source: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC/COMP/inca.card @ 2975

Last change on this file since 2975 was 2975, checked in by acosce, 6 years ago

update output file list for nmhc configuration of lmdzorinca

File size: 4.1 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
7LMDZ_10m_winds=y
8# Set 10m_Winds_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
9#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
10#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
1110m_winds_method=threshold
12# Set climatological to choose the write_frequency for inca output (inca_avgr, forcage, inca_inst)
13# 86400 = daily output
14freq_write_chem=86400
15# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
16feedb=0
17#choose sedimentation multilayer or one layer
18multilayer_sedim=y
19#coupled model with ORCH
20CoupOrchInca=n
21
22
23# Use XIOS and/or IOIPSL as output library
24XIOS=y
25IOIPSL=n
26
27[InitialStateFiles]
28List= ()
29       
30[BoundaryFiles]
31List=()
32
33ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc                ,   npp.nc              )\
34            (${R_IN}/CHM/INCA${RESOL_CHM}/o3clim.nc             ,   o3clim.nc           )\
35            (${R_IN}/CHM/INCA${RESOL_CHM}/so4.nc                ,   so4.nc              )\
36            (${R_IN}/CHM/INCA${RESOL_CHM}/aircraft.nc           ,   aircraft.nc         )\
37            (${R_IN}/CHM/INCA${RESOL_CHM}/sflx_nitrate.nc       ,   sflx.nc             )\
38            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc            ,   landuse.nc          )\
39            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt             ,   rhvEC.txt           )\
40            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt             ,   wthEC.txt           )\
41            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt             ,   clyEC.txt           )\
42            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat               ,   wth.dat             )\
43            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat               ,   cly.dat             )\
44            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat               ,   rhv.dat             )\
45            (${R_IN}/CHM/INCA${RESOL_CHM}/phototable_glo.dat    ,   phototable.dat      )
46
47
48[ParametersFiles]
49List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
50        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
51        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
52        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC.xml, file_def_inca.xml), \
53        (${MODIPSL}/bin/inca.dat, .)
54
55[RestartFiles]
56# List restart that have to be saved/restored each loop (file out, saved, and in) :
57List= (NONE)
58
59
60[OutputText]
61List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml)
62
63[OutputFiles]
64List=   (inca_emi.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc,    NONE  ),\
65        (inca_species.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc, Post_1D_inca_species  ),\
66        (inca_dvel.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dvel.nc,    NONE  ),\
67        (inca_chem.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc,  Post_1D_inca_chem  ),\
68        (inca_common.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_common.nc,    NONE  ),\
69        (inca_washrate.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc,    NONE  )
70
71
72
73[Post_1D_inca_species]
74Patches= ()
75GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
76TimeSeriesVars2D = ()
77ChunckJob2D = NONE
78TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,,mmrso4cs, mmrso4as, mmrdms, mmrssss, vmrno3, vmrhno3, mmrbcai, mmrdustci)
79ChunckJob3D = NONE
80
81
82[Post_1D_inca_chem]
83Patches= ()
84GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
85TimeSeriesVars2D = (o3_col, co_col, no2_col, ch2o_col, ch4_col, hno2_col, oh_col, so2_col)
86ChunckJob2D = NONE
87TimeSeriesVars3D = ()
88ChunckJob3D = NONE
89
90[Post_1D_inca_forcage]
91Patches= ()
92GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
93TimeSeriesVars2D = (SWTOAAS_ANT, SWTOAAS_AER, SWTOAAS_NAT, SWTOAAS_BC, SWTOAAS_SO4, SWTOAAS_POM, SWTOAAS_DUST, SWTOAAS_SS, SWTOAAS_DNO3, SWTOASS_SNO3,  SWTOAAS_FNO3)
94ChunckJob2D = NONE
95TimeSeriesVars3D = ()
96ChunckJob3D = NONE
97
98[Post_1D_inca_veget]
99Patches= ()
100GatherWithInternal = (lon, lat, veget, time_counter)
101TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
102ChunckJob2D = NONE
103TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
104ChunckJob3D = NONE
Note: See TracBrowser for help on using the repository browser.