source: CONFIG/IPSLCM/IPSLCM5-2/EXP00/COMP/lmdz.driver @ 1538

Last change on this file since 1538 was 1538, checked in by jgipsl, 11 years ago

Modifications in working configuration :

Added option LMDZ_COSP_daily1979=y to be set in lmdz.card for CMIP5
historical runs. This option activates COSP daily output for years 1979
and later (if LMDZ_COSP_OK=y).

All *.driver are now the same in the 5 experiences EXP00, historical,
Chistorical, piControl and CpiControl?. The behavior of each experience
has not been changed.

File size: 16.1 KB
Line 
1#!/bin/ksh
2#-----------------------------------------------------------------
3function LMDZ_sed
4{
5    IGCM_debug_PushStack "LMDZ_sed"
6
7    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
8    RET=$?
9    echo "LMDZ_sed : ${1} ${2} ${3}"
10    \mv ${1}.tmp ${1}
11
12    IGCM_debug_PopStack "LMDZ_sed"
13    return $RET
14}
15
16function ATM_Initialize
17{
18    IGCM_debug_PushStack "ATM_Initialize"
19
20    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
21
22    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
23
24    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
25
26    ##-- Calendar type for LMDZ
27    case ${config_UserChoices_CalendarType} in
28        leap|gregorian)
29            CalendarTypeForLmdz=earth_366d;;
30        noleap)
31            CalendarTypeForLmdz=earth_365d;;
32        360d)
33            CalendarTypeForLmdz=earth_360d;;
34        *)
35            CalendarTypeForLmdz=earth_360d
36    esac
37
38    ##--Frequency purpose ....
39    ##--  Initialisation  ....
40    OK_instan=n
41    OK_journe=n
42    OK_mensuel=n
43    ok_hf=n
44
45    case ${config_UserChoices_PeriodLength} in
46        1Y|1y|1M|1m) OK_mensuel=y ;;
47        5D|5d|1D|1d) OK_journe=y ;;
48    esac
49
50    for frequency in ${config_ATM_WriteFrequency} ; do
51        case ${frequency} in
52            5D|5d|1D|1d) OK_journe=y ;;
53        esac
54        case ${frequency} in
55            HF|hf) ok_hf=y ;;
56        esac
57    done
58
59    ## Read LMDZ_NbPeriod_adjust option in lmdz.card
60    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_NbPeriod_adjust
61    LMDZ_NbPeriod_adjust=${lmdz_UserChoices_LMDZ_NbPeriod_adjust}
62
63    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
64        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_Bands_file_name
65        LMDZ_Bands_file_name=${lmdz_UserChoices_LMDZ_Bands_file_name}
66    fi
67
68    ##  Read LMDZ_Freq_aero and LMDZ_Length_aero in lmdz.card
69    LMDZ_Freq_aero=${lmdz_UserChoices_LMDZ_Freq_aero}
70    LMDZ_Length_aero=${lmdz_UserChoices_LMDZ_Length_aero}
71
72    ##  Read LMDZ_COSP_monthly  LMDZ_COSP_daily and LMDZ_COSP_hf in lmdz.card
73    LMDZ_COSP_OK=${lmdz_UserChoices_LMDZ_COSP_OK}
74    LMDZ_COSP_monthly=${lmdz_UserChoices_LMDZ_COSP_monthly}
75    LMDZ_COSP_daily=${lmdz_UserChoices_LMDZ_COSP_daily}
76    LMDZ_COSP_hf=${lmdz_UserChoices_LMDZ_COSP_hf}
77
78    ##  Read LMDZ_NMC_monthly  LMDZ_NMC_daily and LMDZ_NMC_hf in lmdz.card
79    LMDZ_NMC_monthly=${lmdz_UserChoices_LMDZ_NMC_monthly}
80    LMDZ_NMC_daily=${lmdz_UserChoices_LMDZ_NMC_daily}
81    LMDZ_NMC_hf=${lmdz_UserChoices_LMDZ_NMC_hf}
82
83    IGCM_debug_PopStack "ATM_Initialize"
84}
85
86#-----------------------------------------------------------------
87function ATM_Update
88{
89    IGCM_debug_PushStack "ATM_Update"
90
91
92    case ${config_UserChoices_PeriodLength} in
93        *Y|*y) 
94               LMDZ_ecrit_mth=30.
95               LMDZ_ecrit_ISCCP=30.
96               LMDZ_periodav=30.
97               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
98                  echo Change calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d
99                  exit
100               fi
101               ;;
102        *)
103               LMDZ_ecrit_mth=${PeriodLengthInDays}.
104               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
105               LMDZ_periodav=${PeriodLengthInDays}.
106               ;;
107    esac
108
109    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
110    if [ ${CumulPeriod} -eq 1 ] ; then
111        RAZ_DATE=1
112    else
113        RAZ_DATE=0
114    fi
115
116    ## algo : For CumulPeriod=1 ;
117    ##        IF NbPeriod_Adjust = 0, Get Bands file directly from server, store it with _0 suffix
118    ##        ELSE LMDZ_adjust=y ; save Bands file on file server ;
119    ##        For CumulPeriod=2 to LMDZ_NbPeriod_adjust ; Get Bands file from server (CumulPeriod-1) ; LMDZ_adjust=y ; save Bands file on file server ;
120    ##        For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from server (CumulPeriod=LMDZ_NbPeriod_adjust 0 to force it) ; Use Bands ;
121
122    if [ ${CumulPeriod} -eq 1 ] ; then
123        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
124            IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
125            IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
126            IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
127        fi
128    fi
129
130    LMDZ_adjust=n
131    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y
132
133    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
134    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 
135
136    [ ${CumulPeriod} -gt 1 ] && ( IGCM_sys_Get ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat )
137
138    ##-- GHG forcing :
139    ##   If forcing file exist in run directory, read values for the current year and modify physiq.def
140    if [ -f SOLARANDVOLCANOES.txt ] ; then
141        IPCC_SOLAR=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
142        LMDZ_sed physiq.def solaire     ${IPCC_SOLAR}
143    fi
144    if [ -f CO2.txt ] ; then
145        IPCC_CO2=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
146        LMDZ_sed physiq.def co2_ppm     ${IPCC_CO2}
147    fi
148    if [ -f CH4.txt ] ; then
149        IPCC_CH4=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
150        LMDZ_sed physiq.def CH4_ppb     ${IPCC_CH4}
151    fi
152    if [ -f N2O.txt ] ; then
153        IPCC_N2O=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
154        LMDZ_sed physiq.def N2O_ppb     ${IPCC_N2O}
155    fi
156    if [ -f CFC11.txt ] ; then
157        IPCC_CFC11=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
158        LMDZ_sed physiq.def CFC11_ppt   ${IPCC_CFC11}
159    fi
160    if [ -f CFC12.txt ] ; then
161        IPCC_CFC12=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
162        LMDZ_sed physiq.def CFC12_ppt   ${IPCC_CFC12}
163    fi
164
165
166    # Add special treatement for CARBON CYCLE
167    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] || [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
168
169        typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
170        typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
171        typeset PathCO2log
172        typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
173
174        if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ]) ; then
175        ##--Initialization of fluxes to an undefined value at the first run
176            UndefinedValueCo2=-9999
177            InitPeriodCo2=0
178            InitDateBeginCo2=${UndefinedValueCo2}
179            InitYearCo2=$(( ${year} - 1 )) 
180            InitDateEndCo2=${InitYearCo2}1231
181            fCO2_ff=${UndefinedValueCo2} 
182            CO2SBG=${UndefinedValueCo2}
183            CO2LU=${UndefinedValueCo2}
184            CO2MBG=${UndefinedValueCo2}
185            CO2_ppm_prec=${UndefinedValueCo2}
186        # Get the initial value of atmosp. pco2
187            CO2_ppm=${lmdz_UserChoices_co2_init}
188           
189            IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
190            IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
191           
192        # Save CO2 values in ExeCpuLog variable contents 5 fields
193            echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
194                gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
195                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
196           
197        # Get the path where the log file co2.log is
198            PathCO2log=${SUBMIT_DIR} 
199        # Get Previous line in co2.log
200            PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
201           
202        else
203           
204        # NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
205        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
206        #SubmitRestartPath=
207            if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ]) ; then
208                IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
209                PathCO2log=${config_ATM_SubmitRestartPath}
210                Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
211                PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
212               
213                IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
214                IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
215               
216            # Save Last Line of control in new co2.log file
217                InitPeriodCo2=0   
218                InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
219                InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
220                fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
221                CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
222                CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
223                CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
224                CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
225                CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
226               
227                echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
228                    gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
229                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
230            else
231           # Get restart line in co2.log
232                PathCO2log=${SUBMIT_DIR}
233                PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
234           # Get the value of atmosp. pco2 in co2.log
235                CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
236            fi
237           
238        fi
239
240        if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
241            # Modify co2_ppm in physiq.def only for historical run
242            LMDZ_sed physiq.def co2_ppm     ${CO2_ppm}
243        fi
244    fi
245    # end CARBON_CYCLE
246
247    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate
248    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
249    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
250        LMDZ_COSP_daily=y
251    fi
252
253
254    ## physiq.def parameters modified from initial physiq_L${RESOL_ATM_Z}
255    LMDZ_sed physiq.def OK_instan   ${OK_instan}
256    LMDZ_sed physiq.def OK_journe   ${OK_journe}
257    LMDZ_sed physiq.def OK_mensuel  ${OK_mensuel}
258    LMDZ_sed physiq.def ok_hf       ${ok_hf}
259    LMDZ_sed physiq.def ecrit_mth   ${LMDZ_ecrit_mth}
260    LMDZ_sed physiq.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
261    LMDZ_sed physiq.def ok_cosp     ${LMDZ_COSP_OK}
262    LMDZ_sed physiq.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
263    LMDZ_sed physiq.def ok_journeCOSP   ${LMDZ_COSP_daily}
264    LMDZ_sed physiq.def ok_hfCOSP   ${LMDZ_COSP_hf}
265    LMDZ_sed physiq.def ok_histNMC  "${LMDZ_NMC_monthly}, ${LMDZ_NMC_daily}, ${LMDZ_NMC_hf}"
266
267    ## gcm.def parameters : no change since gcm.def_${RESOL_ATM_3D} is used and already modified
268
269    ## run.def parameters
270    LMDZ_sed run.def dayref   ${InitDay}
271    LMDZ_sed run.def anneeref ${InitYear}
272    LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
273    LMDZ_sed run.def nday     ${PeriodLengthInDays}
274    LMDZ_sed run.def raz_date ${RAZ_DATE}
275    LMDZ_sed run.def periodav ${LMDZ_periodav}
276    LMDZ_sed run.def adjust   ${LMDZ_adjust}
277
278    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
279    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta
280    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
281    if [ ${ByPass_hgardfou_teta} = y ] ; then
282        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
283        IGCM_sys_Mv gcm.def.tmp gcm.def
284        echo
285        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
286        echo
287        cat gcm.def
288        ByPass_hgardfou_teta=n
289        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
290    fi
291
292    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
293    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats
294    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
295    if [ ${ByPass_hgardfou_mats} = y ] ; then
296        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
297        IGCM_sys_Mv gcm.def.tmp gcm.def
298        echo
299        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
300        echo
301        cat gcm.def
302        ByPass_hgardfou_mats=n
303        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
304    fi
305
306    if ( ${FirstInitialize} ) ; then
307
308        if ( [ "${config_Restarts_OverRule}" = "n" ] && [ "${config_ATM_Restart}" = "n" ] ); then
309            if [ ${DRYRUN} -le 2 ] ; then
310                ##-- suppression of ozone file construction --
311                cp physiq.def physiq.def.save
312                LMDZ_sed physiq.def read_climoz 0
313                IGCM_sys_Cp ${R_EXE}/create_etat0_limit.e ${RUN_DIR}/.
314                if [ ${DRYRUN} -le 1 ] ; then
315                    ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e
316                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
317                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
318                fi
319                IGCM_sys_Mv physiq.def.save physiq.def
320            else
321                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated"
322                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated for DRYRUN = " $DRYRUN >> stack
323            fi
324        fi
325
326    fi
327
328    IGCM_debug_PopStack "ATM_Update"
329}
330
331#-----------------------------------
332function ATM_Finalize
333{
334    IGCM_debug_PushStack "ATM_Finalize"
335
336    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
337
338
339    # Add special treatement for CARBON CYCLE
340    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] || [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
341        typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
342
343        # Fossil fuel emission
344        if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
345            # For Control, no fossil fuel emission :
346            fCO2_ff=0
347            echo "Fossil Fuel for control run  :" ${fCO2_ff}
348        else
349            # For historical, get the fossile fuel file :
350            fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
351            echo "Fossil Fuel for historical run  :" ${fCO2_ff}
352        fi
353
354        # Get the value of ocean carbon flux
355        CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
356        CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
357        echo "Ocean carbon flux  :" ${CO2MBG}
358
359        # Get the value of land fluxes
360        set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
361        CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
362        CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
363        CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
364        echo "Land carbon flux (NEP)         :" ${CO2SRF}
365        echo "LU flux          (FLUC)        :" ${CO2LU}
366        echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
367
368        # Previous CO2
369        CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
370        echo "Previous CO2  :" ${CO2_ppm_prec}
371
372        # Formula
373        CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
374        echo "New CO2  :" ${CO2_ppm}
375
376        # Save CO2 values in ExeCpuLog variable contents 5 fields
377        echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
378            gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
379                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
380
381    fi
382
383    echo FINALIZE ATM !
384
385    IGCM_debug_PopStack "ATM_Finalize"
386}
Note: See TracBrowser for help on using the repository browser.