source: CONFIG/IPSLCM/IPSLCM5B/historical/config.card @ 1220

Last change on this file since 1220 was 1220, checked in by lfairhead, 11 years ago

Modifications needed to take advantage of the split in physiq.def in LMDZ.
The old physiq.def is split in 2: a shorter physiq.def that only includes
parameters and constants needed by the parametrizations and a config.def that
includes information related to the configuration one wishes to run (e.g. orbital
parameters, gaz constants, aerosols, etc...). The output.def is also taken into account

Warning: work in progress. Probably still needs some testing. Tested on brodie for the moment

File size: 6.8 KB
Line 
1#
2# This is config.card file for IPSLCM5A configuration
3#
4#========================================================================
5#D-- Compatibility -
6[Compatibility]
7libIGCM=1.0
8#D-- UserChoices -
9[UserChoices]
10#============================
11JobName=EXP00
12#----- Short Name of Experiment
13ExperimentName=historical
14#----- DEVT TEST PROD
15SpaceName=PROD
16LongName="IPSLCM5B CMIP5 DEVT phase historical example with large outputs"
17TagName=IPSLCM5B
18#============================
19#-- leap, noleap, 360d
20CalendarType=noleap
21#-- Experiment dates : Beginning and ending
22#-- "YYYY-MM-DD"
23DateBegin=1850-01-01
24DateEnd=1850-12-31
25#============================
26#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation
27PeriodLength=1M
28#============================
29#-- PBS Class (required on brodie mono/multi)
30#JobClass=mono
31JobClass=multi
32#============================
33#-- Total Number of Processors (minimum is 2 for a coupled configuration)
34#JobNumProcTot=2
35JobNumProcTot=4
36#============================
37#-- Run Options : here for oasis coupling
38JobRunOptions='-f'
39#-- for vargas
40#JobRunOptions='"-pgmmodel MPMD -cmdfile"'
41#============================
42# config.card configuration options :
43#R_INIT=/u/rech/psl/rpsl035/IGCM/INIT
44#R_INIT=/dmnfs/cont003/p86ipsl/IGCM/INIT
45#R_BC=/u/rech/psl/rpsl035/IGCM/BC
46#R_BC=/dmnfs/cont003/p86ipsl/IGCM/BC
47#============================
48
49#========================================================================
50#D-- Restarts -
51[Restarts]
52#D- by default: config.card describes no restart for all components
53#D-             ie start from Levitus or limit files
54#D- If you want to restart all components from the same simulation,
55#D-      put OveRule flag to 'y' and set the next 3 parameters
56OverRule=y
57#D- Last day of the experience used as restart for all components
58RestartDate=1899-12-31
59#D- Define restart simulation name for all components
60# For historical simulation you have to start from an other simulation
61RestartJobName=XXXXXXX
62#D- Path Server Group Login
63RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
64
65#========================================================================
66#D-- ATM -
67[ATM]
68#
69WriteFrequency="1M 1D HF"
70# If config_Restarts_OverRule == 'n' next 4 params are read
71Restart= n
72# Last day of the experience used as restart for this component if Restart=y
73RestartDate=1899-12-31
74# Define restart simulation name for this component
75RestartJobName=EXP00
76RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
77# Old component name for restart (if empty, use new name)
78OldName=
79
80#========================================================================
81#D-- OCE -
82[OCE]
83WriteFrequency="1M 1D"
84# If config_Restarts_OverRule == 'n' next 4 params are read
85Restart= n
86##-- Last day of the experience used as restart for this component if Restart=y
87RestartDate=1899-12-31
88# Define restart simulation name for this component
89RestartJobName=EXP00
90RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
91# Old component name for restart (if empty, use new name)
92OldName=
93
94#========================================================================
95#D-- ICE -
96[ICE]
97WriteFrequency="1M 1D"
98# If config_Restarts_OverRule == 'n' next 4 params are read
99Restart= n
100##-- Last day of the experience used as restart for this component if Restart=y
101RestartDate=1899-12-31
102# Define restart simulation name for this component
103RestartJobName=EXP00           
104RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
105# Old component name for restart (if empty, use new name)
106OldName=
107
108#========================================================================
109#D-- MBG -
110[MBG]
111WriteFrequency="1M"
112# If config_Restarts_OverRule == 'n' next 4 params are read
113Restart= n
114##-- Last day of the experience used as restart for this component if Restart=y
115RestartDate=1990-12-31
116# Define restart simulation name
117RestartJobName=EXP00
118RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
119# Old component name for restart (if empty, use new name)
120OldName=
121
122#========================================================================
123#D-- SRF -
124[SRF]
125WriteFrequency="1M HF"
126# If config_Restarts_OverRule == 'n' next 4 params are read
127Restart=n
128##-- Last day of the experience used as restart for this component if Restart=y
129RestartDate=1899-12-31
130# Define restart simulation name for this component
131RestartJobName=EXP00
132RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
133#-- Old component name for restart (if empty, use new name)
134OldName=
135
136#========================================================================
137#D-- SBG - STOMATE
138[SBG]
139WriteFrequency="1M"
140# If config_Restarts_OverRule == 'n' next 4 params are read
141Restart=n
142#-- Last day of the experience used as restart for this component if Restart=y
143RestartDate=1899-12-31
144# Define restart simulation name for this component
145RestartJobName=EXP00
146RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
147#-- Old component name for restart (if empty, use new name)
148OldName=
149
150#========================================================================
151#D-- CPL -
152[CPL]
153WriteFrequency="1M 1D"
154# If config_Restarts_OverRule == 'n' next 4 params are read
155Restart= n
156##-- Last day of the experience used as restart for this component if Restart=y
157RestartDate=1899-12-31
158# Define restart simulation name for this component
159RestartJobName=EXP00
160RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
161# Old component name for restart (if empty, use new name)
162OldName=
163
164#========================================================================
165#D-- ListOfComponents -
166[ListOfComponents]
167#D- For each component, Name of component, Tag of component
168ATM= (lmdz, LMDZ4-dev)
169SRF= (orchidee, ORCHIDEE_1_9_5)
170SBG= (stomate, ORCHIDEE_1_9_5)
171OCE= (opa9, CMIP5_IPSL)
172ICE= (lim2, CMIP5_IPSL)
173MBG= (pisces, CMIP5_IPSL)
174CPL= (oasis, OASIS3)
175
176#========================================================================
177#D-- Executable -
178[Executable]
179Name=run_file
180#D- For each component, Real name of executable, Name of executable for oasis
181ATM= (gcm.e, lmdz.x)
182SRF= ("", "")
183SBG= ("", "")
184OCE= (opa, opa.xx)
185ICE= ("", "")
186MBG= ("", "")
187CPL= (oasis, oasis)
188
189#========================================================================
190#D-- Post -
191[Post]
192#D- Do we rebuild parallel output, this flag determines
193#D- frequency of rebuild submission (use NONE for DRYRUN=3)
194RebuildFrequency=5Y
195#D- Do we rebuild parallel output from archive (use NONE to use SCRATCHDIR as buffer)
196RebuildFromArchive=true
197#D- If you want to produce time series, this flag determines
198#D- frequency of post-processing submission (NONE if you don't want)
199TimeSeriesFrequency=10Y
200#D- If you want to produce seasonal average, this flag determines
201#D- the period of this average (NONE if you don't want)
202SeasonalFrequency=10Y
203#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
204#D- Usefull if you do not want to consider the first X simulation's years
205SeasonalFrequencyOffset=0
206
207#========================================================================
Note: See TracBrowser for help on using the repository browser.