source: CONFIG/IPSLCM/IPSLCM5-2/EXPALL/CARD/Chistorical/config.card @ 1550

Last change on this file since 1550 was 1549, checked in by jgipsl, 13 years ago

Added directory EXPALL which contains the possibility to run all 5
experiences :

  • DRIVER : contains all *.driver before in COMP directory (the drivers are the same for all experiences)
  • PARAM : all files from EXP00/PARAM (not yet adapted for all experiences)
  • CARD : this directory contains one subdirectory per experience; hitorical, piControl, etc...
  • CARD/XXX : contains all *.card necessary to run experience XXX

*This revision contains the PARAM only for EXP00. In next commit,
modifications will be done so that all experience can be run correctly.
*Must be run with a modifcation in libIGCM concerning the DRIVER
directory.

File size: 7.0 KB
Line 
1#
2# This is config.card file for IPSLCM5A configuration
3#
4#========================================================================
5#D-- Compatibility -
6[Compatibility]
7libIGCM=1.0
8#D-- UserChoices -
9[UserChoices]
10#============================
11JobName=Chistorical00
12#----- Short Name of Experiment
13ExperimentName=historical
14#----- DEVT TEST PROD
15SpaceName=DEVT
16LongName="IPSLCM5A CMIP5 DEVT phase historical example with large outputs"
17TagName=IPSLCM5A
18#============================
19#-- leap, noleap, 360d
20CalendarType=noleap
21#-- Experiment dates : Beginning and ending
22#-- "YYYY-MM-DD"
23DateBegin=1850-01-01
24DateEnd=1850-12-31
25#============================
26#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation
27PeriodLength=1M
28#============================
29#-- PBS Class (required on brodie mono/multi)
30#JobClass=mono
31JobClass=multi
32#============================
33#-- Total Number of Processors (minimum is 2 for a coupled configuration)
34#JobNumProcTot=2
35JobNumProcTot=4
36#============================
37#-- Run Options : here for oasis coupling
38JobRunOptions='-f'
39#-- for vargas
40#JobRunOptions='"-pgmmodel MPMD -cmdfile"'
41#============================
42# config.card configuration options :
43#R_INIT=/u/rech/psl/rpsl035/IGCM/INIT
44#R_INIT=/dmnfs/cont003/p86ipsl/IGCM/INIT
45#R_BC=/u/rech/psl/rpsl035/IGCM/BC
46#R_BC=/dmnfs/cont003/p86ipsl/IGCM/BC
47#============================
48
49#========================================================================
50#D-- Restarts -
51[Restarts]
52#D- by default: config.card describes no restart for all components
53#D-             ie start from Levitus or limit files
54#D- If you want to restart all components from the same simulation,
55#D-      put OveRule flag to 'y' and set the next 3 parameters
56OverRule=y
57#D- Last day of the experience used as restart for all components
58RestartDate=1850-12-31
59#D- Define restart simulation name for all components
60# For historical simulation you have to start from an other simulation
61RestartJobName=CpiControl00
62#D- Path Server Group Login
63RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/CpiControl
64
65#========================================================================
66#D-- ATM -
67[ATM]
68#
69WriteFrequency="1M 1D HF HF3h HF3hm"
70# If config_Restarts_OverRule == 'n' next 4 params are read
71Restart= n
72# Last day of the experience used as restart for this component if Restart=y
73RestartDate=1899-12-31
74# Define restart simulation name for this component
75RestartJobName=EXP00
76RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
77# !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
78SubmitRestartPath=${SUBMIT_DIR}/../CpiControl
79# Old component name for restart (if empty, use new name)
80OldName=
81
82#========================================================================
83#D-- OCE -
84[OCE]
85WriteFrequency="1M 1D"
86# If config_Restarts_OverRule == 'n' next 4 params are read
87Restart= n
88##-- Last day of the experience used as restart for this component if Restart=y
89RestartDate=1899-12-31
90# Define restart simulation name for this component
91RestartJobName=EXP00
92RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
93# Old component name for restart (if empty, use new name)
94OldName=
95
96#========================================================================
97#D-- ICE -
98[ICE]
99WriteFrequency="1M 1D"
100# If config_Restarts_OverRule == 'n' next 4 params are read
101Restart= n
102##-- Last day of the experience used as restart for this component if Restart=y
103RestartDate=1899-12-31
104# Define restart simulation name for this component
105RestartJobName=EXP00           
106RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
107# Old component name for restart (if empty, use new name)
108OldName=
109
110#========================================================================
111#D-- MBG -
112[MBG]
113WriteFrequency="1M"
114# If config_Restarts_OverRule == 'n' next 4 params are read
115Restart= n
116##-- Last day of the experience used as restart for this component if Restart=y
117RestartDate=1990-12-31
118# Define restart simulation name
119RestartJobName=EXP00
120RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
121# Old component name for restart (if empty, use new name)
122OldName=
123
124#========================================================================
125#D-- SRF -
126[SRF]
127WriteFrequency="1M HF"
128# If config_Restarts_OverRule == 'n' next 4 params are read
129Restart=n
130##-- Last day of the experience used as restart for this component if Restart=y
131RestartDate=1899-12-31
132# Define restart simulation name for this component
133RestartJobName=EXP00
134RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
135#-- Old component name for restart (if empty, use new name)
136OldName=
137
138#========================================================================
139#D-- SBG - STOMATE
140[SBG]
141WriteFrequency="1M"
142# If config_Restarts_OverRule == 'n' next 4 params are read
143Restart=n
144#-- Last day of the experience used as restart for this component if Restart=y
145RestartDate=1899-12-31
146# Define restart simulation name for this component
147RestartJobName=EXP00
148RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
149#-- Old component name for restart (if empty, use new name)
150OldName=
151
152#========================================================================
153#D-- CPL -
154[CPL]
155WriteFrequency="1M 1D"
156# If config_Restarts_OverRule == 'n' next 4 params are read
157Restart= n
158##-- Last day of the experience used as restart for this component if Restart=y
159RestartDate=1899-12-31
160# Define restart simulation name for this component
161RestartJobName=EXP00
162RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
163# Old component name for restart (if empty, use new name)
164OldName=
165
166#========================================================================
167#D-- ListOfComponents -
168[ListOfComponents]
169#D- For each component, Name of component, Tag of component
170ATM= (lmdz, LMDZ4-dev)
171SRF= (orchidee, ORCHIDEE_1_9_5)
172SBG= (stomate, ORCHIDEE_1_9_5)
173OCE= (opa9, CMIP5_IPSL)
174ICE= (lim2, CMIP5_IPSL)
175MBG= (pisces, CMIP5_IPSL)
176CPL= (oasis, OASIS3)
177
178#========================================================================
179#D-- Executable -
180[Executable]
181Name=run_file
182#D- For each component, Real name of executable, Name of executable for oasis
183ATM= (gcm.e, lmdz.x)
184SRF= ("", "")
185SBG= ("", "")
186OCE= (opa, opa.xx)
187ICE= ("", "")
188MBG= ("", "")
189CPL= (oasis, oasis)
190
191#========================================================================
192#D-- Post -
193[Post]
194#D- Do we rebuild parallel output, this flag determines
195#D- frequency of rebuild submission (use NONE for DRYRUN=3)
196RebuildFrequency=1Y
197#D- Do we rebuild parallel output from archive (use NONE to use SCRATCHDIR as buffer)
198RebuildFromArchive=NONE
199#D- If you want to produce time series, this flag determines
200#D- frequency of post-processing submission (NONE if you don't want)
201TimeSeriesFrequency=10Y
202#D- If you want to produce seasonal average, this flag determines
203#D- the period of this average (NONE if you don't want)
204SeasonalFrequency=10Y
205#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
206#D- Usefull if you do not want to consider the first X simulation's years
207SeasonalFrequencyOffset=0
208
209#========================================================================
Note: See TracBrowser for help on using the repository browser.