Changes between Version 12 and Version 13 of 2014WP/Met_Office
- Timestamp:
- 2014-01-15T18:20:55+01:00 (10 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
2014WP/Met_Office
v12 v13 46 46 * Write documentation 47 47 48 '''Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' September 2014[[BR]] ''' Priority:''' Medium[[BR]] ''' Depends on:''' N/A[[BR]] ''' Principal Investigator : '''Pierre Mathiot ([mailto:piethi@bas.ac.uk])48 '''Science Reviewer:''' Dave Storkey [[BR]] ''' System Reviewer:''' Dave Storkey [[BR]] ''' Deadline:''' September 2014[[BR]] ''' Priority:''' Medium[[BR]] ''' Depends on:''' N/A[[BR]] ''' Principal Investigator : '''Pierre Mathiot ([mailto:piethi@bas.ac.uk]) 49 49 50 50 === '''Met_Office-3 - Masked damping''' === 51 ''' Motivation: '''To allow generic damping in specific regions[[BR]] ''' Status :''' Code exists at vn3.4[[BR]] ''' Main tasks :''' Module will be developed to damp Temperature & Salinity in any region specified using a mask read in from a netcdf file. The module will be developed outside of the current tradmp module to avoid conflicts with the hard coded resolution dependent regional variations to the damping that are currently implemented in this module. Regional variations to the damping will be permitted by specifying values of the mask between zero and one where zero indicates no damping at that grid point and non-zero values indicate damping with a relaxation coefficient value obtained by multiplying the mask value with a namelist specified max relaxation coefficient. [[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' September 2014[[BR]] ''' Priority:''' Medium[[BR]] ''' Depends on:''' N/A[[BR]] ''' Principal Investigator : '''Tim Graham (tim.graham@metoffice.gov.uk)51 ''' Motivation: '''To allow generic damping in specific regions[[BR]] ''' Status :''' Code exists at vn3.4[[BR]] ''' Main tasks :''' Module will be developed to damp Temperature & Salinity in any region specified using a mask read in from a netcdf file. The module will be developed outside of the current tradmp module to avoid conflicts with the hard coded resolution dependent regional variations to the damping that are currently implemented in this module. Regional variations to the damping will be permitted by specifying values of the mask between zero and one where zero indicates no damping at that grid point and non-zero values indicate damping with a relaxation coefficient value obtained by multiplying the mask value with a namelist specified max relaxation coefficient. [[BR]] ''' Science Reviewer:''' Clement Bricaud [[BR]] ''' System Reviewer:''' Clement Bricaud [[BR]] ''' Deadline:''' September 2014[[BR]] ''' Priority:''' Medium[[BR]] ''' Depends on:''' N/A[[BR]] ''' Principal Investigator : '''Tim Graham (tim.graham@metoffice.gov.uk) 52 52 53 53 === '''Met_Office-4 - Ensure CF/MOCF compliance and implement CMIP5 diagnostics''' === 54 ''' Motivation: '''Standardization of output to meet CF and MOCF compliance and addition of CMIP5 diagnostics in XIOS[[BR]] ''' Status :''' Not started[[BR]] ''' Main tasks :''' Necessary NEMO-side code modifications where XIOS does not support the required changes (and there are no plans to)[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014 (but depends on CMIP5 and UKMO requirements) [[BR]] ''' Priority:''' [[BR]] ''' Depends on:''' Feedback from Alistair Sellar (UKMO), Matt Palmer(UKMO) & others[[BR]] ''' Principal Investigator : '''Daley Calvert (daley.calvert@metoffice.gov.uk)54 ''' Motivation: '''Standardization of output to meet CF and MOCF compliance and addition of CMIP5 diagnostics in XIOS[[BR]] ''' Status :''' Not started[[BR]] ''' Main tasks :''' Necessary NEMO-side code modifications where XIOS does not support the required changes (and there are no plans to)[[BR]] ''' Science Reviewer:''' Sebastien Masson [[BR]] ''' System Reviewer:''' Sebastien Masson [[BR]] ''' Deadline:''' October 2014 (but depends on CMIP5 and UKMO requirements) [[BR]] ''' Priority:''' [[BR]] ''' Depends on:''' Feedback from Alistair Sellar (UKMO), Matt Palmer(UKMO) & others[[BR]] ''' Principal Investigator : '''Daley Calvert (daley.calvert@metoffice.gov.uk) 55 55 56 56 === '''Met_Office-5 - Kara mixed layer diagnostic''' === 57 ''' Motivation: '''Add the Kara et al. variable density criterion MLD diagnostic to allow comparison with their MLD climatology[[BR]] ''' Status :''' Has existed in a local UKMO branch for sometime, but needs updating, and retesting[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Daley Calvert (daley.calvert@metoffice.gov.uk)57 ''' Motivation: '''Add the Kara et al. variable density criterion MLD diagnostic to allow comparison with their MLD climatology[[BR]] ''' Status :''' Has existed in a local UKMO branch for sometime, but needs updating, and retesting[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version[[BR]] ''' Science Reviewer:''' Paolo Oddo [[BR]] ''' System Reviewer:''' Paolo Oddo [[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Daley Calvert (daley.calvert@metoffice.gov.uk) 58 58 59 59 === '''Met_Office-6 - Sponge Layer at open boundaries''' === 60 ''' Motivation: ''' Add the sponge layer (region of increased lateral viscosity) near open boundaries as an option in BDY[[BR]] ''' Status :''' Has existed in a local branch for a while[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do)[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Dave Storkey (dave.storkey@metoffice.gov.uk)60 ''' Motivation: ''' Add the sponge layer (region of increased lateral viscosity) near open boundaries as an option in BDY[[BR]] ''' Status :''' Has existed in a local branch for a while[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version[[BR]] ''' Science Reviewer:''' Jerome Chanut [[BR]] ''' System Reviewer:''' Jerome Chanut [[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do)[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Dave Storkey (dave.storkey@metoffice.gov.uk) 61 61 62 62 === '''Met_Office-7 - Allow specification of an hour start time''' === … … 64 64 65 65 === '''Met_Office-8 - Inclusion of surface wave effects in NEMO''' === 66 ''' Motivation: '''Modifying NEMO SBC to include wave-induced mixing and Langmuir circulation with data obtained from a surface wave model and modifying the equation of motion to include Stokes-Coriolis forcing[[BR]] ''' Status :''' Not started[[BR]] ''' Main tasks :''' NEMO-side code modifications to read/couple wave fields and modifications in the TKE scheme and dynamics module[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Francois-Xavier Bocquet (francois.bocquet@metoffice.gov.uk)66 ''' Motivation: '''Modifying NEMO SBC to include wave-induced mixing and Langmuir circulation with data obtained from a surface wave model and modifying the equation of motion to include Stokes-Coriolis forcing[[BR]] ''' Status :''' Not started[[BR]] ''' Main tasks :''' NEMO-side code modifications to read/couple wave fields and modifications in the TKE scheme and dynamics module[[BR]] ''' Science Reviewer:''' Done within wave working group [[BR]] ''' System Reviewer:''' Done within wave working group [[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Francois-Xavier Bocquet (francois.bocquet@metoffice.gov.uk) 67 67 68 68 === '''Met_Office-9 - Further 1D configuration changes''' === 69 ''' Motivation: '''Add further functionality that there wasn't time for in the 2013 development[[BR]] ''' Status :''' Plan exists[[BR]] ''' Main tasks :''' Add namelist domain control, case studies, maybe remove CPP key dependence.[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Daley Calvert (daley.calvert@metoffice.gov.uk)69 ''' Motivation: '''Add further functionality that there wasn't time for in the 2013 development[[BR]] ''' Status :''' Plan exists[[BR]] ''' Main tasks :''' Add namelist domain control, case studies, maybe remove CPP key dependence.[[BR]] ''' Science Reviewer:''' Romain Bourdalle-Badie [[BR]] ''' System Reviewer:''' Romain Bourdalle-Badie [[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Daley Calvert (daley.calvert@metoffice.gov.uk) 70 70 71 71 === '''Met_Office-10 - Tidally meaned diagnostics''' === 72 ''' Motivation: '''Implementing 25 hour means (an average of 25 instantaneous hourly values, midnight to midnight, so each midnight is included for both the day preceding it, and the day following it) provides a simple way of detiding model runs as it largely averages out the main M2 tidal signal. These outputs give a rough idea of the residual flows, mean ssh etc. on a particular day [[BR]] '''Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Enda O'Dea (enda.odea@metoffice.gov.uk)72 ''' Motivation: '''Implementing 25 hour means (an average of 25 instantaneous hourly values, midnight to midnight, so each midnight is included for both the day preceding it, and the day following it) provides a simple way of detiding model runs as it largely averages out the main M2 tidal signal. These outputs give a rough idea of the residual flows, mean ssh etc. on a particular day [[BR]] '''Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' Sebastien Masson [[BR]] ''' System Reviewer:''' Sebastien Masson [[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Enda O'Dea (enda.odea@metoffice.gov.uk) 73 73 74 74 === '''Met_Office-11 - Outputting restarts at specified times instead of specified frequency''' === 75 ''' Motivation: '''Operationally we require the flexibility to output restarts at specified times rather than at a specified frequency. This used to be an option in the NEMO trunk but disappeared at v3.0 and we have been maintaining the required code since then. The code uses the nstocklist functionality.[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Ed Blockley (ed.blockley@metoffice.gov.uk)75 ''' Motivation: '''Operationally we require the flexibility to output restarts at specified times rather than at a specified frequency. This used to be an option in the NEMO trunk but disappeared at v3.0 and we have been maintaining the required code since then. The code uses the nstocklist functionality.[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' Gilles Garric [[BR]] ''' System Reviewer:''' Gilles Garric [[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''Ed Blockley (ed.blockley@metoffice.gov.uk) 76 76 77 77 === '''Met_Office-12 - CFL diagnostic''' === … … 87 87 === '''Met_Office-14 - Updates and Improvements to OBS and ASM''' === 88 88 '''Met Office 14.1 - Equatorial Pressure correction'''[[BR]] 89 ''' Motivation: '''The pressure correction code exists to maintain balance in equatorial regions as data are assimilated[[BR]] ''' Status :''' The code already exits, but still needs to be reviewed[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' Dan Lea (daniel.lea@metoffice.gov.uk)89 ''' Motivation: '''The pressure correction code exists to maintain balance in equatorial regions as data are assimilated[[BR]] ''' Status :''' The code already exits, but still needs to be reviewed[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version[[BR]] ''' Science Reviewer:''' NEMOVAR community [[BR]] ''' System Reviewer:''' NEMOVAR community [[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' Dan Lea (daniel.lea@metoffice.gov.uk) 90 90 91 91 '''Met_Office-14.2 - Seaice increments'''[[BR]] 92 ''' Motivation: '''Implement code used to apply seaice increments; this is used for data assimilation of ice variables. It will also be necessary to make sure the code is compatible with cice[[BR]] ''' Status : ''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) '''''[[BR]] ''' '''''Priority:''' Medium [[BR]] '''Depends on''': N/A [[BR]] '''Principal Investigator :''' Dan Lea (daniel.lea@metoffice.gov.uk)92 ''' Motivation: '''Implement code used to apply seaice increments; this is used for data assimilation of ice variables. It will also be necessary to make sure the code is compatible with cice[[BR]] ''' Status : ''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' NEMOVAR community [[BR]] ''' System Reviewer:''' NEMOVAR community [[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) '''''[[BR]] ''' '''''Priority:''' Medium [[BR]] '''Depends on''': N/A [[BR]] '''Principal Investigator :''' Dan Lea (daniel.lea@metoffice.gov.uk) 93 93 94 94 '''Met_Office-14.3 - Temperature Criterion Mixed Layer''' [[BR]] 95 ''' Motivation: ''' A new mixed layer definition based on a temperature criterion[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''James While (james.while@metoffice.gov.uk)95 ''' Motivation: ''' A new mixed layer definition based on a temperature criterion[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' Paolo Oddo [[BR]] ''' System Reviewer:''' Paolo Oddo [[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : '''James While (james.while@metoffice.gov.uk) 96 96 97 97 '''Met_Office-14.4 - Observation operator for profiles for use with all vertical coordinates (i.e. generalised vertical interpolation) '''[[BR]] 98 ''' Motivation: '''This code is necessary to get profile minus model differences in any model not using vertical z-coordinates[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk)98 ''' Motivation: '''This code is necessary to get profile minus model differences in any model not using vertical z-coordinates[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' NEMOVAR community [[BR]] ''' System Reviewer:''' NEMOVAR community [[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk) 99 99 100 100 '''Met_Office-14.5 - SST bias correction''' [[BR]] 101 ''' Motivation: ''' This code reads in a bias field and uses it to correct SST observations before they are passed to the obs operator. It is necessary for successful SST assimilation[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk)101 ''' Motivation: ''' This code reads in a bias field and uses it to correct SST observations before they are passed to the obs operator. It is necessary for successful SST assimilation[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' NEMOVAR community [[BR]] ''' System Reviewer:''' NEMOVAR community [[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk) 102 102 103 103 '''Met_Office-14.6 - ADCP data to be included in OBS routines''' [[BR]] 104 ''' Motivation: ''' Reads current data from ADCP files for comparison with model data[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk)104 ''' Motivation: ''' Reads current data from ADCP files for comparison with model data[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' NEMOVAR community [[BR]] ''' System Reviewer:''' NEMOVAR community [[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk) 105 105 106 106 '''Met_Office-14.7 - Read and process gridded seaice and sst data''' [[BR]] 107 ''' Motivation: ''' This code would allow us to process gridded SST and seaice data through the observation operator[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk)107 ''' Motivation: ''' This code would allow us to process gridded SST and seaice data through the observation operator[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' NEMOVAR community [[BR]] ''' System Reviewer:''' NEMOVAR community [[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk) 108 108 109 109 '''Met_Office-14.8 - Netcdf4 compression of feedback files''' [[BR]] 110 ''' Motivation: '''This code would allow us to more easily store feedback files at a higher compression[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk)110 ''' Motivation: '''This code would allow us to more easily store feedback files at a higher compression[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' NEMOVAR community [[BR]] ''' System Reviewer:''' NEMOVAR community [[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk) 111 111 112 112 '''Met_Office-14.9 - Add record information to SLA data''' [[BR]] 113 ''' Motivation: '''Allows storage of record information for SLA data[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk)113 ''' Motivation: '''Allows storage of record information for SLA data[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' NEMOVAR community [[BR]] ''' System Reviewer:''' NEMOVAR community [[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' James While (james.while@metoffice.gov.uk) 114 114 115 115 '''Met_Office-14.10 - Addition of Satellite Surface Salinity data and Microwave SST data to OBS routines''' [[BR]] 116 ''' Motivation: '''Allow comparison of satellite surface salinity and microwave SST data through the OBS routines.[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' Dan Lea (daniel.lea@metoffice.gov.uk) (work to be done with Niall [wiki:McConner McConnell and Jonah Roberts Jones)]116 ''' Motivation: '''Allow comparison of satellite surface salinity and microwave SST data through the OBS routines.[[BR]] ''' Status :''' The code exits in a local branch at vn3.4[[BR]] ''' Main tasks :''' Check the existing code and implement in the appropriate NEMO version, test and document[[BR]] ''' Science Reviewer:''' NEMOVAR community [[BR]] ''' System Reviewer:''' NEMOVAR community [[BR]] ''' Deadline:''' October 2014[[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' Dan Lea (daniel.lea@metoffice.gov.uk) (work to be done with Niall [wiki:McConner McConnell and Jonah Roberts Jones)] 117 117 118 118 '''Met_Office-14.11 - Implement assimilation interface SETTE test''' [[BR]] … … 123 123 1. If not add additional diagnostic text output. 124 124 125 ''' Science Reviewer:'''Simona Flavoni Cadot ?[[BR]] ''' System Reviewer:'''Simona Flavoni Cadot?[[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' Dan Lea (daniel.lea@metoffice.gov.uk)125 ''' Science Reviewer:'''Simona Flavoni Cadot[[BR]] ''' System Reviewer:'''Simona Flavoni Cadot[[BR]] ''' Deadline:''' October 2014 (likely sooner since there is little to do) [[BR]] ''' Priority:''' Medium [[BR]] ''' Depends on: '''N/A [[BR]] ''' Principal Investigator : ''' Dan Lea (daniel.lea@metoffice.gov.uk) 126 126 127 127 '''Met_Office-14.12 - Improvements to offline OBS operator''' [[BR]] … … 133 133 134 134 === '''Met_Office-16 - Overflow Parameterisations''' === 135 ''' Motivation: '''Currently the model fails to properly capture dense water formation and the asociated flows over sills, especially in z cooridnate models. This coukd be improved by parameterising the process[[BR]] ''' Status :''' Some investigative work has begun[[BR]] ''' Main tasks :''' To assess the various options available with a view to implement a parameterisation in NEMO[[BR]] ''' Science Reviewer:''' [[BR]] ''' System Reviewer:'''[[BR]] ''' Deadline:''' Ongoing, possibly November 2015[[BR]] ''' Priority:''' Medium[[BR]] ''' Depends on:''' N/A[[BR]] ''' Principal Investigator : '''Tim Graham (tim.graham@metoffice.gov.uk)135 ''' Motivation: '''Currently the model fails to properly capture dense water formation and the asociated flows over sills, especially in z cooridnate models. This coukd be improved by parameterising the process[[BR]] ''' Status :''' Some investigative work has begun[[BR]] ''' Main tasks :''' To assess the various options available with a view to implement a parameterisation in NEMO[[BR]] ''' Science Reviewer:''' N/A [[BR]] ''' System Reviewer:''' N/A [[BR]] ''' Deadline:''' Ongoing, possibly November 2015[[BR]] ''' Priority:''' Medium[[BR]] ''' Depends on:''' N/A[[BR]] ''' Principal Investigator : '''Tim Graham (tim.graham@metoffice.gov.uk)
