source: CONFIG/UNIFORM/v5/LMDZORINCA_v5/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card @ 1813

Last change on this file since 1813 was 1813, checked in by acosce, 12 years ago

For NMHC_AER config :

  • Add new config with management of resolution
  • remove old config without mangagement of resolution
File size: 3.4 KB
Line 
1#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Physics package to use :
7# AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources with 19 or 39 levels
8# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later with 39 levels
9LMDZ_Physics=AP
10#LMDZ_Physics=NPv3.1
11
12
13LMDZ_NbPeriod_adjust=3
14# LMDZ_NbPeriod_adjust=0
15# To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name
16#LMDZ_Bands_file_name=/ccc/store/cont003/dsm/p86cozic/IGCM_OUT/LMDZORINCA/NMHC_AER/L4OI3NA_39_Bands/ATM/Debug/L4OI3NA_39_Bands_Bands_96x95x39_32prc.dat_1
17
18# Set ConfType to choose parameters for aerosols, solar and green house gazes.
19# The parameter file PARAM/config.def_$ConfType will be used.
20# ConfType=preind/actuel/annuel
21ConfType=Anne
22
23# Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used.
24# OutLevel=low/medium/high
25OutLevel=low
26
27# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n
28LMDZ_COSP_OK=n
29LMDZ_COSP_monthly=n
30LMDZ_COSP_daily=n
31LMDZ_COSP_hf=n
32
33# Set NMC Outputs frequency (monthly, daily, HF) = y/n
34LMDZ_NMC_monthly=n
35LMDZ_NMC_daily=n
36LMDZ_NMC_hf=n
37
38
39# Nugding : ok_guide=y/n
40ok_guide=n
41
42
43[InitialStateFiles]
44# start and startphy are the clim files computed with CLIM_CREATE (create_etat0_limit) job
45List=   (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/start.nc     , start.nc      ) \
46        (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/startphy.nc  , startphy.nc   )
47
48
49[BoundaryFiles]
50List=   (${R_BC}/CHM/LMDZORINCA/${RESOL_ATM}_leap/EL-${RESOL_ATM}_${year}1231_limit.nc , limit.nc)
51
52
53#       (${R_BC}/ATM/LMDZORINCA/${RESOL_ATM}/NUDGE_FILES/u_ecmwf_${year}${month}.nc     , u.nc          ),\
54#       (${R_BC}/ATM/LMDZORINCA/${RESOL_ATM}/NUDGE_FILES/v_ecmwf_${year}${month}.nc     , v.nc          )
55 
56ListNonDel= ()
57
58[ParametersFiles]
59List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}_${LMDZ_Physics} , physiq.def    ), \
60        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D}                    , gcm.def       ), \
61        (${SUBMIT_DIR}/PARAM/run.def                                    , .             ), \
62        (${SUBMIT_DIR}/PARAM/output.def_${OutLevel},                    output.def      ), \
63        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},                    config.def      ), \
64        (${SUBMIT_DIR}/PARAM/guide.def                                  , .             )
65
66[RestartFiles]
67List=   (restart.nc, restart.nc, start.nc), \
68        (restartphy.nc, restartphy.nc,  startphy.nc)
69
70[OutputText]
71List=   (physiq.def, gcm.def, run.def, Bands_${BandsResol}_${NUM_PROC_ATM}prc.dat, config.def, output.def)
72
73
74[OutputFiles]
75List=   (histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )       
76
77[Post_1M_histmth]
78Patches= ()
79GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds, aire)
80TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux_ter, taux_sic, taux_lic, taux_oce, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic)
81ChunckJob2D = NONE
82TimeSeriesVars3D = ()
83ChunckJob3D = NONE
Note: See TracBrowser for help on using the repository browser.