source: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/GES/COMP/lmdz.card @ 2770

Last change on this file since 2770 was 2770, checked in by jgipsl, 6 years ago

Update to be coherent with LMDZOR_v6 :

  • added vert.def and removed vertical dependencies from gcm.def and physiq.def
  • added new physiq.def_NPv5.4. Note this is still under develeoppement.
  • clean old parameters in orchidee not longer used/existing
  • use file_def_orchidee.xml from ORCHIDEE source model directory
File size: 6.2 KB
Line 
1#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Physics package to use :
7# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
8# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later
9# LMDZ_Physics=NPv5.4 for new physics to be used with LMDZ5/trunk revision 2449 or later
10LMDZ_Physics=AP
11
12# Use XIOS as output library
13XIOS=y
14
15# Set the variable CREATE needed further below to find the initial and boundary condition files.
16CREATE=ELC-${RESOL_ATM_3D}
17
18# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
19ByPass_hgardfou_teta=n
20
21# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
22ByPass_hgardfou_mats=n
23
24# Number of periods where to set parameter adjust=y before switching to adjust=n
25# For adjust=n, set LMDZ_NbPeriod_ajust=0.
26LMDZ_NbPeriod_adjust=0
27# LMDZ_NbPeriod_adjust=0
28# To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name
29#LMDZ_Bands_file_name=/ccc/store/cont003/dsm/p86cozic/IGCM_OUT/LMDZORINCA/NMHC_AER/L4OI3NA_39_Bands/ATM/Debug/L4OI3NA_39_Bands_Bands_96x95x39_32prc.dat_1
30
31# Set ConfType to choose parameters for aerosols, solar and green house gazes.
32# The parameter file PARAM/config.def_$ConfType will be used.
33# ConfType=preind/actuel/annuel
34ConfType=actuel
35
36# manage radiative aerosol effect and ozone
37flag_aerosol=6
38ok_ade=y
39ok_aie=n
40aerosol_couple=y
41read_climoz=0
42ok_cdnc=y
43
44# Set OutLevel to choose the level of output for LMDZ.
45# OutLevel=low/medium/high
46OutLevel=low
47
48# COSP activation and choose of output frequency for COSP (monthly, daily, HF) = y/n
49LMDZ_COSP_OK=n
50LMDZ_COSP_monthly=n
51LMDZ_COSP_daily=n
52LMDZ_COSP_hf=n
53
54# Set NMC Outputs frequency (monthly, daily, HF) = y/n
55LMDZ_NMC_monthly=n
56LMDZ_NMC_daily=n
57LMDZ_NMC_hf=n
58
59
60# Nugding : ok_guide=y/n
61# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
62ok_guide=n
63
64
65[InitialStateFiles]
66# start and startphy are the clim files computed with CLIM_CREATE (create_etat0_limit) job
67List=   (${R_IN}/CHM/INCA${RESOL_CHM}/start_nitrate.nc  , start.nc      ) \
68        (${R_IN}/CHM/INCA${RESOL_CHM}/startphy_nitrate.nc       , startphy.nc   )
69
70
71[BoundaryFiles]
72List=   (${R_IN}/ATM/${RESOL_ATM}/LIMIT/ERAI/leap/limit_${year}.nc , limit.nc)
73
74#       (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u_ecmwf_${year}${month}.nc         , u.nc          ),\
75#       (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v_ecmwf_${year}${month}.nc         , v.nc          )
76 
77ListNonDel= ()
78
79[ParametersFiles]
80List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
81        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY},    gcm.def),          \
82        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
83        (${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),          \
84        (${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),          \
85        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
86        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
87        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
88        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
89        (${SUBMIT_DIR}/PARAM/file_def_histmth_lmdz.xml, . ),                \
90        (${SUBMIT_DIR}/PARAM/file_def_histmthCOSP_lmdz.xml, .),             \
91        (${SUBMIT_DIR}/PARAM/file_def_histmthNMC_lmdz.xml, . ),             \
92        (${SUBMIT_DIR}/PARAM/file_def_histday_lmdz.xml, . ),                \
93        (${SUBMIT_DIR}/PARAM/file_def_histdayCOSP_lmdz.xml, .),             \
94        (${SUBMIT_DIR}/PARAM/file_def_histdayNMC_lmdz.xml, . ),             \
95        (${SUBMIT_DIR}/PARAM/file_def_histhf_lmdz.xml, . ),                 \
96        (${SUBMIT_DIR}/PARAM/file_def_histhfCOSP_lmdz.xml, .),              \
97        (${SUBMIT_DIR}/PARAM/file_def_histhfNMC_lmdz.xml, . ),              \
98        (${SUBMIT_DIR}/PARAM/file_def_histstn_lmdz.xml, . ),                \
99        (${SUBMIT_DIR}/PARAM/file_def_histins_lmdz.xml, . ),                \
100        (${SUBMIT_DIR}/PARAM/file_def_histLES_lmdz.xml, . ),                \
101        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
102        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . )
103
104[RestartFiles]
105List=   (restart.nc, restart.nc, start.nc), \
106        (restartphy.nc, restartphy.nc,  startphy.nc)
107
108[OutputText]
109List=   (physiq.def, gcm.def, vert.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt)
110
111[OutputFiles]
112List=   (histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )       
113
114[Post_1M_histmth]
115Patches= ()
116GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bounds, aire)
117TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
118ChunckJob2D = 100Y
119TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
120ChunckJob3D = 100Y
121Seasonal=ON
Note: See TracBrowser for help on using the repository browser.