source: CONFIG/LMDZ/branches/LMDZ/COMP/lmdz.card @ 541

Last change on this file since 541 was 541, checked in by jgipsl, 13 years ago

Added LMDZ4 forced configuration using the "old physics" of LMDZ with
possiblity to later add a second set parameter files to run "new
physics" in the same configuration. This configuration is adapted to the
latest LMDZ trunk version.

File size: 6.3 KB
Line 
1# $Id$
2
3[Compatibility]
4libIGCM=1.0
5
6[UserChoices]
7# You can choose here the name of create_etat0 you want to use
8# If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card
9CREATE=ELC-${RESOL_ATM}
10
11# Choose which directory of parameter files you will use
12# PARAM-AR4 representes the "old physics" corresponding to the physic used for IPCC AR4
13PARAM=PARAM-AR4
14# PARAM-new to come : will represent the "new physics" in LMDZ
15
16# Par default, adjust=n in run.def
17LMDZ_adjust = n
18
19[InitialStateFiles]
20List= (${R_OUT}/${config_UserChoices_TagName}/${CREATE}/ATM/Output/Restart/${CREATE}_clim_start.nc,    start.nc) \
21      (${R_OUT}/${config_UserChoices_TagName}/${CREATE}/ATM/Output/Restart/${CREATE}_clim_startphy.nc, startphy.nc)
22
23[BoundaryFiles]
24List= ()
25ListNonDel= (${R_OUT}/${config_UserChoices_TagName}/${CREATE}/ATM/Output/Boundary/${CREATE}_clim_limit.nc, limit.nc)
26
27# With sulfates :
28#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1850.cdf, .),\
29#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1900.cdf, .),\
30#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1920.cdf, .),\
31#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1930.cdf, .),\
32#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1940.cdf, .),\
33#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1950.cdf, .),\
34#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1960.cdf, .),\
35#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1970.cdf, .),\
36#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1980.cdf, .),\
37#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run1990.cdf, .),\
38#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run2000.cdf, .),\
39#         (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/HISTORIQUE/so4.run.nat.cdf, .),\
40#
41# With ISSCP engine :
42#         (${R_BC}/ATM/${config_UserChoices_TagName}/ISCCP/tautab.formatted, .),\
43#         (${R_BC}/ATM/${config_UserChoices_TagName}/ISCCP/invtau.formatted, .),\
44
45[ParametersFiles]
46List=   (${SUBMIT_DIR}/${PARAM}/physiq.def, .), \
47        (${SUBMIT_DIR}/${PARAM}/gcm.def_${RESOL_ATM}, gcm.def), \
48        (${SUBMIT_DIR}/${PARAM}/run.def, .), \
49        (${SUBMIT_DIR}/${PARAM}/traceur.def, .), \
50        (${SUBMIT_DIR}/${PARAM}/Bands_${BandsResol}_${NUM_PROC_ATM}prc.dat, .)
51
52[RestartFiles]
53List=   (restart.nc, restart.nc, start.nc), \
54        (restartphy.nc, restartphy.nc,  startphy.nc)
55
56[OutputText]
57List=   (physiq.def, gcm.def, run.def, traceur.def, Bands_${BandsResol}_${NUM_PROC_ATM}prc.dat)
58
59[OutputFiles]
60List=   (histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,      Post_1M_histmth), \
61        (histISCCP.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histISCCP.nc,    NONE), \
62        (histNMC.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histNMC.nc,      NONE), \
63        (histrac.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histrac.nc,      NONE), \
64        (dynzon.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_dynzon.nc,       NONE), \
65        (histday.nc,      ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,      NONE), \
66        (histhf.nc,       ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,       NONE), \
67        (histhf3d.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf3d.nc,     NONE), \
68        (histins.nc,      ${R_OUT_ATM_O_I}/${PREFIX}_INS_histins.nc,     NONE)
69
70[Post_1M_histmth]
71Patches= (Patch_20070220_histcom_time_axis)
72GatherWithInternal = (lon, lat, presnivs, time_counter)
73TimeSeriesVars= (bils, cldh, cldl, cldm, cldq, cldt, evap, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, sens, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWup200clr, SWdnTOA, SWupTOA, SWdn200, SWdn200clr, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, taux_ter, taux_sic, taux_lic, taux_oce, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, topl0, topl, tops0, tops, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic)
74
75[Post_1M_histISCCP]
76Patches= ()
77GatherWithInternal = (lon, lat, cldtopres, time_counter)
78TimeSeriesVars=(cldISCCP_tau01, cldISCCP_tau11, cldISCCP_tau21, cldISCCP_tau31, cldISCCP_tau41, cldISCCP_tau51, cldISCCP_tau61, ptop, meantaucld)
79
80[Post_1M_histNMC]
81Patches = ()
82GatherWithInternal = (lon, lat, presnivs, time_counter)
83TimeSeriesVars= (t1000, t925, t850, t700, t600, t500, t400, t300, t250, t200, t150, t100, t70, t50, t30, t20, t10, u1000, u925, u850, u700, u600, u500, u400, u300, u250, u200, u150, u100, u70, u50, u30, u20, u10, v1000, v925, v850, v700, v600, v500, v400, v300, v250, v200, v150, v100, v70, v50, v30, v20, v10, phi1000, phi925, phi850, phi700, phi600, phi500, phi400, phi300, phi250, phi200, phi150, phi100, phi70, phi50, phi30, phi20, phi10, rh1000, rh925, rh850, rh700, rh600, rh500, rh400, rh300, rh250, rh200, rh150, rh100, rh70, rh50, rh30, rh20, rh10, q1000, q925, q850, q700, q600, q500, q400, q300, q250, q200, q150, q100, q70, q50, q30, q20, q10)
84
85[Post_1M_dynzon]
86Patches = ()
87GatherWithInternal = (lon, lat, presnivs, time_counter)
88TimeSeriesVars=()
89
90[Post_1D_histday]
91Patches= (Patch_20070220_histcom_time_axis)
92GatherWithInternal = (lon, lat, presnivs, time_counter)
93TimeSeriesVars= (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, iwp, lwp, phi500, precip, pluc, plul, prw, psol, rh2m, q2m, sens, sicf, slp, soll, sols, SWdnSFC, taux, tauy, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
94
95[Post_HF_histhf]
96Patches= (Patch_20070220_histcom_time_axis)
97GatherWithInternal = (lon, lat, presnivs, time_counter)
98TimeSeriesVars=(cldt, psol, q2m, slp, t2m, rain, tsol, u10m, v10m, t1000, t925, t850, t700, t500, t300, t250, t200, t150, t100, t50, t30, t10, u1000, u925, u850, u700, u500, u300, u250, u200, u150, u100, u50, u30, u10, v1000, v925, v850, v700, v500, v300, v250, v200, v150, v100, v50, v30, v10, phi1000, phi925, phi850, phi700, phi500, phi300, phi250, phi200, phi150, phi100, phi50, phi30, phi10, w1000, w925, w850, w700, w500, w300, w250, w200, w150, w100, w50, w30, w10, q1000, q925, q850, q700, q500, q300, q250, q200, q150, q100, q50, q30, q10)
99
100[Post_HF_histhf3d]
101Patches= ()
102GatherWithInternal = (lon, lat, presnivs, time_counter)
103TimeSeriesVars=(temp, ovap, vitu, vitv)
Note: See TracBrowser for help on using the repository browser.