Context Navigation

← Previous Change
Next Change →

Changeset 126 for CONFIG

Timestamp:

08/08/07 17:10:00 (17 years ago)

Author:

mafoipsl

Message:

1.9 tag in config.card
orchidee.def simplification and up-to-date

Location:

CONFIG/trunk/IPSLCM4_v2/EXP00

Files:

: 2 edited

PARAM/orchidee.def (modified) (1 diff)
config.card (modified) (1 diff)

Legend:

: Unmodified
: Added
: Removed

CONFIG/trunk/IPSLCM4_v2/EXP00/PARAM/orchidee.def

-                      r118
+                      r126
+#
-#**************************************************************************
-#                    Namelist for ORCHIDEE
-#**************************************************************************
+#
+#
+#**************************************************************************
+#          OPTIONS NOT SET
+#**************************************************************************
+# Parameter file for IPSLCM4_v2 configuration
+# See comments : http://forge.ipsl.jussieu.fr/orchidee/
+#
+#
+#**************************************************************************
+#          Management of display in the run of ORCHIDEE
+#**************************************************************************
+# Model chatting level
+# level of online diagnostics in STOMATE (0-4)
+# With this variable, you can determine how much online information STOMATE
+#  gives during the run. 0 means virtually no info.
+BAVARD = 1
+# default = 1
+# Flag for debug information
+# This option allows to switch on the output of debug
+#         information without recompiling the code.
+DEBUG_INFO = n
+#default = n
+# ORCHIDEE will print more messages
+# This flag permits to print more debug messages in the run.
+LONGPRINT = n
+#default = n
+#---------------------------------------------------------------------
+# Should the output follow the ALMA convention
+# If this logical flag is set to true the model
+#  will output all its data according to the ALMA
+#  convention. It is the recommended way to write
+#  data out of ORCHIDEE.
+ALMA_OUTPUT = n
+# default = n
+# To reset the time coming from SECHIBA restart file
+# This option allows the model to override the time
+#  found in the restart file of SECHIBA with the time
+#  of the first call. That is the restart time of the GCM.
+SECHIBA_reset_time = n
+# default = n
+#**************************************************************************
+#          Files : incoming / forcing / restart /output
+#**************************************************************************
+# Ancillary files :
+#---------------------------------------------------------------------
+# Name of file from which the vegetation map is to be read
+# If !IMPOSE_VEG
+# If LAND_USE
+#   default = pft_new.nc
+#   The name of the file to be opened to read a vegetation
+#   map (in pft) is to be given here.
+# If !LAND_USE
+#   default = ../surfmap/carteveg5km.nc
+#   The name of the file to be opened to read the vegetation
+#   map is to be given here. Usualy SECHIBA runs with a 5kmx5km
+#   map which is derived from the IGBP one. We assume that we have
+#   a classification in 87 types. This is Olson modified by Viovy.
+VEGETATION_FILE = carteveg5km.nc
+# Name of file from which the bare soil albedo
+# If !IMPOSE_AZE
+# The name of the file to be opened to read the soil types from
+#  which we derive then the bare soil albedos. This file is 1x1
+#  deg and based on the soil colors defined by Wilson and Henderson-Seller.
+SOILALB_FILE = soils_param.nc
+# default = ../surfmap/soils_param.nc
+# Name of file from which soil types are read
+# If !IMPOSE_VEG
+# The name of the file to be opened to read the soil types.
+#  The data from this file is then interpolated to the grid of
+#  of the model. The aim is to get fractions for sand loam and
+#  clay in each grid box. This information is used for soil hydrology
+#  and respiration.
+SOILTYPE_FILE = soils_param.nc
+# default = ../surfmap/soils_param.nc
+# Name of file from which the reference
+# The name of the file to be opened to read
+#  temperature is read
+#  the reference surface temperature.
+#  The data from this file is then interpolated
+#  to the grid of the model.
+#  The aim is to get a reference temperature either
+#  to initialize the corresponding prognostic model
+#  variable correctly (ok_dgvm = TRUE) or to impose it
+#  as boundary condition (ok_dgvm = FALSE)
+REFTEMP_FILE = reftemp.nc
+# default = reftemp.nc
+# Forcing file name
+# Name of file containing the forcing data
+# This is the name of the file which should be opened
+# for reading the forcing data of the dim0 model.
+# The format of the file has to be netCDF and COADS
+# compliant. Cabauw.nc, islscp_for.nc, WG_cru.nc
+FORCING_FILE = islscp_for.nc
+# default = islscp_for.nc
+# Input and output restart file for the driver
+#---------------------------------------------------------------------
+# Name of restart to READ for initial conditions
+# This is the name of the file which will be opened
+#  to extract the initial values of all prognostic
+#  values of the model. This has to be a netCDF file.
+#  Not truly COADS compliant. NONE will mean that
+#  no restart file is to be expected.
+RESTART_FILEIN = NONE
+# default = NONE
+# Name of restart files to be created by the driver
+# This variable give the  name for
+#  the restart file. The restart software within
+#  IOIPSL will add .nc if needed
+RESTART_FILEOUT = driver_rest_out.nc
+# default = driver_rest_out.nc
+# Input and output restart file for SECHIBA :
+#---------------------------------------------------------------------
+# Name of restart to READ for initial conditions
+# This is the name of the file which will be opened
+#  to extract the initial values of all prognostic
+#  values of the model. This has to be a netCDF file.
+#  Not truly COADS compliant. NONE will mean that
+#  no restart file is to be expected.
+SECHIBA_restart_in = _start_sech_
+# default = NONE
+# Name of restart files to be created by SECHIBA
+# This variable give the name for the restart files.
+#  The restart software within IOIPSL will add .nc if needed.
+SECHIBA_rest_out = sechiba_rest.nc
+# default = sechiba_rest_out.nc
+# Input and output restart file for STOMATE :
+#---------------------------------------------------------------------
+# Name of restart to READ for initial conditions of STOMATE
+# If STOMATE_OK_STOMATE || STOMATE_WATCHOUT
+# This is the name of the file which will be opened of STOMATE
+#   to extract the initial values of all prognostic values of STOMATE.
+STOMATE_RESTART_FILEIN = NONE
+# default = NONE
+# Name of restart files to be created by STOMATE
+# If STOMATE_OK_STOMATE || STOMATE_WATCHOUT
+# This is the name of the file which will be opened
+#        to write the final values of all prognostic values
+#        of STOMATE.
+STOMATE_RESTART_FILEOUT = stomate_rest_out.nc
+# default = stomate_restart.nc
+# Forcing files for TESTSTOMATE and FORCESOIL
+#---------------------------------------------------------------------
+# Name of STOMATE's forcing file
+# Name that will be given to STOMATE's offline forcing file
+STOMATE_FORCING_NAME = stomate_forcing.nc
+#default = NONE
+# Size of STOMATE forcing data in memory (MB)
+# This variable determines how many
+#  forcing states will be kept in memory.
+#  Must be a compromise between memory
+#  use and frequeny of disk access.
+STOMATE_FORCING_MEMSIZE = 50
+# default = 50
+# Name of STOMATE's carbon forcing file
+# Name that will be given to STOMATE's carbon offline forcing file
+STOMATE_CFORCING_NAME = stomate_Cforcing.nc
+# default = NONE
+# Produced forcing file name (SECHIBA puis STOMATE) :
+#---------------------------------------------------------------------
+# ORCHIDEE will write out its forcing to a file
+# This flag allows to write to a file all the variables
+#  which are used to force the land-surface. The file
+#  has exactly the same format than a normal off-line forcing
+#  and thus this forcing can be used for forcing ORCHIDEE.
+ORCHIDEE_WATCHOUT = n
+# default = n
+# Filenane for the ORCHIDEE forcing file
+# If ORCHIDEE_WATCHOUT
+# This is the name of the file in which the
+#  forcing used here will be written for later use.
+WATCHOUT_FILE = orchidee_watchout.nc
+# default = orchidee_watchout.nc
+# ORCHIDEE will write out with this frequency
+# If ORCHIDEE_WATCHOUT
+# This flag indicates the frequency of the write of the variables.
+DT_WATCHOUT = 1800
+# default = dt
+# STOMATE does minimum service
+# set to TRUE if you want STOMATE to read
+#  and write its start files and keep track
+#  of longer-term biometeorological variables.
+#  This is useful if OK_STOMATE is not set,
+#  but if you intend to activate STOMATE later.
+#  In that case, this run can serve as a
+#  spinup for longer-term biometeorological
+#  variables.
+STOMATE_WATCHOUT = n
+# default = n
+# Output file name (SECHIBA and STOMATE) :
+#---------------------------------------------------------------------
+# Name of file in which the output is going
+# This file is going to be created by the model
+#  to be written
+#  and will contain the output from the model.
+#  This file is a truly COADS compliant netCDF file.
+#  It will be generated by the hist software from
+#  the IOIPSL package.
+OUTPUT_FILE = sechiba_out.nc
+# default = cabauw_out.nc
+# Flag to switch on histfile 2 for SECHIBA (hi-frequency ?)
+# This Flag switch on the second SECHIBA writing for hi (or low)
+#  frequency writing. This second output is optional and not written
+#  by default.
+SECHIBA_HISTFILE2 = FALSE
+# default  = FALSE
+# Name of file in which the output number 2 is going
+#   to be written
+# If SECHIBA_HISTFILE2
+# This file is going to be created by the model
+#   and will contain the output 2 from the model.
+SECHIVA_OUTPUT_FILE2 = sechiba_out_2.nc
+# default  = sechiba_out_2.nc
+# Name of file in which STOMATE's output is going to be written
+# This file is going to be created by the model
+#  and will contain the output from the model.
+#  This file is a truly COADS compliant netCDF file.
+#  It will be generated by the hist software from
+#  the IOIPSL package.
+STOMATE_OUTPUT_FILE = stomate_history.nc
+# default = stomate_history.nc
+# Write levels for outputs files (number of variables) :
+#---------------------------------------------------------------------
+# SECHIBA history output level (0..10)
+# Chooses the list of variables in the history file.
+#  Values between 0: nothing is written; 10: everything is
+#  written are available More details can be found on the web under documentation.
+#  web under documentation.
+SECHIBA_HISTLEVEL = 5
+# default = 5
+# SECHIBA history 2 output level (0..10)
+# If SECHIBA_HISTFILE2
+# Chooses the list of variables in the history file.
+#   Values between 0: nothing is written; 10: everything is
+#   written are available More details can be found on the web under documentation.
+#   web under documentation.
+# First level contains all ORCHIDEE outputs.
+SECHIBA_HISTLEVEL2 = 1
+# default = 1
+# STOMATE history output level (0..10)
+#  0: nothing is written; 10: everything is written
+STOMATE_HISTLEVEL = 10
+# default = 10
+# Write frequency for output files (SECHIBA in seconds et
+# STOMATE in days) :
+#---------------------------------------------------------------------
+# Frequency in seconds at which to WRITE output
+# This variables gives the frequency the output of
+#  the model should be written into the netCDF file.
+#  It does not affect the frequency at which the
+#  operations such as averaging are done.
+WRITE_STEP = 86400.0
+# default = 86400.0
+# Frequency in seconds at which to WRITE output
+# If SECHIBA_HISTFILE2
+# This variables gives the frequency the output 2 of
+#   the model should be written into the netCDF file.
+#   It does not affect the frequency at which the
+#   operations such as averaging are done.
+#   That is IF the coding of the calls to histdef
+#   are correct !
+WRITE_STEP2 = 1800.0
+# default = 1800.0
+# STOMATE history time step (d)
+# Time step of the STOMATE history file
+# Care : this variable must be higher than DT_SLOW
+STOMATE_HIST_DT = 10.
+# default = 10
+#**************************************************************************
+#                             Area location
+#**************************************************************************
+#  The model will use the smalest regions from
+#  region specified here and the one of the forcing file.
+# Western limit of region
+# Western limit of the region we are
+#  interested in. Between -180 and +180 degrees
+LIMIT_WEST = -180.
+# default = -180.
+# Eastern limit of region
+# Eastern limit of the region we are
+#  interested in. Between -180 and +180 degrees
+LIMIT_EAST = 180.
+# default = 180.
+# Northern limit of region
+# Northern limit of the region we are
+#  interested in. Between +90 and -90 degrees
+LIMIT_NORTH = 90.
+# default = 90.
+# Southern limit of region
+# Southern limit of the region we are
+#  interested in. Between 90 and -90 degrees
+LIMIT_SOUTH = -90.
+# default = -90.
+##**************************************************************************
+#                       Simulation parameters
+#**************************************************************************
+# method of forcing
+# A method is proposed by which the first atmospheric
+#   level is not directly forced by observations but
+#   relaxed with a time constant towards observations.
+#   For the moment the methods tends to smooth too much
+#   the diurnal cycle and introduces a time shift.
+#   A more sophisticated method is needed.
+RELAXATION = n
+# default = n
+# Time constant of the relaxation layer RELAXATION
+# The time constant associated to the atmospheric
+#  conditions which are going to be computed
+#  in the relaxed layer. To avoid too much
+#  damping the value should be larger than 1000.
+RELAX_A = 1000.
+# default = 1000.0
+# Height at which T and Q are given
+# The atmospheric variables (temperature and specific
+#  humidity) are measured at a specific level.
+#  The height of this level is needed to compute
+#  correctly the turbulent transfer coefficients.
+#  Look at the description of the forcing
+#  DATA for the correct value.
+HEIGHT_LEV1 = 2.0
+# default  = 2.0
+# Height at which the wind is given
+# The height at which wind is needed to compute
+#  correctly the turbulent transfer coefficients.
+HEIGHT_LEVW = 10.0
+# default  = 10.0
+#---------------------------------------------------------------------
+# Weather generator or not :
+#---------------------------------------------------------------------
+# Allow weather generator to create data.
+# This flag allows the forcing-reader to generate
+#  synthetic data if the data in the file is too sparse
+#  and the temporal resolution would not be enough to
+#  run the model.
+ALLOW_WEATHERGEN = n
+# default = n
+# North-South Resolution
+# If ALLOW_WEATHERGEN
+# North-South Resolution of the region we are
+#  interested in. In degrees
+MERID_RES = 2.
+# default = 2.
+# East-West Resolution
+# If ALLOW_WEATHERGEN
+# East-West Resolution of the region we are
+#  interested in. In degrees
+ZONAL_RES = 2.
+# default = 2.
+# Use prescribed values
+# If ALLOW_WEATHERGEN
+# If this is set to 1, the weather generator
+#   uses the monthly mean values for daily means.
+#   If it is set to 0, the weather generator
+#   uses statistical relationships to derive daily
+#   values from monthly means.
+IPPREC = 0
+# default = 0
+# Interpolation  or not IF split is larger than 1
+# Choose IF you wish to interpolate linearly or not.
+NO_INTER = y
+INTER_LIN = n
+# default :
+#  NO_INTER = y
+#  INTER_LIN = n
+# Exact monthly precipitation
+# If ALLOW_WEATHERGEN
+# If this is set to y, the weather generator
+#   will generate pseudo-random precipitations
+#   whose monthly mean is exactly the prescribed one.
+#   In this case, the daily precipitation (for rainy
+#   days) is constant (that is, some days have 0 precip,
+#   the other days have precip = Precip_month/n_precip,
+#   where n_precip is the prescribed number of rainy days
+#   per month).
+WEATHGEN_PRECIP_EXACT = n
+# default = n
+# Calling frequency of weather generator (s)
+# Determines how often the weather generator
+#  is called (time step in s). Should be equal
+#  to or larger than Sechiba's time step (say,
+#  up to 6 times Sechiba's time step or so).
+DT_WEATHGEN = 1800.
+# default = 1800.
+# Conserve net radiation in the forcing
+# When the interpolation is used the net radiation
+#  provided by the forcing is not conserved anymore.
+#  This should be avoided and thus this option should
+#  be TRUE (y).
+#  This option is not used for short-wave if the
+#  time-step of the forcing is longer than an hour.
+#  It does not make sense to try and reconstruct
+#  a diurnal cycle and at the same time conserve the
+#  incoming solar radiation.
+NETRAD_CONS = y
+# default = y
+# Write weather from generator into a forcing file
+# This flag makes the weather generator dump its
+#  generated weather into a forcing file which can
+#  then be used to get the same forcing on different
+#  machines. This only works correctly if there is
+#  a restart file (otherwise the forcing at the first
+#  time step is slightly wrong).
+DUMP_WEATHER = n
+# défault = n
+# Name of the file that contains
+#  the weather from generator
+# If DUMP_WEATHER
+DUMP_WEATHER_FILE = weather_dump.nc
+# default = 'weather_dump.nc'
+# Dump weather data on gathered grid
+# If 'y', the weather data are gathered
+#  for all land points.
+# If DUMP_WEATHER
+DUMP_WEATHER_GATHERED = y
+# default = y
+# Read Orbital Parameters
+# Eccentricity Effect
+# Use prescribed values
+# IF ALLOW_WEATHERGEN
+ECCENTRICITY = 0.016724
+# default = 0.016724
+# Longitude of perihelie
+# Use prescribed values
+# If ALLOW_WEATHERGEN
+PERIHELIE = 102.04
+# default = 102.04
+# Use prescribed values
+# If ALLOW_WEATHERGEN
+OBLIQUITY = 23.446
+# default = 23.446
+#**************************************************************************
+# length of simulation :
+#---------------------------------------------------------------------
+# Length of the integration in time.
+# Length of integration. By default the entire length
+#        of the forcing is used. The FORMAT of this date can
+#        be either of the following :
+# n   : time step n within the forcing file
+# nS  : n seconds after the first time-step in the file
+# nD  : n days after the first time-step
+# nM  : n month after the first time-step (year of 365 days)
+# nY  : n years after the first time-step (year of 365 days)
+#        Or combinations :
+# nYmM: n years and m month
+TIME_LENGTH = default
+# default = depend on the time length and the number of time step in forcing file
+#         = itau_len = itau_fin-itau_dep
+# split time step :
+#---------------------------------------------------------------------
+# Splits the timestep imposed by the forcing
+# With this value the time step of the forcing
+#  will be devided. In principle this can be run
+#  in explicit mode but it is strongly suggested
+#  to use the implicit method so that the
+#  atmospheric forcing has a smooth evolution.
+SPLIT_DT = 12
+# default = 12
+#  Time in the forcing file at which the model is started.
+#  This time give the point in time at which the model
+#  should be started.
+#  If exists, the date of the restart file is use.
+#  The FORMAT of this date can be either of the following :
+#  n   : time step n within the forcing file
+#  nS  : n seconds after the first time-step in the file
+#  nD  : n days after the first time-step
+#  nM  : n month after the first time-step (year of 365 days)
+#  nY  : n years after the first time-step (year of 365 days)
+#      Or combinations :
+#  nYmM: n years and m month
+TIME_SKIP = 0
+# default = 0
+# Number of time steps per year for carbon spinup
+FORCESOIL_STEP_PER_YEAR = 12
+# default = 12
+# ???
+FORCESOIL_NB_YEAR = 1
+# default = 1
+# Spread the precipitation.
+# Spread the precipitaiton over n steps of the splited forcing time step.
+#  This is ONLY applied if the forcing time step has been splited (SPLIT_DT).
+#  If the value indicated is greater than SPLIT_DT, SPLIT_DT is used for it.
+SPRED_PREC = 1
+# default = 1
+#---------------------------------------------------------------------
+# Parametrization :
+#---------------------------------------------------------------------
+# Activate STOMATE?
+# set to TRUE if STOMATE is to be activated
+STOMATE_OK_STOMATE = n
+# default = n
+# Activate DGVM?
+# set to TRUE if Dynamic Vegetation DGVM is to be activated
+STOMATE_OK_DGVM = n
+# default = n
+# Activate CO2?
+# set to TRUE if photosynthesis is to be activated
+STOMATE_OK_CO2 = y
+# default = n
+# Flag to force the value of atmospheric CO2 for vegetation.
+# If this flag is set to true, the ATM_CO2 parameter is used
+#  to prescribe the atmospheric CO2.
+# This Flag is only use in couple mode.
+FORCE_CO2_VEG = FALSE
+# default = FALSE
+# Value for atm CO2.
+# If FORCE_CO2_VEG (in not forced mode)
+# Value to prescribe the atm CO2.
+#  For pre-industrial simulations, the value is 286.2 .
+#  348. for 1990 year.
+ATM_CO2 = 350.
+# default = 350.
+# Index of grid point for online diagnostics
+# This is the index of the grid point which will be used for online diagnostics.
+STOMATE_DIAGPT = 1
+# default = 1
+# constant tree mortality
+# If yes, then a constant mortality is applied to trees.
+#  Otherwise, mortality is a function of the trees'
+#  vigour (as in LPJ).
+LPJ_GAP_CONST_MORT = y
+# default = y
+# no fire allowed
+# With this variable, you can allow or not
+#  the estimation of CO2 lost by fire
+FIRE_DISABLE = n
+# default = n
+# parameters describing the surface (vegetation + soil) :
+#---------------------------------------------------------------------
+#
+# Should the vegetation be prescribed
+# This flag allows the user to impose a vegetation distribution
+#  and its characterisitcs. It is espacially interesting for 0D
+#  simulations. On the globe it does not make too much sense as
+#  it imposes the same vegetation everywhere
+IMPOSE_VEG = n
+# default = n
+# Flag to use old "interpolation" of vegetation map.
+# IF NOT IMPOSE_VEG
+#  If you want to recover the old (ie orchidee_1_2 branch)
+#   "interpolation" of vegetation map.
+SLOWPROC_VEGET_OLD_INTERPOL = n
+# default = n
+# Vegetation distribution within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of vegetation is read from the restart file. If
+#  it is not found there we will use the values provided here.
+SECHIBA_VEG__01 = 0.2
+SECHIBA_VEG__02 = 0.0
+SECHIBA_VEG__03 = 0.0
+SECHIBA_VEG__04 = 0.0
+SECHIBA_VEG__05 = 0.0
+SECHIBA_VEG__06 = 0.0
+SECHIBA_VEG__07 = 0.0
+SECHIBA_VEG__08 = 0.0
+SECHIBA_VEG__09 = 0.0
+SECHIBA_VEG__10 = 0.8
+SECHIBA_VEG__11 = 0.0
+SECHIBA_VEG__12 = 0.0
+SECHIBA_VEG__13 = 0.0
+# default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0
+# Maximum vegetation distribution within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of vegetation is read from the restart file. If
+#  it is not found there we will use the values provided here.
+SECHIBA_VEGMAX__01 = 0.2
+SECHIBA_VEGMAX__02 = 0.0
+SECHIBA_VEGMAX__03 = 0.0
+SECHIBA_VEGMAX__04 = 0.0
+SECHIBA_VEGMAX__05 = 0.0
+SECHIBA_VEGMAX__06 = 0.0
+SECHIBA_VEGMAX__07 = 0.0
+SECHIBA_VEGMAX__08 = 0.0
+SECHIBA_VEGMAX__09 = 0.0
+SECHIBA_VEGMAX__10 = 0.8
+SECHIBA_VEGMAX__11 = 0.0
+SECHIBA_VEGMAX__12 = 0.0
+SECHIBA_VEGMAX__13 = 0.0
+# default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0
+# LAI for all vegetation types (0-dim mode)
+# If IMPOSE_VEG
+# The maximum LAI used in the 0dim mode. The values should be found
+#  in the restart file. The new values of LAI will be computed anyway
+#  at the end of the current day. The need for this variable is caused
+#  by the fact that the model may stop during a day and thus we have not
+#  yet been through the routines which compute the new surface conditions.
+SECHIBA_LAI__01 = 0.
+SECHIBA_LAI__02 = 8.
+SECHIBA_LAI__03 = 8.
+SECHIBA_LAI__04 = 4.
+SECHIBA_LAI__05 = 4.5
+SECHIBA_LAI__06 = 4.5
+SECHIBA_LAI__07 = 4.
+SECHIBA_LAI__08 = 4.5
+SECHIBA_LAI__09 = 4.
+SECHIBA_LAI__10 = 2.
+SECHIBA_LAI__11 = 2.
+SECHIBA_LAI__12 = 2.
+SECHIBA_LAI__13 = 2.
+# default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2.
+# Height for all vegetation types (m)
+# If IMPOSE_VEG
+# The height used in the 0dim mode. The values should be found
+#  in the restart file. The new values of height will be computed anyway
+#  at the end of the current day. The need for this variable is caused
+#  by the fact that the model may stop during a day and thus we have not
+#  yet been through the routines which compute the new surface conditions.
+SLOWPROC_HEIGHT__01 = 0.
+SLOWPROC_HEIGHT__02 = 50.
+SLOWPROC_HEIGHT__03 = 50.
+SLOWPROC_HEIGHT__04 = 30.
+SLOWPROC_HEIGHT__05 = 30.
+SLOWPROC_HEIGHT__06 = 30.
+SLOWPROC_HEIGHT__07 = 20.
+SLOWPROC_HEIGHT__08 = 20.
+SLOWPROC_HEIGHT__09 = 20.
+SLOWPROC_HEIGHT__10 = .2
+SLOWPROC_HEIGHT__11 = .2
+SLOWPROC_HEIGHT__12 = .4
+SLOWPROC_HEIGHT__13 = .4
+# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0
+# Fraction of the 3 soil types (0-dim mode)
+# If IMPOSE_VEG
+# Determines the fraction for the 3 soil types
+#  in the mesh in the following order : sand loam and clay.
+SOIL_FRACTIONS__01 = 0.28
+SOIL_FRACTIONS__02 = 0.52
+SOIL_FRACTIONS__03 = 0.20
+# default = 0.28, 0.52, 0.20
+# Temperature used for the initial guess of LAI
+# If there is no LAI in the restart file, we may need
+#  a temperature that is used to guess the initial LAI.
+SLOWPROC_LAI_TEMPDIAG = 280.
+# default = 280.
+# Soil level (m) used for canopy development
+# If STOMATE is not activated.
+# The temperature at this soil depth is used to determine the LAI when
+#   STOMATE is not activated.
+SECHIBA_ZCANOP = 0.5
+# default = 0.5
+# Fraction of other surface types within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of ice, lakes, etc. is read from the restart file. If
+#  it is not found there we will use the values provided here.
+#  For the moment, there is only ice.
+SECHIBA_FRAC_NOBIO = 0.0
+# default = 0.0
+# Fraction of the clay fraction (0-dim mode)
+# If IMPOSE_VEG
+# Determines the fraction of clay in the grid box.
+CLAY_FRACTION = 0.2
+# default = 0.2
+# Should the surface parameters be prescribed
+# This flag allows the user to impose the surface parameters
+#  (Albedo Roughness and Emissivity). It is espacially interesting for 0D
+#  simulations. On the globe it does not make too much sense as
+#  it imposes the same vegetation everywhere
+IMPOSE_AZE = n
+# default = n
+# Emissivity of the surface for LW radiation
+# If IMPOSE_AZE
+# The surface emissivity used for compution the LE emission
+#  of the surface in a 0-dim version. Values range between
+#  0.97 and 1.. The GCM uses 0.98.
+CONDVEG_EMIS = 1.0
+# default = 1.0
+# SW visible albedo for the surface
+# If IMPOSE_AZE
+# Surface albedo in visible wavelengths to be used
+#  on the point if a 0-dim version of SECHIBA is used.
+#  Look at the description of the forcing data for
+#  the correct value.
+CONDVEG_ALBVIS = 0.25
+# default = 0.25
+# SW near infrared albedo for the surface
+# If IMPOSE_AZE
+# Surface albedo in near infrared wavelengths to be used
+#  on the point if a 0-dim version of SECHIBA is used.
+#  Look at the description of the forcing data for
+#  the correct value.
+CONDVEG_ALBNIR = 0.25
+# default = 0.25
+# Average method for z0
+# If this flag is set to true (y) then the neutral Cdrag
+#  is averaged instead of the log(z0). This should be
+#  the prefered option. We still wish to keep the other
+#  option so we can come back if needed. If this is
+#  desired then one should set Z0CDRAG_AVE = n
+Z0CDRAG_AVE = y
+# default = y
+# Surface roughness (m)
+# If IMPOSE_AZE
+# Surface rougness to be used on the point if a 0-dim version
+#  of SECHIBA is used. Look at the description of the forcing
+#  data for the correct value.
+CONDVEG_Z0 = 0.15
+# default = 0.15_stnd
+# Height to be added to the height of the first level (m)
+# If IMPOSE_AZE
+# ORCHIDEE assumes that the atmospheric level height is counted
+#  from the zero wind level. Thus to take into account the roughness
+#  of tall vegetation we need to correct this by a certain fraction
+#  of the vegetation height. This is called the roughness height in
+#  ORCHIDEE talk.
+ROUGHHEIGHT = 0.0
+# default = 0.0
+# The snow albedo used by SECHIBA
+# This option allows the user to impose a snow albedo.
+#  Default behaviour is to use the model of snow albedo
+#  developed by Chalita (1993).
+CONDVEG_SNOWA = default
+# default = use the model of snow albedo developed by Chalita
+# Switch bare soil albedo dependent (if TRUE) on soil wetness
+# If TRUE, the model for bare soil albedo is the old formulation.
+#  Then it depend on the soil dry or wetness. If FALSE, it is the
+#  new computation that is taken, it is only function of soil color.
+STOMATE_OK_CO2=TRUE
+# STOMATE_OK_STOMATE is not set
+# STOMATE_OK_DGVM is not set
+# STOMATE_WATCHOUT is not set
+SECHIBA_restart_in=_start_sech_
+SECHIBA_rest_out=sechiba_rest.nc
+SECHIBA_reset_time=y
+# SECHIBA_reset_time is not set
+OUTPUT_FILE=sechiba_out.nc
+WRITE_STEP=2592000
+SECHIBA_HISTLEVEL=5
+STOMATE_OUTPUT_FILE=stomate_history.nc
+STOMATE_HIST_DT=10.
+STOMATE_HISTLEVEL=0
+SECHIBA_DAY=0.0
+SECHIBA_ZCANOP=0.5
+DT_SLOW=86400.
+# IMPOSE_VEG is not set
+VEGETATION_FILE=carteveg5km.nc
+DIFFUCO_LEAFCI=233.
+CONDVEG_SNOWA=default
+# IMPOSE_AZE is not set
+SOILALB_FILE=soils_param.nc
+SOILTYPE_FILE=soils_param.nc
+ENERBIL_TSURF=280.
+HYDROL_SNOW=0.0
+HYDROL_SNOWAGE=0.0
+HYDROL_SNOWICE=0.0
+HYDROL_SNOWICEAGE=0.0
+HYDROL_HDRY=1.0
+HYDROL_HUMR=1.0
+HYDROL_BQSB=default
+HYDROL_GQSB=0.0
+HYDROL_DSG=0.0
+HYDROL_DSP=default
+HYDROL_QSV=0.0
+HYDROL_OK_HDIFF=n
+HYDROL_TAU_HDIFF=1800.
+THERMOSOIL_TPRO=280.
+RIVER_ROUTING=y
+ROUTING_FILE=routing.nc
+LAI_MAP=y
+LAI_FILE=lai2D.nc
+SECHIBA_QSINT=0.02
 ALB_BARE_MODEL = FALSE
+# default = FALSE
+# Initial snow mass if not found in restart
+# The initial value of snow mass if its value is not found
+#   in the restart file. This should only be used if the model is
+#   started without a restart file.
+HYDROL_SNOW = 0.0
+# default = 0.0
+# Initial snow age if not found in restart
+# The initial value of snow age if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+HYDROL_SNOWAGE = 0.0
+# default = 0.0
+# Initial snow amount on ice, lakes, etc. if not found in restart
+# The initial value of snow if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+HYDROL_SNOW_NOBIO = 0.0
+# default = 0.0
+# Initial snow age on ice, lakes, etc. if not found in restart
+# The initial value of snow age if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+HYDROL_SNOW_NOBIO_AGE = 0.0
+# default = 0.0
+# Initial dry soil height if not found in restart for ORCHIDEE_1.3 to 1.5 Tags only.
+# The initial value of dry soil height if its value is not found
+# in the restart file. This should only be used if the model is
+# started without a restart file.
+HYDROL_HDRY = 0.0
+# default = 0.0
+# Initial soil moisture stress if not found in restart
+# The initial value of soil moisture stress if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+HYDROL_HUMR = 1.0
+# default = 1.0
+# Total depth of soil reservoir
+HYDROL_SOIL_DEPTH = 2.
+# default = 2.
+# Initial restart deep soil moisture if not found in restart
+# The initial value of deep soil moisture if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file. Default behaviour is a saturated soil.
+HYDROL_BQSB = default
+# default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2
+# Initial upper soil moisture if not found in restart
+# The initial value of upper soil moisture if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+HYDROL_GQSB = 0.0
+# default = 0.0
+# Initial upper reservoir depth if not found in restart
+# The initial value of upper reservoir depth if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+HYDROL_DSG = 0.0
+# default = 0.0
+# Initial dry soil above upper reservoir if not found in restart
+# The initial value of dry soil above upper reservoir if its value
+#  in the restart file. This should only be used if the model is
+#  started without a restart file. The default behaviour
+#  is to compute it from the variables above. Should be OK most of
+#  the time.
+HYDROL_DSP = default
+# default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0
+# Initial water on canopy if not found in restart
+# The initial value of moisture on canopy if its value
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+HYDROL_QSV = 0.0
+# default = 0.0
+# Soil moisture on each soil tile and levels
+# The initial value of mc if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+HYDROL_MOISTURE_CONTENT = 0.3
+# default = 0.3
+# US_NVM_NSTM_NSLM
+# The initial value of us (relative moisture) if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+US_INIT = 0.0
+# default = 0.0
+# Coefficient for free drainage at bottom
+# The initial value of free drainage if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+FREE_DRAIN_COEF = 1.0, 1.0, 1.0
+# default = 1.0, 1.0, 1.0
+# Bare soil evap on each soil if not found in restart
+# The initial value of bare soils evap if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+EVAPNU_SOIL = 0.0
+# default = 0.0
+# Initial temperature if not found in restart
+# The initial value of surface temperature if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+ENERBIL_TSURF = 280.
+# default = 280.
+# Initial Soil Potential Evaporation
+# The initial value of soil potential evaporation if its value
+#  is not found in the restart file. This should only be used if
+#  the model is started without a restart file.
+ENERBIL_EVAPOT = 0.0
+# default = 0.0
+# Initial soil temperature profile if not found in restart
+# The initial value of the temperature profile in the soil if
+#   its value is not found in the restart file. This should only
+#   be used if the model is started without a restart file. Here
+#   we only require one value as we will assume a constant
+#   throughout the column.
+THERMOSOIL_TPRO = 280.
+# default = 280.
+# Initial leaf CO2 level if not found in restart
+# The initial value of leaf_ci if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+DIFFUCO_LEAFCI = 233.
+# default = 233.
+# Keep cdrag coefficient from gcm.
+# Set to .TRUE. if you want q_cdrag coming from GCM.
+#  Keep cdrag coefficient from gcm for latent and sensible heat fluxes.
+#  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs).
+PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30.
+RVEG_PFT = .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5
 CDRAG_FROM_GCM = .TRUE.
-# default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE.
-# Artificial parameter to increase or decrease canopy resistance
-# Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin
-# By PFT.
-RVEG_PFT = .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5
-# default = 1.
-# Interception reservoir coefficient for ORCHIDEE_1.3 to 1.5 Tags only.
-# Transforms leaf area index into size of interception reservoir
-#  for slowproc_derivvar or stomate.
-SECHIBA_QSINT = 0.02
-# default = 0.1
-#**************************************************************************
-# LAI
-#**************************************************************************
-# Read the LAI map
-# It is possible to read a 12 month LAI map which will
-#  then be interpolated to daily values as needed.
-#  If n => type_of_lai (constant_veg.f90)
-#     - mean    : lai(ji,jv) = undemi * (llaimax(jv) + llaimin(jv))
-#     - inter   : llaimin(jv) + tempfunc(stempdiag(ji,lcanop)) * (llaimax(jv) - llaimin(jv))
-LAI_MAP = y
-# default = n
-# Name of file from which the vegetation map is to be read
-# If LAI_MAP
-# The name of the file to be opened to read the LAI
-#  map is to be given here. Usualy SECHIBA runs with a 5kmx5km
-#  map which is derived from a Nicolas VIOVY one.
-LAI_FILE = lai2D.nc
-# default = ../surfmap/lai2D.nc
-# Flag to use old "interpolation" of LAI
-# If LAI_MAP
-# If you want to recover the old (ie orchidee_1_2 branch)
-# "interpolation" of LAI map.
-SLOWPROC_LAI_OLD_INTERPOL = n
-# default = n
-#**************************************************************************
-# LAND_USE
-#**************************************************************************
-# Read a land_use vegetation map
-# pft values are needed, max time axis is 293
-LAND_USE = n
-# default = n
-# Year of the land_use vegetation map readed
-# year off the pft map
-# If LAND_USE
-VEGET_YEAR = 282
-# default = 282
-# Update vegetation frequency
-# The veget datas will be update each this time step.
-# If LAND_USE
-VEGET_LENGTH = 1Y
-# default = 1Y
-# treat land use modifications
-# With this variable, you can use a Land Use map
-# to simulate anthropic modifications such as
-# deforestation.
-# If LAND_USE
-LAND_COVER_CHANGE = n
-# default = n
-#**************************************************************************
-# agriculture allowed?
-# With this variable, you can determine
-#  whether agriculture is allowed
-AGRICULTURE = y
-# default = y
-# herbivores allowed?
-# With this variable, you can activate herbivores
-HERBIVORES = n
-# default = n
-# treat expansion of PFTs across a grid cell?
-# With this variable, you can determine
-#  whether we treat expansion of PFTs across a
-#  grid cell.
-TREAT_EXPANSION = n
-# default = n
-#**************************************************************************
-# Time within the day simulated
-# This is the time spent simulating the current day. This variable is
-#  prognostic as it will trigger all the computations which are
-#  only done once a day.
-SECHIBA_DAY = 0.0
-# default = 0.0
-# Time step of STOMATE and other slow processes
-# Time step (s) of regular update of vegetation
-#  cover, LAI etc. This is also the time step
-#  of STOMATE.
-DT_SLOW = 86400.
-# default = un_jour = 86400.
-#**************************************************************************
-# Allows to switch on the multilayer hydrology of CWRR
-# This flag allows the user to decide if the vertical
-#  hydrology should be treated using the multi-layer
-#  diffusion scheme adapted from CWRR by Patricia de Rosnay.
-#  by default the Choisnel hydrology is used.
-HYDROL_CWRR = n
-# default = n
-# do horizontal diffusion?
-# If TRUE, then water can diffuse horizontally between
-#  the PFTs' water reservoirs.
-HYDROL_OK_HDIFF = n
-# default = n
-# time scale (s) for horizontal diffusion of water
-# If HYDROL_OK_HDIFF
-# Defines how fast diffusion occurs horizontally between
-#  the individual PFTs' water reservoirs. If infinite, no
-#  diffusion.
-HYDROL_TAU_HDIFF = 86400.
-# default = 86400.
-# Percent of precip that is not intercepted by the canopy (only for TAG 1.6).
-# During one rainfall event, PERCENT_THROUGHFALL% of the incident rainfall
-#  will get directly to the ground without being intercepted.
-PERCENT_THROUGHFALL = 30.
-# default = 30.
-# Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8).
-# During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall
-#  will get directly to the ground without being intercepted, for each PFT..
-PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30.
-# default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30.
-# Decides if we route the water or not
-# This flag allows the user to decide if the runoff
-#  and drainage should be routed to the ocean
-#  and to downstream grid boxes.
-RIVER_ROUTING = y
-# default = n
-# Name of file which contains the routing information
-# The file provided here should allow the routing module to
-#  read the high resolution grid of basins and the flow direction
-#  from one mesh to the other.
-ROUTING_FILE = routing.nc
-# default = routing.nc
-# Time step of th routing scheme
-# If RIVER_ROUTING
-# This values gives the time step in seconds of the routing scheme.
-#   It should be multiple of the main time step of ORCHIDEE. One day
-#   is a good value.
-ROUTING_TIMESTEP = 86400
-# default = 86400
-# Number of rivers
-# If RIVER_ROUTING
-# This parameter chooses the number of largest river basins
-#  which should be treated as independently as rivers and not
-#  flow into the oceans as diffusion coastal flow.
-ROUTING_RIVERS = 50
-# default = 50
-# Should we compute an irrigation flux
-# This parameters allows the user to ask the model
-#  to compute an irigation flux. This performed for the
-#  on very simple hypothesis. The idea is to have a good
-#  map of irrigated areas and a simple function which estimates
-#  the need to irrigate.
-DO_IRRIGATION = n
-# default = n
-# Name of file which contains the map of irrigated areas
-# If IRRIGATE
-# The name of the file to be opened to read the field
-#  with the area in m^2 of the area irrigated within each
-#  0.5 0.5 deg grid box. The map currently used is the one
-#  developed by the Center for Environmental Systems Research
-#  in Kassel (1995).
-IRRIGATION_FILE = irrigated.nc
-# default = irrigated.nc
-# Should we include floodplains
-# This parameters allows the user to ask the model
-#  to take into account the flood plains and return
-#  the water into the soil moisture. It then can go
-#  back to the atmopshere. This tried to simulate
-#  internal deltas of rivers.
-DO_FLOODPLAINS = n
-# default = n
-#**************************************************************************

CONFIG/trunk/IPSLCM4_v2/EXP00/config.card

r90	r126
32	32	#D- For each component, Name of component, Tag of component
33	33	ATM= (lmdz, LMDZ.4)
34		SRF= (orchidee, ORCHIDEE.1.3)
	34	SRF= (orchidee, ORCHIDEE.1.9)
35	35	OCE= (opa, OPA8.2)
36	36	ICE= (lim, LIM.1)

Note: See TracChangeset for help on using the changeset viewer.

Context Navigation

Changeset 126 for CONFIG

Legend:

CONFIG/trunk/IPSLCM4_v2/EXP00/PARAM/orchidee.def

CONFIG/trunk/IPSLCM4_v2/EXP00/config.card

Download in other formats: