source: CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/orchidee.def_CWRR @ 3418

Last change on this file since 3418 was 3418, checked in by jgipsl, 4 years ago

Update ORCHIDEE component for version 6.0.13:

  • change input file for PFTmap: now use map with 15pfts
  • add input file woodharvest
  • add optimized parameters for carbon.

Note: NVM=15 in orchidee.def goes together with the new PFTmap.nc containing 15 PFTs.

File size: 5.2 KB
Line 
1#
2#**************************************************************************
3#                    Parameter file list for ORCHIDEE
4#**************************************************************************
5
6# Input and output
7#**************************************************************************
8# Restart the time from the GCM.
9# default = n
10SECHIBA_reset_time = y
11
12# Name of restart to read for initial conditions
13# default = NONE
14SECHIBA_restart_in = _AUTOBLOCKER_
15
16# Name of restart to read for initial conditions of STOMATE
17# default = NONE
18STOMATE_RESTART_FILEIN = _AUTOBLOCKER_
19
20# Use XIOS for writing diagnostics file
21# defulat = n
22XIOS_ORCHIDEE_OK = y
23
24# Writefrequency in seconds in sechiba_history.nc
25# default = 86400.0
26WRITE_STEP = 0
27
28# Hydrology parameters
29#**************************************************************************
30# Activate the multi-layer diffusion scheme adapted from CWRR
31# by default the Choisnel hydrology is used.
32# default = n
33HYDROL_CWRR = y
34
35# Activate river routing
36# default = n
37RIVER_ROUTING = y
38
39# SOILTYPE_CLASSIF :  Type of classification used for the map of soil types (default zobler)
40SOILTYPE_CLASSIF = zobler
41SOILALB_FILE     = soils_param.nc
42SOILCLASS_FILE   = soils_param.nc
43
44# DO_RSOIL : Reduce soil evaporation with a soil resistance
45DO_RSOIL = y
46
47#**************************************************************************
48# Activate Stomate component
49STOMATE_OK_STOMATE = _AUTOBLOCKER_
50
51# Activate calculations of CO2 according to Farqhuar and Ball
52# default = n
53STOMATE_OK_CO2 = y
54
55# Use cdrag coefficient from gcm
56CDRAG_FROM_GCM = y
57
58# Interception reservoir coefficient.
59# default = 0.1
60SECHIBA_QSINT = 0.02
61
62# Use 15 PFTs. Note that PFTmap.nc must contains 15PFTs.
63# PFT=10, 14 and 15 share the same parametrization except for VCMAX and LAI_MAX specified below. 
64NVM=15
65PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13,10,10
66
67# STRESS_GS, STRESS_GM, STRESS_VCMAX : Stress on GS, GM and VCMAX (15 values, without space to have short line readable)
68STRESS_GS=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
69STRESS_GM=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
70STRESS_VCMAX=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
71
72# Optimized parameters for albedo  (15 values, without space to have short line readable for IOIPSL)
73ALB_LEAF_NIR = 0.,0.23,0.18,0.18,0.20,0.24,0.15,0.26,0.20,0.24,0.27,0.28,0.26,0.24,0.24
74ALB_LEAF_VIS = 0.,0.04,0.04,0.04,0.04,0.03,0.03,0.03,0.03,0.06,0.06,0.06,0.06,0.06,0.06
75SNOWA_AGED_NIR = 0.50,0,0,0.10,0.37,0.08,0.16,0.17,0.27,0.44,0.44,0.44,0.44,0.44,0.44
76SNOWA_DEC_NIR = 0.13,0,0,0.10,0.10,0.16,0.04,0.07,0.08,0.12,0.12,0.12,0.12,0.12,0.12
77SNOWA_AGED_VIS = 0.74,0,0,0.08,0.24,0.07,0.18,0.18,0.33,0.57,0.57,0.57,0.57,0.57,0.57
78SNOWA_DEC_VIS = 0.21,0,0,0.14,0.08,0.17,0.05,0.06,0.09,0.15,0.15,0.15,0.15,0.15,0.15
79
80# Optimized parameters for photosynthetic capacity
81VCMAX25__02 = 45.0
82VCMAX25__03 = 50.0
83VCMAX25__04 = 35.0
84VCMAX25__05 = 40.0
85VCMAX25__06 = 50.0
86VCMAX25__07 = 45.0
87VCMAX25__08 = 35.0
88VCMAX25__09 = 35.0
89VCMAX25__10 = 50.0
90VCMAX25__11 = 50.0
91VCMAX25__12 = 70.0
92VCMAX25__13 = 70.0
93VCMAX25__14 = 50.0
94VCMAX25__15 = 40.0
95
96# Optimized parameters for LAI
97LAI_MAX__02 = 7.0
98LAI_MAX__03 = 7.0
99LAI_MAX__04 = 5.0
100LAI_MAX__05 = 4.0
101LAI_MAX__06 = 5.0
102LAI_MAX__07 = 3.5
103LAI_MAX__08 = 4.0
104LAI_MAX__09 = 3.0
105LAI_MAX__10 = 2.5
106LAI_MAX__11 = 2.0
107LAI_MAX__12 = 5.0
108LAI_MAX__13 = 5.0
109LAI_MAX__14 = 2.5
110LAI_MAX__15 = 2.0
111
112# Activate downregulation for CO2
113DOWNREGULATION_CO2=y
114DOWNREGULATION_CO2_BASELEVEL=380.
115
116# Activate harvest of wood
117DO_WOOD_HARVEST=y
118
119# Parameters related to vegetation map
120#**************************************************************************
121# Year of the land_use vegetation map readed
122# year off the pft map
123# default = 282
124VEGET_YEAR = 1
125
126# The parameter is used to bypass veget_year count
127# and reinitialize it with VEGET_YEAR parameter.
128# Then it is possible to change LAND USE file.
129# If LAND_USE
130# default = y
131VEGET_REINIT = n
132
133# Update vegetation frequency (since 2.0 version)
134# The veget datas will be update at this period if LAND_USE
135# default = 1Y
136VEGET_UPDATE = _AUTO_
137
138# Do not use default fire module
139FIRE_DISABLE = y
140
141# Create river description file
142RIVER_DESC = _AUTO_
143RIVER_DESC_FILE =  river_desc.nc
144
145# Parameters related to surface and thermal physical properties
146#************************************************************************
147# Read bare soil albedo from file with background MODIS data
148ALB_BG_MODIS = y
149ALB_BG_FILE  = alb_bg.nc
150
151# ROUGH_DYN : Account for a dynamic roughness height (activation of Su et al. parametrization)
152ROUGH_DYN=y
153
154# OK_FREEZE :  Activate the complet soil freezing scheme
155OK_FREEZE=y
156
157# DEPTH_MAX_T (m) :  Maximum depth of the soil thermodynamics
158DEPTH_MAX_T=90
159
160# OK_EXPLICITSNOW :  Activate explict snow scheme
161OK_EXPLICITSNOW=y
162 
163# READ_REFTEMP :  Initialize soil temperature using climatological temperature
164READ_REFTEMP=y
165
166# Parameters related to chemistry bvoc
167#************************************************************************
168# CHEMISTRY_OK_BVOC :  Activate chemistry
169CHEMISTRY_BVOC =  n
170
171# CO2 FOR BVOC - WILKINSON :  CO2 inhibition effect for isoprene based on Wilkinson approach?
172CO2_FOR_BVOC_WILKINSON=n
173
174# CO2 FOR BVOC - POSSELL :  CO2 inhibition effect for isoprene based on Possell approach?
175CO2_FOR_BVOC_POSSELL=n
176
Note: See TracBrowser for help on using the repository browser.