source: CONFIG/IPSLCM/IPSLCM5A/piControl/COMP/lmdz.card @ 992

Last change on this file since 992 was 992, checked in by sdipsl, 14 years ago
  • Some homogenization between directory regarding :
    • SmoothFiles? section
    • variables
    • physiq.def and LMDZ new files
File size: 5.1 KB
Line 
1[Compatibility]
2libIGCM=1.0
3
4[UserChoices]
5ByPass_hgardfou_teta=n
6ByPass_hgardfou_mats=n
7LMDZ_NbPeriod_adjust=3
8# LMDZ_NbPeriod_adjust=0
9# To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment
10# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3
11
12# To force higher writing level for aerosol.
13# LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,
14# LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).
15# To cancel this option put LMDZ_Length_aero=0
16LMDZ_Freq_aero=120
17LMDZ_Length_aero=12
18
19[InitialStateFiles]
20List=   (${R_INIT}/ATM/${config_UserChoices_TagName}/Albedo.nc, .), \
21        (${R_INIT}/ATM/${config_UserChoices_TagName}/amipbc_sic_1x1_clim.nc, amipbc_sic_1x1.nc), \
22        (${R_INIT}/ATM/${config_UserChoices_TagName}/amipbc_sst_1x1_clim.nc, amipbc_sst_1x1.nc), \
23        (${R_INIT}/ATM/${config_UserChoices_TagName}/ECDYN.nc.20020101,      ECDYN.nc), \
24        (${R_INIT}/ATM/${config_UserChoices_TagName}/ECPHY.nc,      .), \
25        (${R_INIT}/ATM/${config_UserChoices_TagName}/Relief.nc,     .), \
26        (${R_INIT}/ATM/${config_UserChoices_TagName}/Rugos.nc,      .), \
27        (${R_INIT}/ATM/${config_UserChoices_TagName}/landiceref.nc, .), \
28        (${R_INIT}/ATM/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/o2a.nc, .)
29
30[BoundaryFiles]
31List=   ()
32# With AR5 aerosols (including ASSO4M(=SO4), CSSO4M, AIBCM, ASBCM, AIPOMM, ASPOMM, ASSSM, CSSSM, SSSSM, CIDUSTM)
33# With AR5 ozone(tropo + strato from LMDZOR-INCA-REPROBUS simulations)
34ListNonDel= (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_1855.nc, aerosols.nat.nc),\
35            (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/climoz_LMDZ_1855.nc, climoz_LMDZ.nc)
36
37[SmoothFiles]
38List=   ()
39
40[ParametersFiles]
41List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}, physiq.def), \
42        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),    \
43        (${SUBMIT_DIR}/PARAM/run.def, .), \
44        (${SUBMIT_DIR}/PARAM/traceur.def, .)
45
46[RestartFiles]
47List=   (restart.nc, restart.nc, start.nc), \
48        (restartphy.nc, restartphy.nc,  startphy.nc)
49
50[OutputText]
51List=   (lmdz.x.prt)
52
53[OutputFiles]
54List=   (histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,      Post_1M_histmth), \
55        (histmthNMC.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,   Post_1M_histmthNMC), \
56        (dynzon.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_dynzon.nc,       NONE), \
57        (histday.nc,      ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,      Post_1D_histday), \
58        (histhf.nc,       ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,       Post_HF_histhf)
59
60[Post_1M_histmth]
61Patches= (Patch_20091030_histcom_time_axis)
62GatherWithInternal = (lon, lat, presnivs, time_counter, aire)
63TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux_ter, taux_sic, taux_lic, taux_oce, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic)
64ChunckJob2D = NONE
65TimeSeriesVars3D = (upwd, lwcon, iwcon, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, ozone, ozone_daylight)
66ChunckJob3D = 100Y
67Seasonal=ON
68
69[Post_1M_histmthNMC]
70Patches = ()
71GatherWithInternal = (lon, lat, plev, time_counter)
72TimeSeriesVars2D = ()
73ChunckJob2D = NONE
74TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap, psbg, uv, vq, vT, wq, vphi, wT, uxu, vxv, TxT)
75ChunckJob3D = OFF
76Seasonal=ON
77
78[Post_1M_dynzon]
79Patches = ()
80GatherWithInternal = (lon, lat, presnivs, time_counter)
81TimeSeriesVars2D = ()
82ChunckJob2D = NONE
83TimeSeriesVars3D = ()
84ChunckJob3D = NONE
85Seasonal=OFF
86
87[Post_1D_histday]
88Patches= (Patch_20091030_histcom_time_axis)
89GatherWithInternal = (lon, lat, presnivs, time_counter)
90TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, iwp, lwp, phi500, precip, pluc, plul, prw, psol, rh2m, q2m, sens, sicf, slp, soll, sols, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max, u850, v850, w850, phi850, q850, t850, u700, v700, w700, phi700, q700, t700, u500, v500, w500, phi500, q500, t500, u200, v200, w200, phi200, q200, t200)
91ChunckJob2D = NONE
92TimeSeriesVars3D = (temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres)
93ChunckJob3D = OFF
94Seasonal=OFF
95
96[Post_HF_histhf]
97Patches= (Patch_20091030_histcom_time_axis)
98GatherWithInternal = (lon, lat, presnivs, time_counter)
99TimeSeriesVars2D = (cldt, psol, q2m, slp, SWnetOR, SWdownOR, LWdownOR, precip, pluc, plul, t2m, tsol, u10m, v10m, t850, t700, t500, t200, t50, t10, u850, u700, u500, u200, u50, u10, v850, v700, v500, v200, v50, v10, phi850, phi700, phi200, phi50, phi10, w850, w700, w500, w200, w50, w10, q850, q700, q500, q200, q50, q10)
100ChunckJob2D = OFF
101TimeSeriesVars3D = (temp, theta, ovap, ovapinit, vitu, vitv)
102ChunckJob3D = OFF
103Seasonal=OFF
Note: See TracBrowser for help on using the repository browser.