source: CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLESM/CO2AER/piControl_CO2AER_TEST/COMP/inca.card @ 6309

Last change on this file since 6309 was 6309, checked in by tlurton, 5 months ago

Some config commits to support IPSLESM/CO2AER runs with transfer of species from PISCES to INCA (DMS only for the moment).

File size: 7.0 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
7LMDZ_10m_winds=y
8#choose threshold or weibull10 parameter value
9wind_parameter=0.89
10#choose seasalt correctif
11seasalt_corr=1.15
12# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
13feedb=0
14#coupled model with ORCH
15#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
16CoupOrchInca=n
17#active or not chemistry flux in output
18calcul_flux=n
19#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
20flag_plane=1
21#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation)
22#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc )
23emi_interp_time=1
24# In the case of a CO2AER configuration, choose whether to transmit DMS fluxes from PISCES to INCA.
25transm_dms_oa=y
26
27# Specify output frequency for output files
28# File aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage it from this card
29# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
30# if you choose 1d the file will be store in CHM/Output/DA
31# if you choose 1mo the file will be store in CHM/Output/MO
32# if you choose another frequency, the file will be store in CHM/Output/DA by default
33output_frequency_chem=1d
34output_frequency_emi=1d
35output_frequency_species=1d
36output_frequency_forcage=1d
37output_frequency_aero=1d
38output_frequency_dep=1d
39output_frequency_washrate=NONE
40output_frequency_veget=NONE
41output_frequency_reacflux=NONE
42output_frequency_phtrate=NONE
43output_frequency_invariants=NONE
44
45[InitialStateFiles]
46List= ()
47       
48[BoundaryFiles]
49List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_1850_phy.nc,   sflx_ANT.nc         ),\
50     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_1850_phy.nc,   sflx_BBG.nc         ),\
51     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_1850_phy.nc           ,   aircraft_mth.nc     ),\
52     (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}/oxydants_1850.nc            ,   oxydants.nc         )
53
54
55ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc  ,   sflx_GHG.nc     )\
56            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc ,   sflx_MISC.nc    )\
57            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc  ,   sflx_NAT.nc     )\
58            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc                        ,   landuse.nc      )\
59            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC_v2.txt                      ,   rhvEC.txt       )\
60            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC_v2.txt                      ,   wthEC.txt       )\
61            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC_v2.txt                      ,   clyEC.txt       )\
62            (${R_IN}/CHM/INCA${RESOL_CHM}/wth_v2.dat                        ,   wth.dat         )\
63            (${R_IN}/CHM/INCA${RESOL_CHM}/cly_v2.dat                        ,   cly.dat         )\
64            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv_v2.dat                        ,   rhv.dat         )\
65            (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat                ,   phototable.dat  )
66
67
68[ParametersFiles]
69List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
70        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
71        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
72        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, .) ,\
73        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER.xml, file_def_inca.xml ), \
74        (${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat, inca.dat)
75
76[RestartFiles]
77# List restart that have to be saved/restored each loop (file out, saved, and in) :
78List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat)\
79      (chem_restart.nc, chem_restart.nc, chem_start.nc)
80
81[OutputText]
82List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
83
84[OutputFiles]
85List=   (inca1d_emi.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc        ,    Post_1D_inca_emi  ),\
86        (inca1d_species.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc    ,    Post_1D_inca_species  ),\
87        (inca1d_dep.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc       ,    NONE  ),\
88        (inca1d_aero.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc       ,    Post_1D_inca_aero  ),\
89        (inca1d_forcage.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc    ,    NONE  ),\
90        (inca1d_invariants.nc  ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_invariants.nc ,    NONE  ),\
91        (inca1d_reacflux.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc   ,    NONE  ),\
92        (inca1d_chem.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc       ,    NONE  ),\
93        (inca1d_washrate.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc   ,    NONE  ),\
94        (inca1mo_emi.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc        ,    NONE  ),\
95        (inca1mo_species.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc    ,    NONE  ),\
96        (inca1mo_dep.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc       ,    NONE  ),\
97        (inca1mo_aero.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc       ,    NONE  ),\
98        (inca1mo_forcage.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1M_inca_forcage.nc    ,    NONE  ),\
99        (inca1mo_invariants.nc  ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_invariants.nc ,    NONE  ),\
100        (inca1mo_reacflux.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc   ,    NONE  ),\
101        (inca1mo_chem.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,    NONE  ),\
102        (inca1mo_washrate.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc   ,    NONE  ),\
103        (aerosols_from_inca.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,    NONE  )
104
105[Post_1D_inca_aero]
106Patches= ()
107GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
108TimeSeriesVars2D = (loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
109ChunckJob2D = NONE
110TimeSeriesVars3D = ()
111ChunckJob3D = NONE
112Seasonal=OFF
113
114[Post_1D_inca_emi]
115Patches= ()
116GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
117TimeSeriesVars2D = (emino2, emino3, emihno3, emin2o5, emiso2, emih2s, emidms, emidmso, eminh3, emidustci, emino3ci, eminci, emibcai, emioaai, eminai, emisscs, emiso4cs, eminh4cs, emimsacs, emino3cs, emincs, emissas, emibcas, emioaas, emiso4as, eminh4as, emimsaas, emino3as, eminas, emissss, eminss)
118ChunckJob2D = NONE
119TimeSeriesVars3D = ()
120ChunckJob3D = NONE
121Seasonal=OFF
122
123
124[Post_1D_inca_species]
125Patches= ()
126GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
127TimeSeriesVars2D = ()
128ChunckJob2D = NONE
129TimeSeriesVars3D = (mmrso4cs, mmrso4as, mmrdms, mmrssss, mmrbcai, mmrdustci, mmrbcas)
130ChunckJob3D = NONE
131Seasonal=OFF
132
133
Note: See TracBrowser for help on using the repository browser.