{{{ svn copy svn+ssh://acc@forge.ipsl.jussieu.fr/ipsl/forge/projets/nemo/svn/trunk \ svn+ssh://acc@forge.ipsl.jussieu.fr/ipsl/forge/projets/nemo/svn/branches/2015/dev_r5087_NOC2_JATTR \ -m"#1472. Temporary development branch for testing use of file attributes to control starting j-row from input netcdf files" Committed revision 5088. svn co svn+ssh://acc@forge.ipsl.jussieu.fr/ipsl/forge/projets/nemo/svn/branches/2015/dev_r5087_NOC2_JATTR }}} Submitted first stage changes (introduces option for bathymetry and coordinates only). These changes have been preliminarily tested in an ORCA1 configuration using the extended grid bathymetry and coordinate files: {{{ eORCA1_bathymetry_v2.nc eORCA1_coordinates.nc }}} These files define a horizontal domain of 362x332. The first row with open ocean wet points in the non-isf bathymetry for this set is row 41 (Fortran indexing) so the formally correct setting for open_ocean_jstart would be 40. However this results in a 362x293 domain which is one row larger than the original ORCA1 domain. In order to test this configuration with all the old forcing fields, initial conditions and weights, I set the attribute to 41 instead. NEMO fills the first row with land anyway (and there are only a couple of wet points lost) so the resulting configuration is a valid test. Full instructions for configuring this test are: 1. Add the new attribute to any input files requiring a j-row offset, i.e: {{{ ncatted -a open_ocean_jstart,global,a,d,41 eORCA1_coordinates.nc ncatted -a open_ocean_jstart,global,a,d,41 eORCA1_bathymetry_v2.nc }}} 2. Add the logical switch to namcfg in the cfg namelist and set true: {{{ !----------------------------------------------------------------------- &namcfg ! parameters of the configuration !----------------------------------------------------------------------- cp_cfg = "orca" ! name of the configuration jp_cfg = 1 ! resolution of the configuration jpidta = 362 ! 1st lateral dimension ( >= jpi ) jpjdta = 292 ! 2nd " " ( >= jpj ) jpkdta = 75 ! number of levels ( >= jpk ) jpiglo = 362 ! 1st dimension of global domain --> i =jpidta jpjglo = 292 ! 2nd - - --> j =jpjdta jperio = 6 ! lateral cond. type (between 0 and 6) ln_use_jattr = .true. ! use (T) the file attribute: open_ocean_jstart if present }}} Note the j-size of the global domain is the (extended j-size minus open_ocean_jstart + 1 ) and this must match the size of all datasets other than bathymetry and coordinates currently. However the option can be extended to any global, 2D and 3D, netcdf, input field by adding the: {{{ lrowattr=ln_use_jattr }}} optional argument to the appropriate iom_get call and the open_ocean_jstart attribute to the input files. {{{ svn ci -m"#1472. Branch dev_r5087_NOC2_JATTR. Submit first working version tested with ORCA1 extended grids. See wiki:ticket/1472_NOC2_JATTR for usage example" Sending NEMOGCM/CONFIG/SHARED/namelist_ref Sending NEMOGCM/NEMO/OFF_SRC/nemogcm.F90 Sending NEMOGCM/NEMO/OOO_SRC/nemogcm.F90 Sending NEMOGCM/NEMO/OPA_SRC/DOM/domhgr.F90 Sending NEMOGCM/NEMO/OPA_SRC/DOM/domzgr.F90 Sending NEMOGCM/NEMO/OPA_SRC/IOM/iom.F90 Sending NEMOGCM/NEMO/OPA_SRC/LBC/mppini_2.h90 Sending NEMOGCM/NEMO/OPA_SRC/nemogcm.F90 Sending NEMOGCM/NEMO/OPA_SRC/par_oce.F90 Sending NEMOGCM/NEMO/SAS_SRC/nemogcm.F90 Transmitting file data .......... Committed revision 5089. svn diff Index: CONFIG/SHARED/namelist_ref =================================================================== --- CONFIG/SHARED/namelist_ref (revision 5088) +++ CONFIG/SHARED/namelist_ref (working copy) @@ -75,6 +75,8 @@ ! = 4 cyclic East-West AND North fold T-point pivot ! = 5 North fold F-point pivot ! = 6 cyclic East-West AND North fold F-point pivot + ln_use_jattr = .false. ! use (T) the file attribute: open_ocean_jstart, if present + ! in netcdf input files, as the start j-row for reading / !----------------------------------------------------------------------- &namzgr ! vertical coordinate Index: NEMO/OFF_SRC/nemogcm.F90 =================================================================== --- NEMO/OFF_SRC/nemogcm.F90 (revision 5088) +++ NEMO/OFF_SRC/nemogcm.F90 (working copy) @@ -148,7 +148,7 @@ & nn_isplt, nn_jsplt, nn_jctls, nn_jctle, & & nn_bench, nn_timing NAMELIST/namcfg/ cp_cfg, cp_cfz, jp_cfg, jpidta, jpjdta, jpkdta, jpiglo, jpjglo, & - & jpizoom, jpjzoom, jperio + & jpizoom, jpjzoom, jperio, ln_use_jattr !!---------------------------------------------------------------------- cltxt = '' ! @@ -358,6 +358,7 @@ WRITE(numout,*) ' left bottom i index of the zoom (in data domain) jpizoom = ', jpizoom WRITE(numout,*) ' left bottom j index of the zoom (in data domain) jpizoom = ', jpjzoom WRITE(numout,*) ' lateral cond. type (between 0 and 6) jperio = ', jperio + WRITE(numout,*) ' use file attribute if exists as i/p j-start ln_use_jattr = ', ln_use_jattr ENDIF ! ! Parameter control ! Index: NEMO/OOO_SRC/nemogcm.F90 =================================================================== --- NEMO/OOO_SRC/nemogcm.F90 (revision 5088) +++ NEMO/OOO_SRC/nemogcm.F90 (working copy) @@ -128,7 +128,7 @@ & nn_isplt, nn_jsplt, nn_jctls, nn_jctle, & & nn_bench, nn_timing NAMELIST/namcfg/ cp_cfg, cp_cfz, jp_cfg, jpidta, jpjdta, jpkdta, jpiglo, jpjglo, & - & jpizoom, jpjzoom, jperio + & jpizoom, jpjzoom, jperio, ln_use_jattr !!---------------------------------------------------------------------- ! cltxt = '' Index: NEMO/OPA_SRC/DOM/domhgr.F90 =================================================================== --- NEMO/OPA_SRC/DOM/domhgr.F90 (revision 5088) +++ NEMO/OPA_SRC/DOM/domhgr.F90 (working copy) @@ -615,25 +615,25 @@ CALL iom_open( 'coordinates', inum ) - CALL iom_get( inum, jpdom_data, 'glamt', glamt ) - CALL iom_get( inum, jpdom_data, 'glamu', glamu ) - CALL iom_get( inum, jpdom_data, 'glamv', glamv ) - CALL iom_get( inum, jpdom_data, 'glamf', glamf ) + CALL iom_get( inum, jpdom_data, 'glamt', glamt, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'glamu', glamu, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'glamv', glamv, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'glamf', glamf, lrowattr=ln_use_jattr ) - CALL iom_get( inum, jpdom_data, 'gphit', gphit ) - CALL iom_get( inum, jpdom_data, 'gphiu', gphiu ) - CALL iom_get( inum, jpdom_data, 'gphiv', gphiv ) - CALL iom_get( inum, jpdom_data, 'gphif', gphif ) + CALL iom_get( inum, jpdom_data, 'gphit', gphit, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'gphiu', gphiu, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'gphiv', gphiv, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'gphif', gphif, lrowattr=ln_use_jattr ) - CALL iom_get( inum, jpdom_data, 'e1t', e1t ) - CALL iom_get( inum, jpdom_data, 'e1u', e1u ) - CALL iom_get( inum, jpdom_data, 'e1v', e1v ) - CALL iom_get( inum, jpdom_data, 'e1f', e1f ) + CALL iom_get( inum, jpdom_data, 'e1t', e1t, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'e1u', e1u, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'e1v', e1v, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'e1f', e1f, lrowattr=ln_use_jattr ) - CALL iom_get( inum, jpdom_data, 'e2t', e2t ) - CALL iom_get( inum, jpdom_data, 'e2u', e2u ) - CALL iom_get( inum, jpdom_data, 'e2v', e2v ) - CALL iom_get( inum, jpdom_data, 'e2f', e2f ) + CALL iom_get( inum, jpdom_data, 'e2t', e2t, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'e2u', e2u, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'e2v', e2v, lrowattr=ln_use_jattr ) + CALL iom_get( inum, jpdom_data, 'e2f', e2f, lrowattr=ln_use_jattr ) CALL iom_close( inum ) Index: NEMO/OPA_SRC/DOM/domzgr.F90 =================================================================== --- NEMO/OPA_SRC/DOM/domzgr.F90 (revision 5088) +++ NEMO/OPA_SRC/DOM/domzgr.F90 (working copy) @@ -533,7 +533,11 @@ ENDIF IF( ln_zps .OR. ln_sco ) THEN ! zps or sco : read meter bathymetry CALL iom_open ( 'bathy_meter.nc', inum ) - CALL iom_get ( inum, jpdom_data, 'Bathymetry', bathy ) + IF ( ln_isfcav ) THEN + CALL iom_get ( inum, jpdom_data, 'Bathymetry_isf', bathy, lrowattr=.false. ) + ELSE + CALL iom_get ( inum, jpdom_data, 'Bathymetry' , bathy, lrowattr=ln_use_jattr ) + END IF CALL iom_close( inum ) ! risfdep(:,:)=0._wp Index: NEMO/OPA_SRC/IOM/iom.F90 =================================================================== --- NEMO/OPA_SRC/IOM/iom.F90 (revision 5088) +++ NEMO/OPA_SRC/IOM/iom.F90 (working copy) @@ -542,7 +542,7 @@ ENDIF END SUBROUTINE iom_g1d - SUBROUTINE iom_g2d( kiomid, kdom, cdvar, pvar, ktime, kstart, kcount ) + SUBROUTINE iom_g2d( kiomid, kdom, cdvar, pvar, ktime, kstart, kcount, lrowattr ) INTEGER , INTENT(in ) :: kiomid ! Identifier of the file INTEGER , INTENT(in ) :: kdom ! Type of domain to be read CHARACTER(len=*), INTENT(in ) :: cdvar ! Name of the variable @@ -550,14 +550,19 @@ INTEGER , INTENT(in ) , OPTIONAL :: ktime ! record number INTEGER , INTENT(in ), DIMENSION(2) , OPTIONAL :: kstart ! start axis position of the reading INTEGER , INTENT(in ), DIMENSION(2) , OPTIONAL :: kcount ! number of points in each axis + LOGICAL , INTENT(in ) , OPTIONAL :: lrowattr ! logical flag telling iom_get to + ! look for and use a file attribute + ! called open_ocean_jstart to set the start + ! value for the 2nd dimension (netcdf only) ! IF( kiomid > 0 ) THEN IF( iom_file(kiomid)%nfid > 0 ) CALL iom_get_123d( kiomid, kdom , cdvar , pv_r2d=pvar, & - & ktime=ktime, kstart=kstart, kcount=kcount ) + & ktime=ktime, kstart=kstart, kcount=kcount, & + & lrowattr=lrowattr ) ENDIF END SUBROUTINE iom_g2d - SUBROUTINE iom_g3d( kiomid, kdom, cdvar, pvar, ktime, kstart, kcount ) + SUBROUTINE iom_g3d( kiomid, kdom, cdvar, pvar, ktime, kstart, kcount, lrowattr ) INTEGER , INTENT(in ) :: kiomid ! Identifier of the file INTEGER , INTENT(in ) :: kdom ! Type of domain to be read CHARACTER(len=*), INTENT(in ) :: cdvar ! Name of the variable @@ -565,17 +570,23 @@ INTEGER , INTENT(in ) , OPTIONAL :: ktime ! record number INTEGER , INTENT(in ), DIMENSION(3) , OPTIONAL :: kstart ! start axis position of the reading INTEGER , INTENT(in ), DIMENSION(3) , OPTIONAL :: kcount ! number of points in each axis + LOGICAL , INTENT(in ) , OPTIONAL :: lrowattr ! logical flag telling iom_get to + ! look for and use a file attribute + ! called open_ocean_jstart to set the start + ! value for the 2nd dimension (netcdf only) ! IF( kiomid > 0 ) THEN IF( iom_file(kiomid)%nfid > 0 ) CALL iom_get_123d( kiomid, kdom , cdvar , pv_r3d=pvar, & - & ktime=ktime, kstart=kstart, kcount=kcount ) + & ktime=ktime, kstart=kstart, kcount=kcount, & + & lrowattr=lrowattr ) ENDIF END SUBROUTINE iom_g3d !!---------------------------------------------------------------------- SUBROUTINE iom_get_123d( kiomid, kdom , cdvar , & & pv_r1d, pv_r2d, pv_r3d, & - & ktime , kstart, kcount ) + & ktime , kstart, kcount, & + & lrowattr ) !!----------------------------------------------------------------------- !! *** ROUTINE iom_get_123d *** !! @@ -592,8 +603,14 @@ INTEGER , INTENT(in ), OPTIONAL :: ktime ! record number INTEGER , DIMENSION(:) , INTENT(in ), OPTIONAL :: kstart ! start position of the reading in each axis INTEGER , DIMENSION(:) , INTENT(in ), OPTIONAL :: kcount ! number of points to be read in each axis + LOGICAL , INTENT(in ), OPTIONAL :: lrowattr ! logical flag telling iom_get to + ! look for and use a file attribute + ! called open_ocean_jstart to set the start + ! value for the 2nd dimension (netcdf only) ! LOGICAL :: llnoov ! local definition to read overlap + LOGICAL :: luse_jattr ! local definition to read open_ocean_jstart file attribute + INTEGER :: jstartrow ! start point for 2nd dimension optionally set by file attribute INTEGER :: jl ! loop on number of dimension INTEGER :: idom ! type of domain INTEGER :: idvar ! id of the variable @@ -603,7 +620,7 @@ INTEGER :: istop ! temporary value of nstop INTEGER :: ix1, ix2, iy1, iy2 ! subdomain indexes INTEGER :: ji, jj ! loop counters - INTEGER :: irankpv ! + INTEGER :: irankpv ! INTEGER :: ind1, ind2 ! substring index INTEGER, DIMENSION(jpmax_dims) :: istart ! starting point to read for each axis INTEGER, DIMENSION(jpmax_dims) :: icnt ! number of value to read along each axis @@ -628,6 +645,23 @@ IF( PRESENT(kstart) .AND. (.NOT. PRESENT(kcount)) ) CALL ctl_stop(trim(clinfo), 'kstart present needs kcount present') IF( PRESENT(kstart) .AND. idom /= jpdom_unknown ) CALL ctl_stop(trim(clinfo), 'kstart present needs kdom = jpdom_unknown') + luse_jattr = .false. + IF( PRESENT(lrowattr) ) THEN + IF( lrowattr .AND. idom /= jpdom_data ) CALL ctl_stop(trim(clinfo), 'lrowattr present and true needs kdom = jpdom_data') + IF( lrowattr .AND. idom == jpdom_data ) luse_jattr = .true. + ENDIF + IF( luse_jattr ) THEN + SELECT CASE (iom_file(kiomid)%iolib) + CASE (jpioipsl, jprstdimg ) + CALL ctl_warn(trim(clinfo), 'lrowattr present and true but this only works with netcdf (jpnf90)') + luse_jattr = .false. + CASE (jpnf90 ) + ! Ok + CASE DEFAULT + CALL ctl_stop( TRIM(clinfo)//' accepted IO library are only jpioipsl, jpnf90 and jprstdimg' ) + END SELECT + ENDIF + ! Search for the variable in the data base (eventually actualize data) istop = nstop idvar = iom_varid( kiomid, cdvar ) @@ -700,8 +734,14 @@ IF( idom == jpdom_unknown ) THEN ; icnt(1:idmspc) = idimsz(1:idmspc) ELSE IF( .NOT. PRESENT(pv_r1d) ) THEN ! not a 1D array - IF( idom == jpdom_data ) THEN ; istart(1:2) = (/ mig(1), mjg(1) /) ! icnt(1:2) done bellow - ELSEIF( idom == jpdom_global ) THEN ; istart(1:2) = (/ nimpp , njmpp /) ! icnt(1:2) done bellow + IF( idom == jpdom_data ) THEN + jstartrow = 1 + IF( luse_jattr ) THEN + CALL iom_getatt(kiomid, 'open_ocean_jstart', jstartrow ) ! -999 is returned if the attribute is not found + jstartrow = MAX(1,jstartrow) + ENDIF + istart(1:2) = (/ mig(1), mjg(1) + jstartrow - 1 /) ! icnt(1:2) done below + ELSEIF( idom == jpdom_global ) THEN ; istart(1:2) = (/ nimpp , njmpp /) ! icnt(1:2) done below ENDIF ! we do not read the overlap -> we start to read at nldi, nldj ! JMM + SM: ugly patch before getting the new version of lib_mpp) Index: NEMO/OPA_SRC/LBC/mppini_2.h90 =================================================================== --- NEMO/OPA_SRC/LBC/mppini_2.h90 (revision 5088) +++ NEMO/OPA_SRC/LBC/mppini_2.h90 (working copy) @@ -44,6 +44,7 @@ INTEGER :: ji, jj, jn, jproc, jarea ! dummy loop indices INTEGER :: inum ! temporary logical unit INTEGER :: idir ! temporary integers + INTEGER :: jstartrow ! temporary integers INTEGER :: ios ! Local integer output status for namelist read INTEGER :: & ii, ij, ifreq, il1, il2, & ! temporary integers @@ -99,13 +100,26 @@ ! open the file ! Remember that at this level in the code, mpp is not yet initialized, so - ! the file must be open with jpdom_unknown, and kstart amd kcount forced + ! the file must be open with jpdom_unknown, and kstart and kcount forced + jstartrow = 1 IF ( ln_zco ) THEN CALL iom_open ( 'bathy_level.nc', inum ) ! Level bathymetry - CALL iom_get ( inum, jpdom_unknown, 'Bathy_level', zdta, kstart=(/jpizoom,jpjzoom/), kcount=(/jpiglo,jpjglo/) ) + ! Optionally use a file attribute (open_ocean_jstart) to set a start row for reading from the global file + ! This allows the unextended grid bathymetry to be stored in the same file as the under ice-shelf extended bathymetry + CALL iom_getatt(inum, 'open_ocean_jstart', jstartrow ) ! -999 is returned if the attribute is not found + jstartrow = MAX(1,jstartrow) + CALL iom_get ( inum, jpdom_unknown, 'Bathy_level', zdta, kstart=(/jpizoom,jpjzoom+jstartrow-1/), kcount=(/jpiglo,jpjglo/) ) ELSE CALL iom_open ( 'bathy_meter.nc', inum ) ! Meter bathy in case of partial steps - CALL iom_get ( inum, jpdom_unknown, 'Bathymetry' , zdta, kstart=(/jpizoom,jpjzoom/), kcount=(/jpiglo,jpjglo/) ) + IF ( ln_isfcav ) THEN + CALL iom_get ( inum, jpdom_unknown, 'Bathymetry_isf' , zdta, kstart=(/jpizoom,jpjzoom/), kcount=(/jpiglo,jpjglo/) ) + ELSE + ! Optionally use a file attribute (open_ocean_jstart) to set a start row for reading from the global file + ! This allows the unextended grid bathymetry to be stored in the same file as the under ice-shelf extended bathymetry + CALL iom_getatt(inum, 'open_ocean_jstart', jstartrow ) ! -999 is returned if the attribute is not found + jstartrow = MAX(1,jstartrow) + CALL iom_get ( inum, jpdom_unknown, 'Bathymetry' , zdta, kstart=(/jpizoom,jpjzoom+jstartrow-1/), kcount=(/jpiglo,jpjglo/) ) + ENDIF ENDIF CALL iom_close (inum) Index: NEMO/OPA_SRC/nemogcm.F90 =================================================================== --- NEMO/OPA_SRC/nemogcm.F90 (revision 5088) +++ NEMO/OPA_SRC/nemogcm.F90 (working copy) @@ -221,7 +221,7 @@ & nn_isplt, nn_jsplt, nn_jctls, nn_jctle, & & nn_bench, nn_timing NAMELIST/namcfg/ cp_cfg, cp_cfz, jp_cfg, jpidta, jpjdta, jpkdta, jpiglo, jpjglo, & - & jpizoom, jpjzoom, jperio + & jpizoom, jpjzoom, jperio, ln_use_jattr !!---------------------------------------------------------------------- ! cltxt = '' @@ -260,6 +260,7 @@ jpjzoom = 1 nperio = 0 jperio = 0 + ln_use_jattr = .false. ENDIF #endif ! @@ -505,6 +506,7 @@ WRITE(numout,*) ' left bottom i index of the zoom (in data domain) jpizoom = ', jpizoom WRITE(numout,*) ' left bottom j index of the zoom (in data domain) jpizoom = ', jpjzoom WRITE(numout,*) ' lateral cond. type (between 0 and 6) jperio = ', jperio + WRITE(numout,*) ' use file attribute if exists as i/p j-start ln_use_jattr = ', ln_use_jattr ENDIF ! ! Parameter control ! Index: NEMO/OPA_SRC/par_oce.F90 =================================================================== --- NEMO/OPA_SRC/par_oce.F90 (revision 5088) +++ NEMO/OPA_SRC/par_oce.F90 (working copy) @@ -52,6 +52,13 @@ ! ! = 5 North fold F-point pivot ! ! = 6 cyclic East-West AND North fold F-point pivot + ! Input file read offset + LOGICAL :: ln_use_jattr !: Use file global attribute: open_ocean_jstart to determine start j-row + ! when reading input from those netcdf files that have the + ! attribute defined. This is designed to enable input files associated + ! with the extended grids used in the under ice shelf configurations to + ! be used without redundant rows when the ice shelves are not in use. + !! Values set to pp_not_used indicates that this parameter is not used in THIS config. !! Values set to pp_to_be_computed indicates that variables will be computed in domzgr REAL(wp) :: pp_not_used = 999999._wp !: vertical grid parameter Index: NEMO/SAS_SRC/nemogcm.F90 =================================================================== --- NEMO/SAS_SRC/nemogcm.F90 (revision 5088) +++ NEMO/SAS_SRC/nemogcm.F90 (working copy) @@ -160,7 +160,7 @@ & nn_isplt, nn_jsplt, nn_jctls, nn_jctle, & & nn_bench, nn_timing NAMELIST/namcfg/ cp_cfg, cp_cfz, jp_cfg, jpidta, jpjdta, jpkdta, jpiglo, jpjglo, & - & jpizoom, jpjzoom, jperio + & jpizoom, jpjzoom, jperio, ln_use_jattr !!---------------------------------------------------------------------- cltxt = '' ! @@ -347,6 +347,7 @@ WRITE(numout,*) ' left bottom i index of the zoom (in data domain) jpizoom = ', jpizoom WRITE(numout,*) ' left bottom j index of the zoom (in data domain) jpizoom = ', jpjzoom WRITE(numout,*) ' lateral cond. type (between 0 and 6) jperio = ', jperio + WRITE(numout,*) ' use file attribute if exists as i/p j-start ln_use_jattr = ', ln_use_jattr ENDIF ! ! Parameter control ! }}} Documentation added to branch at revision 5117. Changes merged with trunk and SETTE tested: {{{ cd ISFMERGE svn merge svn+ssh://acc@forge.ipsl.jussieu.fr/ipsl/forge/projets/nemo/svn/branches/2015/dev_r5087_NOC2_JATTR@5088 \ svn+ssh://acc@forge.ipsl.jussieu.fr/ipsl/forge/projets/nemo/svn/branches/2015/dev_r5087_NOC2_JATTR@HEAD . sette.sh ./sette_rpt GYRE restartability passed ISOMIP restartability passed ORCA2LIMPIS restartability passed ORCA2OFFPIS restartability passed AMM12 restartability passed ORCA2LIM3 restartability passed SAS restartability inconclusive ( solver.stat not found ) GYRE reproducibility passed ISOMIP reproducibility passed ORCA2LIMPIS reproducibility passed ORCA2OFFPIS reproducibility passed AMM12 reproducibility passed ORCA2LIM3 reproducibility passed SAS reproducibility inconclusive ( solver.stat not found ) ORCA2_LIM_AGRIF runability passed }}} Changed submitted to the trunk at revision 5118: {{{ svn ci -m"Merge changes from dev_r5087_NOC2_JATTR (see #1472) into trunk following successful SETTE tests" Sending . Sending DOC Sending DOC/TexFiles/Chapters/Chap_MISC.tex Adding DOC/TexFiles/Namelist/namcfg_orca1 Sending NEMOGCM/ARCH/arch-X64_MOBILIS.fcm Sending NEMOGCM/CONFIG/SHARED/namelist_ref Sending NEMOGCM/NEMO/OFF_SRC/nemogcm.F90 Sending NEMOGCM/NEMO/OOO_SRC/nemogcm.F90 Sending NEMOGCM/NEMO/OPA_SRC/DOM/domhgr.F90 Sending NEMOGCM/NEMO/OPA_SRC/DOM/domzgr.F90 Sending NEMOGCM/NEMO/OPA_SRC/IOM/iom.F90 Sending NEMOGCM/NEMO/OPA_SRC/LBC/mppini_2.h90 Sending NEMOGCM/NEMO/OPA_SRC/nemogcm.F90 Sending NEMOGCM/NEMO/OPA_SRC/par_oce.F90 Sending NEMOGCM/NEMO/SAS_SRC/nemogcm.F90 Transmitting file data ............ Committed revision 5118. }}} Ticket closed 03/03/15