source: CONFIG/IPSLCM/IPSLCM5_v4/USER_SPEC/IPSLCM5/Chistorical/config.card @ 1645

Last change on this file since 1645 was 1620, checked in by jgipsl, 13 years ago

Updated IPSLCM5_v4 configuration with same modifcation as done in IPSLCM5A. Now IPSLCM5_v45 corresponds to IPSLCMA rev 1607(latest version today).

  • stomate.card : same modification as rev 1572
  • lmdz.driver : same modification as rev 1591
  • BB_make* : same modification as rev 1595
  • config.card, AA_make : same modification as rev 1607


File size: 7.0 KB
Line 
1#
2# This is config.card file for IPSLCM5A configuration
3#
4#========================================================================
5#D-- Compatibility -
6[Compatibility]
7libIGCM=1.0
8#D-- UserChoices -
9[UserChoices]
10#============================
11JobName=Chistorical00
12#----- Short Name of Experiment
13ExperimentName=historical
14#----- DEVT TEST PROD
15SpaceName=DEVT
16LongName="IPSLCM5A CMIP5 DEVT phase historical example with large outputs"
17TagName=IPSLCM5A
18UserSpec=IPSLCM5/Chistorical
19#============================
20#-- leap, noleap, 360d
21CalendarType=noleap
22#-- Experiment dates : Beginning and ending
23#-- "YYYY-MM-DD"
24DateBegin=1850-01-01
25DateEnd=1850-12-31
26#============================
27#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation
28PeriodLength=1M
29#============================
30#-- PBS Class (required on brodie mono/multi)
31#JobClass=mono
32JobClass=multi
33#============================
34#-- Total Number of Processors (minimum is 2 for a coupled configuration)
35#JobNumProcTot=4
36JobNumProcTot=32
37#============================
38#-- Run Options : here for oasis coupling
39JobRunOptions='-f'
40#-- for vargas
41#JobRunOptions='"-pgmmodel MPMD -cmdfile"'
42#============================
43# config.card configuration options :
44#R_INIT=/u/rech/psl/rpsl035/IGCM/INIT
45#R_INIT=/dmnfs/cont003/p86ipsl/IGCM/INIT
46#R_BC=/u/rech/psl/rpsl035/IGCM/BC
47#R_BC=/dmnfs/cont003/p86ipsl/IGCM/BC
48#============================
49
50#========================================================================
51#D-- Restarts -
52[Restarts]
53#D- by default: config.card describes no restart for all components
54#D-             ie start from Levitus or limit files
55#D- If you want to restart all components from the same simulation,
56#D-      put OveRule flag to 'y' and set the next 3 parameters
57OverRule=y
58#D- Last day of the experience used as restart for all components
59RestartDate=1850-12-31
60#D- Define restart simulation name for all components
61# For historical simulation you have to start from an other simulation
62RestartJobName=CpiControl00
63#D- Path Server Group Login
64RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/CpiControl
65
66#========================================================================
67#D-- ATM -
68[ATM]
69#
70WriteFrequency="1M 1D HF HF3h HF3hm"
71# If config_Restarts_OverRule == 'n' next 4 params are read
72Restart= n
73# Last day of the experience used as restart for this component if Restart=y
74RestartDate=1899-12-31
75# Define restart simulation name for this component
76RestartJobName=EXP00
77RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
78# !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
79SubmitRestartPath=${SUBMIT_DIR}/../CpiControl
80# Old component name for restart (if empty, use new name)
81OldName=
82
83#========================================================================
84#D-- OCE -
85[OCE]
86WriteFrequency="1M 1D"
87# If config_Restarts_OverRule == 'n' next 4 params are read
88Restart= n
89##-- Last day of the experience used as restart for this component if Restart=y
90RestartDate=1899-12-31
91# Define restart simulation name for this component
92RestartJobName=EXP00
93RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
94# Old component name for restart (if empty, use new name)
95OldName=
96
97#========================================================================
98#D-- ICE -
99[ICE]
100WriteFrequency="1M 1D"
101# If config_Restarts_OverRule == 'n' next 4 params are read
102Restart= n
103##-- Last day of the experience used as restart for this component if Restart=y
104RestartDate=1899-12-31
105# Define restart simulation name for this component
106RestartJobName=EXP00           
107RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
108# Old component name for restart (if empty, use new name)
109OldName=
110
111#========================================================================
112#D-- MBG -
113[MBG]
114WriteFrequency="1M"
115# If config_Restarts_OverRule == 'n' next 4 params are read
116Restart= n
117##-- Last day of the experience used as restart for this component if Restart=y
118RestartDate=1990-12-31
119# Define restart simulation name
120RestartJobName=EXP00
121RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
122# Old component name for restart (if empty, use new name)
123OldName=
124
125#========================================================================
126#D-- SRF -
127[SRF]
128WriteFrequency="1M HF"
129# If config_Restarts_OverRule == 'n' next 4 params are read
130Restart=n
131##-- Last day of the experience used as restart for this component if Restart=y
132RestartDate=1899-12-31
133# Define restart simulation name for this component
134RestartJobName=EXP00
135RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
136#-- Old component name for restart (if empty, use new name)
137OldName=
138
139#========================================================================
140#D-- SBG - STOMATE
141[SBG]
142WriteFrequency="1M"
143# If config_Restarts_OverRule == 'n' next 4 params are read
144Restart=n
145#-- Last day of the experience used as restart for this component if Restart=y
146RestartDate=1899-12-31
147# Define restart simulation name for this component
148RestartJobName=EXP00
149RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
150#-- Old component name for restart (if empty, use new name)
151OldName=
152
153#========================================================================
154#D-- CPL -
155[CPL]
156WriteFrequency="1M 1D"
157# If config_Restarts_OverRule == 'n' next 4 params are read
158Restart= n
159##-- Last day of the experience used as restart for this component if Restart=y
160RestartDate=1899-12-31
161# Define restart simulation name for this component
162RestartJobName=EXP00
163RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
164# Old component name for restart (if empty, use new name)
165OldName=
166
167#========================================================================
168#D-- ListOfComponents -
169[ListOfComponents]
170#D- For each component, Name of component, Tag of component
171ATM= (lmdz, LMDZ4-dev)
172SRF= (orchidee, ORCHIDEE_1_9_5)
173SBG= (stomate, ORCHIDEE_1_9_5)
174OCE= (opa9, CMIP5_IPSL)
175ICE= (lim2, CMIP5_IPSL)
176MBG= (pisces, CMIP5_IPSL)
177CPL= (oasis, OASIS3)
178
179#========================================================================
180#D-- Executable -
181[Executable]
182Name=run_file
183#D- For each component, Real name of executable, Name of executable for oasis
184ATM= (gcm.e, lmdz.x)
185SRF= ("", "")
186SBG= ("", "")
187OCE= (opa, opa.xx)
188ICE= ("", "")
189MBG= ("", "")
190CPL= (oasis, oasis)
191
192#========================================================================
193#D-- Post -
194[Post]
195#D- Do we rebuild parallel output, this flag determines
196#D- frequency of rebuild submission (use NONE for DRYRUN=3)
197RebuildFrequency=1Y
198#D- Do we rebuild parallel output from archive (use true on vargas )
199RebuildFromArchive=NONE
200#D- If you want to produce time series, this flag determines
201#D- frequency of post-processing submission (NONE if you don't want)
202TimeSeriesFrequency=10Y
203#D- If you want to produce seasonal average, this flag determines
204#D- the period of this average (NONE if you don't want)
205SeasonalFrequency=10Y
206#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
207#D- Usefull if you do not want to consider the first X simulation's years
208SeasonalFrequencyOffset=0
209
210#========================================================================
Note: See TracBrowser for help on using the repository browser.