Version 280 (modified by flavoni, 15 years ago) (diff) |
---|
Last edited Timestamp?
Using libIGCM library with ORCA2_LIM
Purposes:
- Document the using of libIGCM for NEMO, in configuration ORCA2_LIM
Quick start guide:
- Define the following alias to use SVN :
alias svn_ano='svn co http://forge.ipsl.jussieu.fr/igcmg/svn/modipsl/trunk modipsl'
- Create and go into working directory :
mkdir TRY ; cd TRY
- Extract modipsl :
svn_ano
- Extract NEMO :
cd modipsl/util ./model NEMO_IGCM
- Choosing ORCA2_LIM configuration :
cd ../modeles/UTIL ./fait_config ORCA2_LIM
- Install the makefiles :
cd ../../util ./ins_make
- Compile :
cd ../config/ORCA2_LIM gmake
- Submit Job :
( Editing at this point modipsl/config/ORCA2_LIM/IGCM00/config.card ) ../../util/ins_job cd IGCM00 qsub Job_NL1
Set up a simulation:
- First of all see official documentation
- All parameters in config.card file
In modipsl/config/ORCA2_LIM/IGCM00/config.card file you can set all parameters to manage your experience:
How to manage restart files ( in the same simulation )
in config.card you have to set duration of your experience and setting PeriodLenght parameter, so you create restart files.
( for example : if you have and experience of 10 years and a PeriodLenght of 1 year, you will have 10 restart files )
#-- Début et fin de Job
#-- "YYYY-MM-DD"
DateBegin?=2001-01-01
DateEnd?=2010-12-31
#============================
#-- 1Y, 1M, 5D, 1D
PeriodLength?=1Y
Note : If you want to use restart data from another simulation ( already run not in this moment ) you have to manage "Restarts" part of config.card
#================
#D-- Restarts -
[Restarts]
How to manage write output frequency
in config.card you have to set WriteFrequency of your experience
( for example : if you want output files every 1 month you have to put for Ocean
#===================
#D-- OCE -
[OCE]
WriteFrequency?="1M"
and if you want output files every 1 month you have to put for ICE
#===================
#D-- ICE -
[ICE]
WriteFrequency?="1M"
)
How to manage calendar type
in config.card you have to set CalendarType like 360d or leap or noleap
( for example : if you want 360 days you have to be careful of
DateEnd?=2010-12-30
because every month has 30 days
If you put for example DateEnd?=2005-12-31, you will have another run, of duration like your PeriodLenght )
How to manage rdt ( i.e. timestep )
in COMP/nemo.driver you have to change parameter : ORCA_NPDT_JOUR=15
( 15 corresponds to 86400s/5760s; it does mean that in one day you have 15 iterations; and it does mean that timestep is 5760)
How control all parameters in modipsl/config/ORCA2_LIM/IGCM00/PARAM/namelist
libIGCM change namelist's values but not in namelist's file, so it is possible to control all changes of namelist's parameters looking at :
{OUTPUT_DIR}/IGCM_OUT/ORCA2_LIM/N360d_5d/OCE/Debug/!JobName_date_date_ocean.output
How to activate Monitoring
in config.card file
#D- If you want to produce time series, this flag determines #D- frequency of post-processing submission TimeSeriesFrequency?=NONE
you have to put you experience lenght. If you do an experience during 10 years you have to put:
How to do dynamic Monitoring (25/02/2009)
- Copy original monitoring files in SUBMIT_DIR :
cp ~/KEEPED_FILES/monitoring01_nemo_ORCA2.cfg $SUBMIT_DIR/. cp ~/KEEPED_FILES/monitoring01_lim2_ORCA2.cfg $SUBMIT_DIR/.
- Copy monitoring.job in libIGCM :
cp ~/KEEPED_FILES/monitoring.job modipsl/libIGCM/.
- Control TimeSeries? in COMP/nemo.card and COMP/lim2.card:
and if you add or remove Time Serie in nemo.card or lim2.card => it is necessary to add or remove correspondig variable in $SUBMIT_DIR/monitoring01_nemo[lim2]_ORCA2.cfg
How to activate Atlas
in config.card file
#D- If you want to produce seasonal average, this flag determines #D- the period of this average SeasonalFrequency?=NONE
you have to put you experience lenght. If you do an experience during 10 years you have to put:
How to manage frequency of post processing
( Note: in this moment is not possible to have atlas and monitoring of frequency different from 1M, if we want this we've to see it with Patrick Brockman!! )
in COMP/nemo.card you have to change in [OutputFiles?] chapter:
Post_1M_grid_T (U,V,W)
and you have to change [Post_1M_grid_T(U,V,W)] chapter.
and in in COMP/lim2.card you have to change in [OutputFiles?] chapiter:
List= (${PREFIX_NWRITE}_${DATE_OPA}_icemod.nc, ${R_OUT_ICE_NWRITE}/${PREFIX}_${WF1}_icemod.nc, Post_1M_icemod)
and you have to change [Post_1M_icemod] chapter.
- How to make a parallel run
first of all add a cpp key:
and then see: http://www.nemo-ocean.eu/index.php//Using-NEMO/User-Guides/Advanced/How-to-set-up-one-simulation#eztoc1210_5
- How to have mail of end of Job, sur ccrt's machines
on mercure: in Job_Name: #PBS -M name@mail
on platine: In Job_Name: #BSUB -u name@mail
- How to activate particular key cpp
(if not for example we have this error:
WARNING : IGCM_sys_Put_Out xxx_trends.nc DOES NOT EXIST
WARNING : IGCM_sys_Put_Out xxx_diagap.nc DOES NOT EXIST
WARNING : IGCM_sys_Put_Out output.abort.nc DOES NOT EXIST )
Run only post processing:
- If you have already run a job and you need only to run post processing
you can do it in 3 ways:
see: http://forge.ipsl.jussieu.fr/libigcm/wiki/libIGCM/DocUtilisateur/FAQ
in particular: http://forge.ipsl.jussieu.fr/libigcm/wiki/libIGCM/DocUtilisateur/FAQ#Commentrelancerlespost-traitements%C3%A0partirdelafrontale
and
for example:
If you want to post process a Job already run for 10 years form 2001 to 2010:
in run.card
- modify OldPrefix
OldPrefix=''Job_!Name''_(aa-1)mmdd
where (aa-1)mmdd is last day of last month of one year before you simulation's start
- modify CumulPeriod
!CumulPeriod=10
is 10 years that you've already run
- modify PeriodState
!PeriodState=!OnQueue
- modify TimeSeriesRunnging
!TimeSeriesRunnging=n
no because Time series are depending for each other, so if you want to start a time series it starts ONLY when a previous one is finished, so if you put TimeSeriesRunnging=y (i.e. yes) it can't never start
- modify TimeSeriesCompleted
!TimeSeriesCompleted=
nothing because we want to do time series for all 10 years ( If not you have to put last time series already realised )
in Job_Name:
- modify cputim_job
#PBS -l cputim_job=4:00:00 # Limite temps
- modify DRYRUN
DRYRUN=3
- modify RUN_DIR_PATH
Create, if necessary, a test directory (for example in you workdir) Decomment RUN_DIR_PATH=/$workdir/TESTPOST
- modify SUBMIT_DIR
Decomment and put right submit directory (the one in which you are changed you run.card and you Job) SUBMIT_DIR=/$workdir/modipsl/config/$CONFIG_NAME/EXP00
List of possible errors in modipsl/config/ORCA2_LIM/IGCM00/Script_Output_JobName :
- Error : TERM = (vt100) ${HOME:-.}/.profile: .bashrc: not found
- Error : ksh: D-----------------------------------==: not found
it can depends on .profile file.
- To solve it
- .profile file it can be like:
«# .profile (idris)
# Fichier d environnement a charger sur la frontale TX7 unix LINUX
# Vous pouvez mettre a jour le fichier .profile_tx
if [ `hostname!` = "brodie" -a -f $HOME/.profile_tx ]; then
. $HOME/.profile_tx
# Fichier d environnement a charger sur les noeuds SX8 unix SUPER-UX
# Vous pouvez mettre a jour le fichier .profile_sx
elif [ `hostname!` != "brodie" -a -f $HOME/.profile_sx ]; then
. $HOME/.profile_sx
else
echo
fi »
- Error : cat: cannot open ........./modipsl/config/ORCA2_LIM/IGCM00/../.resol :
it is due to modipsl/libIGCM/AA_job file.
- To solve it
- change in this way:
#-- Resolution FLAG for oasis input
#RESOL=$(cat ${SUBMIT_DIR}/../.resol)
RESOL=ORCA2
NOTE: Be careful because this is ok for ORCA2, but if we use ORCA0.5 ore ORCA0.25 is NOT TRUE!!!!'''
go in modipsl/config/ORCA2_LIM/IGCM00 directory
cancel run.card.init and Job_Name files
and then do an ins_job again.
(does not still fixed in libIGCM_v1_2)
- Error : Input files and BC for NEMO DO NOT EXIST (i.e. sst_data.nc, sss_data.nc, geothermal_heating.nc, bathy_level.nc, etc...)
IGCM_sys_Get, ERROR : regular file ...../OCE/ORCA2_LIM/bathy_level.nc DOES NOT EXIST .
- To solve it
- In this moment we've still to download on gaya.idris.fr:~/!reee512/NEMO/ORCA2_LIM_nemo_v3.tar file, and to untar it into the directory:
${R_BC}/OCE/ORCA2_LIM
and where ${R_BC} is a variable that can be changed in modipsl/config/ORCA2_LIM/IGCM00/config.card file.
- Error : IGCM_debug_Exit : IGCM_config_Initialize Error PeriodState : Fatal
- To solve it
- change line in modipsl/config/ORCA2_LIM/IGCM00/run.card
PeriodState=Fatal
in
PeriodState=
or rm modipsl/config/ORCA2_LIM/IGCM00/run.card
- ls: ERROR: Cannot access stack: No such file or directory
in Script_Outputxxx:
( is it a problem with filemane? )
IGCM_sys_Put_Out : out_nemo /dmnfs13/cont003/flavoni/IGCM_OUT/ORCA2_LIM/N365d_5d/Out/N365d_5d_20030101_20031231_out_nemo
IGCM_sys_MkdirArchive : /dmnfs13/cont003/flavoni/IGCM_OUT/ORCA2_LIM/N365d_5d/Out
IGCM_sys_Chmod : 444 out_nemo
--Debug1--> OCE
--Debug1--> ICE
Files that will be deleted before next period-run :
ls: ERROR: Cannot access stack: No such file or directory
-r--r--r-- N365d_5d_00016425_restart.nc
-r--r--r-- N365d_5d_00016425_restart_ice.nc
(no ok still with libIGCM_v1_2)
List of possible remarks and suggestions :
- be careful at group (for example for a gensi one)
if we use a common account on CCRT we have to be sure that everygroup can have access to it, this is important for chmod 444, do another test!!!!!!
- Every time that we change modipsl/config/ORCA2_LIM/IGCM00/config.card
we have to cancel modipsl/config/ORCA2_LIM/IGCM00/run.card.init
cancel modipsl/config/ORCA2_LIM/IGCM00/Job_Name
and run ./modipsl/util/ns_job script
- To perform a second simulation after a run with PeriodState=Fatal
cancel modipsl/config/ORCA2_LIM/IGCM00/stack_error, modipsl/config/ORCA2_LIM/IGCM00/Script_Output_JobName
but do not cancel modipsl/config/ORCA2_LIM/IGCM00/run.card.init file, if not run.card file is not re-created.
( File run.card.init is created with ins_job script )
- Does it exists a caption file for run.card.init options?
Or Is there a reference file?
In to run.card.init file who can we undesrtand syntax of? :
TimeSeriesRunning=n
TimeSeriesCompleted=
SeasonalRunning=n
- test tags/libIGCM_v1_2
Is it still true?: To use libIGCM trunk version it is necessary to add in config.card in POST Session:
RebuildFromArchive=NONE
- Change in nemo.card or in nemo.driver variable: ORCA_NPDT_JOUR and OPA_NPDT_JOURS
Done :
- run on CCRT machines ( mercure )
Tests for Calendar Type, Output frequency and Restarts:
Simulation environment
Simulation duration = 5 year
PeriodLength = 1Y
timestep: rdt = 5760 equivalent to ORCA_NPDT_JOUR = 15
Output Frequency | Output Frequency | Output Frequency | ||
5d | 1M | 1Y | ||
Calendar Type | 360d | ok | ok | ok |
Calendar Type | 365d | ok | ko | ok |
Calendar Type | leap | ok | ko | to do |
ko = there are only 11 output ( point how NEMO do averadge for every month )
NOTE: control in:
- why in /dmnfs13/cont003/flavoni/IGCM_OUT/ORCA2_LIM/N360d_1m/OCE/Debug/*_ocean.output
Namelist namrun
job number no = 0
is EVER = 0????
N365d_1m_20011231_restart.nc
Control if file name is correct!!!! (my job is N365d_1m)
- Test result :
http://dods.extra.cea.fr/data/flavoni/ORCA2_LIM/
Job Name versions calendar type ONLY nemo_v3, ioipsl_v2_1_4, libIGCM_v1_2
option only(x) in diawri.F90360d ONLYio4 nemo_v3, ioipsl_v2_1_4, libIGCM_v1_2 360d dynamic nemo_v3, ioipsl_v2_1_4, libIGCM_v1_2
with monitorin01_nemo_ORCA2.cfg and monitornig01_lim2_ORCA2.cfg in SUBMIT_DIR: monitoring dynamic360d v3360d nemo_v3, ioipsl_v2_1_4, libIGCM_v1_2 360d io7nemo3 nemo_v3, ioipsl_v2_1_7, libIGCM_v1_2 360d
To do list :
- simulation=100Y ( ongoing with tags/libIGCM_v1_2 )
periodlenght=10y
and sortiee=1Y
- monitoring : ongoing on mercure/brodie for experience=10Y, PeriodLenght=1Y, WriteFrequency=1M
'ok': monitoring dynamic ( reading nemo.card => doing monitoring )
NOTE: control mesure unity for monitoring_nemo_ORCA2.cfg for soicecov ( [0,1]: is it ok? )
- atlas : ongoing on mercure/brodie for experience=10Y, PeriodLenght=1Y, WriteFrequency=1M
NOTE: changed COMP/nemo.card and set OutputFiles? and Post_1M_grid_T[U,V,W]
NOTE: changed COMP/lim2.card and set OutputFiles? and Post_1M_grid_T[U,V,W]
- test mpi
NOTE files to change (or changed) for NEMO :
- for 360d CalendarType? changed:
config/ORCA2_LIM/IGCM00/COMP/nemo.driver
and modipsl/modeles/NEMO/WORK/domain.F90
- modipsl/modeles/UTIL/fait_AA_make
difference with the old one:
in #- Compilation options ---
Committed: shade 10000 (for mercure)
- modipsl/libIGCM/AA_job
difference with the old one:
#RESOL=$(cat ${SUBMIT_DIR}/../.resol)
RESOL=ORCA2
- modipsl/modeles/NEMO/WORK/domain.F90
difference with the old one:
in line 171
WRITE(numout,*) ' leap year calendar (0/1/30) nleapy = ', nleapy
- modipsl/config/ORCA2_LIM/IGCM00/COMP/nemo.driver
difference with the old one:
added nleapy variable that corresponds to nbisex on opa.driver
# nleapy leap year calendar (0/1) (30 for 360d)
PAT_NLEAPY=$( supergrep nleapy ${SUBMIT_DIR}/PARAM/namelist )
in lines 141-151
case ${config_UserChoices_CalendarType} in
leap | | Gregorian)
ORCA_NLEAPY=1;;
noleap)
ORCA_NLEAPY=0;;
360d)
ORCA_NLEAPY=30;;
esac
in line 158
-e "s%${PAT_NLEAPY}% nleapy=${ORCA_NLEAPY}%" \
Appendix A - Dods directory:
- to remove a directory from dods :
On Mercure to CCRT DOds directory is :
${SAVE_DIR}/dods/public/${LOGIN}/${TAG_NAME}
cd ${SAVE_DIR}/dods dods_rm public/${LOGIN}/${TAG_NAME}/directory
Simona Flavoni last update: Timestamp?
Attachments (1)
- figura-libigcm.jpg (1.3 MB) - added by trac 6 years ago.
Download all attachments as: .zip