Changeset 1643

Timestamp:

01/31/12 13:06:36 (13 years ago)

Author:

jgipsl

Message:

• Added all cards needed to run a forced LMDZOR amip experience in IPSLCM5_v4 configuration.
• Added file guide.def. By defalut ok_guide=n, no nudging. To activate nudging, set ok_guide=y in lmdz.card
• in lmdz.driver, changed test to know if create_etat0_limit execution is needed

Location:

CONFIG/IPSLCM/IPSLCM5_v4

Files:

• GENERAL/DRIVER/lmdz.driver (modified) (5 diffs)
• GENERAL/PARAM/guide.def (added)
• USER_SPEC/LMDZOR (added)
• USER_SPEC/LMDZOR/amip (added)
• USER_SPEC/LMDZOR/amip/COMP (added)
• USER_SPEC/LMDZOR/amip/COMP/lmdz.card (copied) (copied from CONFIG/LMDZOR/branches/LMDZOR_v4/LMDZOR/COMP/lmdz.card_AMIP) (5 diffs)
• USER_SPEC/LMDZOR/amip/COMP/orchidee.card (copied) (copied from CONFIG/LMDZOR/branches/LMDZOR_v4/LMDZOR/COMP/orchidee.card_AMIP)
• USER_SPEC/LMDZOR/amip/COMP/stomate.card (copied) (copied from CONFIG/LMDZOR/branches/LMDZOR_v4/LMDZOR/COMP/stomate.card)
• USER_SPEC/LMDZOR/amip/config.card (copied) (copied from CONFIG/LMDZOR/branches/LMDZOR_v4/LMDZOR/config.card) (2 diffs)

CONFIG/IPSLCM/IPSLCM5_v4/GENERAL/DRIVER/lmdz.driver

@@ -36 +36 @@
     esac
 
-        
     ##- LMDZ physics version
     ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics) 
@@ -45 +44 @@
     fi
     echo LMDZ physics version : ${LMDZ_Physics}
+
+    ##- Create_etat0_limit version
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices CREATE
+    CREATE=${lmdz_UserChoices_CREATE}
+    echo create_etat0_limit version : ${CREATE}
 
     ## - LMDZ choice of config.def file
@@ -313 +317 @@
     LMDZ_sed run.def adjust   ${LMDZ_adjust}
 
+
+    # guide.def : Activate nudging if ok_guide set in lmdz.card
+    if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then
+        LMDZ_sed guide.def ok_guide  ${lmdz_UserChoices_ok_guide}
+    fi
+
     ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
     IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta
@@ -342 +352 @@
 
     if ( ${FirstInitialize} ) ; then
-
-        if ( [ "${config_Restarts_OverRule}" = "n" ] && [ "${config_ATM_Restart}" = "n" ] ); then
+        if [ -f start.nc ] && [ -f startphy.nc ] ; then
+            # The restart files already exist. They have been copied from a previous run or from a CREATE job
+            echo "Restart files for LMDZ have been copied from a previous run"
+        else
+            # Restart files have to be created
+            echo "Run create_etat0_limit.e to create restart files start.nc and startphy.nc for LMDZ"
             if [ ${DRYRUN} -le 2 ] ; then
                 ##-- suppression of ozone file construction --
-                cp config.def config.def.save
-                LMDZ_sed config.def read_climoz 0
+                cp config.def config.def.save
+                LMDZ_sed config.def read_climoz 0
                 IGCM_sys_Cp ${R_EXE}/create_etat0_limit.e ${RUN_DIR}/.
                 if [ ${DRYRUN} -le 1 ] ; then
                     ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e
-                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
-                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
+                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
+                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
                 fi
-                IGCM_sys_Mv config.def.save config.def
+                IGCM_sys_Mv config.def.save config.def
             else
                 echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated"
@@ -360 +374 @@
             fi
         fi
-
     fi
 

CONFIG/IPSLCM/IPSLCM5_v4/USER_SPEC/LMDZOR/amip/COMP/lmdz.card

@@ -21 +21 @@
 # LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3
 
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=annuel
+
+# Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used.
+# OutLevel=low/medium/high
+OutLevel=low
+
 # Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n
 LMDZ_COSP_OK=n
@@ -32 +41 @@
 LMDZ_NMC_hf=n
 
-# Other specific parameters to this experience 
-aer_type=annuel
-pmagic=0.0
-
 # Nugding : ok_guide=y/n
 ok_guide=n
@@ -44 +49 @@
 
 [BoundaryFiles]
-List= (${R_OUT}/${config_UserChoices_TagName}/${CREATE}/ATM/Output/Boundary/${CREATE}_${year}_limit.nc,       limit.nc)
+List=()
+#List=
 #      (/dmnfs/cont003/p86ghatt/IGCM_OUT/LMDZOR/NUDGING-CORDEX-AFR/${year}${month}/u.nc, u.nc),\
 #      (/dmnfs/cont003/p86ghatt/IGCM_OUT/LMDZOR/NUDGING-CORDEX-AFR/${year}${month}/v.nc, v.nc)
@@ -61 +67 @@
 # With AR5 aerosols (including ASSO4M(=SO4), CSSO4M, AIBCM, ASBCM, AIPOMM, ASPOMM, ASSSM, CSSSM, SSSSM, CIDUSTM)
 # With AR5 ozone(tropo + strato from LMDZOR-INCA-REPROBUS simulations)
-List=   (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_${year}_v3.nc, aerosols${year}.nc, 1:12:), \
+List=   (${R_OUT}/${config_UserChoices_TagName}/${CREATE}/ATM/Output/Boundary/${CREATE}_${year}_limit.nc,          limit.nc,           1:12:),\
+        (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_${year}_v3.nc, aerosols${year}.nc, 1:12:), \
         (${R_OUT}/${config_UserChoices_TagName}/${CREATE}/ATM/Output/Boundary/${CREATE}_${year}_climoz_LMDZ.nc,    climoz_LMDZ.nc,     1:12:)
 
@@ -69 +76 @@
         (${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),    \
         (${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),    \
+        (${SUBMIT_DIR}/PARAM/output.def_${OutLevel},  output.def),    \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),    \
         (${SUBMIT_DIR}/PARAM/guide.def, .), \
         (${SUBMIT_DIR}/PARAM/run.def, .), \

CONFIG/IPSLCM/IPSLCM5_v4/USER_SPEC/LMDZOR/amip/config.card

@@ -12 +12 @@
 JobName=LMDZOR01
 #----- Short Name of Experiment
-ExperimentName=CLIM
+ExperimentName=amip
 #----- DEVT TEST PROD
-SpaceName=PROD
-LongName="LMDZ4OR configuration using the SVN trunk of LMDZ4"
+SpaceName=TEST
+LongName="LMDZOR configuration"
 TagName=LMDZOR
+UserSpec=LMDZOR/amip
 #============================
 #-- leap, noleap, 360d
-CalendarType=360d
+CalendarType=leap
 #-- Begin and end of job 
 #-- "YYYY-MM-DD"
 DateBegin=1980-01-01
-DateEnd=1980-12-30
+DateEnd=1980-01-31
 #============================
 #-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation
@@ -33 +34 @@
 #============================
 #-- Total Number of Processors
-JobNumProcTot=4
+JobNumProcTot=32
 #============================
 #-- Run Options