( 'iceprod_cea' , hicifp (:,:) * zztmp ) ! Ice produced [m/s] IF( iom_use('iiceconc' ) ) CALL iom_put( 'iiceconc' , fr_i(:,:) ) ! Ice concentration [-] IF( iom_use('snowmel_cea') ) CALL iom_put( 'snowmel_cea' , rdm_snw(:,:) * zztmp ) ! Snow melt [kg/m2/s] zztmp = rhoic / rdt_ice IF( iom_use('sntoice_cea') ) CALL iom_put( 'sntoice_cea' , zdvonif(:,:) * zztmp ) ! Snow to Ice transformation [kg/m2/s] IF( iom_use('ticemel_cea') ) CALL iom_put( 'ticemel_cea' , zdvosif(:,:) * zztmp ) ! Melt at Sea Ice top [kg/m2/s] IF( iom_use('bicemel_cea') ) CALL iom_put( 'bicemel_cea' , zdvomif(:,:) * zztmp ) ! Melt at Sea Ice bottom [kg/m2/s] IF( iom_use('licepro_cea') ) THEN zlicegr(:,:) = MAX( 0.e0, rdm_ice(:,:)-zlicegr(:,:) ) CALL iom_put( 'licepro_cea' , zlicegr(:,:) * zztmp ) ! Lateral sea ice growth [kg/m2/s] ENDIF ! ! Compute the Eastward & Northward sea-ice transport IF( iom_use('u_imasstr') ) THEN zztmp = 0.25 * rhoic DO jj = 1, jpjm1 DO ji = 1, jpim1 ! NO vector opt. ! Ice velocities, volume & transport at U-points zuice_m = u_ice(ji+1,jj+1) + u_ice(ji+1,jj ) zhice_u = hicif(ji,jj)*e2t(ji,jj)*fr_i(ji,jj) + hicif(ji+1,jj )*e2t(ji+1,jj )*fr_i(ji+1,jj ) zu_imasstr(ji,jj) = zztmp * zhice_u * zuice_m END DO END DO CALL lbc_lnk( zu_imasstr, 'U', -1. ) CALL iom_put( 'u_imasstr', zu_imasstr(:,:) ) ! Ice transport along i-axis at U-point [kg/s] ENDIF IF( iom_use('v_imasstr') ) THEN zztmp = 0.25 * rhoic DO jj = 1, jpjm1 DO ji = 1, jpim1 ! NO vector opt. ! Ice velocities, volume & transport at V-points zvice_m = v_ice(ji+1,jj+1) + v_ice(ji ,jj+1) zhice_v = hicif(ji,jj)*e1t(ji,jj)*fr_i(ji,jj) + hicif(ji ,jj+1)*e1t(ji ,jj+1)*fr_i(ji ,jj+1) zv_imasstr(ji,jj) = zztmp * zhice_v * zvice_m END DO END DO CALL lbc_lnk( zv_imasstr, 'V', -1. ) CALL iom_put( 'v_imasstr', zv_imasstr(:,:) ) ! Ice transport along j-axis at V-point [kg/s] ENDIF !! Fram Strait sea-ice transport (sea-ice + snow) (in ORCA2 = 5 points) IF( iom_use('fram_trans') .and. cp_cfg == "orca" .AND. jp_cfg == 2 ) THEN ! ORCA R2 configuration DO jj = mj0(137), mj1(137) ! B grid IF( mj0(jj-1) >= nldj ) THEN DO ji = MAX(mi0(134),nldi), MIN(mi1(138),nlei) zrhoij = e1t(ji,jj ) * fr_i(ji,jj ) * ( rhoic*hicif(ji,jj ) + rhosn*hsnif(ji,jj ) ) zrhoijm1 = e1t(ji,jj-1) * fr_i(ji,jj-1) * ( rhoic*hicif(ji,jj-1) + rhosn*hsnif(ji,jj-1) ) ztr_fram = ztr_fram - 0.25 * ( v_ice(ji,jj)+ v_ice(ji+1,jj) ) * ( zrhoij + zrhoijm1 ) END DO ENDIF END DO IF( lk_mpp ) CALL mpp_sum( ztr_fram ) CALL iom_put( 'fram_trans', ztr_fram ) ! Ice transport through Fram strait [kg/s] ENDIF IF( iom_use('ice_pres') .OR. iom_use('ist_ipa') .OR. iom_use('uice_ipa') .OR. iom_use('vice_ipa') ) THEN !! ce ztmp(:,:) = 1. - AINT( frld(:,:), wp ) ! return 1 as soon as there is ice !! ce A big warning because the model crashes on IDRIS/IBM SP6 with xlf 13.1.0.3, see ticket #761 !! ce We Unroll the loop and everything works fine DO jj = 1, jpj DO ji = 1, jpi ztmp(ji,jj) = 1. - AINT( frld(ji,jj), wp ) ! return 1 as soon as there is ice END DO END DO ! IF( iom_use('ice_pres') ) CALL iom_put( 'ice_pres', ztmp ) ! Ice presence [-] IF( iom_use('ist_ipa' ) ) CALL iom_put( 'ist_ipa' , ( sist(:,:) - rt0 ) * ztmp(:,:) ) ! Ice surface temperature [Celius] IF( iom_use('uice_ipa') ) CALL iom_put( 'uice_ipa', u_ice(:,:) * ztmp(:,:) ) ! Ice velocity along i-axis at I-point [m/s] IF( iom_use('vice_ipa') ) CALL iom_put( 'vice_ipa', v_ice(:,:) * ztmp(:,:) ) ! Ice velocity along j-axis at I-point [m/s] ENDIF IF(ln_ctl) THEN CALL prt_ctl_info(' lim_thd end ') CALL prt_ctl( tab2d_1=hicif , clinfo1=' lim_thd: hicif : ', tab2d_2=hsnif , clinfo2=' hsnif : ' ) CALL prt_ctl( tab2d_1=frld , clinfo1=' lim_thd: frld : ', tab2d_2=hicifp, clinfo2=' hicifp : ' ) CALL prt_ctl( tab2d_1=phicif , clinfo1=' lim_thd: phicif : ', tab2d_2=pfrld , clinfo2=' pfrld : ' ) CALL prt_ctl( tab2d_1=sist , clinfo1=' lim_thd: sist : ' ) CALL prt_ctl( tab2d_1=tbif(:,:,1), clinfo1=' lim_thd: tbif 1 : ' ) CALL prt_ctl( tab2d_1=tbif(:,:,2), clinfo1=' lim_thd: tbif 2 : ' ) CALL prt_ctl( tab2d_1=tbif(:,:,3), clinfo1=' lim_thd: tbif 3 : ' ) CALL prt_ctl( tab2d_1=fdtcn , clinfo1=' lim_thd: fdtcn : ', tab2d_2=qdtcn , clinfo2=' qdtcn : ' ) CALL prt_ctl( tab2d_1=qstoif , clinfo1=' lim_thd: qstoif : ', tab2d_2=fsbbq , clinfo2=' fsbbq : ' ) ENDIF ! CALL wrk_dealloc( jpi, jpj, ztmp, zqlbsbq, zlicegr, zdvosif, zdvobif, zdvolif, zdvonif, zdvomif, zu_imasstr, zv_imasstr ) CALL wrk_dealloc( jpi, jpj, jpk, zmsk ) ! END SUBROUTINE lim_thd_2 SUBROUTINE lim_thd_init_2 !!------------------------------------------------------------------- !! *** ROUTINE lim_thd_init_2 *** !! !! ** Purpose : Physical constants and parameters linked to the ice !! thermodynamics !! !! ** Method : Read the namicethd namelist and check the ice-thermo !! parameter values called at the first timestep (nit000) !! !! ** input : Namelist namicether !!------------------------------------------------------------------- INTEGER :: ios ! Local integer output status for namelist read NAMELIST/namicethd/ hmelt , hiccrit, hicmin, hiclim, amax , & & swiqst, sbeta , parlat, hakspl, hibspl, exld, & & hakdif, hnzst , thth , parsub, alphs !!------------------------------------------------------------------- REWIND( numnam_ice_ref ) ! Namelist namicethd in reference namelist : Ice thermodynamics READ ( numnam_ice_ref, namicethd, IOSTAT = ios, ERR = 901) 901 IF( ios /= 0 ) CALL ctl_nam ( ios , 'namicethd in reference namelist', lwp ) REWIND( numnam_ice_cfg ) ! Namelist namicethd in configuration namelist : Ice thermodynamics READ ( numnam_ice_cfg, namicethd, IOSTAT = ios, ERR = 902 ) 902 IF( ios /= 0 ) CALL ctl_nam ( ios , 'namicethd in configuration namelist', lwp ) IF(lwm) WRITE ( numoni, namicethd ) IF( lk_cpl .AND. parsub /= 0.0 ) CALL ctl_stop( 'In coupled mode, use parsub = 0. or send dqla' ) ! IF(lwp) THEN ! control print WRITE(numout,*) WRITE(numout,*)'lim_thd_init_2: ice parameters for ice thermodynamic computation ' WRITE(numout,*)'~~~~~~~~~~~~~~' WRITE(numout,*)' maximum melting at the bottom hmelt = ', hmelt WRITE(numout,*)' ice thick. for lateral accretion in NH (SH) hiccrit(1/2) = ', hiccrit WRITE(numout,*)' ice thick. corr. to max. energy stored in brine pocket hicmin = ', hicmin WRITE(numout,*)' minimum ice thickness hiclim = ', hiclim WRITE(numout,*)' maximum lead fraction amax = ', amax WRITE(numout,*)' energy stored in brine pocket (=1) or not (=0) swiqst = ', swiqst WRITE(numout,*)' numerical carac. of the scheme for diffusion in ice ' WRITE(numout,*)' Cranck-Nicholson (=0.5), implicit (=1), explicit (=0) sbeta = ', sbeta WRITE(numout,*)' percentage of energy used for lateral ablation parlat = ', parlat WRITE(numout,*)' slope of distr. for Hakkinen-Mellor lateral melting hakspl = ', hakspl WRITE(numout,*)' slope of distribution for Hibler lateral melting hibspl = ', hibspl WRITE(numout,*)' exponent for leads-closure rate exld = ', exld WRITE(numout,*)' coefficient for diffusions of ice and snow hakdif = ', hakdif WRITE(numout,*)' threshold thick. for comp. of eq. thermal conductivity zhth = ', thth WRITE(numout,*)' thickness of the surf. layer in temp. computation hnzst = ', hnzst WRITE(numout,*)' switch for snow sublimation (=1) or not (=0) parsub = ', parsub WRITE(numout,*)' coefficient for snow density when snow ice formation alphs = ', alphs ENDIF ! uscomi = 1.0 / ( 1.0 - amax ) ! inverse of minimum lead fraction rcdsn = hakdif * rcdsn rcdic = hakdif * rcdic ! IF( hsndif > 100.e0 .OR. hicdif > 100.e0 ) THEN cnscg = 0.e0 ELSE cnscg = rcpsn / rcpic ! ratio rcpsn/rcpic ENDIF ! END SUBROUTINE lim_thd_init_2 #else !!---------------------------------------------------------------------- !! Default option Dummy module NO LIM 2.0 sea-ice model !!---------------------------------------------------------------------- CONTAINS SUBROUTINE lim_thd_2 ! Dummy routine END SUBROUTINE lim_thd_2 #endif !!====================================================================== END MODULE limthd_2