source: CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/IPSLCM-reg/pdControl_TUNING/COMP/orchidee.card @ 6855

Last change on this file since 6855 was 6855, checked in by jgipsl, 4 months ago

Corrected so that all experiments output out_orchidee*
This is done because most of the time, ORCHIDEE only creates 1 output file named out_orchidee_0000.0000 but it can also output one file per core if PRINTLEV>1 (default = 1). Keeping out_orchidee will not work if there is only one file out_orchidee_0000.0000.

File size: 4.2 KB
Line 
1[Compatibility]
2libIGCM=1.0
3
4[UserChoices]
5AtmCo2=2.8432e+02
6
7# VEGET_UPDATE_at_start=y : orchidee.driver will set VEGET_UPDATE=1Y at the first cumul period when starting a new simulation.
8#                           After the first period, VEGET_UPDATE will be set according to the choice done below. 
9VEGET_UPDATE_at_start=y
10
11# VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file
12# VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year
13VEGET_UPDATE=0Y
14
15# Specify output level for output files
16# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
17# output_level_filename=0     : lowest level writing only variables needed for the monitoring
18# output_level_filename=12    : highest level which will output all variables
19# output_level_filename=NONE  : deactivate the file
20output_level_sechiba_history = 2
21output_level_sechiba_out_2 = NONE
22output_level_sechiba_history_4dim = NONE
23
24# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
25# Settings using WriteFrequency in config.card is not longer used
26output_freq_sechiba_history = 1mo
27output_freq_sechiba_out_2 = 1d
28output_freq_sechiba_history_4dim = 1d
29
30[InitialStateFiles]
31List=   (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soils_param.nc ), \
32        (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soilcolor.nc ), \
33        (${R_IN}/SRF/reftemp.nc, . ), \
34        (${R_IN}/SRF/routing.nc, . ), \
35        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
36        (${R_IN}/SRF/cartepente2d_15min.nc, .)
37
38[BoundaryFiles]
39List= ()
40ListNonDel= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_1850.nc, PFTmap.nc),\
41            (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_1850.nc,           woodharvest.nc),\
42            (${R_IN}/SRF/soils_param.nc, . )
43
44
45[SmoothFiles]
46List= ()
47
48[ParametersFiles]
49List=   (${SUBMIT_DIR}/PARAM/ORCHIDEE/orchidee.def_v22, orchidee.def)   ,\
50        (${SUBMIT_DIR}/PARAM/ORCHIDEE/ping_orchidee.xml, . )                       ,\
51        (${SUBMIT_DIR}/PARAM/ORCHIDEE/dr2xml_IPSL_orchidee.xml, dr2xml_orchidee.xml)                    ,\
52        (${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/file_def_orchidee.xml, .)  ,\
53        (${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/context_input_orchidee.xml, .) ,\
54        (${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/context_orchidee.xml, .)   ,\
55        (${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/field_def_orchidee.xml, .)
56
57[RestartFiles]
58List=   (sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
59
60[OutputText]
61List=   (out_orchidee*, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc)
62
63[OutputFiles]
64List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
65        (sechiba_stomate_history.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_stomate_history.nc, NONE), \
66        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
67        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE), \
68        (ORCHIDEE_interp_diag.nc, ${R_OUT_SRF_O_D}/${PREFIX}_ORCHIDEE_interp_diag.nc, NONE), \
69        (forcing_by_ORCHIDEE.nc, ${R_OUT_SRF_O_H}/${PREFIX}_forcing_by_ORCHIDEE.nc, NONE)
70
71
72[Post_1M_sechiba_history]
73Patches = ()
74GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
75TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, gppCrop, rhCrop)
76ChunckJob2D = NONE
77TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol)
78ChunckJob3D = NONE
79Seasonal = ON
80
81[Post_HF_sechiba_out_2]
82Patches = ()
83GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
84TimeSeriesVars2D = ()
85ChunckJob2D = NONE
86TimeSeriesVars3D = (snowdz, snowtemp, snowrho)
87ChunckJob3D = NONE
88Seasonal = OFF
89
Note: See TracBrowser for help on using the repository browser.