source: CONFIG/IPSLCM/IPSLCM5/branches/IPSLCM5_v2/EXP00/PARAM/namcouple_ORCA2xLMD144142 @ 819

Last change on this file since 819 was 819, checked in by aclsce, 15 years ago
  • Added the use of mask patch in opa9.card and lim2.card
  • Added the possibility to generate mesh_mask file by activating mesh_mash variable in opa9.card
  • Use of ORCA2.3 configuration


File size: 15.7 KB
Line 
1###############################################################################
2#
3#      Input file for OASIS3
4#
5#      This version is for use with IPSL_CM4_v1
6#
7#      The file will be edited at runtime to update it for
8#         - the initial date of the run
9#
10###############################################################################
11# 
12#      Input delimiters have to occupy position 1 to 9 !
13#      No blank lines allowed !
14#      Length of input lines <= 80 !
15#
16###############################################################################
17#
18# SEQMODE : 1        if all models run simultaneously
19#           n        if  n  models run sequentially
20 $SEQMODE
21              1
22 $END
23###############################################################################
24#
25# CHANNEL (CHAR*4)
26#           PIPE        if named pipes + binary files are used
27#                       for synchro and data respectively (not tested);
28#           MPI1/2      if MPI message passing is used for data exchange;
29#
30 $CHANNEL
31<lib_mpi>
32<nproc_atm>  <nproc_atm>
33<nproc_oce>  <nproc_oce>       
34 $END
35###############################################################################
36#
37# NFIELDS : total number of fields being exchanged.
38#
39 $NFIELDS
40            24
41 $END
42###############################################################################
43#
44# JOBNAME : acronym for the given simulation (CHAR*3)
45#
46 $JOBNAME
47            EXP   
48 $END
49###############################################################################
50#
51# NBMODEL : number of models and their names (CHAR*6).
52#
53 $NBMODEL
54  2  lmdz.x oceanx
55 $END
56###############################################################################
57#
58# RUNTIME: total simulated time for the actual run in seconds (<I8)
59#
60 $RUNTIME
61 <total_time>
62 $END
63###############################################################################
64#
65# INIDATE (I8)
66#         initial date of the run (YYYYMMDD)         
67#
68 $INIDATE
69 <initial_date>
70 $END
71###############################################################################
72#
73# MODINFO (YES or NOT)
74#         Indicates whether a header is encapsulated within the field
75#
76 $MODINFO
77  NOT
78 $END
79###############################################################################
80#
81# NLOGPRT: printing level in output file cplout:
82#              0 = no printing
83#              1 = main routines and field names when treated
84#              2 = complete output
85#
86 $NLOGPRT
87   2
88 $END
89###############################################################################
90#
91# CALTYPE: Calendar type
92#                  0      = 365 day calendar (no leap years)
93#                  1      = 365 day, or 366 days for leap years, calendar
94#                  n (>1) = n day month calendar
95#
96 $CALTYPE
97 <calendar_type>
98 $END
99#
100#
101###############################################################################
102 $STRINGS
103###############################################################################
104#
105#                      OCEAN  --->>>  ATMOS
106#                      --------------------
107# Field 1 : Weighted Sea surface temperature (o->a 1)
108#
109O_SSTSST SISUTESW 1 86400  5  sstoc.nc  <output_mode>
110torc  tlmd  LAG=5760
111P  2 P  0
112LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
113# LOCTRANS: AVERAGE to average value over coupling period
114 AVERAGE
115# CHECKIN: indicate computation of global, land and sea field integrals.
116 INT=1
117# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
118#         number of overlapped neighbors
119wo2a.tsg 93  1  12
120# CHECKOUT: indicate computation of global, land and sea field integrals.
121 INT=1
122#
123  NORSUD   WSTEST
124# 
125############################################################################
126# Field 2 : Sea ice extent  (o->a 2)
127#
128OIceFrac SIICECOV 44 86400  5  sstoc.nc <output_mode>
129torc  tlmd   LAG=5760
130P  2 P  0
131#
132LOCTRANS CHECKIN MOZAIC  CHECKOUT  REVERSE
133 AVERAGE
134# CHECKIN: indicate computation of global, land and sea field integrals.
135 INT=1
136#
137wo2a.tsg 93  1 12
138# CHECKOUT: indicate computation of global, land and sea field integrals.
139 INT=1
140#
141NORSUD   WSTEST
142#
143############################################################################
144# Field 3 : Weighted Sea Ice Temperature (o->a 3)
145#
146O_TepIce SIICTEMW 34 86400  5  sstoc.nc  <output_mode>
147torc  tlmd   LAG=5760
148P  2 P  0
149LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
150 AVERAGE
151# CHECKIN: indicate computation of global, land and sea field integrals.
152 INT=1
153#
154wo2a.tsg 93  1  12
155# CHECKOUT: indicate computation of global, land and sea field integrals.
156 INT=1
157#
158  NORSUD   WSTEST
159#
160#############################################################################
161# Field 4 : Weighted Sea ice albedo (o->a 4)
162#
163O_AlbIce  SIICEALW 17 86400  5  sstoc.nc  <output_mode>
164torc  tlmd  LAG=5760 
165P  2 P  0
166#
167LOCTRANS CHECKIN MOZAIC CHECKOUT  REVERSE
168 AVERAGE
169# CHECKIN: indicate computation of global, land and sea field integrals.
170 INT=1
171#
172wo2a.tsg 93  1 12
173# CHECKOUT: indicate computation of global, land and sea field integrals.
174 INT=1
175#
176NORSUD   WSTEST
177#
178############################################################################
179# Field 5 : Current surface (o->a 5)
180O_OCurx1 CURRENTX 321 86400  5  sstoc.nc  <output_mode>
181torc    tlmd  LAG=5760
182P  2 P  0
183LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
184 AVERAGE
185# CHECKIN: indicate computation of global, land and sea field integrals.
186 INT=1
187#
188wo2a.tsg 93  1 12
189# CHECKOUT: indicate computation of global, land and sea field integrals.
190 INT=1
191#
192NORSUD   WSTEST
193#
194############################################################################
195# Field 6 : Current surface (o->a 6)
196O_OCury1 CURRENTY 321 86400  5  sstoc.nc  <output_mode>
197torc    tlmd  LAG=5760
198P  2 P  0
199LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE 
200 AVERAGE
201# CHECKIN: indicate computation of global, land and sea field integrals.
202 INT=1
203#
204wo2a.tsg 93  1 12
205# CHECKOUT: indicate computation of global, land and sea field integrals.
206 INT=1
207# 
208NORSUD   WSTEST
209############################################################################
210# Field 7 : Current surface (o->a 7)
211O_OCurz1 CURRENTZ 321 86400  5  sstoc.nc  <output_mode>
212torc    tlmd  LAG=5760
213P  2 P  0
214LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
215 AVERAGE
216# CHECKIN: indicate computation of global, land and sea field integrals.
217 INT=1
218#
219wo2a.tsg 93  1 12
220# CHECKOUT: indicate computation of global, land and sea field integrals.
221 INT=1 
222# 
223NORSUD   WSTEST
224#############################################################################
225#
226#                      ATMOSPHERE  --->>>  OCEAN
227#                      -------------------------
228############################################################################   
229# Field 8 : wind stress along X axis (a->o tau 1)
230#
231COTAUXXU O_OTaux1 23 86400  6  flxat.nc   <output_mode>
232tlmd    uorc  LAG=1800
233P  0 P  2
234INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
235# Reverse
236NORSUD WSTEST
237# CHECKIN: indicate computation of global, land and sea field integrals.
238 INT=1
239# Mask value
240888888.
241# Extrapolation method
242NINENN 2 1 1
243# Interpolation method
244BICUBIPS  Z   SCALAR
245# CHECKOUT: indicate computation of global, land and sea field integrals.
246 INT=1
247#
248###########################################################################
249# Field 9 : stress along Y axis (a->o tau 1)
250#
251COTAUYYU O_OTauy1 23 86400  6  flxat.nc  <output_mode>
252tlmd    uorc  LAG=1800
253P  0 P  2
254INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
255# Reverse
256NORSUD WSTEST
257# CHECKIN: indicate computation of global, land and sea field integrals.
258 INT=1
259# Mask value
260888888.
261# Extrapolation method
262NINENN 2 1 1
263# Interpolation method
264BICUBIPS  Z   SCALAR
265# CHECKOUT: indicate computation of global, land and sea field integrals.
266 INT=1
267#
268###########################################################################
269# Field 10 :wind stress along Z axis (a->o tau 1)
270#
271COTAUZZU O_OTauz1 23 86400  6  flxat.nc  <output_mode>
272tlmd    uorc  LAG=1800
273P  0 P  2
274INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
275# Reverse
276NORSUD WSTEST
277# CHECKIN: indicate computation of global, land and sea field integrals.
278 INT=1
279# Mask value
280888888.
281# Extrapolation method
282NINENN 2 1 1
283# Interpolation method
284BICUBIPS  Z   SCALAR
285# CHECKOUT: indicate computation of global, land and sea field integrals.
286 INT=1
287#
288##########################################################################
289# Field 11 : wind stress along X axis 2 (a->o tau 2)
290#
291COTAUXXV O_OTaux2 24 86400  6    flxat.nc  <output_mode>
292tlmd    vorc  LAG=1800
293P  0 P  2
294INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
295# Reverse
296NORSUD WSTEST
297# CHECKIN: indicate computation of global, land and sea field integrals.
298 INT=1
299# Mask value
300888888.
301# Extrapolation method
302NINENN 2 1 1
303# Interpolation method
304BICUBIPS  Z   SCALAR
305# CHECKOUT: indicate computation of global, land and sea field integrals.
306 INT=1
307#
308##########################################################################
309# Field 12 : wind stress along Y axis 2 (a->o tau 2)
310#
311COTAUYYV O_OTauy2 24 86400  6    flxat.nc  <output_mode>
312tlmd    vorc  LAG=1800
313P  0 P  2
314INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
315# Reverse
316NORSUD WSTEST
317# CHECKIN: indicate computation of global, land and sea field integrals.
318 INT=1
319# Mask value
320888888.
321# Extrapolation method
322NINENN 2 1 1
323# Interpolation method
324BICUBIPS  Z   SCALAR
325# CHECKOUT: indicate computation of global, land and sea field integrals.
326 INT=1
327#
328##########################################################################
329# Field 13 :  wind stress along Z axis 2 (a->o tau 2)
330#
331COTAUZZV O_OTauz2 24 86400  6    flxat.nc  <output_mode>
332tlmd    vorc  LAG=1800
333P  0 P  2
334INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
335# Reverse
336NORSUD WSTEST
337# CHECKIN: indicate computation of global, land and sea field integrals.
338 INT=1
339# Mask value
340888888.
341# Extrapolation method
342NINENN 2 1 1
343# Interpolation method
344BICUBIPS  Z   SCALAR
345# CHECKOUT: indicate computation of global, land and sea field integrals.
346 INT=1
347#
348#########################################################################
349# Field 14 : Total rain (a->o flx 7)
350#
351COTOTRAI OTotRain 26  86400  4   flxat.nc   <output_mode>
352tlmd    torc  LAG=1800
353P  0 P  2
354INVERT CHECKIN MOZAIC CHECKOUT
355# Reverse
356NORSUD WSTEST
357# CHECKIN: indicate computation of global, land and sea field integrals.
358 INT=1
359# Interpolation method ou parametres mozaic
360wa2o.flx 92  2   32
361# CHECKOUT: indicate computation of global, land and sea field integrals.
362 INT=1
363#
364##########################################################################
365# Field 15 :  Total snow (o->a flx 6)
366#
367COTOTSNO  OTotSnow 28  86400  4   flxat.nc   <output_mode>
368tlmd    torc  LAG=1800
369P  0 P  2
370INVERT CHECKIN MOZAIC CHECKOUT
371# Reverse
372NORSUD WSTEST
373# CHECKIN: indicate computation of global, land and sea field integrals.
374 INT=1
375# Interpolation method ou parametres mozaic
376wa2o.flx 92  2    32
377# CHECKOUT: indicate computation of global, land and sea field integrals.
378 INT=1
379#
380##########################################################################
381# Field 16 : Total evap (a->o flx 9)
382#
383COTOTEVA  OTotEvap  25 86400  4   flxat.nc   <output_mode>
384tlmd    torc  LAG=1800
385P  0 P  2
386INVERT CHECKIN MOZAIC CHECKOUT
387# Reverse
388NORSUD WSTEST
389# CHECKIN: indicate computation of global, land and sea field integrals.
390 INT=1
391# Interpolation method ou parametres mozaic
392wa2o.flx 92  2    32
393# CHECKOUT: indicate computation of global, land and sea field integrals.
394 INT=1
395#
396##########################################################################
397# Field 17 : Evaporation Ice  (a->o flx 8)
398#
399COICEVAP OIceEvap 41 86400  4   flxat.nc   <output_mode>
400tlmd    torc  LAG=1800
401P  0 P  2
402INVERT CHECKIN MOZAIC CHECKOUT
403# Reverse
404NORSUD WSTEST
405# CHECKIN: indicate computation of global, land and sea field integrals.
406 INT=1
407# Interpolation method ou parametres mozaic
408wa2o.flx 92  2    32
409# CHECKOUT: indicate computation of global, land and sea field integrals.
410 INT=1
411#
412##########################################################################
413# Field 18 : Total solar heat flux (a->o flx 2)
414#
415COQSRMIX  O_QsrMix  7 86400 4   flxat.nc  <output_mode>
416tlmd    torc  LAG=1800
417P  0 P  2
418INVERT CHECKIN MOZAIC CHECKOUT
419# Reverse
420NORSUD WSTEST
421# CHECKIN: indicate computation of global, land and sea field integrals.
422 INT=1
423# Interpolation method or mozaic parameters
424wa2o.flx 92  2  32
425# CHECKOUT: indicate computation of global, land and sea field integrals.
426 INT=1
427#
428#########################################################################
429# Field 19 : Total Non solar heat flux (a->o flx 4)
430#
431COQNSMIX  O_QnsMix 6 86400  4   flxat.nc  <output_mode>
432tlmd    torc   LAG=1800
433P  0 P  2
434INVERT CHECKIN MOZAIC CHECKOUT
435# Reverse
436NORSUD WSTEST
437# CHECKIN: indicate computation of global, land and sea field integrals.
438 INT=1
439# Interpolation method ou parametres mozaic
440wa2o.flx 92  2    32
441# CHECKOUT: indicate computation of global, land and sea field integrals.
442 INT=1
443#
444##########################################################################
445# Field 20 : solar heat flux on ice (a->o flx 1)
446#
447COSHFICE O_QsrIce  7 86400 4   flxat.nc  <output_mode>
448tlmd    torc  LAG=1800
449P  0 P  2
450INVERT CHECKIN MOZAIC CHECKOUT
451# Reverse
452NORSUD WSTEST
453# CHECKIN: indicate computation of global, land and sea field integrals.
454 INT=1
455# Interpolation method or mozaic parameters
456wa2o.flx 92  2    32
457# CHECKOUT: indicate computation of global, land and sea field integrals.
458 INT=1
459#
460##########################################################################
461# Field 21 : Non solar heat flux on ice (a->o flx 3)
462#
463CONSFICE  O_QnsIce 6 86400  4  flxat.nc  <output_mode>
464tlmd    torc  LAG=1800
465P  0 P  2
466INVERT CHECKIN MOZAIC CHECKOUT
467# Reverse
468NORSUD WSTEST
469# CHECKIN: indicate computation of global, land and sea field integrals.
470 INT=1
471# Interpolation method ou parametres mozaic
472wa2o.flx 92  2    32
473# CHECKOUT: indicate computation of global, land and sea field integrals.
474 INT=1
475#
476############################################################################
477# Field 22 : Non solar heat flux derivative (o->a flx 5)
478#
479CODFLXDT O_dQnsdT  35 86400  4   flxat.nc  <output_mode>
480tlmd    torc  LAG=1800
481P  0 P  2
482INVERT CHECKIN MOZAIC CHECKOUT
483# Reverse
484NORSUD WSTEST
485# CHECKIN: indicate computation of global, land and sea field integrals.
486 INT=1
487# Interpolation method ou parametres mozaic
488wa2o.flx 92  2    32
489# CHECKOUT: indicate computation of global, land and sea field integrals.
490 INT=1
491#
492###########################################################################
493# Field 23 : iceberg calving (a->o flx 12)
494#
495COCALVIN OCalving  36 86400  4  flxat.nc  <output_mode>
496tlmd    torc  LAG=1800
497P  0 P  2
498INVERT CHECKIN MOZAIC CHECKOUT
499# Reverse
500NORSUD WSTEST
501# CHECKIN: indicate computation of global, land and sea field integrals.
502 INT=1
503# Interpolation method ou parametres mozaic
504wa2o.cal  98   5   71
505# CHECKOUT: indicate computation of global, land and sea field integrals.
506 INT=1
507#
508############################################################################
509# Field 24 : liquid run-off (river + direct)  (a->o flx 11)
510#
511COLIQRUN  O_Runoff 32 86400  5  flxat.nc   <output_mode>
512tlmd    torc  LAG=1800
513P  0 P  2
514INVERT CHECKIN MOZAIC BLASNEW CHECKOUT
515# Reverse
516NORSUD WSTEST
517# CHECKIN: indicate computation of global, land and sea field integrals.
518 INT=1
519# Interpolation method ou parametres mozaic
520wa2o.run 94    4   513
521# change units from m/s to kg/s, change of sign
522# weights convert from kg/s to kg/m^2/s
5231000.0 0
524# CHECKOUT: indicate computation of global, land and sea field integrals.
525 INT=1
526#
527############################################################################
528# Field 25 : wind stress module (a->o flx 12)
529#
530##COTAUMOD  O_TauMod 466 86400  6   flxat.nc   <output_mode>
531##tlmd    torc  LAG=1800
532##P  0 P  2
533##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
534# Reverse
535##NORSUD WSTEST
536# CHECKIN: indicate computation of global, land and sea field integrals.
537## INT=1
538# Mask value
539##888888.
540# Extrapolation method
541##NINENN 2 1 1
542# Interpolation method
543##BICUBIPS  Z   SCALAR
544# CHECKOUT: indicate computation of global, land and sea field integrals.
545## INT=1
546#
547#########################################################################
548#
549 $END
Note: See TracBrowser for help on using the repository browser.