source: CONFIG/IPSLCM/IPSLCM5A/CpiControl/COMP/lmdz.driver @ 1316

Last change on this file since 1316 was 1316, checked in by cetlod, 12 years ago

Improvment of interactive scripts for IPSLCM5A_C configuration

File size: 12.2 KB
Line 
1#!/bin/ksh
2#-----------------------------------------------------------------
3function LMDZ_sed
4{
5    IGCM_debug_PushStack "LMDZ_sed"
6
7    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
8    RET=$?
9    echo "LMDZ_sed : ${1} ${2} ${3}"
10    \mv ${1}.tmp ${1}
11
12    IGCM_debug_PopStack "LMDZ_sed"
13    return $RET
14}
15
16function ATM_Initialize
17{
18    IGCM_debug_PushStack "ATM_Initialize"
19
20    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
21
22    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
23
24    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
25
26    ##-- Calendar type for LMDZ
27    case ${config_UserChoices_CalendarType} in
28        leap|gregorian)
29            CalendarTypeForLmdz=earth_366d;;
30        noleap)
31            CalendarTypeForLmdz=earth_365d;;
32        360d)
33            CalendarTypeForLmdz=earth_360d;;
34        *)
35            CalendarTypeForLmdz=earth_360d
36    esac
37
38    ##--Frequency purpose ....
39    ##--  Initialisation  ....
40    OK_instan=n
41    OK_journe=n
42    OK_mensuel=n
43    ok_hf=n
44
45    case ${config_UserChoices_PeriodLength} in
46        1Y|1y|1M|1m) OK_mensuel=y ;;
47        5D|5d|1D|1d) OK_journe=y ;;
48    esac
49
50    for frequency in ${config_ATM_WriteFrequency} ; do
51        case ${frequency} in
52            5D|5d|1D|1d) OK_journe=y ;;
53        esac
54        case ${frequency} in
55            HF|hf) ok_hf=y ;;
56        esac
57    done
58
59    ## Read LMDZ_NbPeriod_adjust option in lmdz.card
60    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_NbPeriod_adjust
61    LMDZ_NbPeriod_adjust=${lmdz_UserChoices_LMDZ_NbPeriod_adjust}
62
63    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
64        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_Bands_file_name
65        LMDZ_Bands_file_name=${lmdz_UserChoices_LMDZ_Bands_file_name}
66    fi
67
68    ##  Read LMDZ_Freq_aero and LMDZ_Length_aero in lmdz.card
69    LMDZ_Freq_aero=${lmdz_UserChoices_LMDZ_Freq_aero}
70    LMDZ_Length_aero=${lmdz_UserChoices_LMDZ_Length_aero}
71
72    ##  Read LMDZ_COSP_monthly  LMDZ_COSP_daily and LMDZ_COSP_hf in lmdz.card
73    LMDZ_COSP_OK=${lmdz_UserChoices_LMDZ_COSP_OK}
74    LMDZ_COSP_monthly=${lmdz_UserChoices_LMDZ_COSP_monthly}
75    LMDZ_COSP_daily=${lmdz_UserChoices_LMDZ_COSP_daily}
76    LMDZ_COSP_hf=${lmdz_UserChoices_LMDZ_COSP_hf}
77
78    ##  Read LMDZ_NMC_monthly  LMDZ_NMC_daily and LMDZ_NMC_hf in lmdz.card
79    LMDZ_NMC_monthly=${lmdz_UserChoices_LMDZ_NMC_monthly}
80    LMDZ_NMC_daily=${lmdz_UserChoices_LMDZ_NMC_daily}
81    LMDZ_NMC_hf=${lmdz_UserChoices_LMDZ_NMC_hf}
82
83    IGCM_debug_PopStack "ATM_Initialize"
84}
85
86#-----------------------------------------------------------------
87function ATM_Update
88{
89    IGCM_debug_PushStack "ATM_Update"
90
91    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
92    typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
93
94    case ${config_UserChoices_PeriodLength} in
95        *Y|*y) 
96               LMDZ_ecrit_mth=30.
97               LMDZ_ecrit_ISCCP=30.
98               LMDZ_periodav=30.
99               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
100                  echo Change calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d
101                  exit
102               fi
103               ;;
104        *)
105               LMDZ_ecrit_mth=${PeriodLengthInDays}.
106               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
107               LMDZ_periodav=${PeriodLengthInDays}.
108               ;;
109    esac
110
111    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
112    if [ ${CumulPeriod} -eq 1 ] ; then
113        RAZ_DATE=1
114    else
115        RAZ_DATE=0
116    fi
117
118    ## algo : For CumulPeriod=1 ;
119    ##        IF NbPeriod_Adjust = 0, Get Bands file directly from server, store it with _0 suffix
120    ##        ELSE LMDZ_adjust=y ; save Bands file on file server ;
121    ##        For CumulPeriod=2 to LMDZ_NbPeriod_adjust ; Get Bands file from server (CumulPeriod-1) ; LMDZ_adjust=y ; save Bands file on file server ;
122    ##        For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from server (CumulPeriod=LMDZ_NbPeriod_adjust 0 to force it) ; Use Bands ;
123
124    if [ ${CumulPeriod} -eq 1 ] ; then
125        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
126            IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
127            IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
128            IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
129        fi
130    fi
131
132    LMDZ_adjust=n
133    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y
134
135    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
136    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 
137
138    [ ${CumulPeriod} -gt 1 ] && ( IGCM_sys_Get ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat )
139
140     ##-- GHG forcing for the current year
141
142    if ( ${FirstInitialize} ) ; then
143        ##--Initialization of fluxes to an undefined value at the first run
144        UndefinedValueCo2=-9999
145        InitPeriodCo2=0
146        InitDateBeginCo2=${UndefinedValueCo2}
147        InitYearCo2=$(( ${year} - 1 )) 
148        InitDateEndCo2=${InitYearCo2}1231
149        fCO2_ff=${UndefinedValueCo2} 
150        CO2SBG=${UndefinedValueCo2}
151        CO2LU=${UndefinedValueCo2}
152        CO2MBG=${UndefinedValueCo2}
153        CO2_ppm_prec=${UndefinedValueCo2}
154        # Get the initial value of atmosp. pco2
155        CO2_ppm=${lmdz_UserChoices_co2_init}
156
157        IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
158        IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
159   
160        # Save CO2 values in ExeCpuLog variable contents 5 fields
161        echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
162             gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
163                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
164   
165        # Get the path where the log file co2.log is
166        PathCO2log=${SUBMIT_DIR} 
167        # Get Previous line in co2.log
168        PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
169
170    else
171        # Get restart line in co2.log
172        PathCO2log=${SUBMIT_DIR}
173        PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log ) 
174        # Get the value of atmosp. pco2 in co2.log
175        CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
176
177    fi
178
179    ## physiq.def parameters modified from initial physiq_L${RESOL_ATM_Z}
180    LMDZ_sed physiq.def OK_instan   ${OK_instan}
181    LMDZ_sed physiq.def OK_journe   ${OK_journe}
182    LMDZ_sed physiq.def OK_mensuel  ${OK_mensuel}
183    LMDZ_sed physiq.def ok_hf       ${ok_hf}
184    LMDZ_sed physiq.def ecrit_mth   ${LMDZ_ecrit_mth}
185    LMDZ_sed physiq.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
186    LMDZ_sed physiq.def ok_cosp     ${LMDZ_COSP_OK}
187    LMDZ_sed physiq.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
188    LMDZ_sed physiq.def ok_journeCOSP   ${LMDZ_COSP_daily}
189    LMDZ_sed physiq.def ok_hfCOSP   ${LMDZ_COSP_hf}
190    LMDZ_sed physiq.def ok_histNMC  "${LMDZ_NMC_monthly}, ${LMDZ_NMC_daily}, ${LMDZ_NMC_hf}"
191#   For Control, we won't modify ATM CO2 :
192#    LMDZ_sed physiq.def co2_ppm     ${CO2_ppm}
193
194    ## gcm.def parameters : no change since gcm.def_${RESOL_ATM_3D} is used and already modified
195
196    ## run.def parameters
197    LMDZ_sed run.def dayref   ${InitDay}
198    LMDZ_sed run.def anneeref ${InitYear}
199    LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
200    LMDZ_sed run.def nday     ${PeriodLengthInDays}
201    LMDZ_sed run.def raz_date ${RAZ_DATE}
202    LMDZ_sed run.def periodav ${LMDZ_periodav}
203    LMDZ_sed run.def adjust   ${LMDZ_adjust}
204
205    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
206    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta
207    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
208    if [ ${ByPass_hgardfou_teta} = y ] ; then
209        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
210        IGCM_sys_Mv gcm.def.tmp gcm.def
211        echo
212        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
213        echo
214        cat gcm.def
215        ByPass_hgardfou_teta=n
216        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
217    fi
218
219    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
220    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats
221    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
222    if [ ${ByPass_hgardfou_mats} = y ] ; then
223        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
224        IGCM_sys_Mv gcm.def.tmp gcm.def
225        echo
226        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
227        echo
228        cat gcm.def
229        ByPass_hgardfou_mats=n
230        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
231    fi
232
233    if ( ${FirstInitialize} ) ; then
234
235        if ( [ "${config_Restarts_OverRule}" = "n" ] && [ "${config_ATM_Restart}" = "n" ] ); then
236            if [ ${DRYRUN} -le 2 ] ; then
237                ##-- suppression of ozone file construction --
238                cp physiq.def physiq.def.save
239                LMDZ_sed physiq.def read_climoz 0
240                IGCM_sys_Cp ${R_EXE}/create_etat0_limit.e ${RUN_DIR}/.
241                if [ ${DRYRUN} -le 1 ] ; then
242                    ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e
243                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
244                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
245                fi
246                IGCM_sys_Mv physiq.def.save physiq.def
247            else
248                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated"
249                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated for DRYRUN = " $DRYRUN >> stack
250            fi
251        fi
252
253    fi
254
255    IGCM_debug_PopStack "ATM_Update"
256}
257
258#-----------------------------------
259function ATM_Finalize
260{
261    IGCM_debug_PushStack "ATM_Finalize"
262
263    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
264
265    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
266
267    # For Control, no fossil fuel emission :
268    fCO2_ff=0
269    echo "Fossil Fuel for control run  :" ${fCO2_ff}
270
271    # Get the value of ocean carbon flux
272    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
273    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
274    echo "Ocean carbon flux  :" ${CO2MBG}
275
276    # Get the value of land fluxes
277    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
278    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
279    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
280    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
281    echo "Land carbon flux (NEP)         :" ${CO2SRF}
282    echo "LU flux          (FLUC)        :" ${CO2LU}
283    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
284
285    # Previous CO2
286    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
287    echo "Previous CO2  :" ${CO2_ppm_prec}
288   
289    # Formula
290    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
291    echo "New CO2  :" ${CO2_ppm}
292
293    # Save CO2 values in ExeCpuLog variable contents 5 fields
294    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
295         gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
296                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
297
298    echo FINALIZE ATM !
299
300    IGCM_debug_PopStack "ATM_Finalize"
301}
Note: See TracBrowser for help on using the repository browser.