source: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/DUSS/COMP/inca.card @ 3244

Last change on this file since 3244 was 3244, checked in by acosce, 5 years ago

update configuration to fit with new inca version rev670 (add the possibility to calculate the ozone stratospheric)

File size: 4.2 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
7LMDZ_10m_winds=y
8# Set Wind_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
9#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
10#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
1110m_winds_method=threshold
12# Set climatological to choose the write_frequency for inca output (inca_avgr, forcage, inca_inst)
13# 86400 = daily output
14freq_write_chem=86400
15# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
16feedb=0
17#choose sedimentation multilayer or one layer
18multilayer_sedim=y
19#coupled model with ORCH
20#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
21CoupOrchInca=n
22#active or not chemistry flux in output
23calcul_flux=n
24#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
25flag_plane=1
26
27# Use XIOS and/or IOIPSL as output library
28XIOS=y
29IOIPSL=n
30
31[InitialStateFiles]
32List= ()
33       
34[BoundaryFiles]
35#List=      (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/165_${year}${month}.nc      , u10mec.nc)\
36#           (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/166_${year}${month}.nc      , v10mec.nc)\
37#           (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u10m_ecmwf_${year}${month}.nc , u10m.nc  )\
38#           (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v10m_ecmwf_${year}${month}.nc , v10m.nc  )
39List=()
40
41ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc                ,   npp.nc              )\
42            (${R_IN}/CHM/INCA${RESOL_CHM}/aircraft.nc           ,   aircraft_mth.nc     )\
43            (${R_IN}/CHM/INCA${RESOL_CHM}/sflx.nc               ,   sflx.nc             )\
44            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc            ,   landuse.nc          )\
45            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt             ,   rhvEC.txt           )\
46            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt             ,   wthEC.txt           )\
47            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt             ,   clyEC.txt           )\
48            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat               ,   wth.dat             )\
49            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat               ,   cly.dat             )\
50            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat               ,   rhv.dat             )\
51            (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat    ,   phototable.dat      )
52
53
54
55[ParametersFiles]
56List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
57        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
58        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
59        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_DUSS.xml, file_def_inca.xml), \
60        (${MODIPSL}/bin/inca.dat, .)
61
62[RestartFiles]
63# List restart that have to be saved/restored each loop (file out, saved, and in) :
64List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat)
65
66
67[OutputText]
68List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml)
69
70[OutputFiles]
71List=   (inca_aero.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc,  Post_1D_inca_aero  ),\
72        (inca_reacflux.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc,    NONE  ),\
73        (inca_forcage.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc, Post_1D_inca_forcage  ),\
74        (inca_veget.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc,  Post_1D_inca_veget  )
75
76
77[Post_1D_inca_aero]
78Patches= ()
79GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
80TimeSeriesVars2D = (od550ssss, od550ssas,od550sscs,od550dustci, loaddustci, loadsscs, loadssas,loadssss, emidustci, emissas, emissss, emisscs)
81ChunckJob2D = NONE
82TimeSeriesVars3D = ()
83ChunckJob3D = NONE
84Seasonal=OFF
85
86
87[Post_1D_inca_forcage]
88Patches= ()
89GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
90TimeSeriesVars2D = (SWTOAAS_AER,SWTOAAS_DUST,SWTOAAS_SS)
91ChunckJob2D = NONE
92TimeSeriesVars3D = ()
93ChunckJob3D = NONE
94Seasonal=OFF
95
96
97[Post_1D_inca_veget]
98Patches= ()
99GatherWithInternal = (lon, lat, veget, time_counter)
100TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
101ChunckJob2D = NONE
102TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
103ChunckJob3D = NONE
104Seasonal=OFF
Note: See TracBrowser for help on using the repository browser.