source: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card @ 2735

Last change on this file since 2735 was 2735, checked in by acosce, 9 years ago

Add all parameter to allow interface between orchidee and inca

File size: 5.1 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
7LMDZ_10m_winds=y
8# Set 10m_Winds_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
9#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
10#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
1110m_winds_method=threshold
12# Set climatological to choose the write_frequency for inca output (inca_avgr, forcage, inca_inst)
13# 86400 = daily output
14freq_write_chem=86400
15# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
16feedb=0
17#choose sedimentation multilayer or one layer
18multilayer_sedim=y
19CoupOrchInca=n
20
21
22# Use XIOS and/or IOIPSL as output library
23XIOS=y
24IOIPSL=n
25
26[InitialStateFiles]
27List= ()
28       
29[BoundaryFiles]
30#List=      (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/165_${year}${month}.nc      , u10mec.nc)\
31#           (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/166_${year}${month}.nc      , v10mec.nc)\
32#           (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u10m_ecmwf_${year}${month}.nc , u10m.nc  )\
33#           (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v10m_ecmwf_${year}${month}.nc , v10m.nc  )
34List=()
35
36ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc                ,   npp.nc              )\
37            (${R_IN}/CHM/INCA${RESOL_CHM}/o3clim.nc     ,   o3clim.nc           )\
38            (${R_IN}/CHM/INCA${RESOL_CHM}/so4.nc                ,   so4.nc              )\
39            (${R_IN}/CHM/INCA${RESOL_CHM}/aircraft.nc   ,   aircraft.nc         )\
40            (${R_IN}/CHM/INCA${RESOL_CHM}/sflx_nitrate.nc       ,   sflx.nc             )\
41            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc    ,   landuse.nc          )\
42            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt     ,   rhvEC.txt           )\
43            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt     ,   wthEC.txt           )\
44            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt     ,   clyEC.txt           )\
45            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat               ,   wth.dat             )\
46            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat               ,   cly.dat             )\
47            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat               ,   rhv.dat             )\
48            (${R_IN}/CHM/INCA${RESOL_CHM}/phototable_glo.dat   ,   phototable.dat       )
49
50
51[ParametersFiles]
52List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
53        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
54        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
55        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER.xml, file_def_inca.xml), \
56        (${MODIPSL}/bin/inca.dat, .)
57
58[RestartFiles]
59# List restart that have to be saved/restored each loop (file out, saved, and in) :
60List= (precipinsoil.dat, precipinsoil.dat, precipinsoil.dat)
61
62
63[OutputText]
64List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml)
65
66[OutputFiles]
67List=   (inca_emi.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc,    NONE  ),\
68        (inca_species.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc, Post_1D_inca_species  ),\
69        (inca_dvel.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dvel.nc,    NONE  ),\
70        (inca_chem.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc,  Post_1D_inca_chem  ),\
71        (inca_aero.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc, Post_1D_inca_aero  ),\
72        (inca_common.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_common.nc,    NONE  ),\
73        (inca_washrate.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc,    NONE  ),\
74        (inca_forcage.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc, Post_1D_inca_forcage  ),\
75        (inca_veget.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc,  Post_1D_inca_veget  )
76
77
78
79[Post_1D_inca_aero]
80Patches= ()
81GatherWithInternal = (lon, lat, presnivs, time_counter_bounds, time_counter, area)
82TimeSeriesVars2D = (od550bcas,od550pomas,od550so4as, od550so4cs, OD550_SSSSM, od550ssas,od550ss,od550dust,od550bc,od550oa, loaddustCI, loadno3CI, loadbcAI, loadpomAI, loadssCS, loadso4CS, loadno3CS, loadSSAS, loadbcAS, loadpomAS, loadso4AS, LOAD_ASNH4M, LOAD_ASNO3M, LOAD_SSSSM)
83ChunckJob2D = NONE
84TimeSeriesVars3D = ()
85ChunckJob3D = NONE
86
87[Post_1D_inca_species]
88Patches= ()
89GatherWithInternal = (lon, lat, presnivs, time_counter_bounds,time_counter, area)
90TimeSeriesVars2D = ()
91ChunckJob2D = NONE
92TimeSeriesVars3D = (NO,NO2,O3,HNO3,CH4,CO)
93ChunckJob3D = NONE
94
95
96[Post_1D_inca_chem]
97Patches= ()
98GatherWithInternal = (lon, lat, presnivs,time_counter_bounds, time_counter, area)
99TimeSeriesVars2D = (o3_col, co_col, no2_col, ch2o_col, ch4_col, hno2_col, oh_col, so2_col)
100ChunckJob2D = NONE
101TimeSeriesVars3D = ()
102ChunckJob3D = NONE
103
104[Post_1D_inca_forcage]
105Patches= ()
106GatherWithInternal = (lon, lat, presnivs, time_counter_bounds,time_counter, area)
107TimeSeriesVars2D = (SWTOAAS_ANT, SWTOAAS_AER, SWTOAAS_NAT, SWTOAAS_BC, SWTOAAS_SO4, SWTOAAS_POM, SWTOAAS_DUST, SWTOAAS_SS, SWTOAAS_DNO3, SWTOASS_SNO3,  SWTOAAS_FNO3)
108ChunckJob2D = NONE
109TimeSeriesVars3D = ()
110ChunckJob3D = NONE
111
112[Post_1D_inca_veget]
113Patches= ()
114GatherWithInternal = (lon, lat, veget, time_counter)
115TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
116ChunckJob2D = NONE
117TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
118ChunckJob3D = NONE
Note: See TracBrowser for help on using the repository browser.