source: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card @ 2382

Last change on this file since 2382 was 2382, checked in by jgipsl, 10 years ago

Homogenisation with modifications done previously in IPSLCM6 and LMDZOR.

File size: 5.2 KB
Line 
1#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Physics package to use :
7# AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
8# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later
9LMDZ_Physics=AP
10#LMDZ_Physics=NPv3.1
11
12# Use XIOS as output library
13XIOS=y
14
15# Set the variable CREATE needed further below to find the initial and boundary condition files.
16CREATE=ELC-${RESOL_ATM_3D}
17
18# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
19ByPass_hgardfou_teta=n
20
21# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
22ByPass_hgardfou_mats=n
23
24# Number of periods where to set parameter adjust=y before switching to adjust=n
25# For adjust=n, set LMDZ_NbPeriod_ajust=0.
26LMDZ_NbPeriod_adjust=3
27# LMDZ_NbPeriod_adjust=0
28# To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name
29#LMDZ_Bands_file_name=/ccc/store/cont003/dsm/p86cozic/IGCM_OUT/LMDZORINCA/NMHC_AER/L4OI3NA_39_Bands/ATM/Debug/L4OI3NA_39_Bands_Bands_96x95x39_32prc.dat_1
30
31# Set ConfType to choose parameters for aerosols, solar and green house gazes.
32# The parameter file PARAM/config.def_$ConfType will be used.
33# ConfType=preind/actuel/annuel
34ConfType=Anne
35
36# manage radiative aerosol effect and ozone
37flag_aerosol=6
38ok_ade=y
39ok_aie=n
40aerosol_couple=y
41read_climoz=0
42ok_cdnc=y
43
44# Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used.
45# OutLevel=low/medium/high
46OutLevel=low
47
48# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n
49LMDZ_COSP_OK=n
50LMDZ_COSP_monthly=n
51LMDZ_COSP_daily=n
52LMDZ_COSP_hf=n
53
54# Set NMC Outputs frequency (monthly, daily, HF) = y/n
55LMDZ_NMC_monthly=n
56LMDZ_NMC_daily=n
57LMDZ_NMC_hf=n
58
59
60# Nugding : ok_guide=y/n
61# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
62ok_guide=n
63
64
65[InitialStateFiles]
66# start and startphy are the clim files computed with CLIM_CREATE (create_etat0_limit) job
67List=   (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/start.nc     , start.nc      ) \
68        (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/startphy.nc  , startphy.nc   )
69
70
71[BoundaryFiles]
72List=   (${R_BC}/CHM/LMDZORINCA/${RESOL_ATM}_leap/EL-${RESOL_ATM}_${year}1231_limit.nc , limit.nc)
73
74#       (/ccc/work/cont003/subipsl/subipsl/ECMWF${RESOL_ATM_XY}/AN${year}/u_ecmwf_${year}${month}.nc    , u.nc          ),\
75#       (/ccc/work/cont003/subipsl/subipsl/ECMWF${RESOL_ATM_XY}/AN${year}/v_ecmwf_${year}${month}.nc    , v.nc          )
76 
77ListNonDel= ()
78
79[ParametersFiles]
80List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}_${LMDZ_Physics}, physiq.def), \
81        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),    \
82        (${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),    \
83        (${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),    \
84        (${SUBMIT_DIR}/PARAM/output.def_${OutLevel},  output.def),    \
85        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),    \
86        (${SUBMIT_DIR}/PARAM/guide.def, .), \
87        (${SUBMIT_DIR}/PARAM/run.def, .), \
88        (${SUBMIT_DIR}/PARAM/traceur.def, .), \
89        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),\
90        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . )            ,\
91        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . )          ,\
92        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . )   ,\
93        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . )    ,\
94        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . )   ,\
95        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )   ,\
96        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . )   ,\
97        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . )   ,\
98        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
99        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
100        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ),\
101        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, . ),\
102        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, . ),\
103        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, . )
104
105[RestartFiles]
106List=   (restart.nc, restart.nc, start.nc), \
107        (restartphy.nc, restartphy.nc,  startphy.nc)
108
109[OutputText]
110List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml,field_def_lmdz.xml)
111
112[OutputFiles]
113List=   (histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )       
114
115[Post_1M_histmth]
116Patches= ()
117GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds, aire)
118TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux_ter, taux_sic, taux_lic, taux_oce, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic)
119ChunckJob2D = NONE
120TimeSeriesVars3D = ()
121ChunckJob3D = NONE
Note: See TracBrowser for help on using the repository browser.