Changeset 2410


Ignore:
Timestamp:
02/04/15 18:40:38 (7 years ago)
Author:
jgipsl
Message:
  • clean in orchidee.def : only keep paramers not having default values
  • change to AUTOBLOCKER in run.def and orchidee.def to make it visible that these parameters can not be changed by the user
  • change some blocker variables to nonblocker in orchidee.driver
Location:
CONFIG/UNIFORM/v6
Files:
12 edited

Legend:

Unmodified
Added
Removed
  • CONFIG/UNIFORM/v6/IPSLCM6/GENERAL/DRIVER/orchidee.driver

    r2373 r2410  
    163163# Modify in orchidee.def VEGET_UPDATE and LAND_COVER_CHANGE if they are set in orchidee.card section UserChoices 
    164164    if [ ! X${orchidee_UserChoices_VEGET_UPDATE} = X ] ; then 
    165         IGCM_comp_modifyDefFile blocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE} 
    166     else 
    167         IGCM_comp_modifyDefFile blocker orchidee.def VEGET_UPDATE 0Y 
     165        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE} 
     166    else 
     167        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y 
    168168    fi 
    169169    if [ ! X${orchidee_UserChoices_LAND_COVER_CHANGE} = X ] ; then 
    170         IGCM_comp_modifyDefFile blocker orchidee.def LAND_COVER_CHANGE ${orchidee_UserChoices_LAND_COVER_CHANGE} 
    171     else 
    172         IGCM_comp_modifyDefFile blocker orchidee.def LAND_COVER_CHANGE n 
     170        IGCM_comp_modifyDefFile nonblocker orchidee.def LAND_COVER_CHANGE ${orchidee_UserChoices_LAND_COVER_CHANGE} 
     171    else 
     172        IGCM_comp_modifyDefFile nonblocker orchidee.def LAND_COVER_CHANGE n 
    173173    fi 
    174174 
  • CONFIG/UNIFORM/v6/IPSLCM6/GENERAL/PARAM/orchidee.def_CWRR

    r2343 r2410  
    11# 
    22#************************************************************************** 
    3 #                    Namelist for ORCHIDEE 
    4 #************************************************************************** 
    5 # 
    6 # 
    7 #************************************************************************** 
    8 #          OPTIONS NOT SET 
    9 #************************************************************************** 
    10 # 
    11 # 
    12 #************************************************************************** 
    13 #          Management of display in the run of ORCHIDEE 
     3#                    Parameter file list for ORCHIDEE 
    144#************************************************************************** 
    155 
    16 # Model chatting level 
    17 # level of online diagnostics in STOMATE (0-4) 
    18 # With this variable, you can determine how much online information STOMATE 
    19 #  gives during the run. 0 means virtually no info. 
    20 BAVARD = 1 
     6# Input and output 
     7#************************************************************************** 
     8# Restart the time from the GCM.  
     9# default = n 
     10SECHIBA_reset_time = y 
     11 
     12# Name of restart to read for initial conditions 
     13# default = NONE 
     14SECHIBA_restart_in = _AUTOBLOCKER_ 
     15 
     16# Name of restart to read for initial conditions of STOMATE 
     17# default = NONE 
     18STOMATE_RESTART_FILEIN = _AUTOBLOCKER_ 
     19 
     20# Use XIOS for writing diagnostics file 
     21# defulat = n 
     22XIOS_ORCHIDEE_OK = _AUTO_ 
     23 
     24# Flag to activate sechiba_out_2.nc history file for SECHIBA 
     25# default  = FALSE 
     26SECHIBA_HISTFILE2 = _AUTO_ 
     27 
     28# SECHIBA history output level (0..10) 
     29# default = 5 
     30SECHIBA_HISTLEVEL = _AUTO_ 
     31 
     32# SECHIBA history 2 output level (0..10) 
    2133# default = 1 
     34SECHIBA_HISTLEVEL2 = _AUTO_ 
    2235 
    23 # Flag for debug information 
    24 # This option allows to switch on the output of debug 
    25 #         information without recompiling the code. 
    26 DEBUG_INFO = n 
    27 #default = n 
     36# STOMATE history output level (0..10) 
     37# default = 10 
     38STOMATE_HISTLEVEL = _AUTO_ 
    2839 
    29 # ORCHIDEE will print more messages 
    30 # This flag permits to print more debug messages in the run. 
    31 LONGPRINT = n 
    32 #default = n 
     40# Writefrequency in seconds in sechiba_history.nc 
     41# default = 86400.0 
     42WRITE_STEP = _AUTO_ 
    3343 
    34 #--------------------------------------------------------------------- 
     44# Writefrequency in seconds sechiba_out_2.nc  
     45# default = 1800.0 
     46WRITE_STEP2 = _AUTO_ 
    3547 
    36 # To reset the time coming from SECHIBA restart file 
    37 # This option allows the model to override the time 
    38 #  found in the restart file of SECHIBA with the time 
    39 #  of the first call. That is the restart time of the GCM. 
    40 SECHIBA_reset_time = y 
     48# Writefrequency in days in stomate_history.nc 
     49# default = 10. 
     50STOMATE_HIST_DT = _AUTO_ 
     51 
     52# Writefrequency in days or -1 for monthly output in stomate_ipcc_history.nc 
     53# default = 0. 
     54STOMATE_IPCC_HIST_DT = -1 
     55 
     56 
     57# Hydrology parameters 
     58#************************************************************************** 
     59# Activate the multi-layer diffusion scheme adapted from CWRR 
     60# by default the Choisnel hydrology is used. 
    4161# default = n 
     62HYDROL_CWRR = y 
     63 
     64# Total depth of soil reservoir 
     65# default = 2./4. depending on HYDROL_CWRR 
     66HYDROL_SOIL_DEPTH = 2. 
     67 
     68# Root profile 
     69HYDROL_HUMCSTE = 5.0, 0.8, 0.8, 1.0, 0.8, 0.8, 1.0, 1.0, 0.8, 4.0, 4.0, 4.0, 4.0  
     70 
     71# Activate river routing 
     72# default = n 
     73RIVER_ROUTING = y 
     74 
    4275 
    4376#************************************************************************** 
    44 #          Files : incoming / forcing / restart /output 
    45 #************************************************************************** 
    46 # Ancillary files : 
    47 #--------------------------------------------------------------------- 
     77# Activate Stomate component 
     78# default = n 
     79STOMATE_OK_STOMATE = _AUTOBLOCKER_  
    4880 
    49 # Name of file from which the vegetation map is to be read 
    50 # If !IMPOSE_VEG 
    51 # If LAND_USE  
    52 #   default = pft_new.nc 
    53 #   The name of the file to be opened to read a vegetation 
    54 #   map (in pft) is to be given here.  
    55 # If !LAND_USE 
    56 #   default = ../surfmap/carteveg5km.nc 
    57 #   The name of the file to be opened to read the vegetation 
    58 #   map is to be given here. Usualy SECHIBA runs with a 5kmx5km 
    59 #   map which is derived from the IGBP one. We assume that we have 
    60 #   a classification in 87 types. This is Olson modified by Viovy. 
    61 VEGETATION_FILE = PFTmap.nc 
     81# Activate calculations of CO2 according to Farqhuar and Ball 
     82# default = n 
     83STOMATE_OK_CO2 = y 
    6284 
    63  
    64 # Name of file from which the bare soil albedo 
    65 # If !IMPOSE_AZE 
    66 # The name of the file to be opened to read the soil types from  
    67 #  which we derive then the bare soil albedos. This file is 1x1  
    68 #  deg and based on the soil colors defined by Wilson and Henderson-Seller. 
    69 SOILALB_FILE = soils_param.nc 
    70 # default = ../surfmap/soils_param.nc 
    71  
    72 # Name of file from which soil types are read 
    73 # If !IMPOSE_VEG 
    74 # The name of the file to be opened to read the soil types.  
    75 #  The data from this file is then interpolated to the grid of 
    76 #  of the model. The aim is to get fractions for sand loam and 
    77 #  clay in each grid box. This information is used for soil hydrology 
    78 #  and respiration. 
    79 #  This parameter change name in newer ORCHIDEE versions; SOILTYPE_FILE=>SOILCLASS_FILE 
    80 SOILTYPE_FILE = soils_param.nc 
    81 SOILCLASS_FILE= soils_param.nc 
    82 # default = ../surfmap/soils_param.nc 
    83  
    84 # Name of file from which the reference 
    85 # The name of the file to be opened to read 
    86 #  temperature is read 
    87 #  the reference surface temperature. 
    88 #  The data from this file is then interpolated 
    89 #  to the grid of the model. 
    90 #  The aim is to get a reference temperature either 
    91 #  to initialize the corresponding prognostic model 
    92 #  variable correctly (ok_dgvm = TRUE) or to impose it 
    93 #  as boundary condition (ok_dgvm = FALSE) 
    94 REFTEMP_FILE = reftemp.nc 
    95 # default = reftemp.nc 
    96  
    97 # Name of file containg information about topography. 
    98 TOPOGRAPHY_FILE =cartepente2d_15min.nc 
    99  
    100 # Input and output restart file for SECHIBA : 
    101 #--------------------------------------------------------------------- 
    102  
    103 # Name of restart to READ for initial conditions 
    104 # This is the name of the file which will be opened 
    105 #  to extract the initial values of all prognostic 
    106 #  values of the model. This has to be a netCDF file. 
    107 #  Not truly COADS compliant. NONE will mean that 
    108 #  no restart file is to be expected. 
    109 SECHIBA_restart_in = _AUTO_ 
    110 # default = NONE 
    111  
    112 # Name of restart files to be created by SECHIBA 
    113 # This variable give the name for the restart files.  
    114 #  The restart software within IOIPSL will add .nc if needed. 
    115 SECHIBA_rest_out = sechiba_rest_out.nc 
    116 # default = sechiba_rest_out.nc 
    117  
    118 # Input and output restart file for STOMATE : 
    119 #--------------------------------------------------------------------- 
    120  
    121 # Name of restart to READ for initial conditions of STOMATE 
    122 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    123 # This is the name of the file which will be opened of STOMATE 
    124 #   to extract the initial values of all prognostic values of STOMATE. 
    125 STOMATE_RESTART_FILEIN = _AUTO_ 
    126 # default = NONE 
    127  
    128 # Name of restart files to be created by STOMATE 
    129 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    130 # This is the name of the file which will be opened 
    131 #        to write the final values of all prognostic values 
    132 #        of STOMATE. 
    133 STOMATE_RESTART_FILEOUT = stomate_rest_out.nc 
    134 # default = stomate_restart.nc 
    135  
    136 # Forcing files for TESTSTOMATE and FORCESOIL 
    137 #--------------------------------------------------------------------- 
    138  
    139 # Name of STOMATE's forcing file 
    140 # Name that will be given to STOMATE's offline forcing file 
    141 #STOMATE_FORCING_NAME = stomate_forcing.nc 
    142 #default = NONE 
    143  
    144 # Size of STOMATE forcing data in memory (MB) 
    145 # This variable determines how many 
    146 #  forcing states will be kept in memory. 
    147 #  Must be a compromise between memory 
    148 #  use and frequeny of disk access. 
    149 STOMATE_FORCING_MEMSIZE = 50 
    150 # default = 50 
    151  
    152 # Name of STOMATE's carbon forcing file 
    153 # Name that will be given to STOMATE's carbon offline forcing file 
    154 #STOMATE_CFORCING_NAME = stomate_Cforcing.nc 
    155 # default = NONE 
    156  
    157  
    158 # Produced forcing file name (SECHIBA puis STOMATE) : 
    159 #--------------------------------------------------------------------- 
    160  
    161 # ORCHIDEE will write out its forcing to a file 
    162 # This flag allows to write to a file all the variables 
    163 #  which are used to force the land-surface. The file  
    164 #  has exactly the same format than a normal off-line forcing 
    165 #  and thus this forcing can be used for forcing ORCHIDEE. 
    166 #ORCHIDEE_WATCHOUT = y 
    167 # default = n 
    168  
    169 # Filenane for the ORCHIDEE forcing file 
    170 # If ORCHIDEE_WATCHOUT 
    171 # This is the name of the file in which the 
    172 #  forcing used here will be written for later use.  
    173 WATCHOUT_FILE = orchidee_watchout.nc 
    174 # default = orchidee_watchout.nc 
    175  
    176 # ORCHIDEE will write out with this frequency 
    177 # If ORCHIDEE_WATCHOUT 
    178 # This flag indicates the frequency of the write of the variables.  
    179 DT_WATCHOUT = 1800 
    180 # default = dt 
    181  
    182 # STOMATE does minimum service 
    183 # set to TRUE if you want STOMATE to read 
    184 #  and write its start files and keep track 
    185 #  of longer-term biometeorological variables. 
    186 #  This is useful if OK_STOMATE is not set, 
    187 #  but if you intend to activate STOMATE later. 
    188 #  In that case, this run can serve as a  
    189 #  spinup for longer-term biometeorological 
    190 #  variables. 
    191 #STOMATE_WATCHOUT = y 
    192 # default = n 
    193  
    194 # Output file name (SECHIBA and STOMATE) : 
    195 #--------------------------------------------------------------------- 
    196 # Name of file in which the output is going 
    197 # This file is going to be created by the model 
    198 #  to be written 
    199 #  and will contain the output from the model. 
    200 #  This file is a truly COADS compliant netCDF file. 
    201 #  It will be generated by the hist software from 
    202 #  the IOIPSL package. 
    203 OUTPUT_FILE = sechiba_history.nc 
    204 # default = cabauw_out.nc 
    205  
    206 # Flag to switch on histfile 2 for SECHIBA (hi-frequency ?) 
    207 # This Flag switch on the second SECHIBA writing for hi (or low)  
    208 #  frequency writing. This second output is optional and not written 
    209 #  by default. 
    210 SECHIBA_HISTFILE2 = _AUTO_ 
    211 # default  = FALSE 
    212  
    213 # Name of file in which the output number 2 is going 
    214 #   to be written 
    215 # If SECHIBA_HISTFILE2 
    216 # This file is going to be created by the model 
    217 #   and will contain the output 2 from the model. 
    218 SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc 
    219 # default  = sechiba_out_2.nc 
    220  
    221 # Name of file in which STOMATE's output is going to be written 
    222 # This file is going to be created by the model 
    223 #  and will contain the output from the model. 
    224 #  This file is a truly COADS compliant netCDF file. 
    225 #  It will be generated by the hist software from 
    226 #  the IOIPSL package. 
    227 STOMATE_OUTPUT_FILE = stomate_history.nc 
    228 # default = stomate_history.nc 
    229  
    230 # Write levels for outputs files (number of variables) : 
    231 #--------------------------------------------------------------------- 
    232  
    233 # SECHIBA history output level (0..10) 
    234 # Chooses the list of variables in the history file.  
    235 #  Values between 0: nothing is written; 10: everything is  
    236 #  written are available More details can be found on the web under documentation. 
    237 #  web under documentation. 
    238 SECHIBA_HISTLEVEL = _AUTO_ 
    239 # default = 5 
    240  
    241 # SECHIBA history 2 output level (0..10) 
    242 # If SECHIBA_HISTFILE2 
    243 # Chooses the list of variables in the history file.  
    244 #   Values between 0: nothing is written; 10: everything is  
    245 #   written are available More details can be found on the web under documentation. 
    246 #   web under documentation. 
    247 # First level contains all ORCHIDEE outputs. 
    248 SECHIBA_HISTLEVEL2 = _AUTO_ 
    249 # default = 1 
    250  
    251 # STOMATE history output level (0..10) 
    252 #  0: nothing is written; 10: everything is written 
    253 STOMATE_HISTLEVEL = _AUTO_ 
    254 # default = 10 
    255  
    256 #-------------------------------------------------------------------- 
    257 # STOMATE_IPCC_OUTPUT_FILE 
    258 # This file is going to be created by the model 
    259 #    and will contain the output from the model. 
    260 #    This file is a truly COADS compliant netCDF file. 
    261 #    It will be generated by the hist software from 
    262 #    the IOIPSL package. 
    263 # Name of file in which STOMATE's output is going 
    264 # to be written 
    265 STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc 
    266 # default = stomate_ipcc_history.nc 
    267  
    268 # STOMATE_IPCC_HIST_DT 
    269 # Time step of the STOMATE IPCC history file 
    270 # STOMATE IPCC history time step (d) 
    271 STOMATE_IPCC_HIST_DT = -1 
    272 # default = 0. 
    273  
    274 # Write frequency for output files (SECHIBA in seconds et 
    275 # STOMATE in days) : 
    276 #--------------------------------------------------------------------- 
    277 # Frequency in seconds at which to WRITE output 
    278 # This variables gives the frequency the output of 
    279 #  the model should be written into the netCDF file. 
    280 #  It does not affect the frequency at which the 
    281 #  operations such as averaging are done. 
    282 WRITE_STEP = _AUTO_ 
    283 # default = 86400.0 
    284  
    285 # Frequency in seconds at which to WRITE output 
    286 # If SECHIBA_HISTFILE2 
    287 # This variables gives the frequency the output 2 of 
    288 #   the model should be written into the netCDF file. 
    289 #   It does not affect the frequency at which the 
    290 #   operations such as averaging are done. 
    291 #   That is IF the coding of the calls to histdef 
    292 #   are correct ! 
    293 WRITE_STEP2 = _AUTO_ 
    294 # default = 1800.0 
    295  
    296 # STOMATE history time step (d) 
    297 # Time step of the STOMATE history file 
    298 # Care : this variable must be higher than DT_SLOW 
    299 STOMATE_HIST_DT = _AUTO_ 
    300 # default = 10. 
    301  
    302 #--------------------------------------------------------------------- 
    303 # FORCESOIL CARBON spin up parametrization 
    304 #--------------------------------------------------------------------- 
    305  
    306 # Number of time steps per year for carbon spinup. 
    307 FORCESOIL_STEP_PER_YEAR = 12 
    308 # default = 12 
    309  
    310 # Number of years saved for carbon spinup. 
    311 FORCESOIL_NB_YEAR = 1 
    312 # default = 1 
    313  
    314 #--------------------------------------------------------------------- 
    315 # Parametrization : 
    316 #--------------------------------------------------------------------- 
    317  
    318 # Activate STOMATE? 
    319 # set to TRUE if STOMATE is to be activated 
    320 # STOMATE_OK_STOMATE will be set to y or n by orchidee.driver depending on activation of stomate component SBG in config.card 
    321 STOMATE_OK_STOMATE = _AUTO_  
    322 # default = n 
    323  
    324 # Activate DGVM? 
    325 # set to TRUE if Dynamic Vegetation DGVM is to be activated 
    326 STOMATE_OK_DGVM = n 
    327 # default = n 
    328  
    329 # Activate CO2? 
    330 # set to TRUE if photosynthesis is to be activated 
    331 STOMATE_OK_CO2 = y 
    332 # default = n 
    333  
    334 # Flag to force the value of atmospheric CO2 for vegetation. 
    335 # If this flag is set to true, the ATM_CO2 parameter is used 
    336 #  to prescribe the atmospheric CO2. 
    337 # This Flag is only use in couple mode. 
    338 FORCE_CO2_VEG = FALSE 
    339 # default = FALSE 
    340  
    341 # Value for atm CO2. 
    342 # If FORCE_CO2_VEG (in not forced mode) 
    343 # Value to prescribe the atm CO2. 
    344 #  For pre-industrial simulations, the value is 286.2 . 
    345 #  348. for 1990 year. 
    346 ATM_CO2 = 350. 
    347 # default = 350. 
    348  
    349 # constant tree mortality 
    350 # If yes, then a constant mortality is applied to trees.  
    351 #  Otherwise, mortality is a function of the trees'  
    352 #  vigour (as in LPJ). 
    353 LPJ_GAP_CONST_MORT = y 
    354 # default = y 
    355  
    356 # no fire allowed 
    357 # With this variable, you can allow or not 
    358 #  the estimation of CO2 lost by fire 
    359 FIRE_DISABLE = n 
    360 # default = n 
    361  
    362 # Average method for z0 
    363 # If this flag is set to true (y) then the neutral Cdrag 
    364 #  is averaged instead of the log(z0). This should be 
    365 #  the prefered option. We still wish to keep the other 
    366 #  option so we can come back if needed. If this is 
    367 #  desired then one should set Z0CDRAG_AVE = n 
    368 Z0CDRAG_AVE = y 
    369 # default = y 
    370  
    371 # parameters describing the surface (vegetation + soil) : 
    372 #--------------------------------------------------------------------- 
    373 # 
    374 # Should the vegetation be prescribed 
    375 # This flag allows the user to impose a vegetation distribution 
    376 #  and its characterisitcs. It is espacially interesting for 0D 
    377 #  simulations. On the globe it does not make too much sense as 
    378 #  it imposes the same vegetation everywhere 
    379 IMPOSE_VEG = n 
    380 # default = n 
    381  
    382 # Flag to use old "interpolation" of vegetation map. 
    383 # IF NOT IMPOSE_VEG and NOT LAND_USE 
    384 #  If you want to recover the old (ie orchidee_1_2 branch)  
    385 #   "interpolation" of vegetation map. 
    386 SLOWPROC_VEGET_OLD_INTERPOL = n 
    387 # default = n 
    388  
    389 # Vegetation distribution within the mesh (0-dim mode) 
    390 # If IMPOSE_VEG 
    391 # The fraction of vegetation is read from the restart file. If 
    392 #  it is not found there we will use the values provided here. 
    393 SECHIBA_VEG__01 = 0.2 
    394 SECHIBA_VEG__02 = 0.0 
    395 SECHIBA_VEG__03 = 0.0 
    396 SECHIBA_VEG__04 = 0.0 
    397 SECHIBA_VEG__05 = 0.0 
    398 SECHIBA_VEG__06 = 0.0 
    399 SECHIBA_VEG__07 = 0.0 
    400 SECHIBA_VEG__08 = 0.0 
    401 SECHIBA_VEG__09 = 0.0 
    402 SECHIBA_VEG__10 = 0.8 
    403 SECHIBA_VEG__11 = 0.0 
    404 SECHIBA_VEG__12 = 0.0 
    405 SECHIBA_VEG__13 = 0.0 
    406 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    407  
    408 # Maximum vegetation distribution within the mesh (0-dim mode) 
    409 # If IMPOSE_VEG 
    410 # The fraction of vegetation is read from the restart file. If 
    411 #  it is not found there we will use the values provided here. 
    412 SECHIBA_VEGMAX__01 = 0.2 
    413 SECHIBA_VEGMAX__02 = 0.0 
    414 SECHIBA_VEGMAX__03 = 0.0 
    415 SECHIBA_VEGMAX__04 = 0.0 
    416 SECHIBA_VEGMAX__05 = 0.0 
    417 SECHIBA_VEGMAX__06 = 0.0 
    418 SECHIBA_VEGMAX__07 = 0.0 
    419 SECHIBA_VEGMAX__08 = 0.0 
    420 SECHIBA_VEGMAX__09 = 0.0 
    421 SECHIBA_VEGMAX__10 = 0.8 
    422 SECHIBA_VEGMAX__11 = 0.0 
    423 SECHIBA_VEGMAX__12 = 0.0 
    424 SECHIBA_VEGMAX__13 = 0.0 
    425 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    426  
    427 # LAI for all vegetation types (0-dim mode) 
    428 # If IMPOSE_VEG 
    429 # The maximum LAI used in the 0dim mode. The values should be found 
    430 #  in the restart file. The new values of LAI will be computed anyway 
    431 #  at the end of the current day. The need for this variable is caused 
    432 #  by the fact that the model may stop during a day and thus we have not 
    433 #  yet been through the routines which compute the new surface conditions. 
    434 SECHIBA_LAI__01 = 0. 
    435 SECHIBA_LAI__02 = 8. 
    436 SECHIBA_LAI__03 = 8. 
    437 SECHIBA_LAI__04 = 4. 
    438 SECHIBA_LAI__05 = 4.5 
    439 SECHIBA_LAI__06 = 4.5 
    440 SECHIBA_LAI__07 = 4. 
    441 SECHIBA_LAI__08 = 4.5 
    442 SECHIBA_LAI__09 = 4. 
    443 SECHIBA_LAI__10 = 2. 
    444 SECHIBA_LAI__11 = 2. 
    445 SECHIBA_LAI__12 = 2. 
    446 SECHIBA_LAI__13 = 2. 
    447 # default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2. 
    448  
    449 # Height for all vegetation types (m) 
    450 # If IMPOSE_VEG 
    451 # The height used in the 0dim mode. The values should be found 
    452 #  in the restart file. The new values of height will be computed anyway 
    453 #  at the end of the current day. The need for this variable is caused 
    454 #  by the fact that the model may stop during a day and thus we have not 
    455 #  yet been through the routines which compute the new surface conditions. 
     85# Prescribed height of vegetation 
     86# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    45687SLOWPROC_HEIGHT__01 = 0. 
    45788SLOWPROC_HEIGHT__02 = 50. 
     
    46798SLOWPROC_HEIGHT__12 = .4 
    46899SLOWPROC_HEIGHT__13 = .4 
    469 # default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    470100 
    471  
    472 # Fraction of the 3 soil types (0-dim mode) 
    473 # If IMPOSE_VEG 
    474 # Determines the fraction for the 3 soil types 
    475 #  in the mesh in the following order : sand loam and clay. 
    476 SOIL_FRACTIONS__01 = 0.28 
    477 SOIL_FRACTIONS__02 = 0.52 
    478 SOIL_FRACTIONS__03 = 0.20 
    479 # default = 0.28, 0.52, 0.20 
    480  
    481 # Fraction of other surface types within the mesh (0-dim mode) 
    482 # If IMPOSE_VEG 
    483 # The fraction of ice, lakes, etc. is read from the restart file. If 
    484 #  it is not found there we will use the values provided here. 
    485 #  For the moment, there is only ice. 
    486 SECHIBA_FRAC_NOBIO = 0.0 
    487 # default = 0.0 
    488  
    489 # Fraction of the clay fraction (0-dim mode) 
    490 # If IMPOSE_VEG 
    491 # Determines the fraction of clay in the grid box. 
    492 CLAY_FRACTION = 0.2 
    493 # default = 0.2 
    494  
    495 # Should the surface parameters be prescribed 
    496 # This flag allows the user to impose the surface parameters 
    497 #  (Albedo Roughness and Emissivity). It is espacially interesting for 0D 
    498 #  simulations. On the globe it does not make too much sense as 
    499 #  it imposes the same vegetation everywhere 
    500 IMPOSE_AZE = n 
    501 # default = n 
    502  
    503 # Emissivity of the surface for LW radiation 
    504 # If IMPOSE_AZE 
    505 # The surface emissivity used for compution the LE emission 
    506 #  of the surface in a 0-dim version. Values range between  
    507 #  0.97 and 1.. The GCM uses 0.98. 
    508 CONDVEG_EMIS = 1.0 
    509 # default = 1.0 
    510  
    511 # SW visible albedo for the surface 
    512 # If IMPOSE_AZE 
    513 # Surface albedo in visible wavelengths to be used  
    514 #  on the point if a 0-dim version of SECHIBA is used.  
    515 #  Look at the description of the forcing data for  
    516 #  the correct value. 
    517 CONDVEG_ALBVIS = 0.25 
    518 # default = 0.25 
    519  
    520 # SW near infrared albedo for the surface 
    521 # If IMPOSE_AZE 
    522 # Surface albedo in near infrared wavelengths to be used  
    523 #  on the point if a 0-dim version of SECHIBA is used.  
    524 #  Look at the description of the forcing data for  
    525 #  the correct value. 
    526 CONDVEG_ALBNIR = 0.25 
    527 # default = 0.25 
    528  
    529 # Surface roughness (m) 
    530 # If IMPOSE_AZE 
    531 # Surface rougness to be used on the point if a 0-dim version 
    532 #  of SECHIBA is used. Look at the description of the forcing   
    533 #  data for the correct value. 
    534 CONDVEG_Z0 = 0.15 
    535 # default = 0.15_stnd 
    536  
    537 # Height to be added to the height of the first level (m) 
    538 # If IMPOSE_AZE 
    539 # ORCHIDEE assumes that the atmospheric level height is counted 
    540 #  from the zero wind level. Thus to take into account the roughness 
    541 #  of tall vegetation we need to correct this by a certain fraction 
    542 #  of the vegetation height. This is called the roughness height in 
    543 #  ORCHIDEE talk. 
    544 ROUGHHEIGHT = 0.0 
    545 # default = 0.0 
    546  
    547 # The snow albedo used by SECHIBA 
    548 # This option allows the user to impose a snow albedo. 
    549 #  Default behaviour is to use the model of snow albedo 
    550 #  developed by Chalita (1993). 
    551 CONDVEG_SNOWA = default 
    552 # default = use the model of snow albedo developed by Chalita 
    553  
    554 # Switch bare soil albedo dependent (if TRUE) on soil wetness 
    555 # If TRUE, the model for bare soil albedo is the old formulation. 
    556 #  Then it depend on the soil dry or wetness. If FALSE, it is the  
    557 #  new computation that is taken, it is only function of soil color. 
    558 ALB_BARE_MODEL = FALSE 
    559 # default = FALSE 
    560  
    561 # Initial snow mass if not found in restart 
    562 # The initial value of snow mass if its value is not found 
    563 #   in the restart file. This should only be used if the model is  
    564 #   started without a restart file. 
    565 HYDROL_SNOW = 0.0 
    566 # default = 0.0 
    567  
    568  
    569 # Initial snow age if not found in restart 
    570 # The initial value of snow age if its value is not found 
    571 #  in the restart file. This should only be used if the model is  
    572 #  started without a restart file. 
    573 HYDROL_SNOWAGE = 0.0 
    574 # default = 0.0 
    575  
    576 # Initial snow amount on ice, lakes, etc. if not found in restart 
    577 # The initial value of snow if its value is not found 
    578 #  in the restart file. This should only be used if the model is  
    579 #  started without a restart file. 
    580 HYDROL_SNOW_NOBIO = 0.0 
    581 # default = 0.0 
    582  
    583 # Initial snow age on ice, lakes, etc. if not found in restart 
    584 # The initial value of snow age if its value is not found 
    585 #  in the restart file. This should only be used if the model is  
    586 #  started without a restart file. 
    587 HYDROL_SNOW_NOBIO_AGE = 0.0 
    588 # default = 0.0 
    589  
    590 # Initial soil moisture stress if not found in restart 
    591 # The initial value of soil moisture stress if its value is not found 
    592 #  in the restart file. This should only be used if the model is  
    593 #  started without a restart file. 
    594 HYDROL_HUMR = 1.0 
    595 # default = 1.0 
    596  
    597 # Total depth of soil reservoir 
    598 HYDROL_SOIL_DEPTH = 2. 
    599 # default = 2. 
    600  
    601 # Root profile 
    602 # Default values were defined for 2 meters soil depth. 
    603 # For 4 meters soil depth, you may use those ones : 
    604 # 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
    605 HYDROL_HUMCSTE= 5.0, 0.8, 0.8, 1.0, 0.8, 0.8, 1.0, 1.0, 0.8, 4.0, 4.0, 4.0, 4.0  
    606 # default =  5., .8, .8, 1., .8, .8, 1., 1., .8, 4., 4., 4., 4. 
    607  
    608 # Initial restart deep soil moisture if not found in restart 
    609 # The initial value of deep soil moisture if its value is not found 
    610 #  in the restart file. This should only be used if the model is  
    611 #  started without a restart file. Default behaviour is a saturated soil. 
    612 HYDROL_BQSB = default 
    613 # default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2 
    614  
    615 # Initial upper soil moisture if not found in restart 
    616 # The initial value of upper soil moisture if its value is not found 
    617 #  in the restart file. This should only be used if the model is  
    618 #  started without a restart file. 
    619 HYDROL_GQSB = 0.0 
    620 # default = 0.0 
    621  
    622 # Initial upper reservoir depth if not found in restart 
    623 # The initial value of upper reservoir depth if its value is not found 
    624 #  in the restart file. This should only be used if the model is  
    625 #  started without a restart file. 
    626 HYDROL_DSG = 0.0 
    627 # default = 0.0 
    628  
    629 # Initial dry soil above upper reservoir if not found in restart 
    630 # The initial value of dry soil above upper reservoir if its value  
    631 #  in the restart file. This should only be used if the model is  
    632 #  started without a restart file. The default behaviour 
    633 #  is to compute it from the variables above. Should be OK most of  
    634 #  the time. 
    635 HYDROL_DSP = default 
    636 # default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0 
    637  
    638 # Initial water on canopy if not found in restart 
    639 # The initial value of moisture on canopy if its value  
    640 #  in the restart file. This should only be used if the model is  
    641 #  started without a restart file. 
    642 HYDROL_QSV = 0.0 
    643 # default = 0.0 
    644  
    645 # Soil moisture on each soil tile and levels 
    646 # The initial value of mc if its value is not found 
    647 #  in the restart file. This should only be used if the model is  
    648 #  started without a restart file. 
    649 HYDROL_MOISTURE_CONTENT = 0.3 
    650 # default = 0.3 
    651  
    652 # US_NVM_NSTM_NSLM 
    653 # The initial value of us (relative moisture) if its value is not found 
    654 #  in the restart file. This should only be used if the model is  
    655 #  started without a restart file. 
    656 US_INIT = 0.0 
    657 # default = 0.0 
    658  
    659 # Coefficient for free drainage at bottom 
    660 # The initial value of free drainage if its value is not found 
    661 #  in the restart file. This should only be used if the model is  
    662 #  started without a restart file. 
    663 FREE_DRAIN_COEF = 1.0, 1.0, 1.0 
    664 # default = 1.0, 1.0, 1.0 
    665  
    666 # Bare soil evap on each soil if not found in restart 
    667 # The initial value of bare soils evap if its value is not found 
    668 #  in the restart file. This should only be used if the model is  
    669 #  started without a restart file. 
    670 EVAPNU_SOIL = 0.0 
    671 # default = 0.0 
    672  
    673 # Initial temperature if not found in restart 
    674 # The initial value of surface temperature if its value is not found 
    675 #  in the restart file. This should only be used if the model is  
    676 #  started without a restart file. 
    677 ENERBIL_TSURF = 280. 
    678 # default = 280. 
    679  
    680 # Initial Soil Potential Evaporation 
    681 # The initial value of soil potential evaporation if its value  
    682 #  is not found in the restart file. This should only be used if 
    683 #  the model is started without a restart file.  
    684 ENERBIL_EVAPOT = 0.0 
    685 # default = 0.0 
    686  
    687 # Initial soil temperature profile if not found in restart 
    688 # The initial value of the temperature profile in the soil if  
    689 #   its value is not found in the restart file. This should only  
    690 #   be used if the model is started without a restart file. Here 
    691 #   we only require one value as we will assume a constant  
    692 #   throughout the column. 
    693 THERMOSOIL_TPRO = 280. 
    694 # default = 280. 
    695  
    696 # Initial leaf CO2 level if not found in restart 
    697 # The initial value of leaf_ci if its value is not found 
    698 #  in the restart file. This should only be used if the model is 
    699 #  started without a restart file. 
    700 DIFFUCO_LEAFCI = 233. 
    701 # default = 233. 
    702  
    703  
    704 # Keep cdrag coefficient from gcm. 
    705 # Set to .TRUE. if you want q_cdrag coming from GCM. 
    706 #  Keep cdrag coefficient from gcm for latent and sensible heat fluxes. 
    707 #  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs). 
     101# Use cdrag coefficient from gcm 
    708102CDRAG_FROM_GCM = y 
    709 # default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE. 
    710  
    711  
    712 # Artificial parameter to increase or decrease canopy resistance 
    713 # Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin 
    714 # By PFT. 
    715 RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 
    716 # default = 1. 
    717  
    718103 
    719104# Interception reservoir coefficient. 
    720 # Transforms leaf area index into size of interception reservoir 
    721 #  for slowproc_derivvar or stomate. 
     105# default = 0.1 
    722106SECHIBA_QSINT = 0.02 
    723 # default = 0.1 
    724107 
     108# Parmeters related to vegetation map 
    725109#************************************************************************** 
    726 # LAND_USE 
    727 #************************************************************************** 
    728  
    729110# Read a land_use vegetation map 
    730 # pft values are needed, max time axis is 293 
     111# default = n 
    731112LAND_USE = y 
    732 # default = n 
    733113 
    734114# Year of the land_use vegetation map readed 
    735115# year off the pft map 
    736 # If LAND_USE (11 = 1860 - 1850 +1 for PFTmap.20C3M.nc, 1 for PFTmap_IPCC_2000.nc)  
     116# default = 282 
    737117VEGET_YEAR = 1 
    738 # default = 282 
    739118 
    740 # booleen to indicate that a new LAND USE file will be used (since 1.9.5 version). 
    741119# The parameter is used to bypass veget_year count  
    742120# and reinitialize it with VEGET_YEAR parameter. 
    743121# Then it is possible to change LAND USE file. 
    744122# If LAND_USE 
     123# default = y 
    745124VEGET_REINIT = n 
    746 # default = n 
    747125 
    748126# Update vegetation frequency (since 2.0 version) 
    749 # The veget datas will be update each this time step. 
    750 # If LAND_USE 
     127# The veget datas will be update at this period if LAND_USE 
     128# default = 1Y 
    751129VEGET_UPDATE = _AUTO_ 
    752 # default = 1Y 
    753130 
    754131# treat land use modifications 
     
    757134# deforestation.                                 
    758135# If LAND_USE 
     136# default = y 
    759137LAND_COVER_CHANGE = _AUTO_ 
    760 # default = y 
    761138 
    762 #************************************************************************** 
     139# Read reftemp file. Note behaviour and default value in the code has change in rev 2441 trunk ORCHIDEE 
     140# default=NONE 
     141REFTEMP_FILE=reftemp.nc 
    763142 
    764 # agriculture allowed? 
    765 # With this variable, you can determine 
    766 #  whether agriculture is allowed 
    767 AGRICULTURE = y 
    768 # default = y 
    769  
    770 # Harvert model for agricol PFTs. 
    771 # Compute harvest above ground biomass for agriculture. 
    772 # Change daily turnover. 
    773 HARVEST_AGRI = y 
    774 # default = y 
    775  
    776 # herbivores allowed? 
    777 # With this variable, you can activate herbivores  
    778 HERBIVORES = n 
    779 # default = n 
    780  
    781 # treat expansion of PFTs across a grid cell? 
    782 # With this variable, you can determine 
    783 #  whether we treat expansion of PFTs across a 
    784 #  grid cell. 
    785 TREAT_EXPANSION = n 
    786 # default = n 
    787  
    788 #************************************************************************** 
    789  
    790 # Time within the day simulated 
    791 # This is the time spent simulating the current day. This variable is 
    792 #  prognostic as it will trigger all the computations which are 
    793 #  only done once a day. 
    794 SECHIBA_DAY = 0.0 
    795 # default = 0.0 
    796  
    797 # Time step of STOMATE and other slow processes 
    798 # Time step (s) of regular update of vegetation 
    799 #  cover, LAI etc. This is also the time step 
    800 #  of STOMATE. 
    801 DT_SLOW = 86400. 
    802 # default = un_jour = 86400. 
    803  
    804 #************************************************************************** 
    805  
    806 # Allows to switch on the multilayer hydrology of CWRR 
    807 # This flag allows the user to decide if the vertical 
    808 #  hydrology should be treated using the multi-layer  
    809 #  diffusion scheme adapted from CWRR by Patricia de Rosnay. 
    810 #  by default the Choisnel hydrology is used. 
    811 HYDROL_CWRR = y  
    812 # default = n 
    813  
    814 # do horizontal diffusion? 
    815 # If TRUE, then water can diffuse horizontally between 
    816 #  the PFTs' water reservoirs. 
    817 HYDROL_OK_HDIFF = n 
    818 # default = n 
    819   
    820  
    821 # time scale (s) for horizontal diffusion of water 
    822 # If HYDROL_OK_HDIFF 
    823 # Defines how fast diffusion occurs horizontally between 
    824 #  the individual PFTs' water reservoirs. If infinite, no 
    825 #  diffusion. 
    826 HYDROL_TAU_HDIFF = 1800. 
    827 # default = 86400. 
    828  
    829 # Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8). 
    830 # During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall 
    831 #  will get directly to the ground without being intercepted, for each PFT.. 
    832 PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    833 # default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    834  
    835 # Decides if we route the water or not 
    836 # This flag allows the user to decide if the runoff 
    837 #  and drainage should be routed to the ocean 
    838 #  and to downstream grid boxes. 
    839 RIVER_ROUTING = y 
    840 # default = n 
    841  
    842 # Name of file which contains the routing information 
    843 # The file provided here should allow the routing module to 
    844 #  read the high resolution grid of basins and the flow direction  
    845 #  from one mesh to the other. 
    846 ROUTING_FILE = routing.nc 
    847 # default = routing.nc 
    848  
    849 # Time step of the routing scheme 
    850 # If RIVER_ROUTING 
    851 # This values gives the time step in seconds of the routing scheme.  
    852 #   It should be multiple of the main time step of ORCHIDEE. One day 
    853 #   is a good value. 
    854 ROUTING_TIMESTEP = 86400 
    855 # default = 86400 
    856  
    857 # Number of rivers  
    858 # If RIVER_ROUTING 
    859 # This parameter chooses the number of largest river basins 
    860 #  which should be treated as independently as rivers and not 
    861 #  flow into the oceans as diffusion coastal flow. 
    862 ROUTING_RIVERS = 50 
    863 # default = 50 
    864  
    865 # Should we compute an irrigation flux  
    866 # This parameters allows the user to ask the model 
    867 #  to compute an irigation flux. This performed for the 
    868 #  on very simple hypothesis. The idea is to have a good 
    869 #  map of irrigated areas and a simple function which estimates 
    870 #  the need to irrigate. 
    871 DO_IRRIGATION = n 
    872 # default = n 
    873  
    874 # Name of file which contains the map of irrigated areas 
    875 # If IRRIGATE 
    876 # The name of the file to be opened to read the field 
    877 #  with the area in m^2 of the area irrigated within each 
    878 #  0.5 0.5 deg grid box. The map currently used is the one 
    879 #  developed by the Center for Environmental Systems Research  
    880 #  in Kassel (1995). 
    881 IRRIGATION_FILE = irrigated.nc 
    882 # default = irrigated.nc 
    883  
    884 # Should we include floodplains  
    885 # This parameters allows the user to ask the model 
    886 #  to take into account the flood plains and return  
    887 #  the water into the soil moisture. It then can go  
    888 #  back to the atmopshere. This tried to simulate  
    889 #  internal deltas of rivers. 
    890 DO_FLOODPLAINS = n 
    891 # default = n 
    892  
    893 # Use XIOS for writing diagnostics file 
    894 # defulat = n 
    895 XIOS_ORCHIDEE_OK = _AUTO_ 
    896 #************************************************************************** 
  • CONFIG/UNIFORM/v6/IPSLCM6/GENERAL/PARAM/orchidee.def_Choi

    r2343 r2410  
    11# 
    22#************************************************************************** 
    3 #                    Namelist for ORCHIDEE 
    4 #************************************************************************** 
    5 # 
    6 # 
    7 #************************************************************************** 
    8 #          OPTIONS NOT SET 
    9 #************************************************************************** 
    10 # 
    11 # 
    12 #************************************************************************** 
    13 #          Management of display in the run of ORCHIDEE 
     3#                    Parameter file list for ORCHIDEE 
    144#************************************************************************** 
    155 
    16 # Model chatting level 
    17 # level of online diagnostics in STOMATE (0-4) 
    18 # With this variable, you can determine how much online information STOMATE 
    19 #  gives during the run. 0 means virtually no info. 
    20 BAVARD = 1 
     6# Input and output 
     7#************************************************************************** 
     8# Restart the time from the GCM.  
     9# default = n 
     10SECHIBA_reset_time = y 
     11 
     12# Name of restart to read for initial conditions 
     13# default = NONE 
     14SECHIBA_restart_in = _AUTOBLOCKER_ 
     15 
     16# Name of restart to read for initial conditions of STOMATE 
     17# default = NONE 
     18STOMATE_RESTART_FILEIN = _AUTOBLOCKER_ 
     19 
     20# Use XIOS for writing diagnostics file 
     21# defulat = n 
     22XIOS_ORCHIDEE_OK = _AUTO_ 
     23 
     24# Flag to activate sechiba_out_2.nc history file for SECHIBA 
     25# default  = FALSE 
     26SECHIBA_HISTFILE2 = _AUTO_ 
     27 
     28# SECHIBA history output level (0..10) 
     29# default = 5 
     30SECHIBA_HISTLEVEL = _AUTO_ 
     31 
     32# SECHIBA history 2 output level (0..10) 
    2133# default = 1 
     34SECHIBA_HISTLEVEL2 = _AUTO_ 
    2235 
    23 # Flag for debug information 
    24 # This option allows to switch on the output of debug 
    25 #         information without recompiling the code. 
    26 DEBUG_INFO = n 
    27 #default = n 
     36# STOMATE history output level (0..10) 
     37# default = 10 
     38STOMATE_HISTLEVEL = _AUTO_ 
    2839 
    29 # ORCHIDEE will print more messages 
    30 # This flag permits to print more debug messages in the run. 
    31 LONGPRINT = n 
    32 #default = n 
     40# Writefrequency in seconds in sechiba_history.nc 
     41# default = 86400.0 
     42WRITE_STEP = _AUTO_ 
    3343 
    34 #--------------------------------------------------------------------- 
     44# Writefrequency in seconds sechiba_out_2.nc  
     45# default = 1800.0 
     46WRITE_STEP2 = _AUTO_ 
    3547 
    36 # To reset the time coming from SECHIBA restart file 
    37 # This option allows the model to override the time 
    38 #  found in the restart file of SECHIBA with the time 
    39 #  of the first call. That is the restart time of the GCM. 
    40 SECHIBA_reset_time = y 
     48# Writefrequency in days in stomate_history.nc 
     49# default = 10. 
     50STOMATE_HIST_DT = _AUTO_ 
     51 
     52# Writefrequency in days or -1 for monthly output in stomate_ipcc_history.nc 
     53# default = 0. 
     54STOMATE_IPCC_HIST_DT = -1 
     55 
     56 
     57# Hydrology parameters 
     58#************************************************************************** 
     59# Activate the multi-layer diffusion scheme adapted from CWRR 
     60# by default the Choisnel hydrology is used. 
    4161# default = n 
     62HYDROL_CWRR = n  
     63 
     64# Total depth of soil reservoir 
     65# default = 2./4. depending on HYDROL_CWRR 
     66HYDROL_SOIL_DEPTH = 4. 
     67 
     68# Root profile 
     69HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
     70 
     71# Activate river routing 
     72# default = n 
     73RIVER_ROUTING = y 
     74 
    4275 
    4376#************************************************************************** 
    44 #          Files : incoming / forcing / restart /output 
    45 #************************************************************************** 
    46 # Ancillary files : 
    47 #--------------------------------------------------------------------- 
     77# Activate Stomate component 
     78# default = n 
     79STOMATE_OK_STOMATE = _AUTOBLOCKER_  
    4880 
    49 # Name of file from which the vegetation map is to be read 
    50 # If !IMPOSE_VEG 
    51 # If LAND_USE  
    52 #   default = pft_new.nc 
    53 #   The name of the file to be opened to read a vegetation 
    54 #   map (in pft) is to be given here.  
    55 # If !LAND_USE 
    56 #   default = ../surfmap/carteveg5km.nc 
    57 #   The name of the file to be opened to read the vegetation 
    58 #   map is to be given here. Usualy SECHIBA runs with a 5kmx5km 
    59 #   map which is derived from the IGBP one. We assume that we have 
    60 #   a classification in 87 types. This is Olson modified by Viovy. 
    61 VEGETATION_FILE = PFTmap.nc 
     81# Activate calculations of CO2 according to Farqhuar and Ball 
     82# default = n 
     83STOMATE_OK_CO2 = y 
    6284 
    63  
    64 # Name of file from which the bare soil albedo 
    65 # If !IMPOSE_AZE 
    66 # The name of the file to be opened to read the soil types from  
    67 #  which we derive then the bare soil albedos. This file is 1x1  
    68 #  deg and based on the soil colors defined by Wilson and Henderson-Seller. 
    69 SOILALB_FILE = soils_param.nc 
    70 # default = ../surfmap/soils_param.nc 
    71  
    72 # Name of file from which soil types are read 
    73 # If !IMPOSE_VEG 
    74 # The name of the file to be opened to read the soil types.  
    75 #  The data from this file is then interpolated to the grid of 
    76 #  of the model. The aim is to get fractions for sand loam and 
    77 #  clay in each grid box. This information is used for soil hydrology 
    78 #  and respiration. 
    79 #  This parameter change name in newer ORCHIDEE versions; SOILTYPE_FILE=>SOILCLASS_FILE 
    80 SOILTYPE_FILE = soils_param.nc 
    81 SOILCLASS_FILE= soils_param.nc 
    82 # default = ../surfmap/soils_param.nc 
    83  
    84 # Name of file from which the reference 
    85 # The name of the file to be opened to read 
    86 #  temperature is read 
    87 #  the reference surface temperature. 
    88 #  The data from this file is then interpolated 
    89 #  to the grid of the model. 
    90 #  The aim is to get a reference temperature either 
    91 #  to initialize the corresponding prognostic model 
    92 #  variable correctly (ok_dgvm = TRUE) or to impose it 
    93 #  as boundary condition (ok_dgvm = FALSE) 
    94 REFTEMP_FILE = reftemp.nc 
    95 # default = reftemp.nc 
    96  
    97 # Name of file containg information about topography. 
    98 TOPOGRAPHY_FILE =cartepente2d_15min.nc 
    99  
    100 # Input and output restart file for SECHIBA : 
    101 #--------------------------------------------------------------------- 
    102  
    103 # Name of restart to READ for initial conditions 
    104 # This is the name of the file which will be opened 
    105 #  to extract the initial values of all prognostic 
    106 #  values of the model. This has to be a netCDF file. 
    107 #  Not truly COADS compliant. NONE will mean that 
    108 #  no restart file is to be expected. 
    109 SECHIBA_restart_in = _AUTO_ 
    110 # default = NONE 
    111  
    112 # Name of restart files to be created by SECHIBA 
    113 # This variable give the name for the restart files.  
    114 #  The restart software within IOIPSL will add .nc if needed. 
    115 SECHIBA_rest_out = sechiba_rest_out.nc 
    116 # default = sechiba_rest_out.nc 
    117  
    118 # Input and output restart file for STOMATE : 
    119 #--------------------------------------------------------------------- 
    120  
    121 # Name of restart to READ for initial conditions of STOMATE 
    122 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    123 # This is the name of the file which will be opened of STOMATE 
    124 #   to extract the initial values of all prognostic values of STOMATE. 
    125 STOMATE_RESTART_FILEIN = _AUTO_ 
    126 # default = NONE 
    127  
    128 # Name of restart files to be created by STOMATE 
    129 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    130 # This is the name of the file which will be opened 
    131 #        to write the final values of all prognostic values 
    132 #        of STOMATE. 
    133 STOMATE_RESTART_FILEOUT = stomate_rest_out.nc 
    134 # default = stomate_restart.nc 
    135  
    136 # Forcing files for TESTSTOMATE and FORCESOIL 
    137 #--------------------------------------------------------------------- 
    138  
    139 # Name of STOMATE's forcing file 
    140 # Name that will be given to STOMATE's offline forcing file 
    141 #STOMATE_FORCING_NAME = stomate_forcing.nc 
    142 #default = NONE 
    143  
    144 # Size of STOMATE forcing data in memory (MB) 
    145 # This variable determines how many 
    146 #  forcing states will be kept in memory. 
    147 #  Must be a compromise between memory 
    148 #  use and frequeny of disk access. 
    149 STOMATE_FORCING_MEMSIZE = 50 
    150 # default = 50 
    151  
    152 # Name of STOMATE's carbon forcing file 
    153 # Name that will be given to STOMATE's carbon offline forcing file 
    154 #STOMATE_CFORCING_NAME = stomate_Cforcing.nc 
    155 # default = NONE 
    156  
    157  
    158 # Produced forcing file name (SECHIBA puis STOMATE) : 
    159 #--------------------------------------------------------------------- 
    160  
    161 # ORCHIDEE will write out its forcing to a file 
    162 # This flag allows to write to a file all the variables 
    163 #  which are used to force the land-surface. The file  
    164 #  has exactly the same format than a normal off-line forcing 
    165 #  and thus this forcing can be used for forcing ORCHIDEE. 
    166 #ORCHIDEE_WATCHOUT = y 
    167 # default = n 
    168  
    169 # Filenane for the ORCHIDEE forcing file 
    170 # If ORCHIDEE_WATCHOUT 
    171 # This is the name of the file in which the 
    172 #  forcing used here will be written for later use.  
    173 WATCHOUT_FILE = orchidee_watchout.nc 
    174 # default = orchidee_watchout.nc 
    175  
    176 # ORCHIDEE will write out with this frequency 
    177 # If ORCHIDEE_WATCHOUT 
    178 # This flag indicates the frequency of the write of the variables.  
    179 DT_WATCHOUT = 1800 
    180 # default = dt 
    181  
    182 # STOMATE does minimum service 
    183 # set to TRUE if you want STOMATE to read 
    184 #  and write its start files and keep track 
    185 #  of longer-term biometeorological variables. 
    186 #  This is useful if OK_STOMATE is not set, 
    187 #  but if you intend to activate STOMATE later. 
    188 #  In that case, this run can serve as a  
    189 #  spinup for longer-term biometeorological 
    190 #  variables. 
    191 #STOMATE_WATCHOUT = y 
    192 # default = n 
    193  
    194 # Output file name (SECHIBA and STOMATE) : 
    195 #--------------------------------------------------------------------- 
    196 # Name of file in which the output is going 
    197 # This file is going to be created by the model 
    198 #  to be written 
    199 #  and will contain the output from the model. 
    200 #  This file is a truly COADS compliant netCDF file. 
    201 #  It will be generated by the hist software from 
    202 #  the IOIPSL package. 
    203 OUTPUT_FILE = sechiba_history.nc 
    204 # default = cabauw_out.nc 
    205  
    206 # Flag to switch on histfile 2 for SECHIBA (hi-frequency ?) 
    207 # This Flag switch on the second SECHIBA writing for hi (or low)  
    208 #  frequency writing. This second output is optional and not written 
    209 #  by default. 
    210 SECHIBA_HISTFILE2 = _AUTO_ 
    211 # default  = FALSE 
    212  
    213 # Name of file in which the output number 2 is going 
    214 #   to be written 
    215 # If SECHIBA_HISTFILE2 
    216 # This file is going to be created by the model 
    217 #   and will contain the output 2 from the model. 
    218 SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc 
    219 # default  = sechiba_out_2.nc 
    220  
    221 # Name of file in which STOMATE's output is going to be written 
    222 # This file is going to be created by the model 
    223 #  and will contain the output from the model. 
    224 #  This file is a truly COADS compliant netCDF file. 
    225 #  It will be generated by the hist software from 
    226 #  the IOIPSL package. 
    227 STOMATE_OUTPUT_FILE = stomate_history.nc 
    228 # default = stomate_history.nc 
    229  
    230 # Write levels for outputs files (number of variables) : 
    231 #--------------------------------------------------------------------- 
    232  
    233 # SECHIBA history output level (0..10) 
    234 # Chooses the list of variables in the history file.  
    235 #  Values between 0: nothing is written; 10: everything is  
    236 #  written are available More details can be found on the web under documentation. 
    237 #  web under documentation. 
    238 SECHIBA_HISTLEVEL = _AUTO_ 
    239 # default = 5 
    240  
    241 # SECHIBA history 2 output level (0..10) 
    242 # If SECHIBA_HISTFILE2 
    243 # Chooses the list of variables in the history file.  
    244 #   Values between 0: nothing is written; 10: everything is  
    245 #   written are available More details can be found on the web under documentation. 
    246 #   web under documentation. 
    247 # First level contains all ORCHIDEE outputs. 
    248 SECHIBA_HISTLEVEL2 = _AUTO_ 
    249 # default = 1 
    250  
    251 # STOMATE history output level (0..10) 
    252 #  0: nothing is written; 10: everything is written 
    253 STOMATE_HISTLEVEL = _AUTO_ 
    254 # default = 10 
    255  
    256 #-------------------------------------------------------------------- 
    257 # STOMATE_IPCC_OUTPUT_FILE 
    258 # This file is going to be created by the model 
    259 #    and will contain the output from the model. 
    260 #    This file is a truly COADS compliant netCDF file. 
    261 #    It will be generated by the hist software from 
    262 #    the IOIPSL package. 
    263 # Name of file in which STOMATE's output is going 
    264 # to be written 
    265 STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc 
    266 # default = stomate_ipcc_history.nc 
    267  
    268 # STOMATE_IPCC_HIST_DT 
    269 # Time step of the STOMATE IPCC history file 
    270 # STOMATE IPCC history time step (d) 
    271 STOMATE_IPCC_HIST_DT = -1 
    272 # default = 0. 
    273  
    274 # Write frequency for output files (SECHIBA in seconds et 
    275 # STOMATE in days) : 
    276 #--------------------------------------------------------------------- 
    277 # Frequency in seconds at which to WRITE output 
    278 # This variables gives the frequency the output of 
    279 #  the model should be written into the netCDF file. 
    280 #  It does not affect the frequency at which the 
    281 #  operations such as averaging are done. 
    282 WRITE_STEP = _AUTO_ 
    283 # default = 86400.0 
    284  
    285 # Frequency in seconds at which to WRITE output 
    286 # If SECHIBA_HISTFILE2 
    287 # This variables gives the frequency the output 2 of 
    288 #   the model should be written into the netCDF file. 
    289 #   It does not affect the frequency at which the 
    290 #   operations such as averaging are done. 
    291 #   That is IF the coding of the calls to histdef 
    292 #   are correct ! 
    293 WRITE_STEP2 = _AUTO_ 
    294 # default = 1800.0 
    295  
    296 # STOMATE history time step (d) 
    297 # Time step of the STOMATE history file 
    298 # Care : this variable must be higher than DT_SLOW 
    299 STOMATE_HIST_DT = _AUTO_ 
    300 # default = 10. 
    301  
    302 #--------------------------------------------------------------------- 
    303 # FORCESOIL CARBON spin up parametrization 
    304 #--------------------------------------------------------------------- 
    305  
    306 # Number of time steps per year for carbon spinup. 
    307 FORCESOIL_STEP_PER_YEAR = 12 
    308 # default = 12 
    309  
    310 # Number of years saved for carbon spinup. 
    311 FORCESOIL_NB_YEAR = 1 
    312 # default = 1 
    313  
    314 #--------------------------------------------------------------------- 
    315 # Parametrization : 
    316 #--------------------------------------------------------------------- 
    317  
    318 # Activate STOMATE? 
    319 # set to TRUE if STOMATE is to be activated 
    320 # STOMATE_OK_STOMATE will be set to y or n by orchidee.driver depending on activation of stomate component SBG in config.card 
    321 STOMATE_OK_STOMATE = _AUTO_  
    322 # default = n 
    323  
    324 # Activate DGVM? 
    325 # set to TRUE if Dynamic Vegetation DGVM is to be activated 
    326 STOMATE_OK_DGVM = n 
    327 # default = n 
    328  
    329 # Activate CO2? 
    330 # set to TRUE if photosynthesis is to be activated 
    331 STOMATE_OK_CO2 = y 
    332 # default = n 
    333  
    334 # Flag to force the value of atmospheric CO2 for vegetation. 
    335 # If this flag is set to true, the ATM_CO2 parameter is used 
    336 #  to prescribe the atmospheric CO2. 
    337 # This Flag is only use in couple mode. 
    338 FORCE_CO2_VEG = FALSE 
    339 # default = FALSE 
    340  
    341 # Value for atm CO2. 
    342 # If FORCE_CO2_VEG (in not forced mode) 
    343 # Value to prescribe the atm CO2. 
    344 #  For pre-industrial simulations, the value is 286.2 . 
    345 #  348. for 1990 year. 
    346 ATM_CO2 = 350. 
    347 # default = 350. 
    348  
    349 # constant tree mortality 
    350 # If yes, then a constant mortality is applied to trees.  
    351 #  Otherwise, mortality is a function of the trees'  
    352 #  vigour (as in LPJ). 
    353 LPJ_GAP_CONST_MORT = y 
    354 # default = y 
    355  
    356 # no fire allowed 
    357 # With this variable, you can allow or not 
    358 #  the estimation of CO2 lost by fire 
    359 FIRE_DISABLE = n 
    360 # default = n 
    361  
    362 # Average method for z0 
    363 # If this flag is set to true (y) then the neutral Cdrag 
    364 #  is averaged instead of the log(z0). This should be 
    365 #  the prefered option. We still wish to keep the other 
    366 #  option so we can come back if needed. If this is 
    367 #  desired then one should set Z0CDRAG_AVE = n 
    368 Z0CDRAG_AVE = y 
    369 # default = y 
    370  
    371 # parameters describing the surface (vegetation + soil) : 
    372 #--------------------------------------------------------------------- 
    373 # 
    374 # Should the vegetation be prescribed 
    375 # This flag allows the user to impose a vegetation distribution 
    376 #  and its characterisitcs. It is espacially interesting for 0D 
    377 #  simulations. On the globe it does not make too much sense as 
    378 #  it imposes the same vegetation everywhere 
    379 IMPOSE_VEG = n 
    380 # default = n 
    381  
    382 # Flag to use old "interpolation" of vegetation map. 
    383 # IF NOT IMPOSE_VEG and NOT LAND_USE 
    384 #  If you want to recover the old (ie orchidee_1_2 branch)  
    385 #   "interpolation" of vegetation map. 
    386 SLOWPROC_VEGET_OLD_INTERPOL = n 
    387 # default = n 
    388  
    389 # Vegetation distribution within the mesh (0-dim mode) 
    390 # If IMPOSE_VEG 
    391 # The fraction of vegetation is read from the restart file. If 
    392 #  it is not found there we will use the values provided here. 
    393 SECHIBA_VEG__01 = 0.2 
    394 SECHIBA_VEG__02 = 0.0 
    395 SECHIBA_VEG__03 = 0.0 
    396 SECHIBA_VEG__04 = 0.0 
    397 SECHIBA_VEG__05 = 0.0 
    398 SECHIBA_VEG__06 = 0.0 
    399 SECHIBA_VEG__07 = 0.0 
    400 SECHIBA_VEG__08 = 0.0 
    401 SECHIBA_VEG__09 = 0.0 
    402 SECHIBA_VEG__10 = 0.8 
    403 SECHIBA_VEG__11 = 0.0 
    404 SECHIBA_VEG__12 = 0.0 
    405 SECHIBA_VEG__13 = 0.0 
    406 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    407  
    408 # Maximum vegetation distribution within the mesh (0-dim mode) 
    409 # If IMPOSE_VEG 
    410 # The fraction of vegetation is read from the restart file. If 
    411 #  it is not found there we will use the values provided here. 
    412 SECHIBA_VEGMAX__01 = 0.2 
    413 SECHIBA_VEGMAX__02 = 0.0 
    414 SECHIBA_VEGMAX__03 = 0.0 
    415 SECHIBA_VEGMAX__04 = 0.0 
    416 SECHIBA_VEGMAX__05 = 0.0 
    417 SECHIBA_VEGMAX__06 = 0.0 
    418 SECHIBA_VEGMAX__07 = 0.0 
    419 SECHIBA_VEGMAX__08 = 0.0 
    420 SECHIBA_VEGMAX__09 = 0.0 
    421 SECHIBA_VEGMAX__10 = 0.8 
    422 SECHIBA_VEGMAX__11 = 0.0 
    423 SECHIBA_VEGMAX__12 = 0.0 
    424 SECHIBA_VEGMAX__13 = 0.0 
    425 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    426  
    427 # LAI for all vegetation types (0-dim mode) 
    428 # If IMPOSE_VEG 
    429 # The maximum LAI used in the 0dim mode. The values should be found 
    430 #  in the restart file. The new values of LAI will be computed anyway 
    431 #  at the end of the current day. The need for this variable is caused 
    432 #  by the fact that the model may stop during a day and thus we have not 
    433 #  yet been through the routines which compute the new surface conditions. 
    434 SECHIBA_LAI__01 = 0. 
    435 SECHIBA_LAI__02 = 8. 
    436 SECHIBA_LAI__03 = 8. 
    437 SECHIBA_LAI__04 = 4. 
    438 SECHIBA_LAI__05 = 4.5 
    439 SECHIBA_LAI__06 = 4.5 
    440 SECHIBA_LAI__07 = 4. 
    441 SECHIBA_LAI__08 = 4.5 
    442 SECHIBA_LAI__09 = 4. 
    443 SECHIBA_LAI__10 = 2. 
    444 SECHIBA_LAI__11 = 2. 
    445 SECHIBA_LAI__12 = 2. 
    446 SECHIBA_LAI__13 = 2. 
    447 # default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2. 
    448  
    449 # Height for all vegetation types (m) 
    450 # If IMPOSE_VEG 
    451 # The height used in the 0dim mode. The values should be found 
    452 #  in the restart file. The new values of height will be computed anyway 
    453 #  at the end of the current day. The need for this variable is caused 
    454 #  by the fact that the model may stop during a day and thus we have not 
    455 #  yet been through the routines which compute the new surface conditions. 
     85# Prescribed height of vegetation 
     86# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    45687SLOWPROC_HEIGHT__01 = 0. 
    45788SLOWPROC_HEIGHT__02 = 50. 
     
    46798SLOWPROC_HEIGHT__12 = .4 
    46899SLOWPROC_HEIGHT__13 = .4 
    469 # default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    470100 
    471  
    472 # Fraction of the 3 soil types (0-dim mode) 
    473 # If IMPOSE_VEG 
    474 # Determines the fraction for the 3 soil types 
    475 #  in the mesh in the following order : sand loam and clay. 
    476 SOIL_FRACTIONS__01 = 0.28 
    477 SOIL_FRACTIONS__02 = 0.52 
    478 SOIL_FRACTIONS__03 = 0.20 
    479 # default = 0.28, 0.52, 0.20 
    480  
    481 # Fraction of other surface types within the mesh (0-dim mode) 
    482 # If IMPOSE_VEG 
    483 # The fraction of ice, lakes, etc. is read from the restart file. If 
    484 #  it is not found there we will use the values provided here. 
    485 #  For the moment, there is only ice. 
    486 SECHIBA_FRAC_NOBIO = 0.0 
    487 # default = 0.0 
    488  
    489 # Fraction of the clay fraction (0-dim mode) 
    490 # If IMPOSE_VEG 
    491 # Determines the fraction of clay in the grid box. 
    492 CLAY_FRACTION = 0.2 
    493 # default = 0.2 
    494  
    495 # Should the surface parameters be prescribed 
    496 # This flag allows the user to impose the surface parameters 
    497 #  (Albedo Roughness and Emissivity). It is espacially interesting for 0D 
    498 #  simulations. On the globe it does not make too much sense as 
    499 #  it imposes the same vegetation everywhere 
    500 IMPOSE_AZE = n 
    501 # default = n 
    502  
    503 # Emissivity of the surface for LW radiation 
    504 # If IMPOSE_AZE 
    505 # The surface emissivity used for compution the LE emission 
    506 #  of the surface in a 0-dim version. Values range between  
    507 #  0.97 and 1.. The GCM uses 0.98. 
    508 CONDVEG_EMIS = 1.0 
    509 # default = 1.0 
    510  
    511 # SW visible albedo for the surface 
    512 # If IMPOSE_AZE 
    513 # Surface albedo in visible wavelengths to be used  
    514 #  on the point if a 0-dim version of SECHIBA is used.  
    515 #  Look at the description of the forcing data for  
    516 #  the correct value. 
    517 CONDVEG_ALBVIS = 0.25 
    518 # default = 0.25 
    519  
    520 # SW near infrared albedo for the surface 
    521 # If IMPOSE_AZE 
    522 # Surface albedo in near infrared wavelengths to be used  
    523 #  on the point if a 0-dim version of SECHIBA is used.  
    524 #  Look at the description of the forcing data for  
    525 #  the correct value. 
    526 CONDVEG_ALBNIR = 0.25 
    527 # default = 0.25 
    528  
    529 # Surface roughness (m) 
    530 # If IMPOSE_AZE 
    531 # Surface rougness to be used on the point if a 0-dim version 
    532 #  of SECHIBA is used. Look at the description of the forcing   
    533 #  data for the correct value. 
    534 CONDVEG_Z0 = 0.15 
    535 # default = 0.15_stnd 
    536  
    537 # Height to be added to the height of the first level (m) 
    538 # If IMPOSE_AZE 
    539 # ORCHIDEE assumes that the atmospheric level height is counted 
    540 #  from the zero wind level. Thus to take into account the roughness 
    541 #  of tall vegetation we need to correct this by a certain fraction 
    542 #  of the vegetation height. This is called the roughness height in 
    543 #  ORCHIDEE talk. 
    544 ROUGHHEIGHT = 0.0 
    545 # default = 0.0 
    546  
    547 # The snow albedo used by SECHIBA 
    548 # This option allows the user to impose a snow albedo. 
    549 #  Default behaviour is to use the model of snow albedo 
    550 #  developed by Chalita (1993). 
    551 CONDVEG_SNOWA = default 
    552 # default = use the model of snow albedo developed by Chalita 
    553  
    554 # Switch bare soil albedo dependent (if TRUE) on soil wetness 
    555 # If TRUE, the model for bare soil albedo is the old formulation. 
    556 #  Then it depend on the soil dry or wetness. If FALSE, it is the  
    557 #  new computation that is taken, it is only function of soil color. 
    558 ALB_BARE_MODEL = FALSE 
    559 # default = FALSE 
    560  
    561 # Initial snow mass if not found in restart 
    562 # The initial value of snow mass if its value is not found 
    563 #   in the restart file. This should only be used if the model is  
    564 #   started without a restart file. 
    565 HYDROL_SNOW = 0.0 
    566 # default = 0.0 
    567  
    568  
    569 # Initial snow age if not found in restart 
    570 # The initial value of snow age if its value is not found 
    571 #  in the restart file. This should only be used if the model is  
    572 #  started without a restart file. 
    573 HYDROL_SNOWAGE = 0.0 
    574 # default = 0.0 
    575  
    576 # Initial snow amount on ice, lakes, etc. if not found in restart 
    577 # The initial value of snow if its value is not found 
    578 #  in the restart file. This should only be used if the model is  
    579 #  started without a restart file. 
    580 HYDROL_SNOW_NOBIO = 0.0 
    581 # default = 0.0 
    582  
    583 # Initial snow age on ice, lakes, etc. if not found in restart 
    584 # The initial value of snow age if its value is not found 
    585 #  in the restart file. This should only be used if the model is  
    586 #  started without a restart file. 
    587 HYDROL_SNOW_NOBIO_AGE = 0.0 
    588 # default = 0.0 
    589  
    590 # Initial soil moisture stress if not found in restart 
    591 # The initial value of soil moisture stress if its value is not found 
    592 #  in the restart file. This should only be used if the model is  
    593 #  started without a restart file. 
    594 HYDROL_HUMR = 1.0 
    595 # default = 1.0 
    596  
    597 # Total depth of soil reservoir 
    598 HYDROL_SOIL_DEPTH = 4. 
    599 # default = 2. 
    600  
    601 # Root profile 
    602 # Default values were defined for 2 meters soil depth. 
    603 # For 4 meters soil depth, you may use those ones : 
    604 # 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
    605 HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
    606 # default =  5., .8, .8, 1., .8, .8, 1., 1., .8, 4., 4., 4., 4. 
    607  
    608 # Initial restart deep soil moisture if not found in restart 
    609 # The initial value of deep soil moisture if its value is not found 
    610 #  in the restart file. This should only be used if the model is  
    611 #  started without a restart file. Default behaviour is a saturated soil. 
    612 HYDROL_BQSB = default 
    613 # default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2 
    614  
    615 # Initial upper soil moisture if not found in restart 
    616 # The initial value of upper soil moisture if its value is not found 
    617 #  in the restart file. This should only be used if the model is  
    618 #  started without a restart file. 
    619 HYDROL_GQSB = 0.0 
    620 # default = 0.0 
    621  
    622 # Initial upper reservoir depth if not found in restart 
    623 # The initial value of upper reservoir depth if its value is not found 
    624 #  in the restart file. This should only be used if the model is  
    625 #  started without a restart file. 
    626 HYDROL_DSG = 0.0 
    627 # default = 0.0 
    628  
    629 # Initial dry soil above upper reservoir if not found in restart 
    630 # The initial value of dry soil above upper reservoir if its value  
    631 #  in the restart file. This should only be used if the model is  
    632 #  started without a restart file. The default behaviour 
    633 #  is to compute it from the variables above. Should be OK most of  
    634 #  the time. 
    635 HYDROL_DSP = default 
    636 # default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0 
    637  
    638 # Initial water on canopy if not found in restart 
    639 # The initial value of moisture on canopy if its value  
    640 #  in the restart file. This should only be used if the model is  
    641 #  started without a restart file. 
    642 HYDROL_QSV = 0.0 
    643 # default = 0.0 
    644  
    645 # Soil moisture on each soil tile and levels 
    646 # The initial value of mc if its value is not found 
    647 #  in the restart file. This should only be used if the model is  
    648 #  started without a restart file. 
    649 HYDROL_MOISTURE_CONTENT = 0.3 
    650 # default = 0.3 
    651  
    652 # US_NVM_NSTM_NSLM 
    653 # The initial value of us (relative moisture) if its value is not found 
    654 #  in the restart file. This should only be used if the model is  
    655 #  started without a restart file. 
    656 US_INIT = 0.0 
    657 # default = 0.0 
    658  
    659 # Coefficient for free drainage at bottom 
    660 # The initial value of free drainage if its value is not found 
    661 #  in the restart file. This should only be used if the model is  
    662 #  started without a restart file. 
    663 FREE_DRAIN_COEF = 1.0, 1.0, 1.0 
    664 # default = 1.0, 1.0, 1.0 
    665  
    666 # Bare soil evap on each soil if not found in restart 
    667 # The initial value of bare soils evap if its value is not found 
    668 #  in the restart file. This should only be used if the model is  
    669 #  started without a restart file. 
    670 EVAPNU_SOIL = 0.0 
    671 # default = 0.0 
    672  
    673 # Initial temperature if not found in restart 
    674 # The initial value of surface temperature if its value is not found 
    675 #  in the restart file. This should only be used if the model is  
    676 #  started without a restart file. 
    677 ENERBIL_TSURF = 280. 
    678 # default = 280. 
    679  
    680 # Initial Soil Potential Evaporation 
    681 # The initial value of soil potential evaporation if its value  
    682 #  is not found in the restart file. This should only be used if 
    683 #  the model is started without a restart file.  
    684 ENERBIL_EVAPOT = 0.0 
    685 # default = 0.0 
    686  
    687 # Initial soil temperature profile if not found in restart 
    688 # The initial value of the temperature profile in the soil if  
    689 #   its value is not found in the restart file. This should only  
    690 #   be used if the model is started without a restart file. Here 
    691 #   we only require one value as we will assume a constant  
    692 #   throughout the column. 
    693 THERMOSOIL_TPRO = 280. 
    694 # default = 280. 
    695  
    696 # Initial leaf CO2 level if not found in restart 
    697 # The initial value of leaf_ci if its value is not found 
    698 #  in the restart file. This should only be used if the model is 
    699 #  started without a restart file. 
    700 DIFFUCO_LEAFCI = 233. 
    701 # default = 233. 
    702  
    703  
    704 # Keep cdrag coefficient from gcm. 
    705 # Set to .TRUE. if you want q_cdrag coming from GCM. 
    706 #  Keep cdrag coefficient from gcm for latent and sensible heat fluxes. 
    707 #  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs). 
     101# Use cdrag coefficient from gcm 
    708102CDRAG_FROM_GCM = y 
    709 # default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE. 
    710  
    711  
    712 # Artificial parameter to increase or decrease canopy resistance 
    713 # Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin 
    714 # By PFT. 
    715 RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 
    716 # default = 1. 
    717  
    718103 
    719104# Interception reservoir coefficient. 
    720 # Transforms leaf area index into size of interception reservoir 
    721 #  for slowproc_derivvar or stomate. 
     105# default = 0.1 
    722106SECHIBA_QSINT = 0.02 
    723 # default = 0.1 
    724107 
     108# Parmeters related to vegetation map 
    725109#************************************************************************** 
    726 # LAND_USE 
    727 #************************************************************************** 
    728  
    729110# Read a land_use vegetation map 
    730 # pft values are needed, max time axis is 293 
     111# default = n 
    731112LAND_USE = y 
    732 # default = n 
    733113 
    734114# Year of the land_use vegetation map readed 
    735115# year off the pft map 
    736 # If LAND_USE (11 = 1860 - 1850 +1 for PFTmap.20C3M.nc, 1 for PFTmap_IPCC_2000.nc)  
     116# default = 282 
    737117VEGET_YEAR = 1 
    738 # default = 282 
    739118 
    740 # booleen to indicate that a new LAND USE file will be used (since 1.9.5 version). 
    741119# The parameter is used to bypass veget_year count  
    742120# and reinitialize it with VEGET_YEAR parameter. 
    743121# Then it is possible to change LAND USE file. 
    744122# If LAND_USE 
     123# default = y 
    745124VEGET_REINIT = n 
    746 # default = n 
    747125 
    748126# Update vegetation frequency (since 2.0 version) 
    749 # The veget datas will be update each this time step. 
    750 # If LAND_USE 
     127# The veget datas will be update at this period if LAND_USE 
     128# default = 1Y 
    751129VEGET_UPDATE = _AUTO_ 
    752 # default = 1Y 
    753130 
    754131# treat land use modifications 
     
    757134# deforestation.                                 
    758135# If LAND_USE 
     136# default = y 
    759137LAND_COVER_CHANGE = _AUTO_ 
    760 # default = y 
    761138 
    762 #************************************************************************** 
     139# Read reftemp file. Note behaviour and default value in the code has change in rev 2441 trunk ORCHIDEE 
     140# default=NONE 
     141REFTEMP_FILE=reftemp.nc 
    763142 
    764 # agriculture allowed? 
    765 # With this variable, you can determine 
    766 #  whether agriculture is allowed 
    767 AGRICULTURE = y 
    768 # default = y 
    769  
    770 # Harvert model for agricol PFTs. 
    771 # Compute harvest above ground biomass for agriculture. 
    772 # Change daily turnover. 
    773 HARVEST_AGRI = y 
    774 # default = y 
    775  
    776 # herbivores allowed? 
    777 # With this variable, you can activate herbivores  
    778 HERBIVORES = n 
    779 # default = n 
    780  
    781 # treat expansion of PFTs across a grid cell? 
    782 # With this variable, you can determine 
    783 #  whether we treat expansion of PFTs across a 
    784 #  grid cell. 
    785 TREAT_EXPANSION = n 
    786 # default = n 
    787  
    788 #************************************************************************** 
    789  
    790 # Time within the day simulated 
    791 # This is the time spent simulating the current day. This variable is 
    792 #  prognostic as it will trigger all the computations which are 
    793 #  only done once a day. 
    794 SECHIBA_DAY = 0.0 
    795 # default = 0.0 
    796  
    797 # Time step of STOMATE and other slow processes 
    798 # Time step (s) of regular update of vegetation 
    799 #  cover, LAI etc. This is also the time step 
    800 #  of STOMATE. 
    801 DT_SLOW = 86400. 
    802 # default = un_jour = 86400. 
    803  
    804 #************************************************************************** 
    805  
    806 # Allows to switch on the multilayer hydrology of CWRR 
    807 # This flag allows the user to decide if the vertical 
    808 #  hydrology should be treated using the multi-layer  
    809 #  diffusion scheme adapted from CWRR by Patricia de Rosnay. 
    810 #  by default the Choisnel hydrology is used. 
    811 HYDROL_CWRR = n  
    812 # default = n 
    813  
    814 # do horizontal diffusion? 
    815 # If TRUE, then water can diffuse horizontally between 
    816 #  the PFTs' water reservoirs. 
    817 HYDROL_OK_HDIFF = n 
    818 # default = n 
    819   
    820  
    821 # time scale (s) for horizontal diffusion of water 
    822 # If HYDROL_OK_HDIFF 
    823 # Defines how fast diffusion occurs horizontally between 
    824 #  the individual PFTs' water reservoirs. If infinite, no 
    825 #  diffusion. 
    826 HYDROL_TAU_HDIFF = 1800. 
    827 # default = 86400. 
    828  
    829 # Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8). 
    830 # During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall 
    831 #  will get directly to the ground without being intercepted, for each PFT.. 
    832 PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    833 # default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    834  
    835 # Decides if we route the water or not 
    836 # This flag allows the user to decide if the runoff 
    837 #  and drainage should be routed to the ocean 
    838 #  and to downstream grid boxes. 
    839 RIVER_ROUTING = y 
    840 # default = n 
    841  
    842 # Name of file which contains the routing information 
    843 # The file provided here should allow the routing module to 
    844 #  read the high resolution grid of basins and the flow direction  
    845 #  from one mesh to the other. 
    846 ROUTING_FILE = routing.nc 
    847 # default = routing.nc 
    848  
    849 # Time step of the routing scheme 
    850 # If RIVER_ROUTING 
    851 # This values gives the time step in seconds of the routing scheme.  
    852 #   It should be multiple of the main time step of ORCHIDEE. One day 
    853 #   is a good value. 
    854 ROUTING_TIMESTEP = 86400 
    855 # default = 86400 
    856  
    857 # Number of rivers  
    858 # If RIVER_ROUTING 
    859 # This parameter chooses the number of largest river basins 
    860 #  which should be treated as independently as rivers and not 
    861 #  flow into the oceans as diffusion coastal flow. 
    862 ROUTING_RIVERS = 50 
    863 # default = 50 
    864  
    865 # Should we compute an irrigation flux  
    866 # This parameters allows the user to ask the model 
    867 #  to compute an irigation flux. This performed for the 
    868 #  on very simple hypothesis. The idea is to have a good 
    869 #  map of irrigated areas and a simple function which estimates 
    870 #  the need to irrigate. 
    871 DO_IRRIGATION = n 
    872 # default = n 
    873  
    874 # Name of file which contains the map of irrigated areas 
    875 # If IRRIGATE 
    876 # The name of the file to be opened to read the field 
    877 #  with the area in m^2 of the area irrigated within each 
    878 #  0.5 0.5 deg grid box. The map currently used is the one 
    879 #  developed by the Center for Environmental Systems Research  
    880 #  in Kassel (1995). 
    881 IRRIGATION_FILE = irrigated.nc 
    882 # default = irrigated.nc 
    883  
    884 # Should we include floodplains  
    885 # This parameters allows the user to ask the model 
    886 #  to take into account the flood plains and return  
    887 #  the water into the soil moisture. It then can go  
    888 #  back to the atmopshere. This tried to simulate  
    889 #  internal deltas of rivers. 
    890 DO_FLOODPLAINS = n 
    891 # default = n 
    892  
    893 # Use XIOS for writing diagnostics file 
    894 # defulat = n 
    895 XIOS_ORCHIDEE_OK = _AUTO_ 
    896 #************************************************************************** 
  • CONFIG/UNIFORM/v6/IPSLCM6/GENERAL/PARAM/run.def

    r2372 r2410  
    1111## Type de calendrier utilise 
    1212## valeur possible: earth_360d (defaut), earth_365d, earth_366d 
    13 calend= _AUTO_ 
     13calend= _AUTOBLOCKER_ 
    1414## Jour de l etat initial ( = 350  si 20 Decembre ,par expl. ,comme ici ) 
    15 dayref= _AUTO_ 
     15dayref= _AUTOBLOCKER_ 
    1616##  Annee de l etat  initial (   avec  4  chiffres   ) 
    17 anneeref= _AUTO_ 
     17anneeref= _AUTOBLOCKER_ 
    1818## Nombre de jours d integration 
    19 nday= _AUTO_ 
     19nday= _AUTOBLOCKER_ 
    2020## Remise a zero de la date initiale 
    21 raz_date= _AUTO_ 
     21raz_date= _AUTOBLOCKER_ 
    2222## periode de sortie des variables de controle (en pas) 
    2323iconser=240 
     
    2727ok_dynzon=n 
    2828## periode de stockage fichier dynzon (en jour) 
    29 periodav= _AUTO_ 
     29periodav= _AUTOBLOCKER_ 
    3030## activation du calcul d equilibrage de charge 
    3131adjust= _AUTO_ 
     
    3939### type_ocean = force / slab  /couple 
    4040### type_ocean is modified automatically by the lmdz.driver  
    41 type_ocean=_AUTO_ 
     41type_ocean=_AUTOBLOCKER_ 
    4242### version_ocean = nemo / opa8 
    4343version_ocean=nemo 
     
    4646### VEGET= y si ORCHIDEE, =n si bucket 
    4747### VEGET is modified automatically by the lmdz.driver  
    48 VEGET=_AUTO_ 
     48VEGET=_AUTOBLOCKER_ 
    4949### Choice of tracers type_trac=lmdz/inca/repr 
    5050### type_trac is set automatically by the lmdz.driver 
    51 type_trac=_AUTO_ 
     51type_trac=_AUTOBLOCKER_ 
    5252### config_inca=aero/chem needed only if type_trac=inca 
    53 config_inca=_AUTO_  
     53config_inca=_AUTOBLOCKER_  
    5454### Only concerning the program ce0l : for creating file grilles_gcm.nc 
    5555grilles_gcm_netcdf=_AUTO_ 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/orchidee.driver

    r2382 r2410  
    163163# Modify in orchidee.def VEGET_UPDATE and LAND_COVER_CHANGE if they are set in orchidee.card section UserChoices 
    164164    if [ ! X${orchidee_UserChoices_VEGET_UPDATE} = X ] ; then 
    165         IGCM_comp_modifyDefFile blocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE} 
    166     else 
    167         IGCM_comp_modifyDefFile blocker orchidee.def VEGET_UPDATE 0Y 
     165        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE} 
     166    else 
     167        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y 
    168168    fi 
    169169    if [ ! X${orchidee_UserChoices_LAND_COVER_CHANGE} = X ] ; then 
    170         IGCM_comp_modifyDefFile blocker orchidee.def LAND_COVER_CHANGE ${orchidee_UserChoices_LAND_COVER_CHANGE} 
    171     else 
    172         IGCM_comp_modifyDefFile blocker orchidee.def LAND_COVER_CHANGE n 
     170        IGCM_comp_modifyDefFile nonblocker orchidee.def LAND_COVER_CHANGE ${orchidee_UserChoices_LAND_COVER_CHANGE} 
     171    else 
     172        IGCM_comp_modifyDefFile nonblocker orchidee.def LAND_COVER_CHANGE n 
    173173    fi 
    174174 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_CWRR

    r2346 r2410  
    11# 
    22#************************************************************************** 
    3 #                    Namelist for ORCHIDEE 
    4 #************************************************************************** 
    5 # 
    6 # 
    7 #************************************************************************** 
    8 #          OPTIONS NOT SET 
    9 #************************************************************************** 
    10 # 
    11 # 
    12 #************************************************************************** 
    13 #          Management of display in the run of ORCHIDEE 
     3#                    Parameter file list for ORCHIDEE 
    144#************************************************************************** 
    155 
    16 # Model chatting level 
    17 # level of online diagnostics in STOMATE (0-4) 
    18 # With this variable, you can determine how much online information STOMATE 
    19 #  gives during the run. 0 means virtually no info. 
    20 BAVARD = 1 
     6# Input and output 
     7#************************************************************************** 
     8# Restart the time from the GCM.  
     9# default = n 
     10SECHIBA_reset_time = y 
     11 
     12# Name of restart to read for initial conditions 
     13# default = NONE 
     14SECHIBA_restart_in = _AUTOBLOCKER_ 
     15 
     16# Name of restart to read for initial conditions of STOMATE 
     17# default = NONE 
     18STOMATE_RESTART_FILEIN = _AUTOBLOCKER_ 
     19 
     20# Use XIOS for writing diagnostics file 
     21# defulat = n 
     22XIOS_ORCHIDEE_OK = _AUTO_ 
     23 
     24# Flag to activate sechiba_out_2.nc history file for SECHIBA 
     25# default  = FALSE 
     26SECHIBA_HISTFILE2 = _AUTO_ 
     27 
     28# SECHIBA history output level (0..10) 
     29# default = 5 
     30SECHIBA_HISTLEVEL = _AUTO_ 
     31 
     32# SECHIBA history 2 output level (0..10) 
    2133# default = 1 
     34SECHIBA_HISTLEVEL2 = _AUTO_ 
    2235 
    23 # Flag for debug information 
    24 # This option allows to switch on the output of debug 
    25 #         information without recompiling the code. 
    26 DEBUG_INFO = n 
    27 #default = n 
     36# STOMATE history output level (0..10) 
     37# default = 10 
     38STOMATE_HISTLEVEL = _AUTO_ 
    2839 
    29 # ORCHIDEE will print more messages 
    30 # This flag permits to print more debug messages in the run. 
    31 LONGPRINT = n 
    32 #default = n 
     40# Writefrequency in seconds in sechiba_history.nc 
     41# default = 86400.0 
     42WRITE_STEP = _AUTO_ 
    3343 
    34 #--------------------------------------------------------------------- 
     44# Writefrequency in seconds sechiba_out_2.nc  
     45# default = 1800.0 
     46WRITE_STEP2 = _AUTO_ 
    3547 
    36 # To reset the time coming from SECHIBA restart file 
    37 # This option allows the model to override the time 
    38 #  found in the restart file of SECHIBA with the time 
    39 #  of the first call. That is the restart time of the GCM. 
    40 SECHIBA_reset_time = y 
     48# Writefrequency in days in stomate_history.nc 
     49# default = 10. 
     50STOMATE_HIST_DT = _AUTO_ 
     51 
     52# Writefrequency in days or -1 for monthly output in stomate_ipcc_history.nc 
     53# default = 0. 
     54STOMATE_IPCC_HIST_DT = -1 
     55 
     56 
     57# Hydrology parameters 
     58#************************************************************************** 
     59# Activate the multi-layer diffusion scheme adapted from CWRR 
     60# by default the Choisnel hydrology is used. 
    4161# default = n 
     62HYDROL_CWRR = y 
     63 
     64# Total depth of soil reservoir 
     65# default = 2./4. depending on HYDROL_CWRR 
     66HYDROL_SOIL_DEPTH = 2. 
     67 
     68# Root profile 
     69HYDROL_HUMCSTE = 5.0, 0.8, 0.8, 1.0, 0.8, 0.8, 1.0, 1.0, 0.8, 4.0, 4.0, 4.0, 4.0  
     70 
     71# Activate river routing 
     72# default = n 
     73RIVER_ROUTING = y 
     74 
    4275 
    4376#************************************************************************** 
    44 #          Files : incoming / forcing / restart /output 
    45 #************************************************************************** 
    46 # Ancillary files : 
    47 #--------------------------------------------------------------------- 
     77# Activate Stomate component 
     78# default = n 
     79STOMATE_OK_STOMATE = _AUTOBLOCKER_  
    4880 
    49 # Name of file from which the vegetation map is to be read 
    50 # If !IMPOSE_VEG 
    51 # If LAND_USE  
    52 #   default = pft_new.nc 
    53 #   The name of the file to be opened to read a vegetation 
    54 #   map (in pft) is to be given here.  
    55 # If !LAND_USE 
    56 #   default = ../surfmap/carteveg5km.nc 
    57 #   The name of the file to be opened to read the vegetation 
    58 #   map is to be given here. Usualy SECHIBA runs with a 5kmx5km 
    59 #   map which is derived from the IGBP one. We assume that we have 
    60 #   a classification in 87 types. This is Olson modified by Viovy. 
    61 VEGETATION_FILE = PFTmap.nc 
     81# Activate calculations of CO2 according to Farqhuar and Ball 
     82# default = n 
     83STOMATE_OK_CO2 = y 
    6284 
    63  
    64 # Name of file from which the bare soil albedo 
    65 # If !IMPOSE_AZE 
    66 # The name of the file to be opened to read the soil types from  
    67 #  which we derive then the bare soil albedos. This file is 1x1  
    68 #  deg and based on the soil colors defined by Wilson and Henderson-Seller. 
    69 SOILALB_FILE = soils_param.nc 
    70 # default = ../surfmap/soils_param.nc 
    71  
    72 # Name of file from which soil types are read 
    73 # If !IMPOSE_VEG 
    74 # The name of the file to be opened to read the soil types.  
    75 #  The data from this file is then interpolated to the grid of 
    76 #  of the model. The aim is to get fractions for sand loam and 
    77 #  clay in each grid box. This information is used for soil hydrology 
    78 #  and respiration. 
    79 #  This parameter change name in newer ORCHIDEE versions; SOILTYPE_FILE=>SOILCLASS_FILE 
    80 SOILTYPE_FILE = soils_param.nc 
    81 SOILCLASS_FILE= soils_param.nc 
    82 # default = ../surfmap/soils_param.nc 
    83  
    84 # Name of file from which the reference 
    85 # The name of the file to be opened to read 
    86 #  temperature is read 
    87 #  the reference surface temperature. 
    88 #  The data from this file is then interpolated 
    89 #  to the grid of the model. 
    90 #  The aim is to get a reference temperature either 
    91 #  to initialize the corresponding prognostic model 
    92 #  variable correctly (ok_dgvm = TRUE) or to impose it 
    93 #  as boundary condition (ok_dgvm = FALSE) 
    94 REFTEMP_FILE = reftemp.nc 
    95 # default = reftemp.nc 
    96  
    97 # Name of file containg information about topography. 
    98 TOPOGRAPHY_FILE =cartepente2d_15min.nc 
    99  
    100 # Input and output restart file for SECHIBA : 
    101 #--------------------------------------------------------------------- 
    102  
    103 # Name of restart to READ for initial conditions 
    104 # This is the name of the file which will be opened 
    105 #  to extract the initial values of all prognostic 
    106 #  values of the model. This has to be a netCDF file. 
    107 #  Not truly COADS compliant. NONE will mean that 
    108 #  no restart file is to be expected. 
    109 SECHIBA_restart_in = _AUTO_ 
    110 # default = NONE 
    111  
    112 # Name of restart files to be created by SECHIBA 
    113 # This variable give the name for the restart files.  
    114 #  The restart software within IOIPSL will add .nc if needed. 
    115 SECHIBA_rest_out = sechiba_rest_out.nc 
    116 # default = sechiba_rest_out.nc 
    117  
    118 # Input and output restart file for STOMATE : 
    119 #--------------------------------------------------------------------- 
    120  
    121 # Name of restart to READ for initial conditions of STOMATE 
    122 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    123 # This is the name of the file which will be opened of STOMATE 
    124 #   to extract the initial values of all prognostic values of STOMATE. 
    125 STOMATE_RESTART_FILEIN = _AUTO_ 
    126 # default = NONE 
    127  
    128 # Name of restart files to be created by STOMATE 
    129 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    130 # This is the name of the file which will be opened 
    131 #        to write the final values of all prognostic values 
    132 #        of STOMATE. 
    133 STOMATE_RESTART_FILEOUT = stomate_rest_out.nc 
    134 # default = stomate_restart.nc 
    135  
    136 # Forcing files for TESTSTOMATE and FORCESOIL 
    137 #--------------------------------------------------------------------- 
    138  
    139 # Name of STOMATE's forcing file 
    140 # Name that will be given to STOMATE's offline forcing file 
    141 #STOMATE_FORCING_NAME = stomate_forcing.nc 
    142 #default = NONE 
    143  
    144 # Size of STOMATE forcing data in memory (MB) 
    145 # This variable determines how many 
    146 #  forcing states will be kept in memory. 
    147 #  Must be a compromise between memory 
    148 #  use and frequeny of disk access. 
    149 STOMATE_FORCING_MEMSIZE = 50 
    150 # default = 50 
    151  
    152 # Name of STOMATE's carbon forcing file 
    153 # Name that will be given to STOMATE's carbon offline forcing file 
    154 #STOMATE_CFORCING_NAME = stomate_Cforcing.nc 
    155 # default = NONE 
    156  
    157  
    158 # Produced forcing file name (SECHIBA puis STOMATE) : 
    159 #--------------------------------------------------------------------- 
    160  
    161 # ORCHIDEE will write out its forcing to a file 
    162 # This flag allows to write to a file all the variables 
    163 #  which are used to force the land-surface. The file  
    164 #  has exactly the same format than a normal off-line forcing 
    165 #  and thus this forcing can be used for forcing ORCHIDEE. 
    166 #ORCHIDEE_WATCHOUT = y 
    167 # default = n 
    168  
    169 # Filenane for the ORCHIDEE forcing file 
    170 # If ORCHIDEE_WATCHOUT 
    171 # This is the name of the file in which the 
    172 #  forcing used here will be written for later use.  
    173 WATCHOUT_FILE = orchidee_watchout.nc 
    174 # default = orchidee_watchout.nc 
    175  
    176 # ORCHIDEE will write out with this frequency 
    177 # If ORCHIDEE_WATCHOUT 
    178 # This flag indicates the frequency of the write of the variables.  
    179 DT_WATCHOUT = 1800 
    180 # default = dt 
    181  
    182 # STOMATE does minimum service 
    183 # set to TRUE if you want STOMATE to read 
    184 #  and write its start files and keep track 
    185 #  of longer-term biometeorological variables. 
    186 #  This is useful if OK_STOMATE is not set, 
    187 #  but if you intend to activate STOMATE later. 
    188 #  In that case, this run can serve as a  
    189 #  spinup for longer-term biometeorological 
    190 #  variables. 
    191 #STOMATE_WATCHOUT = y 
    192 # default = n 
    193  
    194 # Output file name (SECHIBA and STOMATE) : 
    195 #--------------------------------------------------------------------- 
    196 # Name of file in which the output is going 
    197 # This file is going to be created by the model 
    198 #  to be written 
    199 #  and will contain the output from the model. 
    200 #  This file is a truly COADS compliant netCDF file. 
    201 #  It will be generated by the hist software from 
    202 #  the IOIPSL package. 
    203 OUTPUT_FILE = sechiba_history.nc 
    204 # default = cabauw_out.nc 
    205  
    206 # Flag to switch on histfile 2 for SECHIBA (hi-frequency ?) 
    207 # This Flag switch on the second SECHIBA writing for hi (or low)  
    208 #  frequency writing. This second output is optional and not written 
    209 #  by default. 
    210 SECHIBA_HISTFILE2 = _AUTO_ 
    211 # default  = FALSE 
    212  
    213 # Name of file in which the output number 2 is going 
    214 #   to be written 
    215 # If SECHIBA_HISTFILE2 
    216 # This file is going to be created by the model 
    217 #   and will contain the output 2 from the model. 
    218 SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc 
    219 # default  = sechiba_out_2.nc 
    220  
    221 # Name of file in which STOMATE's output is going to be written 
    222 # This file is going to be created by the model 
    223 #  and will contain the output from the model. 
    224 #  This file is a truly COADS compliant netCDF file. 
    225 #  It will be generated by the hist software from 
    226 #  the IOIPSL package. 
    227 STOMATE_OUTPUT_FILE = stomate_history.nc 
    228 # default = stomate_history.nc 
    229  
    230 # Write levels for outputs files (number of variables) : 
    231 #--------------------------------------------------------------------- 
    232  
    233 # SECHIBA history output level (0..10) 
    234 # Chooses the list of variables in the history file.  
    235 #  Values between 0: nothing is written; 10: everything is  
    236 #  written are available More details can be found on the web under documentation. 
    237 #  web under documentation. 
    238 SECHIBA_HISTLEVEL = _AUTO_ 
    239 # default = 5 
    240  
    241 # SECHIBA history 2 output level (0..10) 
    242 # If SECHIBA_HISTFILE2 
    243 # Chooses the list of variables in the history file.  
    244 #   Values between 0: nothing is written; 10: everything is  
    245 #   written are available More details can be found on the web under documentation. 
    246 #   web under documentation. 
    247 # First level contains all ORCHIDEE outputs. 
    248 SECHIBA_HISTLEVEL2 = _AUTO_ 
    249 # default = 1 
    250  
    251 # STOMATE history output level (0..10) 
    252 #  0: nothing is written; 10: everything is written 
    253 STOMATE_HISTLEVEL = _AUTO_ 
    254 # default = 10 
    255  
    256 #-------------------------------------------------------------------- 
    257 # STOMATE_IPCC_OUTPUT_FILE 
    258 # This file is going to be created by the model 
    259 #    and will contain the output from the model. 
    260 #    This file is a truly COADS compliant netCDF file. 
    261 #    It will be generated by the hist software from 
    262 #    the IOIPSL package. 
    263 # Name of file in which STOMATE's output is going 
    264 # to be written 
    265 STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc 
    266 # default = stomate_ipcc_history.nc 
    267  
    268 # STOMATE_IPCC_HIST_DT 
    269 # Time step of the STOMATE IPCC history file 
    270 # STOMATE IPCC history time step (d) 
    271 STOMATE_IPCC_HIST_DT = -1 
    272 # default = 0. 
    273  
    274 # Write frequency for output files (SECHIBA in seconds et 
    275 # STOMATE in days) : 
    276 #--------------------------------------------------------------------- 
    277 # Frequency in seconds at which to WRITE output 
    278 # This variables gives the frequency the output of 
    279 #  the model should be written into the netCDF file. 
    280 #  It does not affect the frequency at which the 
    281 #  operations such as averaging are done. 
    282 WRITE_STEP = _AUTO_ 
    283 # default = 86400.0 
    284  
    285 # Frequency in seconds at which to WRITE output 
    286 # If SECHIBA_HISTFILE2 
    287 # This variables gives the frequency the output 2 of 
    288 #   the model should be written into the netCDF file. 
    289 #   It does not affect the frequency at which the 
    290 #   operations such as averaging are done. 
    291 #   That is IF the coding of the calls to histdef 
    292 #   are correct ! 
    293 WRITE_STEP2 = _AUTO_ 
    294 # default = 1800.0 
    295  
    296 # STOMATE history time step (d) 
    297 # Time step of the STOMATE history file 
    298 # Care : this variable must be higher than DT_SLOW 
    299 STOMATE_HIST_DT = _AUTO_ 
    300 # default = 10. 
    301  
    302 #--------------------------------------------------------------------- 
    303 # FORCESOIL CARBON spin up parametrization 
    304 #--------------------------------------------------------------------- 
    305  
    306 # Number of time steps per year for carbon spinup. 
    307 FORCESOIL_STEP_PER_YEAR = 12 
    308 # default = 12 
    309  
    310 # Number of years saved for carbon spinup. 
    311 FORCESOIL_NB_YEAR = 1 
    312 # default = 1 
    313  
    314 #--------------------------------------------------------------------- 
    315 # Parametrization : 
    316 #--------------------------------------------------------------------- 
    317  
    318 # Activate STOMATE? 
    319 # set to TRUE if STOMATE is to be activated 
    320 # STOMATE_OK_STOMATE will be set to y or n by orchidee.driver depending on activation of stomate component SBG in config.card 
    321 STOMATE_OK_STOMATE = _AUTO_  
    322 # default = n 
    323  
    324 # Activate DGVM? 
    325 # set to TRUE if Dynamic Vegetation DGVM is to be activated 
    326 STOMATE_OK_DGVM = n 
    327 # default = n 
    328  
    329 # Activate CO2? 
    330 # set to TRUE if photosynthesis is to be activated 
    331 STOMATE_OK_CO2 = y 
    332 # default = n 
    333  
    334 # Flag to force the value of atmospheric CO2 for vegetation. 
    335 # If this flag is set to true, the ATM_CO2 parameter is used 
    336 #  to prescribe the atmospheric CO2. 
    337 # This Flag is only use in couple mode. 
    338 FORCE_CO2_VEG = FALSE 
    339 # default = FALSE 
    340  
    341 # Value for atm CO2. 
    342 # If FORCE_CO2_VEG (in not forced mode) 
    343 # Value to prescribe the atm CO2. 
    344 #  For pre-industrial simulations, the value is 286.2 . 
    345 #  348. for 1990 year. 
    346 ATM_CO2 = 350. 
    347 # default = 350. 
    348  
    349 # constant tree mortality 
    350 # If yes, then a constant mortality is applied to trees.  
    351 #  Otherwise, mortality is a function of the trees'  
    352 #  vigour (as in LPJ). 
    353 LPJ_GAP_CONST_MORT = y 
    354 # default = y 
    355  
    356 # no fire allowed 
    357 # With this variable, you can allow or not 
    358 #  the estimation of CO2 lost by fire 
    359 FIRE_DISABLE = n 
    360 # default = n 
    361  
    362 # Average method for z0 
    363 # If this flag is set to true (y) then the neutral Cdrag 
    364 #  is averaged instead of the log(z0). This should be 
    365 #  the prefered option. We still wish to keep the other 
    366 #  option so we can come back if needed. If this is 
    367 #  desired then one should set Z0CDRAG_AVE = n 
    368 Z0CDRAG_AVE = y 
    369 # default = y 
    370  
    371 # parameters describing the surface (vegetation + soil) : 
    372 #--------------------------------------------------------------------- 
    373 # 
    374 # Should the vegetation be prescribed 
    375 # This flag allows the user to impose a vegetation distribution 
    376 #  and its characterisitcs. It is espacially interesting for 0D 
    377 #  simulations. On the globe it does not make too much sense as 
    378 #  it imposes the same vegetation everywhere 
    379 IMPOSE_VEG = n 
    380 # default = n 
    381  
    382 # Flag to use old "interpolation" of vegetation map. 
    383 # IF NOT IMPOSE_VEG and NOT LAND_USE 
    384 #  If you want to recover the old (ie orchidee_1_2 branch)  
    385 #   "interpolation" of vegetation map. 
    386 SLOWPROC_VEGET_OLD_INTERPOL = n 
    387 # default = n 
    388  
    389 # Vegetation distribution within the mesh (0-dim mode) 
    390 # If IMPOSE_VEG 
    391 # The fraction of vegetation is read from the restart file. If 
    392 #  it is not found there we will use the values provided here. 
    393 SECHIBA_VEG__01 = 0.2 
    394 SECHIBA_VEG__02 = 0.0 
    395 SECHIBA_VEG__03 = 0.0 
    396 SECHIBA_VEG__04 = 0.0 
    397 SECHIBA_VEG__05 = 0.0 
    398 SECHIBA_VEG__06 = 0.0 
    399 SECHIBA_VEG__07 = 0.0 
    400 SECHIBA_VEG__08 = 0.0 
    401 SECHIBA_VEG__09 = 0.0 
    402 SECHIBA_VEG__10 = 0.8 
    403 SECHIBA_VEG__11 = 0.0 
    404 SECHIBA_VEG__12 = 0.0 
    405 SECHIBA_VEG__13 = 0.0 
    406 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    407  
    408 # Maximum vegetation distribution within the mesh (0-dim mode) 
    409 # If IMPOSE_VEG 
    410 # The fraction of vegetation is read from the restart file. If 
    411 #  it is not found there we will use the values provided here. 
    412 SECHIBA_VEGMAX__01 = 0.2 
    413 SECHIBA_VEGMAX__02 = 0.0 
    414 SECHIBA_VEGMAX__03 = 0.0 
    415 SECHIBA_VEGMAX__04 = 0.0 
    416 SECHIBA_VEGMAX__05 = 0.0 
    417 SECHIBA_VEGMAX__06 = 0.0 
    418 SECHIBA_VEGMAX__07 = 0.0 
    419 SECHIBA_VEGMAX__08 = 0.0 
    420 SECHIBA_VEGMAX__09 = 0.0 
    421 SECHIBA_VEGMAX__10 = 0.8 
    422 SECHIBA_VEGMAX__11 = 0.0 
    423 SECHIBA_VEGMAX__12 = 0.0 
    424 SECHIBA_VEGMAX__13 = 0.0 
    425 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    426  
    427 # LAI for all vegetation types (0-dim mode) 
    428 # If IMPOSE_VEG 
    429 # The maximum LAI used in the 0dim mode. The values should be found 
    430 #  in the restart file. The new values of LAI will be computed anyway 
    431 #  at the end of the current day. The need for this variable is caused 
    432 #  by the fact that the model may stop during a day and thus we have not 
    433 #  yet been through the routines which compute the new surface conditions. 
    434 SECHIBA_LAI__01 = 0. 
    435 SECHIBA_LAI__02 = 8. 
    436 SECHIBA_LAI__03 = 8. 
    437 SECHIBA_LAI__04 = 4. 
    438 SECHIBA_LAI__05 = 4.5 
    439 SECHIBA_LAI__06 = 4.5 
    440 SECHIBA_LAI__07 = 4. 
    441 SECHIBA_LAI__08 = 4.5 
    442 SECHIBA_LAI__09 = 4. 
    443 SECHIBA_LAI__10 = 2. 
    444 SECHIBA_LAI__11 = 2. 
    445 SECHIBA_LAI__12 = 2. 
    446 SECHIBA_LAI__13 = 2. 
    447 # default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2. 
    448  
    449 # Height for all vegetation types (m) 
    450 # If IMPOSE_VEG 
    451 # The height used in the 0dim mode. The values should be found 
    452 #  in the restart file. The new values of height will be computed anyway 
    453 #  at the end of the current day. The need for this variable is caused 
    454 #  by the fact that the model may stop during a day and thus we have not 
    455 #  yet been through the routines which compute the new surface conditions. 
     85# Prescribed height of vegetation 
     86# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    45687SLOWPROC_HEIGHT__01 = 0. 
    45788SLOWPROC_HEIGHT__02 = 50. 
     
    46798SLOWPROC_HEIGHT__12 = .4 
    46899SLOWPROC_HEIGHT__13 = .4 
    469 # default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    470100 
    471  
    472 # Fraction of the 3 soil types (0-dim mode) 
    473 # If IMPOSE_VEG 
    474 # Determines the fraction for the 3 soil types 
    475 #  in the mesh in the following order : sand loam and clay. 
    476 SOIL_FRACTIONS__01 = 0.28 
    477 SOIL_FRACTIONS__02 = 0.52 
    478 SOIL_FRACTIONS__03 = 0.20 
    479 # default = 0.28, 0.52, 0.20 
    480  
    481 # Fraction of other surface types within the mesh (0-dim mode) 
    482 # If IMPOSE_VEG 
    483 # The fraction of ice, lakes, etc. is read from the restart file. If 
    484 #  it is not found there we will use the values provided here. 
    485 #  For the moment, there is only ice. 
    486 SECHIBA_FRAC_NOBIO = 0.0 
    487 # default = 0.0 
    488  
    489 # Fraction of the clay fraction (0-dim mode) 
    490 # If IMPOSE_VEG 
    491 # Determines the fraction of clay in the grid box. 
    492 CLAY_FRACTION = 0.2 
    493 # default = 0.2 
    494  
    495 # Should the surface parameters be prescribed 
    496 # This flag allows the user to impose the surface parameters 
    497 #  (Albedo Roughness and Emissivity). It is espacially interesting for 0D 
    498 #  simulations. On the globe it does not make too much sense as 
    499 #  it imposes the same vegetation everywhere 
    500 IMPOSE_AZE = n 
    501 # default = n 
    502  
    503 # Emissivity of the surface for LW radiation 
    504 # If IMPOSE_AZE 
    505 # The surface emissivity used for compution the LE emission 
    506 #  of the surface in a 0-dim version. Values range between  
    507 #  0.97 and 1.. The GCM uses 0.98. 
    508 CONDVEG_EMIS = 1.0 
    509 # default = 1.0 
    510  
    511 # SW visible albedo for the surface 
    512 # If IMPOSE_AZE 
    513 # Surface albedo in visible wavelengths to be used  
    514 #  on the point if a 0-dim version of SECHIBA is used.  
    515 #  Look at the description of the forcing data for  
    516 #  the correct value. 
    517 CONDVEG_ALBVIS = 0.25 
    518 # default = 0.25 
    519  
    520 # SW near infrared albedo for the surface 
    521 # If IMPOSE_AZE 
    522 # Surface albedo in near infrared wavelengths to be used  
    523 #  on the point if a 0-dim version of SECHIBA is used.  
    524 #  Look at the description of the forcing data for  
    525 #  the correct value. 
    526 CONDVEG_ALBNIR = 0.25 
    527 # default = 0.25 
    528  
    529 # Surface roughness (m) 
    530 # If IMPOSE_AZE 
    531 # Surface rougness to be used on the point if a 0-dim version 
    532 #  of SECHIBA is used. Look at the description of the forcing   
    533 #  data for the correct value. 
    534 CONDVEG_Z0 = 0.15 
    535 # default = 0.15_stnd 
    536  
    537 # Height to be added to the height of the first level (m) 
    538 # If IMPOSE_AZE 
    539 # ORCHIDEE assumes that the atmospheric level height is counted 
    540 #  from the zero wind level. Thus to take into account the roughness 
    541 #  of tall vegetation we need to correct this by a certain fraction 
    542 #  of the vegetation height. This is called the roughness height in 
    543 #  ORCHIDEE talk. 
    544 ROUGHHEIGHT = 0.0 
    545 # default = 0.0 
    546  
    547 # The snow albedo used by SECHIBA 
    548 # This option allows the user to impose a snow albedo. 
    549 #  Default behaviour is to use the model of snow albedo 
    550 #  developed by Chalita (1993). 
    551 CONDVEG_SNOWA = default 
    552 # default = use the model of snow albedo developed by Chalita 
    553  
    554 # Switch bare soil albedo dependent (if TRUE) on soil wetness 
    555 # If TRUE, the model for bare soil albedo is the old formulation. 
    556 #  Then it depend on the soil dry or wetness. If FALSE, it is the  
    557 #  new computation that is taken, it is only function of soil color. 
    558 ALB_BARE_MODEL = FALSE 
    559 # default = FALSE 
    560  
    561 # Initial snow mass if not found in restart 
    562 # The initial value of snow mass if its value is not found 
    563 #   in the restart file. This should only be used if the model is  
    564 #   started without a restart file. 
    565 HYDROL_SNOW = 0.0 
    566 # default = 0.0 
    567  
    568  
    569 # Initial snow age if not found in restart 
    570 # The initial value of snow age if its value is not found 
    571 #  in the restart file. This should only be used if the model is  
    572 #  started without a restart file. 
    573 HYDROL_SNOWAGE = 0.0 
    574 # default = 0.0 
    575  
    576 # Initial snow amount on ice, lakes, etc. if not found in restart 
    577 # The initial value of snow if its value is not found 
    578 #  in the restart file. This should only be used if the model is  
    579 #  started without a restart file. 
    580 HYDROL_SNOW_NOBIO = 0.0 
    581 # default = 0.0 
    582  
    583 # Initial snow age on ice, lakes, etc. if not found in restart 
    584 # The initial value of snow age if its value is not found 
    585 #  in the restart file. This should only be used if the model is  
    586 #  started without a restart file. 
    587 HYDROL_SNOW_NOBIO_AGE = 0.0 
    588 # default = 0.0 
    589  
    590 # Initial soil moisture stress if not found in restart 
    591 # The initial value of soil moisture stress if its value is not found 
    592 #  in the restart file. This should only be used if the model is  
    593 #  started without a restart file. 
    594 HYDROL_HUMR = 1.0 
    595 # default = 1.0 
    596  
    597 # Total depth of soil reservoir 
    598 HYDROL_SOIL_DEPTH = 2. 
    599 # default = 2. 
    600  
    601 # Root profile 
    602 # Default values were defined for 2 meters soil depth. 
    603 # For 4 meters soil depth, you may use those ones : 
    604 # 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
    605 HYDROL_HUMCSTE= 5.0, 0.8, 0.8, 1.0, 0.8, 0.8, 1.0, 1.0, 0.8, 4.0, 4.0, 4.0, 4.0  
    606 # default =  5., .8, .8, 1., .8, .8, 1., 1., .8, 4., 4., 4., 4. 
    607  
    608 # Initial restart deep soil moisture if not found in restart 
    609 # The initial value of deep soil moisture if its value is not found 
    610 #  in the restart file. This should only be used if the model is  
    611 #  started without a restart file. Default behaviour is a saturated soil. 
    612 HYDROL_BQSB = default 
    613 # default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2 
    614  
    615 # Initial upper soil moisture if not found in restart 
    616 # The initial value of upper soil moisture if its value is not found 
    617 #  in the restart file. This should only be used if the model is  
    618 #  started without a restart file. 
    619 HYDROL_GQSB = 0.0 
    620 # default = 0.0 
    621  
    622 # Initial upper reservoir depth if not found in restart 
    623 # The initial value of upper reservoir depth if its value is not found 
    624 #  in the restart file. This should only be used if the model is  
    625 #  started without a restart file. 
    626 HYDROL_DSG = 0.0 
    627 # default = 0.0 
    628  
    629 # Initial dry soil above upper reservoir if not found in restart 
    630 # The initial value of dry soil above upper reservoir if its value  
    631 #  in the restart file. This should only be used if the model is  
    632 #  started without a restart file. The default behaviour 
    633 #  is to compute it from the variables above. Should be OK most of  
    634 #  the time. 
    635 HYDROL_DSP = default 
    636 # default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0 
    637  
    638 # Initial water on canopy if not found in restart 
    639 # The initial value of moisture on canopy if its value  
    640 #  in the restart file. This should only be used if the model is  
    641 #  started without a restart file. 
    642 HYDROL_QSV = 0.0 
    643 # default = 0.0 
    644  
    645 # Soil moisture on each soil tile and levels 
    646 # The initial value of mc if its value is not found 
    647 #  in the restart file. This should only be used if the model is  
    648 #  started without a restart file. 
    649 HYDROL_MOISTURE_CONTENT = 0.3 
    650 # default = 0.3 
    651  
    652 # US_NVM_NSTM_NSLM 
    653 # The initial value of us (relative moisture) if its value is not found 
    654 #  in the restart file. This should only be used if the model is  
    655 #  started without a restart file. 
    656 US_INIT = 0.0 
    657 # default = 0.0 
    658  
    659 # Coefficient for free drainage at bottom 
    660 # The initial value of free drainage if its value is not found 
    661 #  in the restart file. This should only be used if the model is  
    662 #  started without a restart file. 
    663 FREE_DRAIN_COEF = 1.0, 1.0, 1.0 
    664 # default = 1.0, 1.0, 1.0 
    665  
    666 # Bare soil evap on each soil if not found in restart 
    667 # The initial value of bare soils evap if its value is not found 
    668 #  in the restart file. This should only be used if the model is  
    669 #  started without a restart file. 
    670 EVAPNU_SOIL = 0.0 
    671 # default = 0.0 
    672  
    673 # Initial temperature if not found in restart 
    674 # The initial value of surface temperature if its value is not found 
    675 #  in the restart file. This should only be used if the model is  
    676 #  started without a restart file. 
    677 ENERBIL_TSURF = 280. 
    678 # default = 280. 
    679  
    680 # Initial Soil Potential Evaporation 
    681 # The initial value of soil potential evaporation if its value  
    682 #  is not found in the restart file. This should only be used if 
    683 #  the model is started without a restart file.  
    684 ENERBIL_EVAPOT = 0.0 
    685 # default = 0.0 
    686  
    687 # Initial soil temperature profile if not found in restart 
    688 # The initial value of the temperature profile in the soil if  
    689 #   its value is not found in the restart file. This should only  
    690 #   be used if the model is started without a restart file. Here 
    691 #   we only require one value as we will assume a constant  
    692 #   throughout the column. 
    693 THERMOSOIL_TPRO = 280. 
    694 # default = 280. 
    695  
    696 # Initial leaf CO2 level if not found in restart 
    697 # The initial value of leaf_ci if its value is not found 
    698 #  in the restart file. This should only be used if the model is 
    699 #  started without a restart file. 
    700 DIFFUCO_LEAFCI = 233. 
    701 # default = 233. 
    702  
    703  
    704 # Keep cdrag coefficient from gcm. 
    705 # Set to .TRUE. if you want q_cdrag coming from GCM. 
    706 #  Keep cdrag coefficient from gcm for latent and sensible heat fluxes. 
    707 #  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs). 
     101# Use cdrag coefficient from gcm 
    708102CDRAG_FROM_GCM = y 
    709 # default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE. 
    710  
    711  
    712 # Artificial parameter to increase or decrease canopy resistance 
    713 # Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin 
    714 # By PFT. 
    715 RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 
    716 # default = 1. 
    717  
    718103 
    719104# Interception reservoir coefficient. 
    720 # Transforms leaf area index into size of interception reservoir 
    721 #  for slowproc_derivvar or stomate. 
     105# default = 0.1 
    722106SECHIBA_QSINT = 0.02 
    723 # default = 0.1 
    724107 
     108# Parmeters related to vegetation map 
    725109#************************************************************************** 
    726 # LAND_USE 
    727 #************************************************************************** 
    728  
    729110# Read a land_use vegetation map 
    730 # pft values are needed, max time axis is 293 
     111# default = n 
    731112LAND_USE = y 
    732 # default = n 
    733113 
    734114# Year of the land_use vegetation map readed 
    735115# year off the pft map 
    736 # If LAND_USE (11 = 1860 - 1850 +1 for PFTmap.20C3M.nc, 1 for PFTmap_IPCC_2000.nc)  
     116# default = 282 
    737117VEGET_YEAR = 1 
    738 # default = 282 
    739118 
    740 # booleen to indicate that a new LAND USE file will be used (since 1.9.5 version). 
    741119# The parameter is used to bypass veget_year count  
    742120# and reinitialize it with VEGET_YEAR parameter. 
    743121# Then it is possible to change LAND USE file. 
    744122# If LAND_USE 
     123# default = y 
    745124VEGET_REINIT = n 
    746 # default = n 
    747125 
    748126# Update vegetation frequency (since 2.0 version) 
    749 # The veget datas will be update each this time step. 
    750 # If LAND_USE 
     127# The veget datas will be update at this period if LAND_USE 
     128# default = 1Y 
    751129VEGET_UPDATE = _AUTO_ 
    752 # default = 1Y 
    753130 
    754131# treat land use modifications 
     
    757134# deforestation.                                 
    758135# If LAND_USE 
     136# default = y 
    759137LAND_COVER_CHANGE = _AUTO_ 
    760 # default = y 
    761138 
    762 #************************************************************************** 
     139# Read reftemp file. Note behaviour and default value in the code has change in rev 2441 trunk ORCHIDEE 
     140# default=NONE 
     141REFTEMP_FILE=reftemp.nc 
    763142 
    764 # agriculture allowed? 
    765 # With this variable, you can determine 
    766 #  whether agriculture is allowed 
    767 AGRICULTURE = y 
    768 # default = y 
    769  
    770 # Harvert model for agricol PFTs. 
    771 # Compute harvest above ground biomass for agriculture. 
    772 # Change daily turnover. 
    773 HARVEST_AGRI = y 
    774 # default = y 
    775  
    776 # herbivores allowed? 
    777 # With this variable, you can activate herbivores  
    778 HERBIVORES = n 
    779 # default = n 
    780  
    781 # treat expansion of PFTs across a grid cell? 
    782 # With this variable, you can determine 
    783 #  whether we treat expansion of PFTs across a 
    784 #  grid cell. 
    785 TREAT_EXPANSION = n 
    786 # default = n 
    787  
    788 #************************************************************************** 
    789  
    790 # Time within the day simulated 
    791 # This is the time spent simulating the current day. This variable is 
    792 #  prognostic as it will trigger all the computations which are 
    793 #  only done once a day. 
    794 SECHIBA_DAY = 0.0 
    795 # default = 0.0 
    796  
    797 # Time step of STOMATE and other slow processes 
    798 # Time step (s) of regular update of vegetation 
    799 #  cover, LAI etc. This is also the time step 
    800 #  of STOMATE. 
    801 DT_SLOW = 86400. 
    802 # default = un_jour = 86400. 
    803  
    804 #************************************************************************** 
    805  
    806 # Allows to switch on the multilayer hydrology of CWRR 
    807 # This flag allows the user to decide if the vertical 
    808 #  hydrology should be treated using the multi-layer  
    809 #  diffusion scheme adapted from CWRR by Patricia de Rosnay. 
    810 #  by default the Choisnel hydrology is used. 
    811 HYDROL_CWRR = y  
    812 # default = n 
    813  
    814 # do horizontal diffusion? 
    815 # If TRUE, then water can diffuse horizontally between 
    816 #  the PFTs' water reservoirs. 
    817 HYDROL_OK_HDIFF = n 
    818 # default = n 
    819   
    820  
    821 # time scale (s) for horizontal diffusion of water 
    822 # If HYDROL_OK_HDIFF 
    823 # Defines how fast diffusion occurs horizontally between 
    824 #  the individual PFTs' water reservoirs. If infinite, no 
    825 #  diffusion. 
    826 HYDROL_TAU_HDIFF = 1800. 
    827 # default = 86400. 
    828  
    829 # Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8). 
    830 # During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall 
    831 #  will get directly to the ground without being intercepted, for each PFT.. 
    832 PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    833 # default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    834  
    835 # Decides if we route the water or not 
    836 # This flag allows the user to decide if the runoff 
    837 #  and drainage should be routed to the ocean 
    838 #  and to downstream grid boxes. 
    839 RIVER_ROUTING = y 
    840 # default = n 
    841  
    842 # Name of file which contains the routing information 
    843 # The file provided here should allow the routing module to 
    844 #  read the high resolution grid of basins and the flow direction  
    845 #  from one mesh to the other. 
    846 ROUTING_FILE = routing.nc 
    847 # default = routing.nc 
    848  
    849 # Time step of the routing scheme 
    850 # If RIVER_ROUTING 
    851 # This values gives the time step in seconds of the routing scheme.  
    852 #   It should be multiple of the main time step of ORCHIDEE. One day 
    853 #   is a good value. 
    854 ROUTING_TIMESTEP = 86400 
    855 # default = 86400 
    856  
    857 # Number of rivers  
    858 # If RIVER_ROUTING 
    859 # This parameter chooses the number of largest river basins 
    860 #  which should be treated as independently as rivers and not 
    861 #  flow into the oceans as diffusion coastal flow. 
    862 ROUTING_RIVERS = 50 
    863 # default = 50 
    864  
    865 # Should we compute an irrigation flux  
    866 # This parameters allows the user to ask the model 
    867 #  to compute an irigation flux. This performed for the 
    868 #  on very simple hypothesis. The idea is to have a good 
    869 #  map of irrigated areas and a simple function which estimates 
    870 #  the need to irrigate. 
    871 DO_IRRIGATION = n 
    872 # default = n 
    873  
    874 # Name of file which contains the map of irrigated areas 
    875 # If IRRIGATE 
    876 # The name of the file to be opened to read the field 
    877 #  with the area in m^2 of the area irrigated within each 
    878 #  0.5 0.5 deg grid box. The map currently used is the one 
    879 #  developed by the Center for Environmental Systems Research  
    880 #  in Kassel (1995). 
    881 IRRIGATION_FILE = irrigated.nc 
    882 # default = irrigated.nc 
    883  
    884 # Should we include floodplains  
    885 # This parameters allows the user to ask the model 
    886 #  to take into account the flood plains and return  
    887 #  the water into the soil moisture. It then can go  
    888 #  back to the atmopshere. This tried to simulate  
    889 #  internal deltas of rivers. 
    890 DO_FLOODPLAINS = n 
    891 # default = n 
    892  
    893 # Use XIOS for writing diagnostics file 
    894 # defulat = n 
    895 XIOS_ORCHIDEE_OK = _AUTO_ 
    896 #************************************************************************** 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_Choi

    r2346 r2410  
    11# 
    22#************************************************************************** 
    3 #                    Namelist for ORCHIDEE 
    4 #************************************************************************** 
    5 # 
    6 # 
    7 #************************************************************************** 
    8 #          OPTIONS NOT SET 
    9 #************************************************************************** 
    10 # 
    11 # 
    12 #************************************************************************** 
    13 #          Management of display in the run of ORCHIDEE 
     3#                    Parameter file list for ORCHIDEE 
    144#************************************************************************** 
    155 
    16 # Model chatting level 
    17 # level of online diagnostics in STOMATE (0-4) 
    18 # With this variable, you can determine how much online information STOMATE 
    19 #  gives during the run. 0 means virtually no info. 
    20 BAVARD = 1 
     6# Input and output 
     7#************************************************************************** 
     8# Restart the time from the GCM.  
     9# default = n 
     10SECHIBA_reset_time = y 
     11 
     12# Name of restart to read for initial conditions 
     13# default = NONE 
     14SECHIBA_restart_in = _AUTOBLOCKER_ 
     15 
     16# Name of restart to read for initial conditions of STOMATE 
     17# default = NONE 
     18STOMATE_RESTART_FILEIN = _AUTOBLOCKER_ 
     19 
     20# Use XIOS for writing diagnostics file 
     21# defulat = n 
     22XIOS_ORCHIDEE_OK = _AUTO_ 
     23 
     24# Flag to activate sechiba_out_2.nc history file for SECHIBA 
     25# default  = FALSE 
     26SECHIBA_HISTFILE2 = _AUTO_ 
     27 
     28# SECHIBA history output level (0..10) 
     29# default = 5 
     30SECHIBA_HISTLEVEL = _AUTO_ 
     31 
     32# SECHIBA history 2 output level (0..10) 
    2133# default = 1 
     34SECHIBA_HISTLEVEL2 = _AUTO_ 
    2235 
    23 # Flag for debug information 
    24 # This option allows to switch on the output of debug 
    25 #         information without recompiling the code. 
    26 DEBUG_INFO = n 
    27 #default = n 
     36# STOMATE history output level (0..10) 
     37# default = 10 
     38STOMATE_HISTLEVEL = _AUTO_ 
    2839 
    29 # ORCHIDEE will print more messages 
    30 # This flag permits to print more debug messages in the run. 
    31 LONGPRINT = n 
    32 #default = n 
     40# Writefrequency in seconds in sechiba_history.nc 
     41# default = 86400.0 
     42WRITE_STEP = _AUTO_ 
    3343 
    34 #--------------------------------------------------------------------- 
     44# Writefrequency in seconds sechiba_out_2.nc  
     45# default = 1800.0 
     46WRITE_STEP2 = _AUTO_ 
    3547 
    36 # To reset the time coming from SECHIBA restart file 
    37 # This option allows the model to override the time 
    38 #  found in the restart file of SECHIBA with the time 
    39 #  of the first call. That is the restart time of the GCM. 
    40 SECHIBA_reset_time = y 
     48# Writefrequency in days in stomate_history.nc 
     49# default = 10. 
     50STOMATE_HIST_DT = _AUTO_ 
     51 
     52# Writefrequency in days or -1 for monthly output in stomate_ipcc_history.nc 
     53# default = 0. 
     54STOMATE_IPCC_HIST_DT = -1 
     55 
     56 
     57# Hydrology parameters 
     58#************************************************************************** 
     59# Activate the multi-layer diffusion scheme adapted from CWRR 
     60# by default the Choisnel hydrology is used. 
    4161# default = n 
     62HYDROL_CWRR = n  
     63 
     64# Total depth of soil reservoir 
     65# default = 2./4. depending on HYDROL_CWRR 
     66HYDROL_SOIL_DEPTH = 4. 
     67 
     68# Root profile 
     69HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
     70 
     71# Activate river routing 
     72# default = n 
     73RIVER_ROUTING = y 
     74 
    4275 
    4376#************************************************************************** 
    44 #          Files : incoming / forcing / restart /output 
    45 #************************************************************************** 
    46 # Ancillary files : 
    47 #--------------------------------------------------------------------- 
     77# Activate Stomate component 
     78# default = n 
     79STOMATE_OK_STOMATE = _AUTOBLOCKER_  
    4880 
    49 # Name of file from which the vegetation map is to be read 
    50 # If !IMPOSE_VEG 
    51 # If LAND_USE  
    52 #   default = pft_new.nc 
    53 #   The name of the file to be opened to read a vegetation 
    54 #   map (in pft) is to be given here.  
    55 # If !LAND_USE 
    56 #   default = ../surfmap/carteveg5km.nc 
    57 #   The name of the file to be opened to read the vegetation 
    58 #   map is to be given here. Usualy SECHIBA runs with a 5kmx5km 
    59 #   map which is derived from the IGBP one. We assume that we have 
    60 #   a classification in 87 types. This is Olson modified by Viovy. 
    61 VEGETATION_FILE = PFTmap.nc 
     81# Activate calculations of CO2 according to Farqhuar and Ball 
     82# default = n 
     83STOMATE_OK_CO2 = y 
    6284 
    63  
    64 # Name of file from which the bare soil albedo 
    65 # If !IMPOSE_AZE 
    66 # The name of the file to be opened to read the soil types from  
    67 #  which we derive then the bare soil albedos. This file is 1x1  
    68 #  deg and based on the soil colors defined by Wilson and Henderson-Seller. 
    69 SOILALB_FILE = soils_param.nc 
    70 # default = ../surfmap/soils_param.nc 
    71  
    72 # Name of file from which soil types are read 
    73 # If !IMPOSE_VEG 
    74 # The name of the file to be opened to read the soil types.  
    75 #  The data from this file is then interpolated to the grid of 
    76 #  of the model. The aim is to get fractions for sand loam and 
    77 #  clay in each grid box. This information is used for soil hydrology 
    78 #  and respiration. 
    79 #  This parameter change name in newer ORCHIDEE versions; SOILTYPE_FILE=>SOILCLASS_FILE 
    80 SOILTYPE_FILE = soils_param.nc 
    81 SOILCLASS_FILE= soils_param.nc 
    82 # default = ../surfmap/soils_param.nc 
    83  
    84 # Name of file from which the reference 
    85 # The name of the file to be opened to read 
    86 #  temperature is read 
    87 #  the reference surface temperature. 
    88 #  The data from this file is then interpolated 
    89 #  to the grid of the model. 
    90 #  The aim is to get a reference temperature either 
    91 #  to initialize the corresponding prognostic model 
    92 #  variable correctly (ok_dgvm = TRUE) or to impose it 
    93 #  as boundary condition (ok_dgvm = FALSE) 
    94 REFTEMP_FILE = reftemp.nc 
    95 # default = reftemp.nc 
    96  
    97 # Name of file containg information about topography. 
    98 TOPOGRAPHY_FILE =cartepente2d_15min.nc 
    99  
    100 # Input and output restart file for SECHIBA : 
    101 #--------------------------------------------------------------------- 
    102  
    103 # Name of restart to READ for initial conditions 
    104 # This is the name of the file which will be opened 
    105 #  to extract the initial values of all prognostic 
    106 #  values of the model. This has to be a netCDF file. 
    107 #  Not truly COADS compliant. NONE will mean that 
    108 #  no restart file is to be expected. 
    109 SECHIBA_restart_in = _AUTO_ 
    110 # default = NONE 
    111  
    112 # Name of restart files to be created by SECHIBA 
    113 # This variable give the name for the restart files.  
    114 #  The restart software within IOIPSL will add .nc if needed. 
    115 SECHIBA_rest_out = sechiba_rest_out.nc 
    116 # default = sechiba_rest_out.nc 
    117  
    118 # Input and output restart file for STOMATE : 
    119 #--------------------------------------------------------------------- 
    120  
    121 # Name of restart to READ for initial conditions of STOMATE 
    122 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    123 # This is the name of the file which will be opened of STOMATE 
    124 #   to extract the initial values of all prognostic values of STOMATE. 
    125 STOMATE_RESTART_FILEIN = _AUTO_ 
    126 # default = NONE 
    127  
    128 # Name of restart files to be created by STOMATE 
    129 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    130 # This is the name of the file which will be opened 
    131 #        to write the final values of all prognostic values 
    132 #        of STOMATE. 
    133 STOMATE_RESTART_FILEOUT = stomate_rest_out.nc 
    134 # default = stomate_restart.nc 
    135  
    136 # Forcing files for TESTSTOMATE and FORCESOIL 
    137 #--------------------------------------------------------------------- 
    138  
    139 # Name of STOMATE's forcing file 
    140 # Name that will be given to STOMATE's offline forcing file 
    141 #STOMATE_FORCING_NAME = stomate_forcing.nc 
    142 #default = NONE 
    143  
    144 # Size of STOMATE forcing data in memory (MB) 
    145 # This variable determines how many 
    146 #  forcing states will be kept in memory. 
    147 #  Must be a compromise between memory 
    148 #  use and frequeny of disk access. 
    149 STOMATE_FORCING_MEMSIZE = 50 
    150 # default = 50 
    151  
    152 # Name of STOMATE's carbon forcing file 
    153 # Name that will be given to STOMATE's carbon offline forcing file 
    154 #STOMATE_CFORCING_NAME = stomate_Cforcing.nc 
    155 # default = NONE 
    156  
    157  
    158 # Produced forcing file name (SECHIBA puis STOMATE) : 
    159 #--------------------------------------------------------------------- 
    160  
    161 # ORCHIDEE will write out its forcing to a file 
    162 # This flag allows to write to a file all the variables 
    163 #  which are used to force the land-surface. The file  
    164 #  has exactly the same format than a normal off-line forcing 
    165 #  and thus this forcing can be used for forcing ORCHIDEE. 
    166 #ORCHIDEE_WATCHOUT = y 
    167 # default = n 
    168  
    169 # Filenane for the ORCHIDEE forcing file 
    170 # If ORCHIDEE_WATCHOUT 
    171 # This is the name of the file in which the 
    172 #  forcing used here will be written for later use.  
    173 WATCHOUT_FILE = orchidee_watchout.nc 
    174 # default = orchidee_watchout.nc 
    175  
    176 # ORCHIDEE will write out with this frequency 
    177 # If ORCHIDEE_WATCHOUT 
    178 # This flag indicates the frequency of the write of the variables.  
    179 DT_WATCHOUT = 1800 
    180 # default = dt 
    181  
    182 # STOMATE does minimum service 
    183 # set to TRUE if you want STOMATE to read 
    184 #  and write its start files and keep track 
    185 #  of longer-term biometeorological variables. 
    186 #  This is useful if OK_STOMATE is not set, 
    187 #  but if you intend to activate STOMATE later. 
    188 #  In that case, this run can serve as a  
    189 #  spinup for longer-term biometeorological 
    190 #  variables. 
    191 #STOMATE_WATCHOUT = y 
    192 # default = n 
    193  
    194 # Output file name (SECHIBA and STOMATE) : 
    195 #--------------------------------------------------------------------- 
    196 # Name of file in which the output is going 
    197 # This file is going to be created by the model 
    198 #  to be written 
    199 #  and will contain the output from the model. 
    200 #  This file is a truly COADS compliant netCDF file. 
    201 #  It will be generated by the hist software from 
    202 #  the IOIPSL package. 
    203 OUTPUT_FILE = sechiba_history.nc 
    204 # default = cabauw_out.nc 
    205  
    206 # Flag to switch on histfile 2 for SECHIBA (hi-frequency ?) 
    207 # This Flag switch on the second SECHIBA writing for hi (or low)  
    208 #  frequency writing. This second output is optional and not written 
    209 #  by default. 
    210 SECHIBA_HISTFILE2 = _AUTO_ 
    211 # default  = FALSE 
    212  
    213 # Name of file in which the output number 2 is going 
    214 #   to be written 
    215 # If SECHIBA_HISTFILE2 
    216 # This file is going to be created by the model 
    217 #   and will contain the output 2 from the model. 
    218 SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc 
    219 # default  = sechiba_out_2.nc 
    220  
    221 # Name of file in which STOMATE's output is going to be written 
    222 # This file is going to be created by the model 
    223 #  and will contain the output from the model. 
    224 #  This file is a truly COADS compliant netCDF file. 
    225 #  It will be generated by the hist software from 
    226 #  the IOIPSL package. 
    227 STOMATE_OUTPUT_FILE = stomate_history.nc 
    228 # default = stomate_history.nc 
    229  
    230 # Write levels for outputs files (number of variables) : 
    231 #--------------------------------------------------------------------- 
    232  
    233 # SECHIBA history output level (0..10) 
    234 # Chooses the list of variables in the history file.  
    235 #  Values between 0: nothing is written; 10: everything is  
    236 #  written are available More details can be found on the web under documentation. 
    237 #  web under documentation. 
    238 SECHIBA_HISTLEVEL = _AUTO_ 
    239 # default = 5 
    240  
    241 # SECHIBA history 2 output level (0..10) 
    242 # If SECHIBA_HISTFILE2 
    243 # Chooses the list of variables in the history file.  
    244 #   Values between 0: nothing is written; 10: everything is  
    245 #   written are available More details can be found on the web under documentation. 
    246 #   web under documentation. 
    247 # First level contains all ORCHIDEE outputs. 
    248 SECHIBA_HISTLEVEL2 = _AUTO_ 
    249 # default = 1 
    250  
    251 # STOMATE history output level (0..10) 
    252 #  0: nothing is written; 10: everything is written 
    253 STOMATE_HISTLEVEL = _AUTO_ 
    254 # default = 10 
    255  
    256 #-------------------------------------------------------------------- 
    257 # STOMATE_IPCC_OUTPUT_FILE 
    258 # This file is going to be created by the model 
    259 #    and will contain the output from the model. 
    260 #    This file is a truly COADS compliant netCDF file. 
    261 #    It will be generated by the hist software from 
    262 #    the IOIPSL package. 
    263 # Name of file in which STOMATE's output is going 
    264 # to be written 
    265 STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc 
    266 # default = stomate_ipcc_history.nc 
    267  
    268 # STOMATE_IPCC_HIST_DT 
    269 # Time step of the STOMATE IPCC history file 
    270 # STOMATE IPCC history time step (d) 
    271 STOMATE_IPCC_HIST_DT = -1 
    272 # default = 0. 
    273  
    274 # Write frequency for output files (SECHIBA in seconds et 
    275 # STOMATE in days) : 
    276 #--------------------------------------------------------------------- 
    277 # Frequency in seconds at which to WRITE output 
    278 # This variables gives the frequency the output of 
    279 #  the model should be written into the netCDF file. 
    280 #  It does not affect the frequency at which the 
    281 #  operations such as averaging are done. 
    282 WRITE_STEP = _AUTO_ 
    283 # default = 86400.0 
    284  
    285 # Frequency in seconds at which to WRITE output 
    286 # If SECHIBA_HISTFILE2 
    287 # This variables gives the frequency the output 2 of 
    288 #   the model should be written into the netCDF file. 
    289 #   It does not affect the frequency at which the 
    290 #   operations such as averaging are done. 
    291 #   That is IF the coding of the calls to histdef 
    292 #   are correct ! 
    293 WRITE_STEP2 = _AUTO_ 
    294 # default = 1800.0 
    295  
    296 # STOMATE history time step (d) 
    297 # Time step of the STOMATE history file 
    298 # Care : this variable must be higher than DT_SLOW 
    299 STOMATE_HIST_DT = _AUTO_ 
    300 # default = 10. 
    301  
    302 #--------------------------------------------------------------------- 
    303 # FORCESOIL CARBON spin up parametrization 
    304 #--------------------------------------------------------------------- 
    305  
    306 # Number of time steps per year for carbon spinup. 
    307 FORCESOIL_STEP_PER_YEAR = 12 
    308 # default = 12 
    309  
    310 # Number of years saved for carbon spinup. 
    311 FORCESOIL_NB_YEAR = 1 
    312 # default = 1 
    313  
    314 #--------------------------------------------------------------------- 
    315 # Parametrization : 
    316 #--------------------------------------------------------------------- 
    317  
    318 # Activate STOMATE? 
    319 # set to TRUE if STOMATE is to be activated 
    320 # STOMATE_OK_STOMATE will be set to y or n by orchidee.driver depending on activation of stomate component SBG in config.card 
    321 STOMATE_OK_STOMATE = _AUTO_  
    322 # default = n 
    323  
    324 # Activate DGVM? 
    325 # set to TRUE if Dynamic Vegetation DGVM is to be activated 
    326 STOMATE_OK_DGVM = n 
    327 # default = n 
    328  
    329 # Activate CO2? 
    330 # set to TRUE if photosynthesis is to be activated 
    331 STOMATE_OK_CO2 = y 
    332 # default = n 
    333  
    334 # Flag to force the value of atmospheric CO2 for vegetation. 
    335 # If this flag is set to true, the ATM_CO2 parameter is used 
    336 #  to prescribe the atmospheric CO2. 
    337 # This Flag is only use in couple mode. 
    338 FORCE_CO2_VEG = FALSE 
    339 # default = FALSE 
    340  
    341 # Value for atm CO2. 
    342 # If FORCE_CO2_VEG (in not forced mode) 
    343 # Value to prescribe the atm CO2. 
    344 #  For pre-industrial simulations, the value is 286.2 . 
    345 #  348. for 1990 year. 
    346 ATM_CO2 = 350. 
    347 # default = 350. 
    348  
    349 # constant tree mortality 
    350 # If yes, then a constant mortality is applied to trees.  
    351 #  Otherwise, mortality is a function of the trees'  
    352 #  vigour (as in LPJ). 
    353 LPJ_GAP_CONST_MORT = y 
    354 # default = y 
    355  
    356 # no fire allowed 
    357 # With this variable, you can allow or not 
    358 #  the estimation of CO2 lost by fire 
    359 FIRE_DISABLE = n 
    360 # default = n 
    361  
    362 # Average method for z0 
    363 # If this flag is set to true (y) then the neutral Cdrag 
    364 #  is averaged instead of the log(z0). This should be 
    365 #  the prefered option. We still wish to keep the other 
    366 #  option so we can come back if needed. If this is 
    367 #  desired then one should set Z0CDRAG_AVE = n 
    368 Z0CDRAG_AVE = y 
    369 # default = y 
    370  
    371 # parameters describing the surface (vegetation + soil) : 
    372 #--------------------------------------------------------------------- 
    373 # 
    374 # Should the vegetation be prescribed 
    375 # This flag allows the user to impose a vegetation distribution 
    376 #  and its characterisitcs. It is espacially interesting for 0D 
    377 #  simulations. On the globe it does not make too much sense as 
    378 #  it imposes the same vegetation everywhere 
    379 IMPOSE_VEG = n 
    380 # default = n 
    381  
    382 # Flag to use old "interpolation" of vegetation map. 
    383 # IF NOT IMPOSE_VEG and NOT LAND_USE 
    384 #  If you want to recover the old (ie orchidee_1_2 branch)  
    385 #   "interpolation" of vegetation map. 
    386 SLOWPROC_VEGET_OLD_INTERPOL = n 
    387 # default = n 
    388  
    389 # Vegetation distribution within the mesh (0-dim mode) 
    390 # If IMPOSE_VEG 
    391 # The fraction of vegetation is read from the restart file. If 
    392 #  it is not found there we will use the values provided here. 
    393 SECHIBA_VEG__01 = 0.2 
    394 SECHIBA_VEG__02 = 0.0 
    395 SECHIBA_VEG__03 = 0.0 
    396 SECHIBA_VEG__04 = 0.0 
    397 SECHIBA_VEG__05 = 0.0 
    398 SECHIBA_VEG__06 = 0.0 
    399 SECHIBA_VEG__07 = 0.0 
    400 SECHIBA_VEG__08 = 0.0 
    401 SECHIBA_VEG__09 = 0.0 
    402 SECHIBA_VEG__10 = 0.8 
    403 SECHIBA_VEG__11 = 0.0 
    404 SECHIBA_VEG__12 = 0.0 
    405 SECHIBA_VEG__13 = 0.0 
    406 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    407  
    408 # Maximum vegetation distribution within the mesh (0-dim mode) 
    409 # If IMPOSE_VEG 
    410 # The fraction of vegetation is read from the restart file. If 
    411 #  it is not found there we will use the values provided here. 
    412 SECHIBA_VEGMAX__01 = 0.2 
    413 SECHIBA_VEGMAX__02 = 0.0 
    414 SECHIBA_VEGMAX__03 = 0.0 
    415 SECHIBA_VEGMAX__04 = 0.0 
    416 SECHIBA_VEGMAX__05 = 0.0 
    417 SECHIBA_VEGMAX__06 = 0.0 
    418 SECHIBA_VEGMAX__07 = 0.0 
    419 SECHIBA_VEGMAX__08 = 0.0 
    420 SECHIBA_VEGMAX__09 = 0.0 
    421 SECHIBA_VEGMAX__10 = 0.8 
    422 SECHIBA_VEGMAX__11 = 0.0 
    423 SECHIBA_VEGMAX__12 = 0.0 
    424 SECHIBA_VEGMAX__13 = 0.0 
    425 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    426  
    427 # LAI for all vegetation types (0-dim mode) 
    428 # If IMPOSE_VEG 
    429 # The maximum LAI used in the 0dim mode. The values should be found 
    430 #  in the restart file. The new values of LAI will be computed anyway 
    431 #  at the end of the current day. The need for this variable is caused 
    432 #  by the fact that the model may stop during a day and thus we have not 
    433 #  yet been through the routines which compute the new surface conditions. 
    434 SECHIBA_LAI__01 = 0. 
    435 SECHIBA_LAI__02 = 8. 
    436 SECHIBA_LAI__03 = 8. 
    437 SECHIBA_LAI__04 = 4. 
    438 SECHIBA_LAI__05 = 4.5 
    439 SECHIBA_LAI__06 = 4.5 
    440 SECHIBA_LAI__07 = 4. 
    441 SECHIBA_LAI__08 = 4.5 
    442 SECHIBA_LAI__09 = 4. 
    443 SECHIBA_LAI__10 = 2. 
    444 SECHIBA_LAI__11 = 2. 
    445 SECHIBA_LAI__12 = 2. 
    446 SECHIBA_LAI__13 = 2. 
    447 # default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2. 
    448  
    449 # Height for all vegetation types (m) 
    450 # If IMPOSE_VEG 
    451 # The height used in the 0dim mode. The values should be found 
    452 #  in the restart file. The new values of height will be computed anyway 
    453 #  at the end of the current day. The need for this variable is caused 
    454 #  by the fact that the model may stop during a day and thus we have not 
    455 #  yet been through the routines which compute the new surface conditions. 
     85# Prescribed height of vegetation 
     86# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    45687SLOWPROC_HEIGHT__01 = 0. 
    45788SLOWPROC_HEIGHT__02 = 50. 
     
    46798SLOWPROC_HEIGHT__12 = .4 
    46899SLOWPROC_HEIGHT__13 = .4 
    469 # default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    470100 
    471  
    472 # Fraction of the 3 soil types (0-dim mode) 
    473 # If IMPOSE_VEG 
    474 # Determines the fraction for the 3 soil types 
    475 #  in the mesh in the following order : sand loam and clay. 
    476 SOIL_FRACTIONS__01 = 0.28 
    477 SOIL_FRACTIONS__02 = 0.52 
    478 SOIL_FRACTIONS__03 = 0.20 
    479 # default = 0.28, 0.52, 0.20 
    480  
    481 # Fraction of other surface types within the mesh (0-dim mode) 
    482 # If IMPOSE_VEG 
    483 # The fraction of ice, lakes, etc. is read from the restart file. If 
    484 #  it is not found there we will use the values provided here. 
    485 #  For the moment, there is only ice. 
    486 SECHIBA_FRAC_NOBIO = 0.0 
    487 # default = 0.0 
    488  
    489 # Fraction of the clay fraction (0-dim mode) 
    490 # If IMPOSE_VEG 
    491 # Determines the fraction of clay in the grid box. 
    492 CLAY_FRACTION = 0.2 
    493 # default = 0.2 
    494  
    495 # Should the surface parameters be prescribed 
    496 # This flag allows the user to impose the surface parameters 
    497 #  (Albedo Roughness and Emissivity). It is espacially interesting for 0D 
    498 #  simulations. On the globe it does not make too much sense as 
    499 #  it imposes the same vegetation everywhere 
    500 IMPOSE_AZE = n 
    501 # default = n 
    502  
    503 # Emissivity of the surface for LW radiation 
    504 # If IMPOSE_AZE 
    505 # The surface emissivity used for compution the LE emission 
    506 #  of the surface in a 0-dim version. Values range between  
    507 #  0.97 and 1.. The GCM uses 0.98. 
    508 CONDVEG_EMIS = 1.0 
    509 # default = 1.0 
    510  
    511 # SW visible albedo for the surface 
    512 # If IMPOSE_AZE 
    513 # Surface albedo in visible wavelengths to be used  
    514 #  on the point if a 0-dim version of SECHIBA is used.  
    515 #  Look at the description of the forcing data for  
    516 #  the correct value. 
    517 CONDVEG_ALBVIS = 0.25 
    518 # default = 0.25 
    519  
    520 # SW near infrared albedo for the surface 
    521 # If IMPOSE_AZE 
    522 # Surface albedo in near infrared wavelengths to be used  
    523 #  on the point if a 0-dim version of SECHIBA is used.  
    524 #  Look at the description of the forcing data for  
    525 #  the correct value. 
    526 CONDVEG_ALBNIR = 0.25 
    527 # default = 0.25 
    528  
    529 # Surface roughness (m) 
    530 # If IMPOSE_AZE 
    531 # Surface rougness to be used on the point if a 0-dim version 
    532 #  of SECHIBA is used. Look at the description of the forcing   
    533 #  data for the correct value. 
    534 CONDVEG_Z0 = 0.15 
    535 # default = 0.15_stnd 
    536  
    537 # Height to be added to the height of the first level (m) 
    538 # If IMPOSE_AZE 
    539 # ORCHIDEE assumes that the atmospheric level height is counted 
    540 #  from the zero wind level. Thus to take into account the roughness 
    541 #  of tall vegetation we need to correct this by a certain fraction 
    542 #  of the vegetation height. This is called the roughness height in 
    543 #  ORCHIDEE talk. 
    544 ROUGHHEIGHT = 0.0 
    545 # default = 0.0 
    546  
    547 # The snow albedo used by SECHIBA 
    548 # This option allows the user to impose a snow albedo. 
    549 #  Default behaviour is to use the model of snow albedo 
    550 #  developed by Chalita (1993). 
    551 CONDVEG_SNOWA = default 
    552 # default = use the model of snow albedo developed by Chalita 
    553  
    554 # Switch bare soil albedo dependent (if TRUE) on soil wetness 
    555 # If TRUE, the model for bare soil albedo is the old formulation. 
    556 #  Then it depend on the soil dry or wetness. If FALSE, it is the  
    557 #  new computation that is taken, it is only function of soil color. 
    558 ALB_BARE_MODEL = FALSE 
    559 # default = FALSE 
    560  
    561 # Initial snow mass if not found in restart 
    562 # The initial value of snow mass if its value is not found 
    563 #   in the restart file. This should only be used if the model is  
    564 #   started without a restart file. 
    565 HYDROL_SNOW = 0.0 
    566 # default = 0.0 
    567  
    568  
    569 # Initial snow age if not found in restart 
    570 # The initial value of snow age if its value is not found 
    571 #  in the restart file. This should only be used if the model is  
    572 #  started without a restart file. 
    573 HYDROL_SNOWAGE = 0.0 
    574 # default = 0.0 
    575  
    576 # Initial snow amount on ice, lakes, etc. if not found in restart 
    577 # The initial value of snow if its value is not found 
    578 #  in the restart file. This should only be used if the model is  
    579 #  started without a restart file. 
    580 HYDROL_SNOW_NOBIO = 0.0 
    581 # default = 0.0 
    582  
    583 # Initial snow age on ice, lakes, etc. if not found in restart 
    584 # The initial value of snow age if its value is not found 
    585 #  in the restart file. This should only be used if the model is  
    586 #  started without a restart file. 
    587 HYDROL_SNOW_NOBIO_AGE = 0.0 
    588 # default = 0.0 
    589  
    590 # Initial soil moisture stress if not found in restart 
    591 # The initial value of soil moisture stress if its value is not found 
    592 #  in the restart file. This should only be used if the model is  
    593 #  started without a restart file. 
    594 HYDROL_HUMR = 1.0 
    595 # default = 1.0 
    596  
    597 # Total depth of soil reservoir 
    598 HYDROL_SOIL_DEPTH = 4. 
    599 # default = 2. 
    600  
    601 # Root profile 
    602 # Default values were defined for 2 meters soil depth. 
    603 # For 4 meters soil depth, you may use those ones : 
    604 # 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
    605 HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
    606 # default =  5., .8, .8, 1., .8, .8, 1., 1., .8, 4., 4., 4., 4. 
    607  
    608 # Initial restart deep soil moisture if not found in restart 
    609 # The initial value of deep soil moisture if its value is not found 
    610 #  in the restart file. This should only be used if the model is  
    611 #  started without a restart file. Default behaviour is a saturated soil. 
    612 HYDROL_BQSB = default 
    613 # default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2 
    614  
    615 # Initial upper soil moisture if not found in restart 
    616 # The initial value of upper soil moisture if its value is not found 
    617 #  in the restart file. This should only be used if the model is  
    618 #  started without a restart file. 
    619 HYDROL_GQSB = 0.0 
    620 # default = 0.0 
    621  
    622 # Initial upper reservoir depth if not found in restart 
    623 # The initial value of upper reservoir depth if its value is not found 
    624 #  in the restart file. This should only be used if the model is  
    625 #  started without a restart file. 
    626 HYDROL_DSG = 0.0 
    627 # default = 0.0 
    628  
    629 # Initial dry soil above upper reservoir if not found in restart 
    630 # The initial value of dry soil above upper reservoir if its value  
    631 #  in the restart file. This should only be used if the model is  
    632 #  started without a restart file. The default behaviour 
    633 #  is to compute it from the variables above. Should be OK most of  
    634 #  the time. 
    635 HYDROL_DSP = default 
    636 # default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0 
    637  
    638 # Initial water on canopy if not found in restart 
    639 # The initial value of moisture on canopy if its value  
    640 #  in the restart file. This should only be used if the model is  
    641 #  started without a restart file. 
    642 HYDROL_QSV = 0.0 
    643 # default = 0.0 
    644  
    645 # Soil moisture on each soil tile and levels 
    646 # The initial value of mc if its value is not found 
    647 #  in the restart file. This should only be used if the model is  
    648 #  started without a restart file. 
    649 HYDROL_MOISTURE_CONTENT = 0.3 
    650 # default = 0.3 
    651  
    652 # US_NVM_NSTM_NSLM 
    653 # The initial value of us (relative moisture) if its value is not found 
    654 #  in the restart file. This should only be used if the model is  
    655 #  started without a restart file. 
    656 US_INIT = 0.0 
    657 # default = 0.0 
    658  
    659 # Coefficient for free drainage at bottom 
    660 # The initial value of free drainage if its value is not found 
    661 #  in the restart file. This should only be used if the model is  
    662 #  started without a restart file. 
    663 FREE_DRAIN_COEF = 1.0, 1.0, 1.0 
    664 # default = 1.0, 1.0, 1.0 
    665  
    666 # Bare soil evap on each soil if not found in restart 
    667 # The initial value of bare soils evap if its value is not found 
    668 #  in the restart file. This should only be used if the model is  
    669 #  started without a restart file. 
    670 EVAPNU_SOIL = 0.0 
    671 # default = 0.0 
    672  
    673 # Initial temperature if not found in restart 
    674 # The initial value of surface temperature if its value is not found 
    675 #  in the restart file. This should only be used if the model is  
    676 #  started without a restart file. 
    677 ENERBIL_TSURF = 280. 
    678 # default = 280. 
    679  
    680 # Initial Soil Potential Evaporation 
    681 # The initial value of soil potential evaporation if its value  
    682 #  is not found in the restart file. This should only be used if 
    683 #  the model is started without a restart file.  
    684 ENERBIL_EVAPOT = 0.0 
    685 # default = 0.0 
    686  
    687 # Initial soil temperature profile if not found in restart 
    688 # The initial value of the temperature profile in the soil if  
    689 #   its value is not found in the restart file. This should only  
    690 #   be used if the model is started without a restart file. Here 
    691 #   we only require one value as we will assume a constant  
    692 #   throughout the column. 
    693 THERMOSOIL_TPRO = 280. 
    694 # default = 280. 
    695  
    696 # Initial leaf CO2 level if not found in restart 
    697 # The initial value of leaf_ci if its value is not found 
    698 #  in the restart file. This should only be used if the model is 
    699 #  started without a restart file. 
    700 DIFFUCO_LEAFCI = 233. 
    701 # default = 233. 
    702  
    703  
    704 # Keep cdrag coefficient from gcm. 
    705 # Set to .TRUE. if you want q_cdrag coming from GCM. 
    706 #  Keep cdrag coefficient from gcm for latent and sensible heat fluxes. 
    707 #  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs). 
     101# Use cdrag coefficient from gcm 
    708102CDRAG_FROM_GCM = y 
    709 # default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE. 
    710  
    711  
    712 # Artificial parameter to increase or decrease canopy resistance 
    713 # Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin 
    714 # By PFT. 
    715 RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 
    716 # default = 1. 
    717  
    718103 
    719104# Interception reservoir coefficient. 
    720 # Transforms leaf area index into size of interception reservoir 
    721 #  for slowproc_derivvar or stomate. 
     105# default = 0.1 
    722106SECHIBA_QSINT = 0.02 
    723 # default = 0.1 
    724107 
     108# Parmeters related to vegetation map 
    725109#************************************************************************** 
    726 # LAND_USE 
    727 #************************************************************************** 
    728  
    729110# Read a land_use vegetation map 
    730 # pft values are needed, max time axis is 293 
     111# default = n 
    731112LAND_USE = y 
    732 # default = n 
    733113 
    734114# Year of the land_use vegetation map readed 
    735115# year off the pft map 
    736 # If LAND_USE (11 = 1860 - 1850 +1 for PFTmap.20C3M.nc, 1 for PFTmap_IPCC_2000.nc)  
     116# default = 282 
    737117VEGET_YEAR = 1 
    738 # default = 282 
    739118 
    740 # booleen to indicate that a new LAND USE file will be used (since 1.9.5 version). 
    741119# The parameter is used to bypass veget_year count  
    742120# and reinitialize it with VEGET_YEAR parameter. 
    743121# Then it is possible to change LAND USE file. 
    744122# If LAND_USE 
     123# default = y 
    745124VEGET_REINIT = n 
    746 # default = n 
    747125 
    748126# Update vegetation frequency (since 2.0 version) 
    749 # The veget datas will be update each this time step. 
    750 # If LAND_USE 
     127# The veget datas will be update at this period if LAND_USE 
     128# default = 1Y 
    751129VEGET_UPDATE = _AUTO_ 
    752 # default = 1Y 
    753130 
    754131# treat land use modifications 
     
    757134# deforestation.                                 
    758135# If LAND_USE 
     136# default = y 
    759137LAND_COVER_CHANGE = _AUTO_ 
    760 # default = y 
    761138 
    762 #************************************************************************** 
     139# Read reftemp file. Note behaviour and default value in the code has change in rev 2441 trunk ORCHIDEE 
     140# default=NONE 
     141REFTEMP_FILE=reftemp.nc 
    763142 
    764 # agriculture allowed? 
    765 # With this variable, you can determine 
    766 #  whether agriculture is allowed 
    767 AGRICULTURE = y 
    768 # default = y 
    769  
    770 # Harvert model for agricol PFTs. 
    771 # Compute harvest above ground biomass for agriculture. 
    772 # Change daily turnover. 
    773 HARVEST_AGRI = y 
    774 # default = y 
    775  
    776 # herbivores allowed? 
    777 # With this variable, you can activate herbivores  
    778 HERBIVORES = n 
    779 # default = n 
    780  
    781 # treat expansion of PFTs across a grid cell? 
    782 # With this variable, you can determine 
    783 #  whether we treat expansion of PFTs across a 
    784 #  grid cell. 
    785 TREAT_EXPANSION = n 
    786 # default = n 
    787  
    788 #************************************************************************** 
    789  
    790 # Time within the day simulated 
    791 # This is the time spent simulating the current day. This variable is 
    792 #  prognostic as it will trigger all the computations which are 
    793 #  only done once a day. 
    794 SECHIBA_DAY = 0.0 
    795 # default = 0.0 
    796  
    797 # Time step of STOMATE and other slow processes 
    798 # Time step (s) of regular update of vegetation 
    799 #  cover, LAI etc. This is also the time step 
    800 #  of STOMATE. 
    801 DT_SLOW = 86400. 
    802 # default = un_jour = 86400. 
    803  
    804 #************************************************************************** 
    805  
    806 # Allows to switch on the multilayer hydrology of CWRR 
    807 # This flag allows the user to decide if the vertical 
    808 #  hydrology should be treated using the multi-layer  
    809 #  diffusion scheme adapted from CWRR by Patricia de Rosnay. 
    810 #  by default the Choisnel hydrology is used. 
    811 HYDROL_CWRR = n  
    812 # default = n 
    813  
    814 # do horizontal diffusion? 
    815 # If TRUE, then water can diffuse horizontally between 
    816 #  the PFTs' water reservoirs. 
    817 HYDROL_OK_HDIFF = n 
    818 # default = n 
    819   
    820  
    821 # time scale (s) for horizontal diffusion of water 
    822 # If HYDROL_OK_HDIFF 
    823 # Defines how fast diffusion occurs horizontally between 
    824 #  the individual PFTs' water reservoirs. If infinite, no 
    825 #  diffusion. 
    826 HYDROL_TAU_HDIFF = 1800. 
    827 # default = 86400. 
    828  
    829 # Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8). 
    830 # During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall 
    831 #  will get directly to the ground without being intercepted, for each PFT.. 
    832 PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    833 # default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    834  
    835 # Decides if we route the water or not 
    836 # This flag allows the user to decide if the runoff 
    837 #  and drainage should be routed to the ocean 
    838 #  and to downstream grid boxes. 
    839 RIVER_ROUTING = y 
    840 # default = n 
    841  
    842 # Name of file which contains the routing information 
    843 # The file provided here should allow the routing module to 
    844 #  read the high resolution grid of basins and the flow direction  
    845 #  from one mesh to the other. 
    846 ROUTING_FILE = routing.nc 
    847 # default = routing.nc 
    848  
    849 # Time step of the routing scheme 
    850 # If RIVER_ROUTING 
    851 # This values gives the time step in seconds of the routing scheme.  
    852 #   It should be multiple of the main time step of ORCHIDEE. One day 
    853 #   is a good value. 
    854 ROUTING_TIMESTEP = 86400 
    855 # default = 86400 
    856  
    857 # Number of rivers  
    858 # If RIVER_ROUTING 
    859 # This parameter chooses the number of largest river basins 
    860 #  which should be treated as independently as rivers and not 
    861 #  flow into the oceans as diffusion coastal flow. 
    862 ROUTING_RIVERS = 50 
    863 # default = 50 
    864  
    865 # Should we compute an irrigation flux  
    866 # This parameters allows the user to ask the model 
    867 #  to compute an irigation flux. This performed for the 
    868 #  on very simple hypothesis. The idea is to have a good 
    869 #  map of irrigated areas and a simple function which estimates 
    870 #  the need to irrigate. 
    871 DO_IRRIGATION = n 
    872 # default = n 
    873  
    874 # Name of file which contains the map of irrigated areas 
    875 # If IRRIGATE 
    876 # The name of the file to be opened to read the field 
    877 #  with the area in m^2 of the area irrigated within each 
    878 #  0.5 0.5 deg grid box. The map currently used is the one 
    879 #  developed by the Center for Environmental Systems Research  
    880 #  in Kassel (1995). 
    881 IRRIGATION_FILE = irrigated.nc 
    882 # default = irrigated.nc 
    883  
    884 # Should we include floodplains  
    885 # This parameters allows the user to ask the model 
    886 #  to take into account the flood plains and return  
    887 #  the water into the soil moisture. It then can go  
    888 #  back to the atmopshere. This tried to simulate  
    889 #  internal deltas of rivers. 
    890 DO_FLOODPLAINS = n 
    891 # default = n 
    892  
    893 # Use XIOS for writing diagnostics file 
    894 # defulat = n 
    895 XIOS_ORCHIDEE_OK = _AUTO_ 
    896 #************************************************************************** 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/run.def

    r2382 r2410  
    1111## Type de calendrier utilise 
    1212## valeur possible: earth_360d (defaut), earth_365d, earth_366d 
    13 calend= _AUTO_ 
     13calend= _AUTOBLOCKER_ 
    1414## Jour de l etat initial ( = 350  si 20 Decembre ,par expl. ,comme ici ) 
    15 dayref= _AUTO_ 
     15dayref= _AUTOBLOCKER_ 
    1616##  Annee de l etat  initial (   avec  4  chiffres   ) 
    17 anneeref= _AUTO_ 
     17anneeref= _AUTOBLOCKER_ 
    1818## Nombre de jours d integration 
    19 nday= _AUTO_ 
     19nday= _AUTOBLOCKER_ 
    2020## Remise a zero de la date initiale 
    21 raz_date= _AUTO_ 
     21raz_date= _AUTOBLOCKER_ 
    2222## periode de sortie des variables de controle (en pas) 
    2323iconser=240 
     
    2727ok_dynzon=n 
    2828## periode de stockage fichier dynzon (en jour) 
    29 periodav= _AUTO_ 
     29periodav= _AUTOBLOCKER_ 
    3030## activation du calcul d equilibrage de charge 
    3131adjust= _AUTO_ 
     
    3939### type_ocean = force / slab  /couple 
    4040### type_ocean is modified automatically by the lmdz.driver  
    41 type_ocean=_AUTO_ 
     41type_ocean=_AUTOBLOCKER_ 
    4242### version_ocean = nemo / opa8 
    4343version_ocean=nemo 
     
    4646### VEGET= y si ORCHIDEE, =n si bucket 
    4747### VEGET is modified automatically by the lmdz.driver  
    48 VEGET=_AUTO_ 
     48VEGET=_AUTOBLOCKER_ 
    4949### Choice of tracers type_trac=lmdz/inca/repr 
    5050### type_trac is set automatically by the lmdz.driver 
    51 type_trac=_AUTO_ 
     51type_trac=_AUTOBLOCKER_ 
    5252### config_inca=aero/chem needed only if type_trac=inca 
    53 config_inca=_AUTO_  
     53config_inca=_AUTOBLOCKER_  
    5454### Only concerning the program ce0l : for creating file grilles_gcm.nc 
    5555grilles_gcm_netcdf=_AUTO_ 
  • CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/DRIVER/orchidee.driver

    r2382 r2410  
    163163# Modify in orchidee.def VEGET_UPDATE and LAND_COVER_CHANGE if they are set in orchidee.card section UserChoices 
    164164    if [ ! X${orchidee_UserChoices_VEGET_UPDATE} = X ] ; then 
    165         IGCM_comp_modifyDefFile blocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE} 
    166     else 
    167         IGCM_comp_modifyDefFile blocker orchidee.def VEGET_UPDATE 0Y 
     165        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE} 
     166    else 
     167        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y 
    168168    fi 
    169169    if [ ! X${orchidee_UserChoices_LAND_COVER_CHANGE} = X ] ; then 
    170         IGCM_comp_modifyDefFile blocker orchidee.def LAND_COVER_CHANGE ${orchidee_UserChoices_LAND_COVER_CHANGE} 
    171     else 
    172         IGCM_comp_modifyDefFile blocker orchidee.def LAND_COVER_CHANGE n 
     170        IGCM_comp_modifyDefFile nonblocker orchidee.def LAND_COVER_CHANGE ${orchidee_UserChoices_LAND_COVER_CHANGE} 
     171    else 
     172        IGCM_comp_modifyDefFile nonblocker orchidee.def LAND_COVER_CHANGE n 
    173173    fi 
    174174 
  • CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/orchidee.def_CWRR

    r2338 r2410  
    11# 
    22#************************************************************************** 
    3 #                    Namelist for ORCHIDEE 
    4 #************************************************************************** 
    5 # 
    6 # 
    7 #************************************************************************** 
    8 #          OPTIONS NOT SET 
    9 #************************************************************************** 
    10 # 
    11 # 
    12 #************************************************************************** 
    13 #          Management of display in the run of ORCHIDEE 
     3#                    Parameter file list for ORCHIDEE 
    144#************************************************************************** 
    155 
    16 # Model chatting level 
    17 # level of online diagnostics in STOMATE (0-4) 
    18 # With this variable, you can determine how much online information STOMATE 
    19 #  gives during the run. 0 means virtually no info. 
    20 BAVARD = 1 
     6# Input and output 
     7#************************************************************************** 
     8# Restart the time from the GCM.  
     9# default = n 
     10SECHIBA_reset_time = y 
     11 
     12# Name of restart to read for initial conditions 
     13# default = NONE 
     14SECHIBA_restart_in = _AUTOBLOCKER_ 
     15 
     16# Name of restart to read for initial conditions of STOMATE 
     17# default = NONE 
     18STOMATE_RESTART_FILEIN = _AUTOBLOCKER_ 
     19 
     20# Use XIOS for writing diagnostics file 
     21# defulat = n 
     22XIOS_ORCHIDEE_OK = _AUTO_ 
     23 
     24# Flag to activate sechiba_out_2.nc history file for SECHIBA 
     25# default  = FALSE 
     26SECHIBA_HISTFILE2 = _AUTO_ 
     27 
     28# SECHIBA history output level (0..10) 
     29# default = 5 
     30SECHIBA_HISTLEVEL = _AUTO_ 
     31 
     32# SECHIBA history 2 output level (0..10) 
    2133# default = 1 
     34SECHIBA_HISTLEVEL2 = _AUTO_ 
    2235 
    23 # Flag for debug information 
    24 # This option allows to switch on the output of debug 
    25 #         information without recompiling the code. 
    26 DEBUG_INFO = n 
    27 #default = n 
     36# STOMATE history output level (0..10) 
     37# default = 10 
     38STOMATE_HISTLEVEL = _AUTO_ 
    2839 
    29 # ORCHIDEE will print more messages 
    30 # This flag permits to print more debug messages in the run. 
    31 LONGPRINT = n 
    32 #default = n 
     40# Writefrequency in seconds in sechiba_history.nc 
     41# default = 86400.0 
     42WRITE_STEP = _AUTO_ 
    3343 
    34 #--------------------------------------------------------------------- 
     44# Writefrequency in seconds sechiba_out_2.nc  
     45# default = 1800.0 
     46WRITE_STEP2 = _AUTO_ 
    3547 
    36 # To reset the time coming from SECHIBA restart file 
    37 # This option allows the model to override the time 
    38 #  found in the restart file of SECHIBA with the time 
    39 #  of the first call. That is the restart time of the GCM. 
    40 SECHIBA_reset_time = y 
     48# Writefrequency in days in stomate_history.nc 
     49# default = 10. 
     50STOMATE_HIST_DT = _AUTO_ 
     51 
     52# Writefrequency in days or -1 for monthly output in stomate_ipcc_history.nc 
     53# default = 0. 
     54STOMATE_IPCC_HIST_DT = -1 
     55 
     56 
     57# Hydrology parameters 
     58#************************************************************************** 
     59# Activate the multi-layer diffusion scheme adapted from CWRR 
     60# by default the Choisnel hydrology is used. 
    4161# default = n 
     62HYDROL_CWRR = y 
     63 
     64# Total depth of soil reservoir 
     65# default = 2./4. depending on HYDROL_CWRR 
     66HYDROL_SOIL_DEPTH = 2. 
     67 
     68# Root profile 
     69HYDROL_HUMCSTE = 5.0, 0.8, 0.8, 1.0, 0.8, 0.8, 1.0, 1.0, 0.8, 4.0, 4.0, 4.0, 4.0  
     70 
     71# Activate river routing 
     72# default = n 
     73RIVER_ROUTING = y 
     74 
    4275 
    4376#************************************************************************** 
    44 #          Files : incoming / forcing / restart /output 
    45 #************************************************************************** 
    46 # Ancillary files : 
    47 #--------------------------------------------------------------------- 
     77# Activate Stomate component 
     78# default = n 
     79STOMATE_OK_STOMATE = _AUTOBLOCKER_  
    4880 
    49 # Name of file from which the vegetation map is to be read 
    50 # If !IMPOSE_VEG 
    51 # If LAND_USE  
    52 #   default = pft_new.nc 
    53 #   The name of the file to be opened to read a vegetation 
    54 #   map (in pft) is to be given here.  
    55 # If !LAND_USE 
    56 #   default = ../surfmap/carteveg5km.nc 
    57 #   The name of the file to be opened to read the vegetation 
    58 #   map is to be given here. Usualy SECHIBA runs with a 5kmx5km 
    59 #   map which is derived from the IGBP one. We assume that we have 
    60 #   a classification in 87 types. This is Olson modified by Viovy. 
    61 VEGETATION_FILE = PFTmap.nc 
     81# Activate calculations of CO2 according to Farqhuar and Ball 
     82# default = n 
     83STOMATE_OK_CO2 = y 
    6284 
    63  
    64 # Name of file from which the bare soil albedo 
    65 # If !IMPOSE_AZE 
    66 # The name of the file to be opened to read the soil types from  
    67 #  which we derive then the bare soil albedos. This file is 1x1  
    68 #  deg and based on the soil colors defined by Wilson and Henderson-Seller. 
    69 SOILALB_FILE = soils_param.nc 
    70 # default = ../surfmap/soils_param.nc 
    71  
    72 # Name of file from which soil types are read 
    73 # If !IMPOSE_VEG 
    74 # The name of the file to be opened to read the soil types.  
    75 #  The data from this file is then interpolated to the grid of 
    76 #  of the model. The aim is to get fractions for sand loam and 
    77 #  clay in each grid box. This information is used for soil hydrology 
    78 #  and respiration. 
    79 #  This parameter change name in newer ORCHIDEE versions; SOILTYPE_FILE=>SOILCLASS_FILE 
    80 SOILTYPE_FILE = soils_param.nc 
    81 SOILCLASS_FILE= soils_param.nc 
    82 # default = ../surfmap/soils_param.nc 
    83  
    84 # Name of file from which the reference 
    85 # The name of the file to be opened to read 
    86 #  temperature is read 
    87 #  the reference surface temperature. 
    88 #  The data from this file is then interpolated 
    89 #  to the grid of the model. 
    90 #  The aim is to get a reference temperature either 
    91 #  to initialize the corresponding prognostic model 
    92 #  variable correctly (ok_dgvm = TRUE) or to impose it 
    93 #  as boundary condition (ok_dgvm = FALSE) 
    94 REFTEMP_FILE = reftemp.nc 
    95 # default = reftemp.nc 
    96  
    97 # Name of file containg information about topography. 
    98 TOPOGRAPHY_FILE =cartepente2d_15min.nc 
    99  
    100 # Input and output restart file for SECHIBA : 
    101 #--------------------------------------------------------------------- 
    102  
    103 # Name of restart to READ for initial conditions 
    104 # This is the name of the file which will be opened 
    105 #  to extract the initial values of all prognostic 
    106 #  values of the model. This has to be a netCDF file. 
    107 #  Not truly COADS compliant. NONE will mean that 
    108 #  no restart file is to be expected. 
    109 SECHIBA_restart_in = _AUTO_ 
    110 # default = NONE 
    111  
    112 # Name of restart files to be created by SECHIBA 
    113 # This variable give the name for the restart files.  
    114 #  The restart software within IOIPSL will add .nc if needed. 
    115 SECHIBA_rest_out = sechiba_rest_out.nc 
    116 # default = sechiba_rest_out.nc 
    117  
    118 # Input and output restart file for STOMATE : 
    119 #--------------------------------------------------------------------- 
    120  
    121 # Name of restart to READ for initial conditions of STOMATE 
    122 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    123 # This is the name of the file which will be opened of STOMATE 
    124 #   to extract the initial values of all prognostic values of STOMATE. 
    125 STOMATE_RESTART_FILEIN = _AUTO_ 
    126 # default = NONE 
    127  
    128 # Name of restart files to be created by STOMATE 
    129 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    130 # This is the name of the file which will be opened 
    131 #        to write the final values of all prognostic values 
    132 #        of STOMATE. 
    133 STOMATE_RESTART_FILEOUT = stomate_rest_out.nc 
    134 # default = stomate_restart.nc 
    135  
    136 # Forcing files for TESTSTOMATE and FORCESOIL 
    137 #--------------------------------------------------------------------- 
    138  
    139 # Name of STOMATE's forcing file 
    140 # Name that will be given to STOMATE's offline forcing file 
    141 #STOMATE_FORCING_NAME = stomate_forcing.nc 
    142 #default = NONE 
    143  
    144 # Size of STOMATE forcing data in memory (MB) 
    145 # This variable determines how many 
    146 #  forcing states will be kept in memory. 
    147 #  Must be a compromise between memory 
    148 #  use and frequeny of disk access. 
    149 STOMATE_FORCING_MEMSIZE = 50 
    150 # default = 50 
    151  
    152 # Name of STOMATE's carbon forcing file 
    153 # Name that will be given to STOMATE's carbon offline forcing file 
    154 #STOMATE_CFORCING_NAME = stomate_Cforcing.nc 
    155 # default = NONE 
    156  
    157  
    158 # Produced forcing file name (SECHIBA puis STOMATE) : 
    159 #--------------------------------------------------------------------- 
    160  
    161 # ORCHIDEE will write out its forcing to a file 
    162 # This flag allows to write to a file all the variables 
    163 #  which are used to force the land-surface. The file  
    164 #  has exactly the same format than a normal off-line forcing 
    165 #  and thus this forcing can be used for forcing ORCHIDEE. 
    166 #ORCHIDEE_WATCHOUT = y 
    167 # default = n 
    168  
    169 # Filenane for the ORCHIDEE forcing file 
    170 # If ORCHIDEE_WATCHOUT 
    171 # This is the name of the file in which the 
    172 #  forcing used here will be written for later use.  
    173 WATCHOUT_FILE = orchidee_watchout.nc 
    174 # default = orchidee_watchout.nc 
    175  
    176 # ORCHIDEE will write out with this frequency 
    177 # If ORCHIDEE_WATCHOUT 
    178 # This flag indicates the frequency of the write of the variables.  
    179 DT_WATCHOUT = 1800 
    180 # default = dt 
    181  
    182 # STOMATE does minimum service 
    183 # set to TRUE if you want STOMATE to read 
    184 #  and write its start files and keep track 
    185 #  of longer-term biometeorological variables. 
    186 #  This is useful if OK_STOMATE is not set, 
    187 #  but if you intend to activate STOMATE later. 
    188 #  In that case, this run can serve as a  
    189 #  spinup for longer-term biometeorological 
    190 #  variables. 
    191 #STOMATE_WATCHOUT = y 
    192 # default = n 
    193  
    194 # Output file name (SECHIBA and STOMATE) : 
    195 #--------------------------------------------------------------------- 
    196 # Name of file in which the output is going 
    197 # This file is going to be created by the model 
    198 #  to be written 
    199 #  and will contain the output from the model. 
    200 #  This file is a truly COADS compliant netCDF file. 
    201 #  It will be generated by the hist software from 
    202 #  the IOIPSL package. 
    203 OUTPUT_FILE = sechiba_history.nc 
    204 # default = cabauw_out.nc 
    205  
    206 # Flag to switch on histfile 2 for SECHIBA (hi-frequency ?) 
    207 # This Flag switch on the second SECHIBA writing for hi (or low)  
    208 #  frequency writing. This second output is optional and not written 
    209 #  by default. 
    210 SECHIBA_HISTFILE2 = _AUTO_ 
    211 # default  = FALSE 
    212  
    213 # Name of file in which the output number 2 is going 
    214 #   to be written 
    215 # If SECHIBA_HISTFILE2 
    216 # This file is going to be created by the model 
    217 #   and will contain the output 2 from the model. 
    218 SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc 
    219 # default  = sechiba_out_2.nc 
    220  
    221 # Name of file in which STOMATE's output is going to be written 
    222 # This file is going to be created by the model 
    223 #  and will contain the output from the model. 
    224 #  This file is a truly COADS compliant netCDF file. 
    225 #  It will be generated by the hist software from 
    226 #  the IOIPSL package. 
    227 STOMATE_OUTPUT_FILE = stomate_history.nc 
    228 # default = stomate_history.nc 
    229  
    230 # Write levels for outputs files (number of variables) : 
    231 #--------------------------------------------------------------------- 
    232  
    233 # SECHIBA history output level (0..10) 
    234 # Chooses the list of variables in the history file.  
    235 #  Values between 0: nothing is written; 10: everything is  
    236 #  written are available More details can be found on the web under documentation. 
    237 #  web under documentation. 
    238 SECHIBA_HISTLEVEL = _AUTO_ 
    239 # default = 5 
    240  
    241 # SECHIBA history 2 output level (0..10) 
    242 # If SECHIBA_HISTFILE2 
    243 # Chooses the list of variables in the history file.  
    244 #   Values between 0: nothing is written; 10: everything is  
    245 #   written are available More details can be found on the web under documentation. 
    246 #   web under documentation. 
    247 # First level contains all ORCHIDEE outputs. 
    248 SECHIBA_HISTLEVEL2 = _AUTO_ 
    249 # default = 1 
    250  
    251 # STOMATE history output level (0..10) 
    252 #  0: nothing is written; 10: everything is written 
    253 STOMATE_HISTLEVEL = _AUTO_ 
    254 # default = 10 
    255  
    256 #-------------------------------------------------------------------- 
    257 # STOMATE_IPCC_OUTPUT_FILE 
    258 # This file is going to be created by the model 
    259 #    and will contain the output from the model. 
    260 #    This file is a truly COADS compliant netCDF file. 
    261 #    It will be generated by the hist software from 
    262 #    the IOIPSL package. 
    263 # Name of file in which STOMATE's output is going 
    264 # to be written 
    265 STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc 
    266 # default = stomate_ipcc_history.nc 
    267  
    268 # STOMATE_IPCC_HIST_DT 
    269 # Time step of the STOMATE IPCC history file 
    270 # STOMATE IPCC history time step (d) 
    271 STOMATE_IPCC_HIST_DT = -1 
    272 # default = 0. 
    273  
    274 # Write frequency for output files (SECHIBA in seconds et 
    275 # STOMATE in days) : 
    276 #--------------------------------------------------------------------- 
    277 # Frequency in seconds at which to WRITE output 
    278 # This variables gives the frequency the output of 
    279 #  the model should be written into the netCDF file. 
    280 #  It does not affect the frequency at which the 
    281 #  operations such as averaging are done. 
    282 WRITE_STEP = _AUTO_ 
    283 # default = 86400.0 
    284  
    285 # Frequency in seconds at which to WRITE output 
    286 # If SECHIBA_HISTFILE2 
    287 # This variables gives the frequency the output 2 of 
    288 #   the model should be written into the netCDF file. 
    289 #   It does not affect the frequency at which the 
    290 #   operations such as averaging are done. 
    291 #   That is IF the coding of the calls to histdef 
    292 #   are correct ! 
    293 WRITE_STEP2 = _AUTO_ 
    294 # default = 1800.0 
    295  
    296 # STOMATE history time step (d) 
    297 # Time step of the STOMATE history file 
    298 # Care : this variable must be higher than DT_SLOW 
    299 STOMATE_HIST_DT = _AUTO_ 
    300 # default = 10. 
    301  
    302 #--------------------------------------------------------------------- 
    303 # FORCESOIL CARBON spin up parametrization 
    304 #--------------------------------------------------------------------- 
    305  
    306 # Number of time steps per year for carbon spinup. 
    307 FORCESOIL_STEP_PER_YEAR = 12 
    308 # default = 12 
    309  
    310 # Number of years saved for carbon spinup. 
    311 FORCESOIL_NB_YEAR = 1 
    312 # default = 1 
    313  
    314 #--------------------------------------------------------------------- 
    315 # Parametrization : 
    316 #--------------------------------------------------------------------- 
    317  
    318 # Activate STOMATE? 
    319 # set to TRUE if STOMATE is to be activated 
    320 # STOMATE_OK_STOMATE will be set to y or n by orchidee.driver depending on activation of stomate component SBG in config.card 
    321 STOMATE_OK_STOMATE = _AUTO_  
    322 # default = n 
    323  
    324 # Activate DGVM? 
    325 # set to TRUE if Dynamic Vegetation DGVM is to be activated 
    326 STOMATE_OK_DGVM = n 
    327 # default = n 
    328  
    329 # Activate CO2? 
    330 # set to TRUE if photosynthesis is to be activated 
    331 STOMATE_OK_CO2 = y 
    332 # default = n 
    333  
    334 # Flag to force the value of atmospheric CO2 for vegetation. 
    335 # If this flag is set to true, the ATM_CO2 parameter is used 
    336 #  to prescribe the atmospheric CO2. 
    337 # This Flag is only use in couple mode. 
    338 FORCE_CO2_VEG = FALSE 
    339 # default = FALSE 
    340  
    341 # Value for atm CO2. 
    342 # If FORCE_CO2_VEG (in not forced mode) 
    343 # Value to prescribe the atm CO2. 
    344 #  For pre-industrial simulations, the value is 286.2 . 
    345 #  348. for 1990 year. 
    346 ATM_CO2 = 350. 
    347 # default = 350. 
    348  
    349 # constant tree mortality 
    350 # If yes, then a constant mortality is applied to trees.  
    351 #  Otherwise, mortality is a function of the trees'  
    352 #  vigour (as in LPJ). 
    353 LPJ_GAP_CONST_MORT = y 
    354 # default = y 
    355  
    356 # no fire allowed 
    357 # With this variable, you can allow or not 
    358 #  the estimation of CO2 lost by fire 
    359 FIRE_DISABLE = n 
    360 # default = n 
    361  
    362 # Average method for z0 
    363 # If this flag is set to true (y) then the neutral Cdrag 
    364 #  is averaged instead of the log(z0). This should be 
    365 #  the prefered option. We still wish to keep the other 
    366 #  option so we can come back if needed. If this is 
    367 #  desired then one should set Z0CDRAG_AVE = n 
    368 Z0CDRAG_AVE = y 
    369 # default = y 
    370  
    371 # parameters describing the surface (vegetation + soil) : 
    372 #--------------------------------------------------------------------- 
    373 # 
    374 # Should the vegetation be prescribed 
    375 # This flag allows the user to impose a vegetation distribution 
    376 #  and its characterisitcs. It is espacially interesting for 0D 
    377 #  simulations. On the globe it does not make too much sense as 
    378 #  it imposes the same vegetation everywhere 
    379 IMPOSE_VEG = n 
    380 # default = n 
    381  
    382 # Flag to use old "interpolation" of vegetation map. 
    383 # IF NOT IMPOSE_VEG and NOT LAND_USE 
    384 #  If you want to recover the old (ie orchidee_1_2 branch)  
    385 #   "interpolation" of vegetation map. 
    386 SLOWPROC_VEGET_OLD_INTERPOL = n 
    387 # default = n 
    388  
    389 # Vegetation distribution within the mesh (0-dim mode) 
    390 # If IMPOSE_VEG 
    391 # The fraction of vegetation is read from the restart file. If 
    392 #  it is not found there we will use the values provided here. 
    393 SECHIBA_VEG__01 = 0.2 
    394 SECHIBA_VEG__02 = 0.0 
    395 SECHIBA_VEG__03 = 0.0 
    396 SECHIBA_VEG__04 = 0.0 
    397 SECHIBA_VEG__05 = 0.0 
    398 SECHIBA_VEG__06 = 0.0 
    399 SECHIBA_VEG__07 = 0.0 
    400 SECHIBA_VEG__08 = 0.0 
    401 SECHIBA_VEG__09 = 0.0 
    402 SECHIBA_VEG__10 = 0.8 
    403 SECHIBA_VEG__11 = 0.0 
    404 SECHIBA_VEG__12 = 0.0 
    405 SECHIBA_VEG__13 = 0.0 
    406 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    407  
    408 # Maximum vegetation distribution within the mesh (0-dim mode) 
    409 # If IMPOSE_VEG 
    410 # The fraction of vegetation is read from the restart file. If 
    411 #  it is not found there we will use the values provided here. 
    412 SECHIBA_VEGMAX__01 = 0.2 
    413 SECHIBA_VEGMAX__02 = 0.0 
    414 SECHIBA_VEGMAX__03 = 0.0 
    415 SECHIBA_VEGMAX__04 = 0.0 
    416 SECHIBA_VEGMAX__05 = 0.0 
    417 SECHIBA_VEGMAX__06 = 0.0 
    418 SECHIBA_VEGMAX__07 = 0.0 
    419 SECHIBA_VEGMAX__08 = 0.0 
    420 SECHIBA_VEGMAX__09 = 0.0 
    421 SECHIBA_VEGMAX__10 = 0.8 
    422 SECHIBA_VEGMAX__11 = 0.0 
    423 SECHIBA_VEGMAX__12 = 0.0 
    424 SECHIBA_VEGMAX__13 = 0.0 
    425 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    426  
    427 # LAI for all vegetation types (0-dim mode) 
    428 # If IMPOSE_VEG 
    429 # The maximum LAI used in the 0dim mode. The values should be found 
    430 #  in the restart file. The new values of LAI will be computed anyway 
    431 #  at the end of the current day. The need for this variable is caused 
    432 #  by the fact that the model may stop during a day and thus we have not 
    433 #  yet been through the routines which compute the new surface conditions. 
    434 SECHIBA_LAI__01 = 0. 
    435 SECHIBA_LAI__02 = 8. 
    436 SECHIBA_LAI__03 = 8. 
    437 SECHIBA_LAI__04 = 4. 
    438 SECHIBA_LAI__05 = 4.5 
    439 SECHIBA_LAI__06 = 4.5 
    440 SECHIBA_LAI__07 = 4. 
    441 SECHIBA_LAI__08 = 4.5 
    442 SECHIBA_LAI__09 = 4. 
    443 SECHIBA_LAI__10 = 2. 
    444 SECHIBA_LAI__11 = 2. 
    445 SECHIBA_LAI__12 = 2. 
    446 SECHIBA_LAI__13 = 2. 
    447 # default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2. 
    448  
    449 # Height for all vegetation types (m) 
    450 # If IMPOSE_VEG 
    451 # The height used in the 0dim mode. The values should be found 
    452 #  in the restart file. The new values of height will be computed anyway 
    453 #  at the end of the current day. The need for this variable is caused 
    454 #  by the fact that the model may stop during a day and thus we have not 
    455 #  yet been through the routines which compute the new surface conditions. 
     85# Prescribed height of vegetation 
     86# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    45687SLOWPROC_HEIGHT__01 = 0. 
    45788SLOWPROC_HEIGHT__02 = 50. 
     
    46798SLOWPROC_HEIGHT__12 = .4 
    46899SLOWPROC_HEIGHT__13 = .4 
    469 # default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    470100 
    471  
    472 # Fraction of the 3 soil types (0-dim mode) 
    473 # If IMPOSE_VEG 
    474 # Determines the fraction for the 3 soil types 
    475 #  in the mesh in the following order : sand loam and clay. 
    476 SOIL_FRACTIONS__01 = 0.28 
    477 SOIL_FRACTIONS__02 = 0.52 
    478 SOIL_FRACTIONS__03 = 0.20 
    479 # default = 0.28, 0.52, 0.20 
    480  
    481 # Fraction of other surface types within the mesh (0-dim mode) 
    482 # If IMPOSE_VEG 
    483 # The fraction of ice, lakes, etc. is read from the restart file. If 
    484 #  it is not found there we will use the values provided here. 
    485 #  For the moment, there is only ice. 
    486 SECHIBA_FRAC_NOBIO = 0.0 
    487 # default = 0.0 
    488  
    489 # Fraction of the clay fraction (0-dim mode) 
    490 # If IMPOSE_VEG 
    491 # Determines the fraction of clay in the grid box. 
    492 CLAY_FRACTION = 0.2 
    493 # default = 0.2 
    494  
    495 # Should the surface parameters be prescribed 
    496 # This flag allows the user to impose the surface parameters 
    497 #  (Albedo Roughness and Emissivity). It is espacially interesting for 0D 
    498 #  simulations. On the globe it does not make too much sense as 
    499 #  it imposes the same vegetation everywhere 
    500 IMPOSE_AZE = n 
    501 # default = n 
    502  
    503 # Emissivity of the surface for LW radiation 
    504 # If IMPOSE_AZE 
    505 # The surface emissivity used for compution the LE emission 
    506 #  of the surface in a 0-dim version. Values range between  
    507 #  0.97 and 1.. The GCM uses 0.98. 
    508 CONDVEG_EMIS = 1.0 
    509 # default = 1.0 
    510  
    511 # SW visible albedo for the surface 
    512 # If IMPOSE_AZE 
    513 # Surface albedo in visible wavelengths to be used  
    514 #  on the point if a 0-dim version of SECHIBA is used.  
    515 #  Look at the description of the forcing data for  
    516 #  the correct value. 
    517 CONDVEG_ALBVIS = 0.25 
    518 # default = 0.25 
    519  
    520 # SW near infrared albedo for the surface 
    521 # If IMPOSE_AZE 
    522 # Surface albedo in near infrared wavelengths to be used  
    523 #  on the point if a 0-dim version of SECHIBA is used.  
    524 #  Look at the description of the forcing data for  
    525 #  the correct value. 
    526 CONDVEG_ALBNIR = 0.25 
    527 # default = 0.25 
    528  
    529 # Surface roughness (m) 
    530 # If IMPOSE_AZE 
    531 # Surface rougness to be used on the point if a 0-dim version 
    532 #  of SECHIBA is used. Look at the description of the forcing   
    533 #  data for the correct value. 
    534 CONDVEG_Z0 = 0.15 
    535 # default = 0.15_stnd 
    536  
    537 # Height to be added to the height of the first level (m) 
    538 # If IMPOSE_AZE 
    539 # ORCHIDEE assumes that the atmospheric level height is counted 
    540 #  from the zero wind level. Thus to take into account the roughness 
    541 #  of tall vegetation we need to correct this by a certain fraction 
    542 #  of the vegetation height. This is called the roughness height in 
    543 #  ORCHIDEE talk. 
    544 ROUGHHEIGHT = 0.0 
    545 # default = 0.0 
    546  
    547 # The snow albedo used by SECHIBA 
    548 # This option allows the user to impose a snow albedo. 
    549 #  Default behaviour is to use the model of snow albedo 
    550 #  developed by Chalita (1993). 
    551 CONDVEG_SNOWA = default 
    552 # default = use the model of snow albedo developed by Chalita 
    553  
    554 # Switch bare soil albedo dependent (if TRUE) on soil wetness 
    555 # If TRUE, the model for bare soil albedo is the old formulation. 
    556 #  Then it depend on the soil dry or wetness. If FALSE, it is the  
    557 #  new computation that is taken, it is only function of soil color. 
    558 ALB_BARE_MODEL = FALSE 
    559 # default = FALSE 
    560  
    561 # Initial snow mass if not found in restart 
    562 # The initial value of snow mass if its value is not found 
    563 #   in the restart file. This should only be used if the model is  
    564 #   started without a restart file. 
    565 HYDROL_SNOW = 0.0 
    566 # default = 0.0 
    567  
    568  
    569 # Initial snow age if not found in restart 
    570 # The initial value of snow age if its value is not found 
    571 #  in the restart file. This should only be used if the model is  
    572 #  started without a restart file. 
    573 HYDROL_SNOWAGE = 0.0 
    574 # default = 0.0 
    575  
    576 # Initial snow amount on ice, lakes, etc. if not found in restart 
    577 # The initial value of snow if its value is not found 
    578 #  in the restart file. This should only be used if the model is  
    579 #  started without a restart file. 
    580 HYDROL_SNOW_NOBIO = 0.0 
    581 # default = 0.0 
    582  
    583 # Initial snow age on ice, lakes, etc. if not found in restart 
    584 # The initial value of snow age if its value is not found 
    585 #  in the restart file. This should only be used if the model is  
    586 #  started without a restart file. 
    587 HYDROL_SNOW_NOBIO_AGE = 0.0 
    588 # default = 0.0 
    589  
    590 # Initial soil moisture stress if not found in restart 
    591 # The initial value of soil moisture stress if its value is not found 
    592 #  in the restart file. This should only be used if the model is  
    593 #  started without a restart file. 
    594 HYDROL_HUMR = 1.0 
    595 # default = 1.0 
    596  
    597 # Total depth of soil reservoir 
    598 HYDROL_SOIL_DEPTH = 2. 
    599 # default = 2. 
    600  
    601 # Root profile 
    602 # Default values were defined for 2 meters soil depth. 
    603 # For 4 meters soil depth, you may use those ones : 
    604 # 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
    605 HYDROL_HUMCSTE= 5.0, 0.8, 0.8, 1.0, 0.8, 0.8, 1.0, 1.0, 0.8, 4.0, 4.0, 4.0, 4.0  
    606 # default =  5., .8, .8, 1., .8, .8, 1., 1., .8, 4., 4., 4., 4. 
    607  
    608 # Initial restart deep soil moisture if not found in restart 
    609 # The initial value of deep soil moisture if its value is not found 
    610 #  in the restart file. This should only be used if the model is  
    611 #  started without a restart file. Default behaviour is a saturated soil. 
    612 HYDROL_BQSB = default 
    613 # default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2 
    614  
    615 # Initial upper soil moisture if not found in restart 
    616 # The initial value of upper soil moisture if its value is not found 
    617 #  in the restart file. This should only be used if the model is  
    618 #  started without a restart file. 
    619 HYDROL_GQSB = 0.0 
    620 # default = 0.0 
    621  
    622 # Initial upper reservoir depth if not found in restart 
    623 # The initial value of upper reservoir depth if its value is not found 
    624 #  in the restart file. This should only be used if the model is  
    625 #  started without a restart file. 
    626 HYDROL_DSG = 0.0 
    627 # default = 0.0 
    628  
    629 # Initial dry soil above upper reservoir if not found in restart 
    630 # The initial value of dry soil above upper reservoir if its value  
    631 #  in the restart file. This should only be used if the model is  
    632 #  started without a restart file. The default behaviour 
    633 #  is to compute it from the variables above. Should be OK most of  
    634 #  the time. 
    635 HYDROL_DSP = default 
    636 # default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0 
    637  
    638 # Initial water on canopy if not found in restart 
    639 # The initial value of moisture on canopy if its value  
    640 #  in the restart file. This should only be used if the model is  
    641 #  started without a restart file. 
    642 HYDROL_QSV = 0.0 
    643 # default = 0.0 
    644  
    645 # Soil moisture on each soil tile and levels 
    646 # The initial value of mc if its value is not found 
    647 #  in the restart file. This should only be used if the model is  
    648 #  started without a restart file. 
    649 HYDROL_MOISTURE_CONTENT = 0.3 
    650 # default = 0.3 
    651  
    652 # US_NVM_NSTM_NSLM 
    653 # The initial value of us (relative moisture) if its value is not found 
    654 #  in the restart file. This should only be used if the model is  
    655 #  started without a restart file. 
    656 US_INIT = 0.0 
    657 # default = 0.0 
    658  
    659 # Coefficient for free drainage at bottom 
    660 # The initial value of free drainage if its value is not found 
    661 #  in the restart file. This should only be used if the model is  
    662 #  started without a restart file. 
    663 FREE_DRAIN_COEF = 1.0, 1.0, 1.0 
    664 # default = 1.0, 1.0, 1.0 
    665  
    666 # Bare soil evap on each soil if not found in restart 
    667 # The initial value of bare soils evap if its value is not found 
    668 #  in the restart file. This should only be used if the model is  
    669 #  started without a restart file. 
    670 EVAPNU_SOIL = 0.0 
    671 # default = 0.0 
    672  
    673 # Initial temperature if not found in restart 
    674 # The initial value of surface temperature if its value is not found 
    675 #  in the restart file. This should only be used if the model is  
    676 #  started without a restart file. 
    677 ENERBIL_TSURF = 280. 
    678 # default = 280. 
    679  
    680 # Initial Soil Potential Evaporation 
    681 # The initial value of soil potential evaporation if its value  
    682 #  is not found in the restart file. This should only be used if 
    683 #  the model is started without a restart file.  
    684 ENERBIL_EVAPOT = 0.0 
    685 # default = 0.0 
    686  
    687 # Initial soil temperature profile if not found in restart 
    688 # The initial value of the temperature profile in the soil if  
    689 #   its value is not found in the restart file. This should only  
    690 #   be used if the model is started without a restart file. Here 
    691 #   we only require one value as we will assume a constant  
    692 #   throughout the column. 
    693 THERMOSOIL_TPRO = 280. 
    694 # default = 280. 
    695  
    696 # Initial leaf CO2 level if not found in restart 
    697 # The initial value of leaf_ci if its value is not found 
    698 #  in the restart file. This should only be used if the model is 
    699 #  started without a restart file. 
    700 DIFFUCO_LEAFCI = 233. 
    701 # default = 233. 
    702  
    703  
    704 # Keep cdrag coefficient from gcm. 
    705 # Set to .TRUE. if you want q_cdrag coming from GCM. 
    706 #  Keep cdrag coefficient from gcm for latent and sensible heat fluxes. 
    707 #  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs). 
     101# Use cdrag coefficient from gcm 
    708102CDRAG_FROM_GCM = y 
    709 # default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE. 
    710  
    711  
    712 # Artificial parameter to increase or decrease canopy resistance 
    713 # Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin 
    714 # By PFT. 
    715 RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 
    716 # default = 1. 
    717  
    718103 
    719104# Interception reservoir coefficient. 
    720 # Transforms leaf area index into size of interception reservoir 
    721 #  for slowproc_derivvar or stomate. 
     105# default = 0.1 
    722106SECHIBA_QSINT = 0.02 
    723 # default = 0.1 
    724107 
     108# Parmeters related to vegetation map 
    725109#************************************************************************** 
    726 # LAND_USE 
    727 #************************************************************************** 
    728  
    729110# Read a land_use vegetation map 
    730 # pft values are needed, max time axis is 293 
     111# default = n 
    731112LAND_USE = y 
    732 # default = n 
    733113 
    734114# Year of the land_use vegetation map readed 
    735115# year off the pft map 
    736 # If LAND_USE (11 = 1860 - 1850 +1 for PFTmap.20C3M.nc, 1 for PFTmap_IPCC_2000.nc)  
     116# default = 282 
    737117VEGET_YEAR = 1 
    738 # default = 282 
    739118 
    740 # booleen to indicate that a new LAND USE file will be used (since 1.9.5 version). 
    741119# The parameter is used to bypass veget_year count  
    742120# and reinitialize it with VEGET_YEAR parameter. 
    743121# Then it is possible to change LAND USE file. 
    744122# If LAND_USE 
     123# default = y 
    745124VEGET_REINIT = n 
    746 # default = n 
    747125 
    748126# Update vegetation frequency (since 2.0 version) 
    749 # The veget datas will be update each this time step. 
    750 # If LAND_USE 
     127# The veget datas will be update at this period if LAND_USE 
     128# default = 1Y 
    751129VEGET_UPDATE = _AUTO_ 
    752 # default = 1Y 
    753130 
    754131# treat land use modifications 
     
    757134# deforestation.                                 
    758135# If LAND_USE 
     136# default = y 
    759137LAND_COVER_CHANGE = _AUTO_ 
    760 # default = y 
    761138 
    762 #************************************************************************** 
     139# Read reftemp file. Note behaviour and default value in the code has change in rev 2441 trunk ORCHIDEE 
     140# default=NONE 
     141REFTEMP_FILE=reftemp.nc 
    763142 
    764 # agriculture allowed? 
    765 # With this variable, you can determine 
    766 #  whether agriculture is allowed 
    767 AGRICULTURE = y 
    768 # default = y 
    769  
    770 # Harvert model for agricol PFTs. 
    771 # Compute harvest above ground biomass for agriculture. 
    772 # Change daily turnover. 
    773 HARVEST_AGRI = y 
    774 # default = y 
    775  
    776 # herbivores allowed? 
    777 # With this variable, you can activate herbivores  
    778 HERBIVORES = n 
    779 # default = n 
    780  
    781 # treat expansion of PFTs across a grid cell? 
    782 # With this variable, you can determine 
    783 #  whether we treat expansion of PFTs across a 
    784 #  grid cell. 
    785 TREAT_EXPANSION = n 
    786 # default = n 
    787  
    788 #************************************************************************** 
    789  
    790 # Time within the day simulated 
    791 # This is the time spent simulating the current day. This variable is 
    792 #  prognostic as it will trigger all the computations which are 
    793 #  only done once a day. 
    794 SECHIBA_DAY = 0.0 
    795 # default = 0.0 
    796  
    797 # Time step of STOMATE and other slow processes 
    798 # Time step (s) of regular update of vegetation 
    799 #  cover, LAI etc. This is also the time step 
    800 #  of STOMATE. 
    801 DT_SLOW = 86400. 
    802 # default = un_jour = 86400. 
    803  
    804 #************************************************************************** 
    805  
    806 # Allows to switch on the multilayer hydrology of CWRR 
    807 # This flag allows the user to decide if the vertical 
    808 #  hydrology should be treated using the multi-layer  
    809 #  diffusion scheme adapted from CWRR by Patricia de Rosnay. 
    810 #  by default the Choisnel hydrology is used. 
    811 HYDROL_CWRR = y  
    812 # default = n 
    813  
    814 # do horizontal diffusion? 
    815 # If TRUE, then water can diffuse horizontally between 
    816 #  the PFTs' water reservoirs. 
    817 HYDROL_OK_HDIFF = n 
    818 # default = n 
    819   
    820  
    821 # time scale (s) for horizontal diffusion of water 
    822 # If HYDROL_OK_HDIFF 
    823 # Defines how fast diffusion occurs horizontally between 
    824 #  the individual PFTs' water reservoirs. If infinite, no 
    825 #  diffusion. 
    826 HYDROL_TAU_HDIFF = 1800. 
    827 # default = 86400. 
    828  
    829 # Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8). 
    830 # During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall 
    831 #  will get directly to the ground without being intercepted, for each PFT.. 
    832 PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    833 # default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    834  
    835 # Decides if we route the water or not 
    836 # This flag allows the user to decide if the runoff 
    837 #  and drainage should be routed to the ocean 
    838 #  and to downstream grid boxes. 
    839 RIVER_ROUTING = y 
    840 # default = n 
    841  
    842 # Name of file which contains the routing information 
    843 # The file provided here should allow the routing module to 
    844 #  read the high resolution grid of basins and the flow direction  
    845 #  from one mesh to the other. 
    846 ROUTING_FILE = routing.nc 
    847 # default = routing.nc 
    848  
    849 # Time step of the routing scheme 
    850 # If RIVER_ROUTING 
    851 # This values gives the time step in seconds of the routing scheme.  
    852 #   It should be multiple of the main time step of ORCHIDEE. One day 
    853 #   is a good value. 
    854 ROUTING_TIMESTEP = 86400 
    855 # default = 86400 
    856  
    857 # Number of rivers  
    858 # If RIVER_ROUTING 
    859 # This parameter chooses the number of largest river basins 
    860 #  which should be treated as independently as rivers and not 
    861 #  flow into the oceans as diffusion coastal flow. 
    862 ROUTING_RIVERS = 50 
    863 # default = 50 
    864  
    865 # Should we compute an irrigation flux  
    866 # This parameters allows the user to ask the model 
    867 #  to compute an irigation flux. This performed for the 
    868 #  on very simple hypothesis. The idea is to have a good 
    869 #  map of irrigated areas and a simple function which estimates 
    870 #  the need to irrigate. 
    871 DO_IRRIGATION = n 
    872 # default = n 
    873  
    874 # Name of file which contains the map of irrigated areas 
    875 # If IRRIGATE 
    876 # The name of the file to be opened to read the field 
    877 #  with the area in m^2 of the area irrigated within each 
    878 #  0.5 0.5 deg grid box. The map currently used is the one 
    879 #  developed by the Center for Environmental Systems Research  
    880 #  in Kassel (1995). 
    881 IRRIGATION_FILE = irrigated.nc 
    882 # default = irrigated.nc 
    883  
    884 # Should we include floodplains  
    885 # This parameters allows the user to ask the model 
    886 #  to take into account the flood plains and return  
    887 #  the water into the soil moisture. It then can go  
    888 #  back to the atmopshere. This tried to simulate  
    889 #  internal deltas of rivers. 
    890 DO_FLOODPLAINS = n 
    891 # default = n 
    892  
    893 # Use XIOS for writing diagnostics file 
    894 # defulat = n 
    895 XIOS_ORCHIDEE_OK = _AUTO_ 
    896 #************************************************************************** 
  • CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/orchidee.def_Choi

    r2338 r2410  
    11# 
    22#************************************************************************** 
    3 #                    Namelist for ORCHIDEE 
    4 #************************************************************************** 
    5 # 
    6 # 
    7 #************************************************************************** 
    8 #          OPTIONS NOT SET 
    9 #************************************************************************** 
    10 # 
    11 # 
    12 #************************************************************************** 
    13 #          Management of display in the run of ORCHIDEE 
     3#                    Parameter file list for ORCHIDEE 
    144#************************************************************************** 
    155 
    16 # Model chatting level 
    17 # level of online diagnostics in STOMATE (0-4) 
    18 # With this variable, you can determine how much online information STOMATE 
    19 #  gives during the run. 0 means virtually no info. 
    20 BAVARD = 1 
     6# Input and output 
     7#************************************************************************** 
     8# Restart the time from the GCM.  
     9# default = n 
     10SECHIBA_reset_time = y 
     11 
     12# Name of restart to read for initial conditions 
     13# default = NONE 
     14SECHIBA_restart_in = _AUTOBLOCKER_ 
     15 
     16# Name of restart to read for initial conditions of STOMATE 
     17# default = NONE 
     18STOMATE_RESTART_FILEIN = _AUTOBLOCKER_ 
     19 
     20# Use XIOS for writing diagnostics file 
     21# defulat = n 
     22XIOS_ORCHIDEE_OK = _AUTO_ 
     23 
     24# Flag to activate sechiba_out_2.nc history file for SECHIBA 
     25# default  = FALSE 
     26SECHIBA_HISTFILE2 = _AUTO_ 
     27 
     28# SECHIBA history output level (0..10) 
     29# default = 5 
     30SECHIBA_HISTLEVEL = _AUTO_ 
     31 
     32# SECHIBA history 2 output level (0..10) 
    2133# default = 1 
     34SECHIBA_HISTLEVEL2 = _AUTO_ 
    2235 
    23 # Flag for debug information 
    24 # This option allows to switch on the output of debug 
    25 #         information without recompiling the code. 
    26 DEBUG_INFO = n 
    27 #default = n 
     36# STOMATE history output level (0..10) 
     37# default = 10 
     38STOMATE_HISTLEVEL = _AUTO_ 
    2839 
    29 # ORCHIDEE will print more messages 
    30 # This flag permits to print more debug messages in the run. 
    31 LONGPRINT = n 
    32 #default = n 
     40# Writefrequency in seconds in sechiba_history.nc 
     41# default = 86400.0 
     42WRITE_STEP = _AUTO_ 
    3343 
    34 #--------------------------------------------------------------------- 
     44# Writefrequency in seconds sechiba_out_2.nc  
     45# default = 1800.0 
     46WRITE_STEP2 = _AUTO_ 
    3547 
    36 # To reset the time coming from SECHIBA restart file 
    37 # This option allows the model to override the time 
    38 #  found in the restart file of SECHIBA with the time 
    39 #  of the first call. That is the restart time of the GCM. 
    40 SECHIBA_reset_time = y 
     48# Writefrequency in days in stomate_history.nc 
     49# default = 10. 
     50STOMATE_HIST_DT = _AUTO_ 
     51 
     52# Writefrequency in days or -1 for monthly output in stomate_ipcc_history.nc 
     53# default = 0. 
     54STOMATE_IPCC_HIST_DT = -1 
     55 
     56 
     57# Hydrology parameters 
     58#************************************************************************** 
     59# Activate the multi-layer diffusion scheme adapted from CWRR 
     60# by default the Choisnel hydrology is used. 
    4161# default = n 
     62HYDROL_CWRR = n  
     63 
     64# Total depth of soil reservoir 
     65# default = 2./4. depending on HYDROL_CWRR 
     66HYDROL_SOIL_DEPTH = 4. 
     67 
     68# Root profile 
     69HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
     70 
     71# Activate river routing 
     72# default = n 
     73RIVER_ROUTING = y 
     74 
    4275 
    4376#************************************************************************** 
    44 #          Files : incoming / forcing / restart /output 
    45 #************************************************************************** 
    46 # Ancillary files : 
    47 #--------------------------------------------------------------------- 
     77# Activate Stomate component 
     78# default = n 
     79STOMATE_OK_STOMATE = _AUTOBLOCKER_  
    4880 
    49 # Name of file from which the vegetation map is to be read 
    50 # If !IMPOSE_VEG 
    51 # If LAND_USE  
    52 #   default = pft_new.nc 
    53 #   The name of the file to be opened to read a vegetation 
    54 #   map (in pft) is to be given here.  
    55 # If !LAND_USE 
    56 #   default = ../surfmap/carteveg5km.nc 
    57 #   The name of the file to be opened to read the vegetation 
    58 #   map is to be given here. Usualy SECHIBA runs with a 5kmx5km 
    59 #   map which is derived from the IGBP one. We assume that we have 
    60 #   a classification in 87 types. This is Olson modified by Viovy. 
    61 VEGETATION_FILE = PFTmap.nc 
     81# Activate calculations of CO2 according to Farqhuar and Ball 
     82# default = n 
     83STOMATE_OK_CO2 = y 
    6284 
    63  
    64 # Name of file from which the bare soil albedo 
    65 # If !IMPOSE_AZE 
    66 # The name of the file to be opened to read the soil types from  
    67 #  which we derive then the bare soil albedos. This file is 1x1  
    68 #  deg and based on the soil colors defined by Wilson and Henderson-Seller. 
    69 SOILALB_FILE = soils_param.nc 
    70 # default = ../surfmap/soils_param.nc 
    71  
    72 # Name of file from which soil types are read 
    73 # If !IMPOSE_VEG 
    74 # The name of the file to be opened to read the soil types.  
    75 #  The data from this file is then interpolated to the grid of 
    76 #  of the model. The aim is to get fractions for sand loam and 
    77 #  clay in each grid box. This information is used for soil hydrology 
    78 #  and respiration. 
    79 #  This parameter change name in newer ORCHIDEE versions; SOILTYPE_FILE=>SOILCLASS_FILE 
    80 SOILTYPE_FILE = soils_param.nc 
    81 SOILCLASS_FILE= soils_param.nc 
    82 # default = ../surfmap/soils_param.nc 
    83  
    84 # Name of file from which the reference 
    85 # The name of the file to be opened to read 
    86 #  temperature is read 
    87 #  the reference surface temperature. 
    88 #  The data from this file is then interpolated 
    89 #  to the grid of the model. 
    90 #  The aim is to get a reference temperature either 
    91 #  to initialize the corresponding prognostic model 
    92 #  variable correctly (ok_dgvm = TRUE) or to impose it 
    93 #  as boundary condition (ok_dgvm = FALSE) 
    94 REFTEMP_FILE = reftemp.nc 
    95 # default = reftemp.nc 
    96  
    97 # Name of file containg information about topography. 
    98 TOPOGRAPHY_FILE =cartepente2d_15min.nc 
    99  
    100 # Input and output restart file for SECHIBA : 
    101 #--------------------------------------------------------------------- 
    102  
    103 # Name of restart to READ for initial conditions 
    104 # This is the name of the file which will be opened 
    105 #  to extract the initial values of all prognostic 
    106 #  values of the model. This has to be a netCDF file. 
    107 #  Not truly COADS compliant. NONE will mean that 
    108 #  no restart file is to be expected. 
    109 SECHIBA_restart_in = _AUTO_ 
    110 # default = NONE 
    111  
    112 # Name of restart files to be created by SECHIBA 
    113 # This variable give the name for the restart files.  
    114 #  The restart software within IOIPSL will add .nc if needed. 
    115 SECHIBA_rest_out = sechiba_rest_out.nc 
    116 # default = sechiba_rest_out.nc 
    117  
    118 # Input and output restart file for STOMATE : 
    119 #--------------------------------------------------------------------- 
    120  
    121 # Name of restart to READ for initial conditions of STOMATE 
    122 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    123 # This is the name of the file which will be opened of STOMATE 
    124 #   to extract the initial values of all prognostic values of STOMATE. 
    125 STOMATE_RESTART_FILEIN = _AUTO_ 
    126 # default = NONE 
    127  
    128 # Name of restart files to be created by STOMATE 
    129 # If STOMATE_OK_STOMATE || STOMATE_WATCHOUT 
    130 # This is the name of the file which will be opened 
    131 #        to write the final values of all prognostic values 
    132 #        of STOMATE. 
    133 STOMATE_RESTART_FILEOUT = stomate_rest_out.nc 
    134 # default = stomate_restart.nc 
    135  
    136 # Forcing files for TESTSTOMATE and FORCESOIL 
    137 #--------------------------------------------------------------------- 
    138  
    139 # Name of STOMATE's forcing file 
    140 # Name that will be given to STOMATE's offline forcing file 
    141 #STOMATE_FORCING_NAME = stomate_forcing.nc 
    142 #default = NONE 
    143  
    144 # Size of STOMATE forcing data in memory (MB) 
    145 # This variable determines how many 
    146 #  forcing states will be kept in memory. 
    147 #  Must be a compromise between memory 
    148 #  use and frequeny of disk access. 
    149 STOMATE_FORCING_MEMSIZE = 50 
    150 # default = 50 
    151  
    152 # Name of STOMATE's carbon forcing file 
    153 # Name that will be given to STOMATE's carbon offline forcing file 
    154 #STOMATE_CFORCING_NAME = stomate_Cforcing.nc 
    155 # default = NONE 
    156  
    157  
    158 # Produced forcing file name (SECHIBA puis STOMATE) : 
    159 #--------------------------------------------------------------------- 
    160  
    161 # ORCHIDEE will write out its forcing to a file 
    162 # This flag allows to write to a file all the variables 
    163 #  which are used to force the land-surface. The file  
    164 #  has exactly the same format than a normal off-line forcing 
    165 #  and thus this forcing can be used for forcing ORCHIDEE. 
    166 #ORCHIDEE_WATCHOUT = y 
    167 # default = n 
    168  
    169 # Filenane for the ORCHIDEE forcing file 
    170 # If ORCHIDEE_WATCHOUT 
    171 # This is the name of the file in which the 
    172 #  forcing used here will be written for later use.  
    173 WATCHOUT_FILE = orchidee_watchout.nc 
    174 # default = orchidee_watchout.nc 
    175  
    176 # ORCHIDEE will write out with this frequency 
    177 # If ORCHIDEE_WATCHOUT 
    178 # This flag indicates the frequency of the write of the variables.  
    179 DT_WATCHOUT = 1800 
    180 # default = dt 
    181  
    182 # STOMATE does minimum service 
    183 # set to TRUE if you want STOMATE to read 
    184 #  and write its start files and keep track 
    185 #  of longer-term biometeorological variables. 
    186 #  This is useful if OK_STOMATE is not set, 
    187 #  but if you intend to activate STOMATE later. 
    188 #  In that case, this run can serve as a  
    189 #  spinup for longer-term biometeorological 
    190 #  variables. 
    191 #STOMATE_WATCHOUT = y 
    192 # default = n 
    193  
    194 # Output file name (SECHIBA and STOMATE) : 
    195 #--------------------------------------------------------------------- 
    196 # Name of file in which the output is going 
    197 # This file is going to be created by the model 
    198 #  to be written 
    199 #  and will contain the output from the model. 
    200 #  This file is a truly COADS compliant netCDF file. 
    201 #  It will be generated by the hist software from 
    202 #  the IOIPSL package. 
    203 OUTPUT_FILE = sechiba_history.nc 
    204 # default = cabauw_out.nc 
    205  
    206 # Flag to switch on histfile 2 for SECHIBA (hi-frequency ?) 
    207 # This Flag switch on the second SECHIBA writing for hi (or low)  
    208 #  frequency writing. This second output is optional and not written 
    209 #  by default. 
    210 SECHIBA_HISTFILE2 = _AUTO_ 
    211 # default  = FALSE 
    212  
    213 # Name of file in which the output number 2 is going 
    214 #   to be written 
    215 # If SECHIBA_HISTFILE2 
    216 # This file is going to be created by the model 
    217 #   and will contain the output 2 from the model. 
    218 SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc 
    219 # default  = sechiba_out_2.nc 
    220  
    221 # Name of file in which STOMATE's output is going to be written 
    222 # This file is going to be created by the model 
    223 #  and will contain the output from the model. 
    224 #  This file is a truly COADS compliant netCDF file. 
    225 #  It will be generated by the hist software from 
    226 #  the IOIPSL package. 
    227 STOMATE_OUTPUT_FILE = stomate_history.nc 
    228 # default = stomate_history.nc 
    229  
    230 # Write levels for outputs files (number of variables) : 
    231 #--------------------------------------------------------------------- 
    232  
    233 # SECHIBA history output level (0..10) 
    234 # Chooses the list of variables in the history file.  
    235 #  Values between 0: nothing is written; 10: everything is  
    236 #  written are available More details can be found on the web under documentation. 
    237 #  web under documentation. 
    238 SECHIBA_HISTLEVEL = _AUTO_ 
    239 # default = 5 
    240  
    241 # SECHIBA history 2 output level (0..10) 
    242 # If SECHIBA_HISTFILE2 
    243 # Chooses the list of variables in the history file.  
    244 #   Values between 0: nothing is written; 10: everything is  
    245 #   written are available More details can be found on the web under documentation. 
    246 #   web under documentation. 
    247 # First level contains all ORCHIDEE outputs. 
    248 SECHIBA_HISTLEVEL2 = _AUTO_ 
    249 # default = 1 
    250  
    251 # STOMATE history output level (0..10) 
    252 #  0: nothing is written; 10: everything is written 
    253 STOMATE_HISTLEVEL = _AUTO_ 
    254 # default = 10 
    255  
    256 #-------------------------------------------------------------------- 
    257 # STOMATE_IPCC_OUTPUT_FILE 
    258 # This file is going to be created by the model 
    259 #    and will contain the output from the model. 
    260 #    This file is a truly COADS compliant netCDF file. 
    261 #    It will be generated by the hist software from 
    262 #    the IOIPSL package. 
    263 # Name of file in which STOMATE's output is going 
    264 # to be written 
    265 STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc 
    266 # default = stomate_ipcc_history.nc 
    267  
    268 # STOMATE_IPCC_HIST_DT 
    269 # Time step of the STOMATE IPCC history file 
    270 # STOMATE IPCC history time step (d) 
    271 STOMATE_IPCC_HIST_DT = -1 
    272 # default = 0. 
    273  
    274 # Write frequency for output files (SECHIBA in seconds et 
    275 # STOMATE in days) : 
    276 #--------------------------------------------------------------------- 
    277 # Frequency in seconds at which to WRITE output 
    278 # This variables gives the frequency the output of 
    279 #  the model should be written into the netCDF file. 
    280 #  It does not affect the frequency at which the 
    281 #  operations such as averaging are done. 
    282 WRITE_STEP = _AUTO_ 
    283 # default = 86400.0 
    284  
    285 # Frequency in seconds at which to WRITE output 
    286 # If SECHIBA_HISTFILE2 
    287 # This variables gives the frequency the output 2 of 
    288 #   the model should be written into the netCDF file. 
    289 #   It does not affect the frequency at which the 
    290 #   operations such as averaging are done. 
    291 #   That is IF the coding of the calls to histdef 
    292 #   are correct ! 
    293 WRITE_STEP2 = _AUTO_ 
    294 # default = 1800.0 
    295  
    296 # STOMATE history time step (d) 
    297 # Time step of the STOMATE history file 
    298 # Care : this variable must be higher than DT_SLOW 
    299 STOMATE_HIST_DT = _AUTO_ 
    300 # default = 10. 
    301  
    302 #--------------------------------------------------------------------- 
    303 # FORCESOIL CARBON spin up parametrization 
    304 #--------------------------------------------------------------------- 
    305  
    306 # Number of time steps per year for carbon spinup. 
    307 FORCESOIL_STEP_PER_YEAR = 12 
    308 # default = 12 
    309  
    310 # Number of years saved for carbon spinup. 
    311 FORCESOIL_NB_YEAR = 1 
    312 # default = 1 
    313  
    314 #--------------------------------------------------------------------- 
    315 # Parametrization : 
    316 #--------------------------------------------------------------------- 
    317  
    318 # Activate STOMATE? 
    319 # set to TRUE if STOMATE is to be activated 
    320 # STOMATE_OK_STOMATE will be set to y or n by orchidee.driver depending on activation of stomate component SBG in config.card 
    321 STOMATE_OK_STOMATE = _AUTO_  
    322 # default = n 
    323  
    324 # Activate DGVM? 
    325 # set to TRUE if Dynamic Vegetation DGVM is to be activated 
    326 STOMATE_OK_DGVM = n 
    327 # default = n 
    328  
    329 # Activate CO2? 
    330 # set to TRUE if photosynthesis is to be activated 
    331 STOMATE_OK_CO2 = y 
    332 # default = n 
    333  
    334 # Flag to force the value of atmospheric CO2 for vegetation. 
    335 # If this flag is set to true, the ATM_CO2 parameter is used 
    336 #  to prescribe the atmospheric CO2. 
    337 # This Flag is only use in couple mode. 
    338 FORCE_CO2_VEG = FALSE 
    339 # default = FALSE 
    340  
    341 # Value for atm CO2. 
    342 # If FORCE_CO2_VEG (in not forced mode) 
    343 # Value to prescribe the atm CO2. 
    344 #  For pre-industrial simulations, the value is 286.2 . 
    345 #  348. for 1990 year. 
    346 ATM_CO2 = 350. 
    347 # default = 350. 
    348  
    349 # constant tree mortality 
    350 # If yes, then a constant mortality is applied to trees.  
    351 #  Otherwise, mortality is a function of the trees'  
    352 #  vigour (as in LPJ). 
    353 LPJ_GAP_CONST_MORT = y 
    354 # default = y 
    355  
    356 # no fire allowed 
    357 # With this variable, you can allow or not 
    358 #  the estimation of CO2 lost by fire 
    359 FIRE_DISABLE = n 
    360 # default = n 
    361  
    362 # Average method for z0 
    363 # If this flag is set to true (y) then the neutral Cdrag 
    364 #  is averaged instead of the log(z0). This should be 
    365 #  the prefered option. We still wish to keep the other 
    366 #  option so we can come back if needed. If this is 
    367 #  desired then one should set Z0CDRAG_AVE = n 
    368 Z0CDRAG_AVE = y 
    369 # default = y 
    370  
    371 # parameters describing the surface (vegetation + soil) : 
    372 #--------------------------------------------------------------------- 
    373 # 
    374 # Should the vegetation be prescribed 
    375 # This flag allows the user to impose a vegetation distribution 
    376 #  and its characterisitcs. It is espacially interesting for 0D 
    377 #  simulations. On the globe it does not make too much sense as 
    378 #  it imposes the same vegetation everywhere 
    379 IMPOSE_VEG = n 
    380 # default = n 
    381  
    382 # Flag to use old "interpolation" of vegetation map. 
    383 # IF NOT IMPOSE_VEG and NOT LAND_USE 
    384 #  If you want to recover the old (ie orchidee_1_2 branch)  
    385 #   "interpolation" of vegetation map. 
    386 SLOWPROC_VEGET_OLD_INTERPOL = n 
    387 # default = n 
    388  
    389 # Vegetation distribution within the mesh (0-dim mode) 
    390 # If IMPOSE_VEG 
    391 # The fraction of vegetation is read from the restart file. If 
    392 #  it is not found there we will use the values provided here. 
    393 SECHIBA_VEG__01 = 0.2 
    394 SECHIBA_VEG__02 = 0.0 
    395 SECHIBA_VEG__03 = 0.0 
    396 SECHIBA_VEG__04 = 0.0 
    397 SECHIBA_VEG__05 = 0.0 
    398 SECHIBA_VEG__06 = 0.0 
    399 SECHIBA_VEG__07 = 0.0 
    400 SECHIBA_VEG__08 = 0.0 
    401 SECHIBA_VEG__09 = 0.0 
    402 SECHIBA_VEG__10 = 0.8 
    403 SECHIBA_VEG__11 = 0.0 
    404 SECHIBA_VEG__12 = 0.0 
    405 SECHIBA_VEG__13 = 0.0 
    406 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    407  
    408 # Maximum vegetation distribution within the mesh (0-dim mode) 
    409 # If IMPOSE_VEG 
    410 # The fraction of vegetation is read from the restart file. If 
    411 #  it is not found there we will use the values provided here. 
    412 SECHIBA_VEGMAX__01 = 0.2 
    413 SECHIBA_VEGMAX__02 = 0.0 
    414 SECHIBA_VEGMAX__03 = 0.0 
    415 SECHIBA_VEGMAX__04 = 0.0 
    416 SECHIBA_VEGMAX__05 = 0.0 
    417 SECHIBA_VEGMAX__06 = 0.0 
    418 SECHIBA_VEGMAX__07 = 0.0 
    419 SECHIBA_VEGMAX__08 = 0.0 
    420 SECHIBA_VEGMAX__09 = 0.0 
    421 SECHIBA_VEGMAX__10 = 0.8 
    422 SECHIBA_VEGMAX__11 = 0.0 
    423 SECHIBA_VEGMAX__12 = 0.0 
    424 SECHIBA_VEGMAX__13 = 0.0 
    425 # default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 
    426  
    427 # LAI for all vegetation types (0-dim mode) 
    428 # If IMPOSE_VEG 
    429 # The maximum LAI used in the 0dim mode. The values should be found 
    430 #  in the restart file. The new values of LAI will be computed anyway 
    431 #  at the end of the current day. The need for this variable is caused 
    432 #  by the fact that the model may stop during a day and thus we have not 
    433 #  yet been through the routines which compute the new surface conditions. 
    434 SECHIBA_LAI__01 = 0. 
    435 SECHIBA_LAI__02 = 8. 
    436 SECHIBA_LAI__03 = 8. 
    437 SECHIBA_LAI__04 = 4. 
    438 SECHIBA_LAI__05 = 4.5 
    439 SECHIBA_LAI__06 = 4.5 
    440 SECHIBA_LAI__07 = 4. 
    441 SECHIBA_LAI__08 = 4.5 
    442 SECHIBA_LAI__09 = 4. 
    443 SECHIBA_LAI__10 = 2. 
    444 SECHIBA_LAI__11 = 2. 
    445 SECHIBA_LAI__12 = 2. 
    446 SECHIBA_LAI__13 = 2. 
    447 # default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2. 
    448  
    449 # Height for all vegetation types (m) 
    450 # If IMPOSE_VEG 
    451 # The height used in the 0dim mode. The values should be found 
    452 #  in the restart file. The new values of height will be computed anyway 
    453 #  at the end of the current day. The need for this variable is caused 
    454 #  by the fact that the model may stop during a day and thus we have not 
    455 #  yet been through the routines which compute the new surface conditions. 
     85# Prescribed height of vegetation 
     86# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    45687SLOWPROC_HEIGHT__01 = 0. 
    45788SLOWPROC_HEIGHT__02 = 50. 
     
    46798SLOWPROC_HEIGHT__12 = .4 
    46899SLOWPROC_HEIGHT__13 = .4 
    469 # default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 
    470100 
    471  
    472 # Fraction of the 3 soil types (0-dim mode) 
    473 # If IMPOSE_VEG 
    474 # Determines the fraction for the 3 soil types 
    475 #  in the mesh in the following order : sand loam and clay. 
    476 SOIL_FRACTIONS__01 = 0.28 
    477 SOIL_FRACTIONS__02 = 0.52 
    478 SOIL_FRACTIONS__03 = 0.20 
    479 # default = 0.28, 0.52, 0.20 
    480  
    481 # Fraction of other surface types within the mesh (0-dim mode) 
    482 # If IMPOSE_VEG 
    483 # The fraction of ice, lakes, etc. is read from the restart file. If 
    484 #  it is not found there we will use the values provided here. 
    485 #  For the moment, there is only ice. 
    486 SECHIBA_FRAC_NOBIO = 0.0 
    487 # default = 0.0 
    488  
    489 # Fraction of the clay fraction (0-dim mode) 
    490 # If IMPOSE_VEG 
    491 # Determines the fraction of clay in the grid box. 
    492 CLAY_FRACTION = 0.2 
    493 # default = 0.2 
    494  
    495 # Should the surface parameters be prescribed 
    496 # This flag allows the user to impose the surface parameters 
    497 #  (Albedo Roughness and Emissivity). It is espacially interesting for 0D 
    498 #  simulations. On the globe it does not make too much sense as 
    499 #  it imposes the same vegetation everywhere 
    500 IMPOSE_AZE = n 
    501 # default = n 
    502  
    503 # Emissivity of the surface for LW radiation 
    504 # If IMPOSE_AZE 
    505 # The surface emissivity used for compution the LE emission 
    506 #  of the surface in a 0-dim version. Values range between  
    507 #  0.97 and 1.. The GCM uses 0.98. 
    508 CONDVEG_EMIS = 1.0 
    509 # default = 1.0 
    510  
    511 # SW visible albedo for the surface 
    512 # If IMPOSE_AZE 
    513 # Surface albedo in visible wavelengths to be used  
    514 #  on the point if a 0-dim version of SECHIBA is used.  
    515 #  Look at the description of the forcing data for  
    516 #  the correct value. 
    517 CONDVEG_ALBVIS = 0.25 
    518 # default = 0.25 
    519  
    520 # SW near infrared albedo for the surface 
    521 # If IMPOSE_AZE 
    522 # Surface albedo in near infrared wavelengths to be used  
    523 #  on the point if a 0-dim version of SECHIBA is used.  
    524 #  Look at the description of the forcing data for  
    525 #  the correct value. 
    526 CONDVEG_ALBNIR = 0.25 
    527 # default = 0.25 
    528  
    529 # Surface roughness (m) 
    530 # If IMPOSE_AZE 
    531 # Surface rougness to be used on the point if a 0-dim version 
    532 #  of SECHIBA is used. Look at the description of the forcing   
    533 #  data for the correct value. 
    534 CONDVEG_Z0 = 0.15 
    535 # default = 0.15_stnd 
    536  
    537 # Height to be added to the height of the first level (m) 
    538 # If IMPOSE_AZE 
    539 # ORCHIDEE assumes that the atmospheric level height is counted 
    540 #  from the zero wind level. Thus to take into account the roughness 
    541 #  of tall vegetation we need to correct this by a certain fraction 
    542 #  of the vegetation height. This is called the roughness height in 
    543 #  ORCHIDEE talk. 
    544 ROUGHHEIGHT = 0.0 
    545 # default = 0.0 
    546  
    547 # The snow albedo used by SECHIBA 
    548 # This option allows the user to impose a snow albedo. 
    549 #  Default behaviour is to use the model of snow albedo 
    550 #  developed by Chalita (1993). 
    551 CONDVEG_SNOWA = default 
    552 # default = use the model of snow albedo developed by Chalita 
    553  
    554 # Switch bare soil albedo dependent (if TRUE) on soil wetness 
    555 # If TRUE, the model for bare soil albedo is the old formulation. 
    556 #  Then it depend on the soil dry or wetness. If FALSE, it is the  
    557 #  new computation that is taken, it is only function of soil color. 
    558 ALB_BARE_MODEL = FALSE 
    559 # default = FALSE 
    560  
    561 # Initial snow mass if not found in restart 
    562 # The initial value of snow mass if its value is not found 
    563 #   in the restart file. This should only be used if the model is  
    564 #   started without a restart file. 
    565 HYDROL_SNOW = 0.0 
    566 # default = 0.0 
    567  
    568  
    569 # Initial snow age if not found in restart 
    570 # The initial value of snow age if its value is not found 
    571 #  in the restart file. This should only be used if the model is  
    572 #  started without a restart file. 
    573 HYDROL_SNOWAGE = 0.0 
    574 # default = 0.0 
    575  
    576 # Initial snow amount on ice, lakes, etc. if not found in restart 
    577 # The initial value of snow if its value is not found 
    578 #  in the restart file. This should only be used if the model is  
    579 #  started without a restart file. 
    580 HYDROL_SNOW_NOBIO = 0.0 
    581 # default = 0.0 
    582  
    583 # Initial snow age on ice, lakes, etc. if not found in restart 
    584 # The initial value of snow age if its value is not found 
    585 #  in the restart file. This should only be used if the model is  
    586 #  started without a restart file. 
    587 HYDROL_SNOW_NOBIO_AGE = 0.0 
    588 # default = 0.0 
    589  
    590 # Initial soil moisture stress if not found in restart 
    591 # The initial value of soil moisture stress if its value is not found 
    592 #  in the restart file. This should only be used if the model is  
    593 #  started without a restart file. 
    594 HYDROL_HUMR = 1.0 
    595 # default = 1.0 
    596  
    597 # Total depth of soil reservoir 
    598 HYDROL_SOIL_DEPTH = 4. 
    599 # default = 2. 
    600  
    601 # Root profile 
    602 # Default values were defined for 2 meters soil depth. 
    603 # For 4 meters soil depth, you may use those ones : 
    604 # 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
    605 HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1. 
    606 # default =  5., .8, .8, 1., .8, .8, 1., 1., .8, 4., 4., 4., 4. 
    607  
    608 # Initial restart deep soil moisture if not found in restart 
    609 # The initial value of deep soil moisture if its value is not found 
    610 #  in the restart file. This should only be used if the model is  
    611 #  started without a restart file. Default behaviour is a saturated soil. 
    612 HYDROL_BQSB = default 
    613 # default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2 
    614  
    615 # Initial upper soil moisture if not found in restart 
    616 # The initial value of upper soil moisture if its value is not found 
    617 #  in the restart file. This should only be used if the model is  
    618 #  started without a restart file. 
    619 HYDROL_GQSB = 0.0 
    620 # default = 0.0 
    621  
    622 # Initial upper reservoir depth if not found in restart 
    623 # The initial value of upper reservoir depth if its value is not found 
    624 #  in the restart file. This should only be used if the model is  
    625 #  started without a restart file. 
    626 HYDROL_DSG = 0.0 
    627 # default = 0.0 
    628  
    629 # Initial dry soil above upper reservoir if not found in restart 
    630 # The initial value of dry soil above upper reservoir if its value  
    631 #  in the restart file. This should only be used if the model is  
    632 #  started without a restart file. The default behaviour 
    633 #  is to compute it from the variables above. Should be OK most of  
    634 #  the time. 
    635 HYDROL_DSP = default 
    636 # default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0 
    637  
    638 # Initial water on canopy if not found in restart 
    639 # The initial value of moisture on canopy if its value  
    640 #  in the restart file. This should only be used if the model is  
    641 #  started without a restart file. 
    642 HYDROL_QSV = 0.0 
    643 # default = 0.0 
    644  
    645 # Soil moisture on each soil tile and levels 
    646 # The initial value of mc if its value is not found 
    647 #  in the restart file. This should only be used if the model is  
    648 #  started without a restart file. 
    649 HYDROL_MOISTURE_CONTENT = 0.3 
    650 # default = 0.3 
    651  
    652 # US_NVM_NSTM_NSLM 
    653 # The initial value of us (relative moisture) if its value is not found 
    654 #  in the restart file. This should only be used if the model is  
    655 #  started without a restart file. 
    656 US_INIT = 0.0 
    657 # default = 0.0 
    658  
    659 # Coefficient for free drainage at bottom 
    660 # The initial value of free drainage if its value is not found 
    661 #  in the restart file. This should only be used if the model is  
    662 #  started without a restart file. 
    663 FREE_DRAIN_COEF = 1.0, 1.0, 1.0 
    664 # default = 1.0, 1.0, 1.0 
    665  
    666 # Bare soil evap on each soil if not found in restart 
    667 # The initial value of bare soils evap if its value is not found 
    668 #  in the restart file. This should only be used if the model is  
    669 #  started without a restart file. 
    670 EVAPNU_SOIL = 0.0 
    671 # default = 0.0 
    672  
    673 # Initial temperature if not found in restart 
    674 # The initial value of surface temperature if its value is not found 
    675 #  in the restart file. This should only be used if the model is  
    676 #  started without a restart file. 
    677 ENERBIL_TSURF = 280. 
    678 # default = 280. 
    679  
    680 # Initial Soil Potential Evaporation 
    681 # The initial value of soil potential evaporation if its value  
    682 #  is not found in the restart file. This should only be used if 
    683 #  the model is started without a restart file.  
    684 ENERBIL_EVAPOT = 0.0 
    685 # default = 0.0 
    686  
    687 # Initial soil temperature profile if not found in restart 
    688 # The initial value of the temperature profile in the soil if  
    689 #   its value is not found in the restart file. This should only  
    690 #   be used if the model is started without a restart file. Here 
    691 #   we only require one value as we will assume a constant  
    692 #   throughout the column. 
    693 THERMOSOIL_TPRO = 280. 
    694 # default = 280. 
    695  
    696 # Initial leaf CO2 level if not found in restart 
    697 # The initial value of leaf_ci if its value is not found 
    698 #  in the restart file. This should only be used if the model is 
    699 #  started without a restart file. 
    700 DIFFUCO_LEAFCI = 233. 
    701 # default = 233. 
    702  
    703  
    704 # Keep cdrag coefficient from gcm. 
    705 # Set to .TRUE. if you want q_cdrag coming from GCM. 
    706 #  Keep cdrag coefficient from gcm for latent and sensible heat fluxes. 
    707 #  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs). 
     101# Use cdrag coefficient from gcm 
    708102CDRAG_FROM_GCM = y 
    709 # default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE. 
    710  
    711  
    712 # Artificial parameter to increase or decrease canopy resistance 
    713 # Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin 
    714 # By PFT. 
    715 RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 
    716 # default = 1. 
    717  
    718103 
    719104# Interception reservoir coefficient. 
    720 # Transforms leaf area index into size of interception reservoir 
    721 #  for slowproc_derivvar or stomate. 
     105# default = 0.1 
    722106SECHIBA_QSINT = 0.02 
    723 # default = 0.1 
    724107 
     108# Parmeters related to vegetation map 
    725109#************************************************************************** 
    726 # LAND_USE 
    727 #************************************************************************** 
    728  
    729110# Read a land_use vegetation map 
    730 # pft values are needed, max time axis is 293 
     111# default = n 
    731112LAND_USE = y 
    732 # default = n 
    733113 
    734114# Year of the land_use vegetation map readed 
    735115# year off the pft map 
    736 # If LAND_USE (11 = 1860 - 1850 +1 for PFTmap.20C3M.nc, 1 for PFTmap_IPCC_2000.nc)  
     116# default = 282 
    737117VEGET_YEAR = 1 
    738 # default = 282 
    739118 
    740 # booleen to indicate that a new LAND USE file will be used (since 1.9.5 version). 
    741119# The parameter is used to bypass veget_year count  
    742120# and reinitialize it with VEGET_YEAR parameter. 
    743121# Then it is possible to change LAND USE file. 
    744122# If LAND_USE 
     123# default = y 
    745124VEGET_REINIT = n 
    746 # default = n 
    747125 
    748126# Update vegetation frequency (since 2.0 version) 
    749 # The veget datas will be update each this time step. 
    750 # If LAND_USE 
     127# The veget datas will be update at this period if LAND_USE 
     128# default = 1Y 
    751129VEGET_UPDATE = _AUTO_ 
    752 # default = 1Y 
    753130 
    754131# treat land use modifications 
     
    757134# deforestation.                                 
    758135# If LAND_USE 
     136# default = y 
    759137LAND_COVER_CHANGE = _AUTO_ 
    760 # default = y 
    761138 
    762 #************************************************************************** 
     139# Read reftemp file. Note behaviour and default value in the code has change in rev 2441 trunk ORCHIDEE 
     140# default=NONE 
     141REFTEMP_FILE=reftemp.nc 
    763142 
    764 # agriculture allowed? 
    765 # With this variable, you can determine 
    766 #  whether agriculture is allowed 
    767 AGRICULTURE = y 
    768 # default = y 
    769  
    770 # Harvert model for agricol PFTs. 
    771 # Compute harvest above ground biomass for agriculture. 
    772 # Change daily turnover. 
    773 HARVEST_AGRI = y 
    774 # default = y 
    775  
    776 # herbivores allowed? 
    777 # With this variable, you can activate herbivores  
    778 HERBIVORES = n 
    779 # default = n 
    780  
    781 # treat expansion of PFTs across a grid cell? 
    782 # With this variable, you can determine 
    783 #  whether we treat expansion of PFTs across a 
    784 #  grid cell. 
    785 TREAT_EXPANSION = n 
    786 # default = n 
    787  
    788 #************************************************************************** 
    789  
    790 # Time within the day simulated 
    791 # This is the time spent simulating the current day. This variable is 
    792 #  prognostic as it will trigger all the computations which are 
    793 #  only done once a day. 
    794 SECHIBA_DAY = 0.0 
    795 # default = 0.0 
    796  
    797 # Time step of STOMATE and other slow processes 
    798 # Time step (s) of regular update of vegetation 
    799 #  cover, LAI etc. This is also the time step 
    800 #  of STOMATE. 
    801 DT_SLOW = 86400. 
    802 # default = un_jour = 86400. 
    803  
    804 #************************************************************************** 
    805  
    806 # Allows to switch on the multilayer hydrology of CWRR 
    807 # This flag allows the user to decide if the vertical 
    808 #  hydrology should be treated using the multi-layer  
    809 #  diffusion scheme adapted from CWRR by Patricia de Rosnay. 
    810 #  by default the Choisnel hydrology is used. 
    811 HYDROL_CWRR = n  
    812 # default = n 
    813  
    814 # do horizontal diffusion? 
    815 # If TRUE, then water can diffuse horizontally between 
    816 #  the PFTs' water reservoirs. 
    817 HYDROL_OK_HDIFF = n 
    818 # default = n 
    819   
    820  
    821 # time scale (s) for horizontal diffusion of water 
    822 # If HYDROL_OK_HDIFF 
    823 # Defines how fast diffusion occurs horizontally between 
    824 #  the individual PFTs' water reservoirs. If infinite, no 
    825 #  diffusion. 
    826 HYDROL_TAU_HDIFF = 1800. 
    827 # default = 86400. 
    828  
    829 # Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8). 
    830 # During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall 
    831 #  will get directly to the ground without being intercepted, for each PFT.. 
    832 PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    833 # default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30. 
    834  
    835 # Decides if we route the water or not 
    836 # This flag allows the user to decide if the runoff 
    837 #  and drainage should be routed to the ocean 
    838 #  and to downstream grid boxes. 
    839 RIVER_ROUTING = y 
    840 # default = n 
    841  
    842 # Name of file which contains the routing information 
    843 # The file provided here should allow the routing module to 
    844 #  read the high resolution grid of basins and the flow direction  
    845 #  from one mesh to the other. 
    846 ROUTING_FILE = routing.nc 
    847 # default = routing.nc 
    848  
    849 # Time step of the routing scheme 
    850 # If RIVER_ROUTING 
    851 # This values gives the time step in seconds of the routing scheme.  
    852 #   It should be multiple of the main time step of ORCHIDEE. One day 
    853 #   is a good value. 
    854 ROUTING_TIMESTEP = 86400 
    855 # default = 86400 
    856  
    857 # Number of rivers  
    858 # If RIVER_ROUTING 
    859 # This parameter chooses the number of largest river basins 
    860 #  which should be treated as independently as rivers and not 
    861 #  flow into the oceans as diffusion coastal flow. 
    862 ROUTING_RIVERS = 50 
    863 # default = 50 
    864  
    865 # Should we compute an irrigation flux  
    866 # This parameters allows the user to ask the model 
    867 #  to compute an irigation flux. This performed for the 
    868 #  on very simple hypothesis. The idea is to have a good 
    869 #  map of irrigated areas and a simple function which estimates 
    870 #  the need to irrigate. 
    871 DO_IRRIGATION = n 
    872 # default = n 
    873  
    874 # Name of file which contains the map of irrigated areas 
    875 # If IRRIGATE 
    876 # The name of the file to be opened to read the field 
    877 #  with the area in m^2 of the area irrigated within each 
    878 #  0.5 0.5 deg grid box. The map currently used is the one 
    879 #  developed by the Center for Environmental Systems Research  
    880 #  in Kassel (1995). 
    881 IRRIGATION_FILE = irrigated.nc 
    882 # default = irrigated.nc 
    883  
    884 # Should we include floodplains  
    885 # This parameters allows the user to ask the model 
    886 #  to take into account the flood plains and return  
    887 #  the water into the soil moisture. It then can go  
    888 #  back to the atmopshere. This tried to simulate  
    889 #  internal deltas of rivers. 
    890 DO_FLOODPLAINS = n 
    891 # default = n 
    892  
    893 # Use XIOS for writing diagnostics file 
    894 # defulat = n 
    895 XIOS_ORCHIDEE_OK = _AUTO_ 
    896 #************************************************************************** 
  • CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/run.def

    r2382 r2410  
    1111## Type de calendrier utilise 
    1212## valeur possible: earth_360d (defaut), earth_365d, earth_366d 
    13 calend= _AUTO_ 
     13calend= _AUTOBLOCKER_ 
    1414## Jour de l etat initial ( = 350  si 20 Decembre ,par expl. ,comme ici ) 
    15 dayref= _AUTO_ 
     15dayref= _AUTOBLOCKER_ 
    1616##  Annee de l etat  initial (   avec  4  chiffres   ) 
    17 anneeref= _AUTO_ 
     17anneeref= _AUTOBLOCKER_ 
    1818## Nombre de jours d integration 
    19 nday= _AUTO_ 
     19nday= _AUTOBLOCKER_ 
    2020## Remise a zero de la date initiale 
    21 raz_date= _AUTO_ 
     21raz_date= _AUTOBLOCKER_ 
    2222## periode de sortie des variables de controle (en pas) 
    2323iconser=240 
     
    2727ok_dynzon=n 
    2828## periode de stockage fichier dynzon (en jour) 
    29 periodav= _AUTO_ 
     29periodav= _AUTOBLOCKER_ 
    3030## activation du calcul d equilibrage de charge 
    3131adjust= _AUTO_ 
     
    3939### type_ocean = force / slab  /couple 
    4040### type_ocean is modified automatically by the lmdz.driver  
    41 type_ocean=_AUTO_ 
     41type_ocean=_AUTOBLOCKER_ 
    4242### version_ocean = nemo / opa8 
    4343version_ocean=nemo 
     
    4646### VEGET= y si ORCHIDEE, =n si bucket 
    4747### VEGET is modified automatically by the lmdz.driver  
    48 VEGET=_AUTO_ 
     48VEGET=_AUTOBLOCKER_ 
    4949### Choice of tracers type_trac=lmdz/inca/repr 
    5050### type_trac is set automatically by the lmdz.driver 
    51 type_trac=_AUTO_ 
     51type_trac=_AUTOBLOCKER_ 
    5252### config_inca=aero/chem needed only if type_trac=inca 
    53 config_inca=_AUTO_  
     53config_inca=_AUTOBLOCKER_  
    5454### Only concerning the program ce0l : for creating file grilles_gcm.nc 
    5555grilles_gcm_netcdf=_AUTO_ 
Note: See TracChangeset for help on using the changeset viewer.