Version 36 (modified by pmessina, 7 years ago) (diff) |
---|
We present here the simulation tests in the Amazon area varying K_LATOSA parameters.
The run configuration is the same as in the global simulation. For more details see here.
In all simulations dynamic SLA is activated and RESIDENCE_TIME, TAU_SAP and SLAINIT are set as in the table below:
PFT | RESIDENCE_TIME | TAU_SAP | SLAINIT | |
---|---|---|---|---|
1 | Bare | -9999 | -9999 | 0.026 |
2 | TrBrEv | 30.0 | 730. | 0.026 |
3 | TrBrDe | 30.0 | 730. | 0.044 |
4 | TeNeEv | 40.0 | 730. | 0.0138 |
5 | TeBrEv | 40.0 | 730. | 0.030 |
6 | TeBrDe | 40.0 | 730. | 0.039 |
7 | BoNeEv | 80.0 | 730. | 0.0132 |
8 | BoBrDe | 80.0 | 730. | 0.0375 |
9 | BoNeDe | 80.0 | 730. | 0.024 |
10 | C3Gr | 0.0 | 730. | 0.0315 |
11 | C4Gr | 0.0 | 730. | 0.0315 |
12 | C3Ag | 0.0 | 730. | 0.039 |
13 | C4Ag | 0.0 | 730. | 0.039 |
K_LATOSA_MIN and K_LATOSA_MAX vary over the simulations as described in the sections below:
1) reflow3823.klat1 simulations
Where to find the configuration for spin-up, transient and historical simulations on CURIE:
- Spin-up: /ccc/work/cont003/dsm/p24palm/N_CYCLE_PALMIRA_3714/modipsl/config/ORCHIDEE_OL/FG1low.CWRR.3823.klat1
- Transient: /ccc/work/cont003/dsm/p24palm/N_CYCLE_PALMIRA_3714/modipsl/config/ORCHIDEE_OL/FG1translow.CWRR.3823.klat1
- Historical: /ccc/work/cont003/dsm/p24palm/N_CYCLE_PALMIRA_3714/modipsl/config/ORCHIDEE_OL/FG2low.CWRR.3823.klat1
Where to find the output on CURIE?
/ccc/store/cont003/dsm/p24palm/IGCM_OUT/OL2/PROD/reflow3823.klat1
or on the dods:here
PFT | K_LATOSA_MIN | K_LATOSA_MIN | |
---|---|---|---|
1 | Bare | -9999 | -9999 |
2 | TrBrEv | 6600.0 | 6800.0 |
3 | TrBrDe | 5600.0 | 5800.0 |
4 | TeNeEv | 834.0 | 3200.0 |
5 | TeBrEv | 1350.0 | 6158.0 |
6 | TeBrDe | 3000.0 | 4000.0 |
7 | BoNeEv | 800.0 | 4200.0 |
8 | BoBrDe | 4800.0 | 5000.0 |
9 | BoNeDe | 3000.0 | 4000.0 |
10 | C3Gr | 1.0 | 4.0 |
11 | C4Gr | 1.0 | 4.0 |
12 | C3Ag | 1.0 | 6.0 |
13 | C4Ag | 1.0 | 6.0 |
2) reflow3823.klat2 simulations
Where to find the configuration for spin-up, transient and historical simulations on CURIE:
- Spin-up: /ccc/work/cont003/dsm/p24palm/N_CYCLE_PALMIRA_3714/modipsl/config/ORCHIDEE_OL/FG1low.CWRR.3823.klat2
- Transient: /ccc/work/cont003/dsm/p24palm/N_CYCLE_PALMIRA_3714/modipsl/config/ORCHIDEE_OL/FG1translow.CWRR.3823.klat2
- Historical: /ccc/work/cont003/dsm/p24palm/N_CYCLE_PALMIRA_3714/modipsl/config/ORCHIDEE_OL/FG2low.CWRR.3823.klat2
Where to find the output on CURIE?
/ccc/store/cont003/dsm/p24palm/IGCM_OUT/OL2/PROD/reflow3823.klat2
or on the dods:here
PFT | K_LATOSA_MIN * 1.25 | K_LATOSA_MIN * 1.25 | |
---|---|---|---|
1 | Bare | -9999 | -9999 |
2 | TrBrEv | 8250.0 | 8500.0 |
3 | TrBrDe | 7000.0 | 7250.0 |
4 | TeNeEv | 1042.5 | 4000.0 |
5 | TeBrEv | 1687.5 | 7697.5 |
6 | TeBrDe | 3750.0 | 5000.0 |
7 | BoNeEv | 1000.0 | 5250.0 |
8 | BoBrDe | 6000.0 | 6250.0 |
9 | BoNeDe | 3750.0 | 5000.0 |
10 | C3Gr | 1.25 | 5.0 |
11 | C4Gr | 1.25 | 5.0 |
12 | C3Ag | 1.25 | 7.5 |
13 | C4Ag | 1.25 | 7.5 |
3) reflow3823.klat3 simulations
Where to find the configuration for spin-up, transient and historical simulations on CURIE:
- Spin-up: /ccc/work/cont003/dsm/p24palm/N_CYCLE_PALMIRA_3714/modipsl/config/ORCHIDEE_OL/FG1low.CWRR.3823.klat3
- Transient: /ccc/work/cont003/dsm/p24palm/N_CYCLE_PALMIRA_3714/modipsl/config/ORCHIDEE_OL/FG1translow.CWRR.3823.klat3
- Historical: /ccc/work/cont003/dsm/p24palm/N_CYCLE_PALMIRA_3714/modipsl/config/ORCHIDEE_OL/FG2low.CWRR.3823.klat3
Where to find the output on CURIE?
/ccc/store/cont003/dsm/p24palm/IGCM_OUT/OL2/PROD/reflow3823.klat3
or on the dods:here
PFT | K_LATOSA_MIN * 1.5 | K_LATOSA_MIN * 1.5 | |
---|---|---|---|
1 | Bare | -9999 | -9999 |
2 | TrBrEv | 9900.0 | 10200.0 |
3 | TrBrDe | 8400.0 | 8700.0 |
4 | TeNeEv | 1251.0 | 4800.0 |
5 | TeBrEv | 2025.0 | 9237.5 |
6 | TeBrDe | 4500.0 | 6000.0 |
7 | BoNeEv | 1200.0 | 6300.0 |
8 | BoBrDe | 7200.0 | 7500.0 |
9 | BoNeDe | 4500.0 | 6000.0 |
10 | C3Gr | 1.5 | 6.0 |
11 | C4Gr | 1.5 | 6.0 |
12 | C3Ag | 1.5 | 9.0 |
13 | C4Ag | 1.5 | 9.0 |
Results
Inter-monitoring.
The average of the principal variables over the simulation area is presented here
Geographical distribution
Fig. 1: The GPP, NPP, LAI, Total biomass for the year 2010 (last year of the historical simulation).
CN ratio
In the tables below the min and max of the CN ratio over the different grid cells are shown. To calculate the ratio, the annual averages of 2010 are used.
reflow3823.klat1 | |||
---|---|---|---|
PFT | CN ratio MIN | CN ratio MAX | |
2 | TrBrEv | 36.80 | 36.80 |
3 | TrBrDe | 21.60 | 21.60 |
4 | TeNeEv | 69.70 | 69.70 |
5 | TeBrEv | 33.50 | 33.50 |
6 | TeBrDe | 53.30 | 53.30 |
7 | BoNeEv | 67.30 | 67.30 |
8 | BoBrDe | 39.60 | 39.60 |
9 | BoNeDe | nan | nan |
10 | C3Gr | 30.00 | 30.00 |
11 | C4Gr | 29.99 | 30.00 |
12 | C3Ag | 19.92 | 20.00 |
13 | C4Ag | 19.97 | 20.00 |
reflow3823.klat2 | |||
---|---|---|---|
PFT | CN ratio MIN | CN ratio MAX | |
2 | TrBrEv | 35.41 | 36.80 |
3 | TrBrDe | 21.60 | 21.60 |
4 | TeNeEv | 69.70 | 69.70 |
5 | TeBrEv | 33.50 | 33.50 |
6 | TeBrDe | 53.30 | 53.30 |
7 | BoNeEv | 67.30 | 67.30 |
8 | BoBrDe | 39.60 | 39.60 |
9 | BoNeDe | nan | nan |
10 | C3Gr | 30.00 | 30.00 |
11 | C4Gr | 29.91 | 30.00 |
12 | C3Ag | 19.86 | 20.00 |
13 | C4Ag | 19.97 | 20.00 |
reflow3823.klat3 | |||
---|---|---|---|
PFT | CN ratio MIN | CN ratio MAX | |
2 | TrBrEv | 36.21 | 36.80 |
3 | TrBrDe | 21.60 | 21.60 |
4 | TeNeEv | 69.70 | 69.70 |
5 | TeBrEv | 33.50 | 33.50 |
6 | TeBrDe | 53.30 | 53.30 |
7 | BoNeEv | 67.30 | 67.30 |
8 | BoBrDe | 39.60 | 39.60 |
9 | BoNeDe | nan | nan |
10 | C3Gr | 30.00 | 30.00 |
11 | C4Gr | 29.98 | 30.00 |
12 | C3Ag | 19.83 | 20.00 |
13 | C4Ag | 19.97 | 20.00 |