Ignore:
Timestamp:
07/29/10 15:56:30 (14 years ago)
Author:
mafoipsl
Message:

abrupt4xCO22 IPSL CMIP5 simulation registration.

Location:
CMIP5/abrupt4xCO2/abrupt4xCO22/COMP
Files:
8 edited

Legend:

Unmodified
Added
Removed
  • CMIP5/abrupt4xCO2/abrupt4xCO22/COMP/lmdz.card

    r1080 r1103  
    1818 
    1919# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 
    20 LMDZ_COSP_OK=n 
     20LMDZ_COSP_OK=y 
    2121LMDZ_COSP_monthly=y 
    22 LMDZ_COSP_daily=y 
     22LMDZ_COSP_daily=n 
    2323LMDZ_COSP_hf=n 
    2424 
     
    4040 
    4141[BoundaryFiles] 
    42 List=   () 
    43 # With AR5 aerosols (including ASSO4M(=SO4), CSSO4M, AIBCM, ASBCM, AIPOMM, ASPOMM, ASSSM, CSSSM, SSSSM, CIDUSTM) 
    44 # With AR5 ozone(tropo + strato from LMDZOR-INCA-REPROBUS simulations) 
     42List=       () 
    4543ListNonDel= (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_1855.nc, aerosols.nat.nc),\ 
    46             (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/climoz_LMDZ_1855.nc, climoz_LMDZ.nc) 
     44            (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/climoz_LMDZ_1855.nc, climoz_LMDZ.nc) 
    4745 
    4846[SmoothFiles] 
    49 List=   () 
     47List=   () 
    5048 
    5149[ParametersFiles] 
     
    6260 
    6361[OutputText] 
    64 List=   (lmdz.x.prt) 
     62List=   () 
    6563 
    6664[OutputFiles] 
     
    7674        (histhfNMC.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,    Post_HF_histhfNMC),   \ 
    7775        (histhf3h.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,     Post_3H_histhf3h),    \ 
    78         (histhf3hm.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,    Post_3H_histhf3hm) 
     76        (histhf3hm.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,    Post_3H_histhf3hm) 
    7977 
    8078[Post_1M_histmth] 
     
    120118ChunckJob2D = 200Y 
    121119TimeSeriesVars3D = (rhum, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres) 
    122 ChunckJob3D = OFF 
     120ChunckJob3D = 10Y 
    123121Seasonal=OFF 
    124122 
     
    147145ChunckJob2D = 50Y 
    148146TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv) 
    149 ChunckJob3D = OFF 
     147ChunckJob3D = 10Y 
    150148Seasonal=OFF 
    151149 
     
    154152GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds, aire) 
    155153TimeSeriesVars2D = () 
    156 ChunckJob2D = NONE 
     154ChunckJob2D = NONE  
    157155TimeSeriesVars3D = () 
    158156ChunckJob3D = NONE 
  • CMIP5/abrupt4xCO2/abrupt4xCO22/COMP/lmdz.driver

    r1012 r1103  
    5353        esac 
    5454        case ${frequency} in 
    55             HF|hf) ok_hf=y ;; 
     55            HF|hf)  
     56                ok_hf=y 
     57                OK_instan=y 
     58                ;; 
    5659        esac 
    5760    done 
     
    114117 
    115118    ## To have more variables in output files for aerosols. Parameters are set in lmdz.card 
    116     if [ ${CumulPeriod}%${LMDZ_Freq_aero} -le ${LMDZ_Length_aero} ]; then 
    117        if [ ${CumulPeriod}%${LMDZ_Freq_aero} -ne 0 ]; then  
    118           lev_histmth=4 
    119        else 
    120           lev_histmth=2     
    121        fi 
    122     else 
    123        lev_histmth=2 
    124     fi     
     119    #if [ ${CumulPeriod}%${LMDZ_Freq_aero} -le ${LMDZ_Length_aero} ]; then 
     120    #   if [ ${CumulPeriod}%${LMDZ_Freq_aero} -ne 0 ]; then  
     121    #      lev_histmth=4 
     122    #   else 
     123    #      lev_histmth=2     
     124    #   fi 
     125    #else 
     126    #   lev_histmth=2 
     127    #fi     
    125128 
    126129    ## algo : For CumulPeriod=1 ;  
     
    150153    LMDZ_sed physiq.def OK_journe   ${OK_journe} 
    151154    LMDZ_sed physiq.def OK_mensuel  ${OK_mensuel} 
    152     LMDZ_sed physiq.def lev_histmth ${lev_histmth} 
     155    #LMDZ_sed physiq.def lev_histmth ${lev_histmth} 
    153156    LMDZ_sed physiq.def ok_hf       ${ok_hf} 
    154157    LMDZ_sed physiq.def ecrit_mth   ${LMDZ_ecrit_mth} 
     
    159162    LMDZ_sed physiq.def ok_hfCOSP   ${LMDZ_COSP_hf} 
    160163    LMDZ_sed physiq.def ok_histNMC  "${LMDZ_NMC_monthly}, ${LMDZ_NMC_daily}, ${LMDZ_NMC_hf}" 
     164 
    161165 
    162166    ## gcm.def parameters : no change since gcm.def_${RESOL_ATM_3D} is used and already modified 
  • CMIP5/abrupt4xCO2/abrupt4xCO22/COMP/oasis.card

    r992 r1103  
    3131 
    3232[OutputText] 
    33 List=   (cplout, Oasis.prt) 
     33List=   (cplout) 
    3434 
    3535[OutputFiles] 
  • CMIP5/abrupt4xCO2/abrupt4xCO22/COMP/opa9.card

    r1040 r1103  
    1010# OUTPUT_LEVEL=2 for standard daily outputs 
    1111# OUTPUT_LEVEL=3 for more daily outputs 
    12 OUTPUT_LEVEL=2 
     12OUTPUT_LEVEL=3 
    1313 
    1414[InitialStateFiles] 
     
    4545 
    4646[OutputText] 
    47 List=   (ocean.output, oceanx.prt, solver.stat) 
     47List=   (ocean.output, solver.stat) 
    4848 
    4949[OutputFiles] 
     
    122122ChunckJob2D = 200Y 
    123123TimeSeriesVars3D = (vosaline,votemper) 
    124 ChunckJob3D = OFF 
     124ChunckJob3D = 10Y 
    125125Seasonal=OFF 
    126126 
     
    131131ChunckJob2D = 200Y 
    132132TimeSeriesVars3D = (vozocrtx) 
    133 ChunckJob3D = OFF 
     133ChunckJob3D = 10Y 
    134134Seasonal=OFF 
    135135 
     
    140140ChunckJob2D = 200Y 
    141141TimeSeriesVars3D = (vomecrty) 
    142 ChunckJob3D = OFF 
     142ChunckJob3D = 10Y 
    143143Seasonal=OFF 
    144144 
  • CMIP5/abrupt4xCO2/abrupt4xCO22/COMP/orchidee.card

    r1086 r1103  
    3434 
    3535[Post_1M_sechiba_history] 
    36 Patches = () 
    37 GatherWithInternal = (lon, lat, veget, time_counter, time_counter_bnds, Areas, Contfrac) 
    38 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, bqsb, evap, fluxlat, fluxsens, gqsb, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac) 
    39 ChunckJob2D = NONE 
    40 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, CO2FLUX, ptn, nee) 
    41 ChunckJob3D = NONE 
    42 Seasonal=ON 
     36Patches= () 
     37GatherWithInternal= (lon, lat, veget, time_counter, time_counter_bnds, Areas, Contfrac) 
     38TimeSeriesVars2D= (nobiofrac, alb_nir, alb_vis, bqsb, evap, fluxlat, fluxsens, gqsb, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac) 
     39ChunckJob2D= NONE 
     40TimeSeriesVars3D= (lai, maxvegetfrac, vegetfrac, CO2FLUX, ptn, nee) 
     41ChunckJob3D= NONE 
     42Seasonal= ON 
    4343 
    4444[Post_HF_sechiba_out_2] 
  • CMIP5/abrupt4xCO2/abrupt4xCO22/COMP/orchidee.driver

    r1050 r1103  
    9494    # Outputs HF in HISTFILE2 if required 
    9595    [ X${SRF_ok_hf} = Xy ] && ORCHIDEE_sed SECHIBA_HISTFILE2 y 
    96  
    9796    ORCHIDEE_sed SECHIBA_HISTLEVEL2 1 
    9897    ORCHIDEE_sed WRITE_STEP2 10800.0 
  • CMIP5/abrupt4xCO2/abrupt4xCO22/COMP/pisces.card

    r1032 r1103  
    4444GatherWithInternal = (nav_lon, nav_lat, deptht, time_counter, time_counter_bnds) 
    4545TimeSeriesVars2D = () 
    46 ChunckJob2D = OFF 
     46ChunckJob2D = NONE 
    4747TimeSeriesVars3D = (Alkalini, BFe, BSi, CaCO3, DCHL, DFe, DIC, DOC, DSi, Fer, GOC, NCHL, NFe, NH4, NO3, O2, PHY, PHY2, PO4, POC, SFe, Si, ZOO, ZOO2) 
    48 ChunckJob3D = OFF 
     48ChunckJob3D = 100Y 
    4949Seasonal=ON 
    5050 
     
    5555ChunckJob2D = NONE 
    5656TimeSeriesVars3D = (CO3, CO3sat, DCAL, GRAZ, PAR, PBSi, PCAL, PFeD, PFeN, PH, PPNEWD, PPNEWN, PPPHY, PPPHY2) 
    57 ChunckJob3D = OFF 
     57ChunckJob3D = 100Y 
    5858Seasonal=ON 
    5959 
     
    6464ChunckJob2D = NONE 
    6565TimeSeriesVars3D = (CHLT, EXPC, EXPCAL, EXPFE, EXPSI, PFET, PHYT, POCT, TPBFE, TPNEW, TPP, ZOOT) 
    66 ChunckJob3D = OFF 
     66ChunckJob3D = 100Y 
    6767Seasonal=ON 
  • CMIP5/abrupt4xCO2/abrupt4xCO22/COMP/pisces.driver

    r972 r1103  
    1010    grep "^ *$1 *=" $2 | sed -e "s% *\!.*%%" 
    1111} 
    12  
    13     ##--Variables used by OPA -- 
    14  
    1512 
    1613    ##--Variables used by MBG -- 
Note: See TracChangeset for help on using the changeset viewer.