source: TOOLS/MOSAIX/CreateOasisGrids.bash @ 4186

Last change on this file since 4186 was 4186, checked in by omamce, 3 years ago

O.M. :

Runoff weight for both ICO and LMDZ
Correct corc grid

  • Property svn:executable set to *
  • Property svn:keywords set to Date Revision HeadURL Author Id
File size: 21.2 KB
Line 
1#!/bin/bash
2### ===========================================================================
3###
4### Creates grids.nc, masks.nc and areas.nc for OASIS-MCT
5###
6### ===========================================================================
7##
8##  Warning, to install, configure, run, use any of Olivier Marti's
9##  software or to read the associated documentation you'll need at least
10##  one (1) brain in a reasonably working order. Lack of this implement
11##  will void any warranties (either express or implied).
12##  O. Marti assumes no responsability for errors, omissions,
13##  data loss, or any other consequences caused directly or indirectly by
14##  the usage of his software by incorrectly or partially configured
15##  personal.
16##
17###
18### Documentation : https://forge.ipsl.jussieu.fr/igcmg/wiki/IPSLCM6/MOSAIX
19###
20## SVN information
21#  $Author$
22#  $Date$
23#  $Revision$
24#  $Id$
25#  $HeadURL$
26
27set +vx
28
29echo ${Titre}"Starting CreateOasisGrids.bash"${Norm}
30
31##
32echo ${Titre}"Default configuration (may be overrided by command line parameters)"${Norm}
33## ===========================================================================
34OCE=ORCA2.3
35# OCE=eORCA1.2
36ATM=ICO30
37#ATM=ICO40
38#ATM=ICO450
39#ATM=LMD144142
40#ATM=LMD9695
41
42## ===========================================================================
43##
44## You should not change anything below this line ....
45##
46## ===========================================================================
47
48echo ${Titre}"Defines computer"${Norm}
49# ================
50if [[ $(hostname) = curie* ]]    ; then arch=curie ; center=tgcc ; fi
51if [[ $(hostname) = irene* ]]    ; then arch=irene ; center=tgcc ; fi
52if [[ $(hostname) = lsce3005* ]] ; then arch=spip  ; center=spip ; fi
53
54PROGRAM=$(basename ${0})
55
56# case ${arch} in
57#     ( curie | irene )
58#     set +vx
59#     module unload cdo nco ferret
60#     module unload netcdf hdf5
61#     module load python # /2.7.12
62#     module load netcdf/4.3.3.1_hdf5_parallel # Version for XIOS
63#     module load nco
64#     R_IN=$(ccc_home -u igcmg --cccwork)/IGCM
65#     TMPDIR=${SCRATCHDIR}/TMP
66#     SUBMIT_DIR=${BRIDGE_MSUB_PWD:-${SUBMIT_DIR}}
67#     ;;
68#     ( spip )
69#     R_IN=${HOME}/Scratch/IGCM
70#     TMPDIR=${HOME}/Scratch/TMP
71#     SUBMIT_DIR=$(pwd)
72#     MPIRUN=/opt/local/bin/mpirun-openmpi-gcc49 -n 2
73#     ;;
74#     ( * ) exit -1 ;;
75# esac
76
77##
78echo ${Titre}"Command line parameters"${Norm}
79## ===========================================================================
80set -e
81set -o verbose
82set -o xtrace
83
84while [[ ${1} = -* ]] ; do
85    case ${1} in
86        ( -- ) shift ; break ;;
87        ( -o=* | --oce=*    ) OCE=${1##*=}     ; echo OCE:${OCE}    ;;
88        ( -o   | --oce      ) shift ; OCE=${1} ; echo OCE:${OCE}    ;;
89        ( -a=* | --atm=*    ) ATM=${1##*=}     ; echo ATM:${ATM}    ;;
90        ( -a   | --atm      ) shift ; ATM=${1} ; echo ATM:${ATM}    ;;
91        ( -v | --verbose    ) set -o verbose   ;;
92        ( -x | --xtrace     ) set -o xtrace    ;;
93        ( -e                ) set -e           ;;
94        ( -V | --noverbose  ) set +o verbose   ;;
95        ( -X | --noxtrace   ) set +o xtrace    ;;
96        ( -E                ) set +e           ;;
97        ( -* ) echo ${Bold}"Unknown option : ${1}"${Norm} ; return 1 ;;
98    esac
99    shift
100done
101
102##
103echo ${Titre}"Short names (grid names in Oasis)"${Norm}
104## ===========================================================================
105case ${OCE} in
106    ( *ORC*) oce=orc ;;
107esac
108case ${ATM} in
109    ( *ICO*         ) atm=ico ;;
110    ( *dynamico*    ) atm=ico ;;
111    ( *lmd* | *LMD* ) atm=lmd ;;
112esac
113
114CplModel=${OCE}x${ATM}
115
116##
117echo ${Titre}"Get input files"${Norm}
118## ===========================================================================
119[[ -f ${OCE}_coordinates_mask.nc ]] || cp ${R_IN}/OCE/NEMO/${OCE}/${OCE}_coordinates_mask.nc  .
120[[ -f ${ATM}_grid.nc             ]] || cp ${R_IN}/ATM/GRID/${ATM}_grid.nc                   .
121
122#
123echo ${Titre}"Format for OASIS-MCT files : should be NetCDF3 classic or NetCDF3 64 bits"${Norm}
124# ---------------------------------------------------------------------------
125FL_FMT3=64bit
126
127#
128echo ${Titre}"Cleaning"${Norm}
129# ----------------------------------------------------------------------------
130rm -f grids_${CplModel}.nc masks_${CplModel}.nc areas_${CplModel}.nc
131rm  -f *_tmp.nc
132
133#
134echo ${Titre}"Creates NetCDF3 version of input files"${Norm}
135# ----------------------------------------------------------------------------
136ncks --overwrite --fl_fmt=${FL_FMT} --history ${OCE}_coordinates_mask.nc      ${OCE}_coordinates_mask_${FL_FMT3}.nc
137ncks --overwrite --fl_fmt=${FL_FMT} --history ${ATM}_grid_maskFrom_${OCE}.nc  ${ATM}_grid_maskFrom_${OCE}_${FL_FMT3}.nc
138
139
140#
141echo ${Titre}"Creates ocean fields"${Norm}
142# ----------------------------------------------------------------------------
143for OCEGRID in T U V ; do
144    ncks --fl_fmt=${FL_FMT3} -C --history --append --variable nav_lon_grid_${OCEGRID},nav_lat_grid_${OCEGRID},bounds_lon_grid_${OCEGRID},bounds_lat_grid_${OCEGRID} ${OCE}_coordinates_mask_${FL_FMT3}.nc grids_${CplModel}.nc
145    ncks --fl_fmt=${FL_FMT3} -C --history --append --variable area_grid_${OCEGRID} ${OCE}_coordinates_mask_${FL_FMT3}.nc areas_${CplModel}.nc
146    # Inverts mask values and switch to integer
147    ncks --fl_fmt=${FL_FMT33} --history -C --variable mask_${OCEGRID} ${OCE}_coordinates_mask_${FL_FMT3}.nc mask_${OCEGRID}_tmp.nc
148    ncatted --history \
149            --attribute coordinates,mask_${OCEGRID},d,,         \
150            --attribute online_operation,mask_${OCEGRID},d,,    \
151            --attribute cell_measures,mask_${OCEGRID},d,,       \
152    mask_${OCEGRID}_tmp.nc
153   
154    ncap2 --fl_fmt=${FL_FMT3} --history --append --script "mask_${OCEGRID}=int(1-mask_${OCEGRID});"    mask_${OCEGRID}_tmp.nc masks_${CplModel}.nc
155    rm mask_${OCEGRID}_tmp.nc
156    ncatted --history \
157            --attribute long_name,mask_${OCEGRID},o,c,"Land-sea mask" \
158            --attribute units,mask_${OCEGRID},o,c,"Land:1, Ocean:0"    masks_${CplModel}.nc
159    # Change order of dimensions
160    mv grids_${CplModel}.nc grids_${CplModel}_tmp.nc
161    ncpdq --permute nvertex_grid_${OCEGRID},y_grid_${OCEGRID},x_grid_${OCEGRID} grids_${CplModel}_tmp.nc grids_${CplModel}.nc
162    rm grids_${CplModel}_tmp.nc
163done
164
165ncks --history --append --variable lon,lat ${ATM}_grid_maskFrom_${OCE}_${FL_FMT3}.nc grids_${CplModel}.nc
166 
167#
168echo ${Titre}"We need to have different names for dimensions and variables"${Norm}
169# ----------------------------------------------------------------------------
170ncrename --history --variable lon,alon   grids_${CplModel}.nc
171ncrename --history --variable lat,alat   grids_${CplModel}.nc
172
173if [[ ${ATM} = dynamico* || ${ATM} = ICO* ]] ; then
174    ncks --fl_fmt=${FL_FMT3} --history --append --variable bounds_lon,bounds_lat ${ATM}_grid_maskFrom_${OCE}_${FL_FMT3}.nc grids_${CplModel}.nc
175fi
176
177ncks --fl_fmt=${FL_FMT3} --history -C --append --variable aire   ${ATM}_grid_maskFrom_${OCE}_${FL_FMT3}.nc areas_${CplModel}.nc
178ncatted --history --attribute coordinates,aire,d,,     \
179        --attribute _FillValue,aire,d,,                \
180        --attribute missing_value,aire,d,,             \
181        --attribute online_operation,aire,d,,          \
182        --attribute units,aire,o,c,"m2"                \
183        --attribute standard_name,aire,o,c,"cell_area" \
184        areas_${CplModel}.nc
185
186ncks --fl_fmt=${FL_FMT3} --history -C --variable OceMask         ${ATM}_grid_maskFrom_${OCE}_${FL_FMT3}.nc OceMask_tmp.nc
187ncwa --history --overwrite --average time_counter OceMask_tmp.nc OceMask_tmp2.nc # Suppress time dimension
188ncatted --history \
189        --attribute cell_methods,OceMask,d,c,       \
190        --attribute coordinates,OceMask,d,,         \
191        --attribute online_operation,OceMask,d,,    \
192        --attribute _FillValue,OceMask,d,,          \
193        --attribute missing_value,OceMask,d,,       \
194        OceMask_tmp.nc
195ncap2 --fl_fmt=${FL_FMT3} --history --append --script "OceMask=int(1-OceMask)" OceMask_tmp2.nc masks_${CplModel}.nc # For OASIS, ocean=0, land=1
196rm OceMask_tmp.nc
197ncatted --history \
198        --attribute long_name,OceMask,o,c,"Land-sea mask"   \
199        --attribute units,OceMask,o,c,"Land:1, Ocean:0"  masks_${CplModel}.nc
200
201ncatted --history --attribute history,global,d,, grids_${CplModel}.nc
202ncatted --history --attribute history,global,d,, masks_${CplModel}.nc
203ncatted --history --attribute history,global,d,, areas_${CplModel}.nc
204
205if [[ ${atm} = *dynamico* || ${atm} = ico* ]] ; then
206    ncrename --history --dimension cell,ycell grids_${CplModel}.nc
207    ncrename --history --dimension cell,ycell areas_${CplModel}.nc
208    ncrename --history --dimension cell,ycell masks_${CplModel}.nc
209fi
210# if [[ ${atm} = *lmd* ]] ; then
211#     ncrename --dimension lon,tlmdlon  grids_${CplModel}.nc
212#     ncrename --dimension lat,tlmdlat  grids_${CplModel}.nc
213#     ncrename --dimension lon,tlmdlon  masks_${CplModel}.nc
214#     ncrename --dimension lat,tlmdlat  masks_${CplModel}.nc
215#     ncrename --dimension lon,tlmdlon  areas_${CplModel}.nc
216#     ncrename --dimension lat,tlmdlat  areas_${CplModel}.nc
217# fi
218
219#
220if [[ ${atm} = dynamico* || ${atm} = ico* ]] ; then
221    echo ${Titre}"DYNAMICO grids : 1) Set correct order of dimensions, 2) Add a dimension"${Norm}
222    # -------------------------------------------------------------------------------------------
223    mv grids_${CplModel}.nc grids_${CplModel}_tmp.nc
224    ncpdq --permute nvertex,ycell,xcell  grids_${CplModel}_tmp.nc grids_${CplModel}.nc
225
226    mv grids_${CplModel}.nc grids_${CplModel}_tmp.nc
227    cat <<EOF >add_dim.nco
228//
229defdim("xcell",1) ;
230alat               [ycell,xcell] = alat       ;
231alon               [ycell,xcell] = alon       ;
232bounds_lat [nvertex,ycell,xcell] = bounds_lat ;
233bounds_lon [nvertex,ycell,xcell] = bounds_lon ;
234//
235EOF
236   
237    ncap2 --fl_fmt=${FL_FMT3} --history --append --script-file add_dim.nco  grids_${CplModel}_tmp.nc grids_${CplModel}.nc
238   
239    mv masks_${CplModel}.nc masks_${CplModel}_tmp.nc
240    ncap2 --fl_fmt=${FL_FMT3} --history --append --script 'defdim("xcell",1) '   masks_${CplModel}_tmp.nc masks_${CplModel}.nc
241    mv masks_${CplModel}.nc masks_${CplModel}_tmp.nc
242    ncap2 --fl_fmt=${FL_FMT3} --history --append --script 'OceMask[ycell,xcell]=OceMask'  masks_${CplModel}_tmp.nc masks_${CplModel}.nc
243
244    mv areas_${CplModel}.nc areas_${CplModel}_tmp.nc
245    ncap2 --fl_fmt=${FL_FMT3} --history --append --script 'defdim("xcell",1) ; aire[ycell,xcell]=aire ; ' areas_${CplModel}_tmp.nc areas_${CplModel}.nc
246
247    rm -f grids_${CplModel}_tmp.nc areas_${CplModel}_tmp.nc masks_${CplModel}_tmp.nc
248fi
249 
250#
251echo ${Titre}"Some changes specific to LMDZ lon/lat grid"${Norm}
252# ----------------------------------------------------------------------------
253if [[ ${atm} = lmd* ]] ; then
254    echo ${Titre}"Spreads lon and lat to get 2D fields"${Norm}
255    # -----------------------------------------------------------------------
256    mv grids_${CplModel}.nc grids_${CplModel}_tmp.nc
257    ncap2 --fl_fmt=${FL_FMT3} --history --append --script "alon[lat,lon]=alon; alat[lat,lon]=alat"  grids_${CplModel}_tmp.nc grids_${CplModel}.nc
258    rm -f grids_${CplModel}_tmp.nc
259    ncatted --history \
260            --attribute long_name,alon,o,c,"Longitude"    \
261            --attribute long_name,alat,o,c,"Latitude"     \
262            --attribute units,alon,o,c,"degrees_east"     \
263            --attribute units,alat,o,c,"degrees_north"    \
264            --attribute grid_type,alon,o,c,"P"            \
265            --attribute grid_type,alat,o,c,"P"            \
266            --attribute overlap,alon,o,i,0                \
267            --attribute overlap,alat,o,i,0                grids_${CplModel}.nc
268   
269    echo ${Titre}"Generates cell corners"${Norm}
270    # -----------------------------------------------------------------------
271cat <<EOF > add_bounds.nco
272defdim ("nvertex_lmd", 4) ;
273*delta_x = alon(0,1) - alon(0,0) ;
274*delta_y = alat(1,0) - alat(0,0) ;
275//
276bounds_lon[nvertex_lmd,lat,lon] = 0.0 ;
277bounds_lat[nvertex_lmd,lat,lon] = 0.0 ;
278//
279bounds_lon (0,:,:) = alon + delta_x*0.5 ;
280bounds_lat (0,:,:) = alat + delta_y*0.5 ;
281bounds_lon (1,:,:) = alon + delta_x*0.5 ;
282bounds_lat (1,:,:) = alat - delta_y*0.5 ;
283bounds_lon (2,:,:) = alon - delta_x*0.5 ;
284bounds_lat (2,:,:) = alat - delta_y*0.5 ;
285bounds_lon (3,:,:) = alon - delta_x*0.5 ;
286bounds_lat (3,:,:) = alat + delta_y*0.5 ;
287//
288where (bounds_lat >  90.0 ) bounds_lat =  90.0 ;;
289where (bounds_lat < -90.0 ) bounds_lat = -90.0 ;;
290//
291EOF
292    mv grids_${CplModel}.nc grids_${CplModel}_tmp.nc
293    ncap2 --fl_fmt=${FL_FMT3} --history --script-file add_bounds.nco -O grids_${CplModel}_tmp.nc grids_${CplModel}.nc
294    rm grids_${CplModel}_tmp.nc
295fi
296
297#
298 
299echo ${Titre}"Generates grid o${atm}, 'o' meaning 'one'"${Norm}
300# same as t${atm} grid, with surfaces set to 1
301# and mask to 0 (ocean everywhere, to compute integral over the whole grid))
302# This grid is used when field are quantities instead of fluxes (i.e river flow)
303# ----------------------------------------------------------------------------
304mv grids_${CplModel}.nc grids_${CplModel}_tmp.nc
305ncap2 --fl_fmt=${FL_FMT3} --history --script "o${atm}_lon=alon; o${atm}_lat=alat; bounds_o${atm}_lon=bounds_lon; bounds_o${atm}_lat=bounds_lat; " grids_${CplModel}_tmp.nc grids_${CplModel}.nc
306
307mv areas_${CplModel}.nc areas_${CplModel}_tmp.nc
308ncap2 --fl_fmt=${FL_FMT3} --history --script "o${atm}_aire=aire*0.0d+1.0d; "   areas_${CplModel}_tmp.nc areas_${CplModel}.nc
309
310mv masks_${CplModel}.nc masks_${CplModel}_tmp.nc
311ncap2 --fl_fmt=${FL_FMT3} --history --script "o${atm}_mask=int(OceMask)*0+0; " masks_${CplModel}_tmp.nc masks_${CplModel}.nc
312
313rm grids_${CplModel}_tmp.nc areas_${CplModel}_tmp.nc masks_${CplModel}_tmp.nc
314
315
316echo ${Titre}"Generates grid o${oce}, 'o' meaning 'one'"${Norm}
317# same as t${oce} grid, with surfaces set to 1
318# and mask to 0 (ocean everywhere, to compute integral over the whole grid))
319# This grid is used when field are quantities instead of fluxes (i.e river flow)
320# --------------------------------------------------------------------------------------------------------
321mv grids_${CplModel}.nc grids_${CplModel}_tmp.nc
322ncap2 --fl_fmt=${FL_FMT3} --history --script "nav_lon_grid_O=nav_lon_grid_T; nav_lat_grid_O=nav_lat_grid_T; bounds_lon_grid_O=bounds_lon_grid_T; bounds_lat_grid_O=bounds_o${oce}_lat=bounds_lat_grid_T; " grids_${CplModel}_tmp.nc grids_${CplModel}.nc
323
324mv areas_${CplModel}.nc areas_${CplModel}_tmp.nc
325ncap2 --fl_fmt=${FL_FMT3} --history --script "area_grid_O=area_grid_T*0.0d+1.0d;"   areas_${CplModel}_tmp.nc areas_${CplModel}.nc
326
327ncks -C --history --overwrite -v maskutil_T ${OCE}_coordinates_mask_${FL_FMT3}.nc maskutil_T_${FL_FMT3}.nc
328ncap2 --fl_fmt=${FL_FMT3} --history --append --script "mask_O=maskutil_T; " maskutil_T_${FL_FMT3}.nc masks_${CplModel}.nc
329
330rm grids_${CplModel}_tmp.nc areas_${CplModel}_tmp.nc
331
332
333echo ${Titre}"Creates OCEAN C grid : redundant points removed to compute proper integrals"${Norm}
334# --------------------------------------------------------------------------------------------------------
335
336mv grids_${CplModel}.nc grids_${CplModel}_tmp.nc
337ncap2 --fl_fmt=${FL_FMT3} --history --script "nav_lon_grid_C=nav_lon_grid_T; nav_lat_grid_C=nav_lat_grid_T; bounds_lon_grid_C=bounds_lon_grid_T; bounds_lat_grid_C=bounds_o${oce}_lat=bounds_lat_grid_T; " grids_${CplModel}_tmp.nc grids_${CplModel}.nc
338
339mv areas_${CplModel}.nc areas_${CplModel}_tmp.nc
340ncap2 --fl_fmt=${FL_FMT3} --history --script "area_grid_C=area_grid_T ; "   areas_${CplModel}_tmp.nc areas_${CplModel}.nc
341
342#mv masks_${CplModel}.nc masks_${CplModel}_tmp.nc
343ncap2 --fl_fmt=${FL_FMT3} --history --append --script "mask_C=maskutil_T; " maskutil_T_${FL_FMT3}.nc masks_${CplModel}.nc
344
345rm grids_${CplModel}_tmp.nc areas_${CplModel}_tmp.nc maskutil_T_${FL_FMT3}.nc
346
347#
348echo ${Titre}"Final renaming"${Norm}
349# ----------------------------------------------------------------------------
350for OCEGRID in T U V O C
351do
352    ocegrid=${OCEGRID~} # To lowercase
353    ncrename --history --variable nav_lon_grid_${OCEGRID},${ocegrid}${oce}.lon     grids_${CplModel}.nc
354    ncrename --history --variable nav_lat_grid_${OCEGRID},${ocegrid}${oce}.lat     grids_${CplModel}.nc
355    ncrename --history --variable bounds_lon_grid_${OCEGRID},${ocegrid}${oce}.clo  grids_${CplModel}.nc
356    ncrename --history --variable bounds_lat_grid_${OCEGRID},${ocegrid}${oce}.cla  grids_${CplModel}.nc
357    ncrename --history --variable mask_${OCEGRID},${ocegrid}${oce}.msk             masks_${CplModel}.nc
358    ncrename --history --variable area_grid_${OCEGRID},${ocegrid}${oce}.srf        areas_${CplModel}.nc
359   
360    ncatted --history \
361            --attribute bounds,${ocegrid}${oce}.lon,m,c,"${ocegrid}${oce}.clo"  \
362            --attribute bounds,${ocegrid}${oce}.lat,m,c,"${ocegrid}${oce}.cla"  \
363            --attribute units,${ocegrid}${oce}.clo,o,c,"degrees_east"        \
364            --attribute units,${ocegrid}${oce}.clo,o,c,"degrees_north" grids_${CplModel}.nc
365done
366
367ncrename --history --variable alon,t${atm}.lon                grids_${CplModel}.nc
368ncrename --history --variable alat,t${atm}.lat                grids_${CplModel}.nc
369ncrename --history --variable o${atm}_lon,o${atm}.lon         grids_${CplModel}.nc
370ncrename --history --variable o${atm}_lat,o${atm}.lat         grids_${CplModel}.nc
371ncrename --history --variable OceMask,t${atm}.msk             masks_${CplModel}.nc
372ncrename --history --variable o${atm}_mask,o${atm}.msk        masks_${CplModel}.nc
373ncrename --history --variable aire,t${atm}.srf                areas_${CplModel}.nc
374ncrename --history --variable o${atm}_aire,o${atm}.srf        areas_${CplModel}.nc
375
376ncrename --history --variable bounds_lon,t${atm}.clo          grids_${CplModel}.nc
377ncrename --history --variable bounds_lat,t${atm}.cla          grids_${CplModel}.nc
378ncrename --history --variable bounds_o${atm}_lon,o${atm}.clo  grids_${CplModel}.nc
379ncrename --history --variable bounds_o${atm}_lat,o${atm}.cla  grids_${CplModel}.nc
380
381for ATMGRID in T O ; do
382    atmgrid=${ATMGRID~} # To lowercase
383    ncatted --history \
384            --attribute bounds,${atmgrid}${atm}.lon,c,c,"${atmgrid}${atm}.clo"   \
385            --attribute bounds,${atmgrid}${atm}.lat,c,c,"${atmgrid}${atm}.cla"   \
386            --attribute units,${atmgrid}${atm}.clo,o,c,"degrees_east"            \
387            --attribute units,${atmgrid}${atm}.cla,o,c,"degrees_north"        grids_${CplModel}.nc
388done
389
390##
391echo ${Titre}"Change all NetCDF files to NetCDF 3 format"${Norm}
392## ===========================================================================
393for InFile in areas_${CplModel}.nc grids_${CplModel}.nc masks_${CplModel}.nc ; do
394    if [[ $(ncdump -k ${InFile}) = *netCDF-4* ]] ; then
395        mv ${InFile} tmp_${InFile}
396        ncks --fl_fmt=${FL_FMT3} --history  tmp_${InFile} ${InFile}
397        rm tmp_${InFile}
398    fi
399done
400
401##
402echo ${Titre}"Add some useful information in NetCDF headers"${Norm}
403## ===========================================================================
404UUID=$(uuid)
405NCO=$(ncks --version |& tail -1|sed 's/ncks //')
406for type in areas masks grids ; do
407    ncatted --history \
408            --attribute nco_openmp_thread_number,global,d,,            \
409            --attribute uuid,global,d,,                                \
410            --attribute LongName,global,d,,                            \
411            --attribute NCO,global,o,c,"NCO netCDF Operator ${NCO} http://nco.sourceforge.net" \
412            --attribute Conventions,global,o,c,"CF-1.6"                \
413            --attribute source,global,o,c,"IPSL Earth system model"    \
414            --attribute group,global,o,c,"ICMC IPSL Climate Modelling Center" \
415            --attribute production,global,o,c,"$(finger ${LOGNAME} | head -1 | awk '{print $4, $5}') " \
416            --attribute Institution,global,o,c,"IPSL https://www.ipsl.fr" \
417            --attribute Ocean,global,o,c,"${OCE} https://www.nemo-ocean.eu"  \
418            --attribute Atmosphere,global,o,c,"${ATM} http://lmdz.lmd.jussieu.fr" \
419            --attribute HOSTNAME,global,o,c,"$(hostname)"              \
420            --attribute LOGNAME,global,o,c,"$(whoami)"                 \
421            --attribute Program,global,o,c,"Generated by ${0}"         \
422            --attribute name,global,o,c,"${type}_${CplModel}.nc"       \
423            --attribute directory,global,o,c,"$(pwd)"                  \
424            --attribute description,global,o,c,"Fields needed by OASIS-MCT" \
425            --attribute title,global,o,c,"${type}_${CplModel}.nc"      \
426            --attribute timeStamp,global,o,c,"$(date)"                 \
427            --attribute associatedFiles,global,o,c,"grids_${CplModel}.nc areas_${CplModel}.nc masks_${CplModel}.nc" \
428            --attribute originalFiles,global,o,c,"${OCE}_coordinates_mask.nc ${ATM}_grid_mask.nc"\
429            --attribute uuid,global,o,c,"${UUID}"                      \
430            --attribute OS,global,o,c,"$(uname -o)"                    \
431            --attribute release,global,o,c,"$(uname -r)"               \
432            --attribute hardware,global,o,c,"$(uname -i)"              \
433            --attribute SVN_Author,global,o,c,"$Author$"      \
434            --attribute SVN_Date,global,o,c,"$Date$" \
435            --attribute SVN_Revision,global,o,c,"$Revision$"                    \
436            --attribute SVN_Id,global,o,c,"$Id$" \
437            --attribute SVN_HeardURL,global,o,c,"$HeadURL $" \
438            ${type}_${CplModel}.nc
439done
440
441
442exit
443#
444echo ${Titre}"Name of the dimensions ?"${Norm} 
445# ----------------------------------------------------------------------------
446for OCEGRID in T U V ; do
447    ocegrid=${OCEGRID~} # Downcase name of grids
448    ncrename --history --dimension  x_grid_${OCEGRID},x${ocegrid}${oce}         grids_${CplModel}.nc
449    ncrename --history --dimension  y_grid_${OCEGRID},y${ocegrid}${oce}         grids_${CplModel}.nc
450    ncrename --history --dimension  nvertex_grid_${OCEGRID},crn${ocegrid}${oce} grids_${CplModel}.nc
451done
452
453## ===========================================================================
454echo ${Titre}"Exit from CreateOasisGrids "${Norm}
455
456## ===========================================================================
457##
458echo ${Titre}"                  That's all folk's !!!   "${Norm}
459##
460## ===========================================================================
Note: See TracBrowser for help on using the repository browser.