source: CONFIG/IPSLCM/IPSLCM5A/piControl/COMP/lmdz.card @ 984

Last change on this file since 984 was 984, checked in by mafoipsl, 14 years ago

Updated piControl directory hosting simulation having preindustrial setup.
File size: 5.3 KB
Line 
1[Compatibility]
2libIGCM=1.0
3
4[UserChoices]
5ByPass_hgardfou_teta=n
6ByPass_hgardfou_mats=n
7LMDZ_NbPeriod_adjust=3
8# LMDZ_NbPeriod_adjust=0
9# To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment
10# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3
11
12# To force higher writing level for aerosol.
13# LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,
14# LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).
15# To cancel this option put LMDZ_Length_aero=0
16LMDZ_Freq_aero=120
17LMDZ_Length_aero=12
18
19[InitialStateFiles]
20List=   (${R_INIT}/ATM/${config_UserChoices_TagName}/Albedo.nc, .), \
21        (${R_INIT}/ATM/${config_UserChoices_TagName}/amipbc_sic_1x1_clim.nc, amipbc_sic_1x1.nc), \
22        (${R_INIT}/ATM/${config_UserChoices_TagName}/amipbc_sst_1x1_clim.nc, amipbc_sst_1x1.nc), \
23        (${R_INIT}/ATM/${config_UserChoices_TagName}/ECDYN.nc.20020101,      ECDYN.nc), \
24        (${R_INIT}/ATM/${config_UserChoices_TagName}/ECPHY.nc,      .), \
25        (${R_INIT}/ATM/${config_UserChoices_TagName}/Relief.nc,     .), \
26        (${R_INIT}/ATM/${config_UserChoices_TagName}/Rugos.nc,      .), \
27        (${R_INIT}/ATM/${config_UserChoices_TagName}/landiceref.nc, .), \
28        (${R_INIT}/ATM/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/o2a.nc, .)
29
30[BoundaryFiles]
31List=   ()
32# With AR5 aerosols (including ASSO4M(=SO4), CSSO4M, AIBCM, ASBCM, AIPOMM, ASPOMM, ASSSM, CSSSM, SSSSM, CIDUSTM)
33# With AR5 ozone(tropo + strato from LMDZOR-INCA-REPROBUS simulations)
34ListNonDel= (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_1855.nc, aerosols.nat.nc),\
35            (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/climoz_LMDZ_1855.nc, climoz_LMDZ.nc)
36
37[ParametersFiles]
38List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}, physiq.def), \
39        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),    \
40        (${SUBMIT_DIR}/PARAM/run.def, .), \
41        (${SUBMIT_DIR}/PARAM/traceur.def, .)
42
43[RestartFiles]
44List=   (restart.nc, restart.nc, start.nc), \
45        (restartphy.nc, restartphy.nc,  startphy.nc)
46
47[OutputText]
48List=   (lmdz.x.prt)
49
50[OutputFiles]
51List=   (histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,      Post_1M_histmth), \
52        (histNMC.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histNMC.nc,      Post_1M_histNMC), \
53        (dynzon.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_dynzon.nc,       NONE), \
54        (histday.nc,      ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,      Post_1D_histday), \
55        (histhf.nc,       ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,       Post_HF_histhf)
56
57[Post_1M_histmth]
58Patches= (Patch_20091030_histcom_time_axis)
59GatherWithInternal = (lon, lat, presnivs, time_counter, aire)
60TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux_ter, taux_sic, taux_lic, taux_oce, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic)
61ChunckJob2D = NONE
62TimeSeriesVars3D = (upwd, lwcon, iwcon, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, ozone, ozone_daylight)
63ChunckJob3D = 100Y
64Seasonal=ON
65
66[Post_1M_histNMC]
67Patches = ()
68GatherWithInternal = (lon, lat, presnivs, time_counter, aire)
69TimeSeriesVars2D = ()
70ChunckJob2D = NONE
71TimeSeriesVars3D = (temp, phi, q, u, v, rh)
72ChunckJob3D = NONE
73Seasonal=OFF
74
75[Post_1M_dynzon]
76Patches = ()
77GatherWithInternal = (lon, lat, presnivs, time_counter)
78TimeSeriesVars2D = ()
79ChunckJob2D = NONE
80TimeSeriesVars3D = ()
81ChunckJob3D = NONE
82Seasonal=OFF
83
84[Post_1D_histday]
85Patches= (Patch_20091030_histcom_time_axis)
86GatherWithInternal = (lon, lat, presnivs, time_counter)
87TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, iwp, lwp, phi500, precip, pluc, plul, prw, psol, rh2m, q2m, sens, sicf, slp, soll, sols, SWdnSFC, taux, tauy, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max, u850, v850, w850, phi850, q850, t850, u700, v700, w700, phi700, q700, t700, u500, v500, w500, phi500, q500, t500, u200, v200, w200, phi200, q200, t200)
88ChunckJob2D = NONE
89TimeSeriesVars3D = (temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres)
90ChunckJob3D = OFF
91Seasonal=OFF
92
93[Post_HF_histhf]
94Patches= (Patch_20091030_histcom_time_axis)
95GatherWithInternal = (lon, lat, presnivs, time_counter)
96TimeSeriesVars2D = (cldt, psol, q2m, slp, SWnetOR, SWdownOR, LWdownOR, precip, pluc, plul, prw, t2m, tsol, u10m, v10m, t1000, t925, t850, t700, t500, t300, t250, t200, t150, t100, t50, t30, t10, u1000, u925, u850, u700, u500, u300, u250, u200, u150, u100, u50, u30, u10, v1000, v925, v850, v700, v500, v300, v250, v200, v150, v100, v50, v30, v10, phi1000, phi925, phi850, phi700, phi500, phi300, phi250, phi200, phi150, phi100, phi50, phi30, phi10, w1000, w925, w850, w700, w500, w300, w250, w200, w150, w100, w50, w30, w10, q1000, q925, q850, q700, q500, q300, q250, q200, q150, q100, q50, q30, q10)
97ChunckJob2D = OFF
98TimeSeriesVars3D = (temp, theta, ovap, ovapinit, vitu, vitv)
99ChunckJob3D = OFF
100Seasonal=OFF
Note: See TracBrowser for help on using the repository browser.