Ignore:
Timestamp:
02/25/16 16:20:34 (6 years ago)
Author:
jgipsl
Message:

Update with modifications done on LMDZOR_v6:

  • pmagic changed to 0.0 in config.def_preind
  • clean amoung old physics
  • clean in drivers to remove everything related to IOIPSL
  • removed old parameters not longer supported by the new model source versions
  • general cleaning
Location:
CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS
Files:
16 edited

Legend:

Unmodified
Added
Removed
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/IPSLCM/piControl/COMP/lmdz.card

    r2749 r2758  
    7171List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \ 
    7272        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY},    gcm.def),          \ 
    73         (${SUBMIT_DIR}/PARAM/vert_L${RESOL_ATM_Z}.def,    vert.def),        \ 
     73        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \ 
    7474        (${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),          \ 
    7575        (${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),          \ 
     
    8181        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \ 
    8282        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \ 
    83         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \ 
    84         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\ 
    85         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\ 
    86         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \ 
    87         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\ 
    88         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\ 
    89         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \ 
    90         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \ 
    91         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \ 
    92         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \ 
    93         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \ 
    94         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . ) 
     83        (${SUBMIT_DIR}/PARAM/file_def_histmth_lmdz.xml, . ),                \ 
     84        (${SUBMIT_DIR}/PARAM/file_def_histmthCOSP_lmdz.xml, .),             \ 
     85        (${SUBMIT_DIR}/PARAM/file_def_histmthNMC_lmdz.xml, . ),             \ 
     86        (${SUBMIT_DIR}/PARAM/file_def_histday_lmdz.xml, . ),                \ 
     87        (${SUBMIT_DIR}/PARAM/file_def_histdayCOSP_lmdz.xml, .),             \ 
     88        (${SUBMIT_DIR}/PARAM/file_def_histdayNMC_lmdz.xml, . ),             \ 
     89        (${SUBMIT_DIR}/PARAM/file_def_histhf_lmdz.xml, . ),                 \ 
     90        (${SUBMIT_DIR}/PARAM/file_def_histhfCOSP_lmdz.xml, .),              \ 
     91        (${SUBMIT_DIR}/PARAM/file_def_histhfNMC_lmdz.xml, . ),              \ 
     92        (${SUBMIT_DIR}/PARAM/file_def_histstn_lmdz.xml, . ),                \ 
     93        (${SUBMIT_DIR}/PARAM/file_def_histins_lmdz.xml, . ),                \ 
     94        (${SUBMIT_DIR}/PARAM/file_def_histLES_lmdz.xml, . ) 
    9595 
    9696 
     
    101101 
    102102[OutputText] 
    103 List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml,debug.01,lmdz.prt,out_lmdz.x.err, out_lmdz.x.out) 
     103List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml,debug.01,lmdz.prt,out_lmdz.x.err, out_lmdz.x.out) 
    104104 
    105105[OutputFiles] 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/IPSLCM/piControl/COMP/orchidee.card

    r2726 r2758  
    1111 
    1212VEGET_UPDATE=0Y 
    13 LAND_COVER_CHANGE=n 
    14 sechiba_LEVEL=11 
    1513 
    1614[InitialStateFiles] 
    17 List= () 
    18  
    19 #(${R_IN}/SRF/soils_param.nc,        . ), \ 
    20 #      (${R_IN}/SRF/routing.nc,            . ), \ 
    21 #      (${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_2000.nc, PFTmap.nc), \ 
    22 #      (${R_IN}/SRF/cartepente2d_15min.nc, .) 
     15List=   (${R_IN}/SRF/soils_param.nc,        . ), \ 
     16        (${R_IN}/SRF/routing.nc,            . ), \ 
     17        (${R_IN}/SRF/albedo/alb_bg_jrctip.nc, . ), \ 
     18        (${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_2000.nc, PFTmap.nc), \ 
     19        (${R_IN}/SRF/cartepente2d_15min.nc, .) 
    2320 
    2421[BoundaryFiles] 
     
    3128[ParametersFiles] 
    3229List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
    33         (${SUBMIT_DIR}/PARAM/file_def_orchidee.xml, .)                  ,\ 
     30        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    3431        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    35         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\ 
    36         (${R_IN}/SRF/soils_param.nc,        . ), \ 
    37         (${R_IN}/SRF/routing.nc,            . ), \ 
    38         (${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_2000.nc, PFTmap.nc), \ 
    39         (${R_IN}/SRF/cartepente2d_15min.nc, .) 
     32        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    4033 
    4134[RestartFiles] 
     
    4740[OutputFiles] 
    4841List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \ 
    49         (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE),                    \ 
    50         (orchidee_watchout.nc, ${R_OUT_SRF_O_M}/${PREFIX}_1M_watchout.nc,        NONE) 
     42        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE) 
    5143 
    5244[Post_1M_sechiba_history] 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/IPSLCM/piControl/COMP/stomate.card

    r2674 r2758  
    99[BoundaryFiles] 
    1010List=   () 
    11 ListNonDel= (${R_IN}/SRF/reftemp.nc, .) 
     11ListNonDel= () 
    1212 
    1313[SmoothFiles] 
     
    3030[Post_1M_stomate_history] 
    3131Patches = () 
    32 GatherWithInternal = (lon, lat, PFT, time_counter, Areas, time_centered, time_centered_bounds) 
     32GatherWithInternal = (lon, lat, time_counter, Areas, time_centered, time_centered_bounds) 
    3333TimeSeriesVars2D = (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE) 
    3434ChunckJob2D = NONE 
     
    3939[Post_1M_stomate_ipcc_history] 
    4040Patches = () 
    41 GatherWithInternal = (lon, lat, PFT, time_counter, Areas, CONTFRAC, time_centered, time_centered_bounds) 
     41GatherWithInternal = (lon, lat, time_counter, Areas, CONTFRAC, time_centered, time_centered_bounds) 
    4242TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep) 
    4343ChunckJob2D = NONE 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/IPSLCM/piControl/config.card

    r2754 r2758  
    1414#----- DEVT TEST PROD 
    1515SpaceName=TEST 
    16 LongName="IPSLCM6.0.0" 
     16LongName="IPSLCM6.0.1" 
    1717TagName=IPSLCM6 
    1818#D- Choice of experiment in EXPERIMENTS directory 
     
    2828#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation 
    2929PeriodLength=1Y 
    30 #============================ 
    31 #-- Total Number of Processors (minimum is 2 for a coupled configuration) 
    32 JobNumProcTot=576 
    33 #============================ 
    34 # config.card configuration options : 
    35 #R_INIT=/u/rech/psl/rpsl035/IGCM/INIT 
    36 #R_INIT=/ccc/work/cont003/dsm/p86ipsl/IGCM/INIT 
    37 #R_BC=/u/rech/psl/rpsl035/IGCM/BC 
    38 #R_BC=/dmnfs/cont003/p86ipsl/IGCM/BC 
    39 #============================ 
    4030 
    4131#======================================================================== 
     
    154144RestartJobName= 
    155145RestartPath= 
    156 # Old component name for restart (if empty, use new name) 
    157 OldName= 
    158146 
    159147#======================================================================== 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r2585 r2758  
    55 
    66[UserChoices] 
     7# Physics package to use 
     8LMDZ_Physics=AP 
     9 
    710# Do not use XIOS with ce0l program 
    811XIOS=n 
    912 
    10 # manage radiative aerosol effect and ozone  
     13# Manage radiative aerosol effect and ozone  
    1114flag_aerosol=6 
    1215ok_ade=y 
     
    2023 
    2124[BoundaryFiles] 
    22 List=   (${R_IN}/ATM/AMIP/amipbc_sst_360x180_${year}.nc, amipbc_sst_1x1.nc), \ 
    23         (${R_IN}/ATM/AMIP/amipbc_sic_360x180_${year}.nc, amipbc_sic_1x1.nc), \ 
     25List=   (${R_IN}/ATM/AMIP_2014/amipbc_sst_360x180_${year}.nc, amipbc_sst_1x1.nc), \ 
     26        (${R_IN}/ATM/AMIP_2014/amipbc_sic_360x180_${year}.nc, amipbc_sic_1x1.nc), \ 
    2427        (${R_IN}/ATM/Ozone/HYBRIDE/v2.clim/tro3_${year}.new.nc, climoz.nc) 
    2528 
    26 ListNonDel= (${R_IN}/ATM/${config_UserChoices_TagName}/Albedo.nc, .), \ 
     29ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    2730        (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    2831        (${R_IN}/ATM/ECPHY.nc, .), \ 
     
    3033        (${R_IN}/ATM/Rugos.nc, .), \ 
    3134        (${R_IN}/ATM/landiceref.nc, .) 
    32 ### Please, add the o2a.nc file to fit with the coupled configuration associated 
    33 #       (${R_IN}/ATM/ORCA2.3x${RESOL_ATM}/o2a.nc, o2a.nc) 
     35 
     36### Optional: Add the o2a.nc file to fit with the coupled configuration for the  
     37### land-sea mask. This file is different for different versions of the coupled model and 
     38### the different resolutions. Choose between following to fit with IPSLCM6 coupled model: 
     39#       (${R_IN}/ATM/IPSLCM6/eORCA1.1xLMD144142/o2a.nc, o2a.nc) 
     40#       (${R_IN}/ATM/IPSLCM6/ORCA2.3x9695_v1/o2a.nc, o2a.nc) 
     41 
    3442 
    3543[ParametersFiles] 
    36 List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}_${LMDZ_Physics}, physiq.def), \ 
    37         (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),    \ 
    38         (${SUBMIT_DIR}/PARAM/output.def_low        ,  output.def),    \ 
     44List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def), \ 
     45        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY},    gcm.def),    \ 
     46        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),   \ 
    3947        (${SUBMIT_DIR}/PARAM/config.def_actuel     ,  config.def),    \ 
    4048        (${SUBMIT_DIR}/PARAM/run.def, .), \ 
     
    4654 
    4755[OutputText] 
    48 List=   (physiq.def, gcm.def, run.def, config.def, traceur.def, output.def) 
     56List=   (physiq.def, gcm.def, run.def, config.def, traceur.def, guide.def) 
    4957 
    5058[OutputFiles] 
     
    5462        ( startphy.nc,    ${R_OUT_ATM_O}/Restart/${config_UserChoices_JobName}_${year}_startphy.nc,     NONE), \ 
    5563        ( grilles_gcm.nc, ${R_OUT_ATM_O}/Grid/${config_UserChoices_JobName}_${year}_grilles_gcm.nc,     NONE) 
    56  
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZ/CREATE_amip/config.card

    r1804 r2758  
    99[UserChoices] 
    1010#============================ 
    11 #D-- (<8 chars MAX for JobName) 
    1211JobName=ELI-${RESOL_ATM_3D} 
    1312LongName="create_etat0_limit for interannuel amip run" 
     
    3736#D-- Executable - 
    3837[Executable] 
    39 #D- For each component, Real name of executable, Name of executable for oasis 
    40 ATM= (create_etat0_limit.e, create_etat0_limit.e) 
     38#D- For each component: Real name of executable, Name of executable in the run directory  
     39ATM= (create_etat0_limit.e, create_etat0_limit.e, 1MPI) 
    4140 
    4241#======================================================================== 
     
    6564RestartJobName= 
    6665RestartPath= 
    67 # Old component name for restart (if empty, use new name) 
    68 OldName= 
    69  
    7066 
    7167#======================================================================== 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZ/CREATE_clim/COMP/lmdz.card

    r2585 r2758  
    55 
    66[UserChoices] 
     7# Physics package to use 
     8LMDZ_Physics=AP 
     9 
    710# Do not use XIOS with ce0l program 
    811XIOS=n 
    912 
    10 # manage radiative aerosol effect and ozone  
     13# Manage radiative aerosol effect and ozone  
    1114flag_aerosol=6 
    1215ok_ade=y 
     
    2932        (${R_IN}/ATM/landiceref.nc, .) \ 
    3033        (${R_IN}/ATM/Ozone/HYBRIDE/v2.clim/tro3_1995.new.nc, climoz.nc), \ 
    31         (${R_IN}/ATM/AMIP/sst_bc_clim.nc, amipbc_sst_1x1.nc), \ 
    32         (${R_IN}/ATM/AMIP/sic_bc_clim.nc, amipbc_sic_1x1.nc) 
    33 ### Please, add the o2a.nc file to fit with the coupled configuration associated 
    34 #       (${R_IN}/ATM/ORCA2.3x${RESOL_ATM}/o2a.nc, o2a.nc) 
     34        (${R_IN}/ATM/AMIP_2014/sst_bc_clim.nc, amipbc_sst_1x1.nc), \ 
     35        (${R_IN}/ATM/AMIP_2014/sic_bc_clim.nc, amipbc_sic_1x1.nc) 
     36 
     37### Optional: Add the o2a.nc file to fit with the coupled configuration for the  
     38### land-sea mask. This file is different for different versions of the coupled model and 
     39### the different resolutions. Choose between following to fit with IPSLCM6 coupled model: 
     40#       (${R_IN}/ATM/IPSLCM6/eORCA1.1xLMD144142/o2a.nc, o2a.nc) 
     41#       (${R_IN}/ATM/IPSLCM6/ORCA2.3x9695_v1/o2a.nc, o2a.nc) 
     42 
    3543 
    3644[ParametersFiles] 
    37 List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}_${LMDZ_Physics}, physiq.def), \ 
    38         (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),    \ 
    39         (${SUBMIT_DIR}/PARAM/output.def_low        ,  output.def),    \ 
     45List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def), \ 
     46        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY},    gcm.def),    \ 
     47        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),   \ 
    4048        (${SUBMIT_DIR}/PARAM/config.def_actuel     ,  config.def),    \ 
    4149        (${SUBMIT_DIR}/PARAM/run.def, .), \ 
     
    4755 
    4856[OutputText] 
    49 List=   (physiq.def, gcm.def, run.def, config.def, traceur.def, output.def) 
     57List=   (physiq.def, gcm.def, run.def, config.def, traceur.def, guide.def) 
    5058 
    5159[OutputFiles] 
     
    5563        ( startphy.nc,    ${R_OUT_ATM_O}/Restart/${config_UserChoices_JobName}_clim_startphy.nc, NONE), \ 
    5664        ( grilles_gcm.nc, ${R_OUT_ATM_O}/Grid/${config_UserChoices_JobName}_grilles_gcm.nc,      NONE) 
     65 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZ/CREATE_clim/config.card

    r1772 r2758  
    99[UserChoices] 
    1010#============================ 
    11 #D-- (<8 chars MAX for JobName) 
    1211JobName= ELC-${RESOL_ATM_3D} 
    1312LongName="create_etat0_limit for climatology run" 
     
    2019#D-- Begin and end of job  
    2120#D-- "YYYY-MM-DD" 
     21#D-- The dates for this experiement has no significance. Do not change them. 
    2222DateBegin=1979-01-01 
    2323DateEnd=1979-12-30 
     
    3535#D-- Executable - 
    3636[Executable] 
    37 #D- For each component, Real name of executable, Name of executable for oasis 
    38 ATM= (create_etat0_limit.e, create_etat0_limit.e) 
     37#D- For each component: Real name of executable, Name of executable in the run directory  
     38ATM= (create_etat0_limit.e, create_etat0_limit.e, 1MPI) 
    3939 
    4040#======================================================================== 
     
    6363RestartJobName= 
    6464RestartPath= 
    65 # Old component name for restart (if empty, use new name) 
    66 OldName= 
    6765 
    6866 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card

    r2586 r2758  
    77# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later 
    88LMDZ_Physics=AP 
    9 #LMDZ_Physics=NPv4.12 
    109 
    1110# Use XIOS as output library 
     
    2019ConfType=annuel 
    2120 
    22 # manage radiative aerosol effect and ozone 
     21# Manage radiative aerosol effect and ozone 
    2322flag_aerosol=6 
    2423ok_ade=y 
     
    4140# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    4241 
    43 # Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used. 
     42# Set OutLevel to choose the level of output for LMDZ.  
    4443# OutLevel=low/medium/high 
    4544OutLevel=low 
    4645 
    47 # Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 
     46# COSP activation and choose of output frequency for COSP (monthly, daily, HF) = y/n 
    4847LMDZ_COSP_OK=n 
    4948LMDZ_COSP_monthly=n 
     
    5150LMDZ_COSP_hf=n 
    5251 
    53 # Set NMC Outputs frequency (monthly, daily, HF) = y/n 
     52# Set NMC output frequency (monthly, daily, HF) = y/n 
    5453LMDZ_NMC_monthly=y 
    5554LMDZ_NMC_daily=n 
     
    8180 
    8281[ParametersFiles] 
    83 List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}_${LMDZ_Physics}, physiq.def), \ 
    84         (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),          \ 
     82List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \ 
     83        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY},    gcm.def),          \ 
     84        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \ 
    8585        (${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),          \ 
    8686        (${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),          \ 
     
    9090        (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \ 
    9191        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \ 
     92        (${SUBMIT_DIR}/PARAM/file_def_histmth_lmdz.xml, . ),                \ 
     93        (${SUBMIT_DIR}/PARAM/file_def_histmthCOSP_lmdz.xml, .),             \ 
     94        (${SUBMIT_DIR}/PARAM/file_def_histmthNMC_lmdz.xml, . ),             \ 
     95        (${SUBMIT_DIR}/PARAM/file_def_histday_lmdz.xml, . ),                \ 
     96        (${SUBMIT_DIR}/PARAM/file_def_histdayCOSP_lmdz.xml, .),             \ 
     97        (${SUBMIT_DIR}/PARAM/file_def_histdayNMC_lmdz.xml, . ),             \ 
     98        (${SUBMIT_DIR}/PARAM/file_def_histhf_lmdz.xml, . ),                 \ 
     99        (${SUBMIT_DIR}/PARAM/file_def_histhfCOSP_lmdz.xml, .),              \ 
     100        (${SUBMIT_DIR}/PARAM/file_def_histhfNMC_lmdz.xml, . ),              \ 
     101        (${SUBMIT_DIR}/PARAM/file_def_histstn_lmdz.xml, . ),                \ 
     102        (${SUBMIT_DIR}/PARAM/file_def_histins_lmdz.xml, . ),                \ 
     103        (${SUBMIT_DIR}/PARAM/file_def_histLES_lmdz.xml, . ),                \ 
    92104        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \ 
    93         (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \ 
    94         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \ 
    95         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\ 
    96         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\ 
    97         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \ 
    98         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\ 
    99         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\ 
    100         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \ 
    101         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \ 
    102         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \ 
    103         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \ 
    104         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \ 
    105         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . ) 
     105        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ) 
    106106 
    107107[RestartFiles] 
     
    110110 
    111111[OutputText] 
    112 List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml,field_def_lmdz.xml,debug.01,lmdz.prt) 
     112List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt) 
    113113 
    114114[OutputFiles] 
     
    130130GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bounds, aire) 
    131131TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero) 
    132 ChunckJob2D = NONE 
     132ChunckJob2D = 100Y 
    133133TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd) 
    134134ChunckJob3D = 100Y 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/amip/COMP/orchidee.card

    r2585 r2758  
    1010 
    1111VEGET_UPDATE=1Y 
    12 LAND_COVER_CHANGE=y 
    1312 
    1413[InitialStateFiles] 
    1514List=   (${R_IN}/SRF/soils_param.nc,        . ), \ 
    1615        (${R_IN}/SRF/routing.nc,            . ), \ 
     16        (${R_IN}/SRF/albedo/alb_bg_jrctip.nc, . ), \ 
    1717        (${R_IN}/SRF/cartepente2d_15min.nc, .) 
    1818 
    1919[BoundaryFiles] 
    20 List=(${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_${year_p1}.nc, PFTmap.nc) 
     20List=(${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_${year}.nc, PFTmap.nc) 
    2121ListNonDel= () 
    2222 
     
    2626[ParametersFiles] 
    2727List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
     28        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    2829        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    29         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\ 
    30         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .) 
     30        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    3131 
    3232[RestartFiles] 
    33 # List restart that have to be saved/restored each loop (file out, saved, and in) : 
    3433List=   (sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc) 
    3534 
    3635[OutputText] 
    37 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml) 
     36List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc) 
    3837 
    3938[OutputFiles] 
     
    4544Patches = () 
    4645GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_counter_bounds) 
    47 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, bqsb, evap, fluxlat, fluxsens, gqsb, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac) 
     46TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR) 
    4847ChunckJob2D = NONE 
    4948TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) 
     
    5958ChunckJob3D = 10Y 
    6059Seasonal = OFF 
     60 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/amip/COMP/stomate.card

    r2585 r2758  
    99[BoundaryFiles] 
    1010List=   () 
    11 ListNonDel= (${R_IN}/SRF/reftemp.nc, .) 
     11ListNonDel= () 
    1212 
    1313[SmoothFiles] 
     
    1818 
    1919[RestartFiles] 
    20 # List restart that have to be saved/restored each loop (file out, saved, and in) : 
    2120List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc) 
    2221 
     
    3029[Post_1M_stomate_history] 
    3130Patches= () 
    32 GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bounds, Areas) 
     31GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas) 
    3332TimeSeriesVars2D= (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE) 
    3433ChunckJob2D = NONE 
    35 TimeSeriesVars3D = (CO2FLUX_MONTHLY,LAI,VEGET,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE) 
     34TimeSeriesVars3D = (CO2FLUX,LAI,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE) 
    3635ChunckJob3D = NONE 
    3736Seasonal=ON 
     
    3938[Post_1M_stomate_ipcc_history] 
    4039Patches= () 
    41 GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bounds, Areas, CONTFRAC) 
     40GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas, CONTFRAC) 
    4241TimeSeriesVars2D=(cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep) 
    4342ChunckJob2D = NONE 
     
    4544ChunckJob3D = NONE 
    4645Seasonal=ON 
     46 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/amip/config.card

    r2582 r2758  
    11# $Id$ 
    2 # This is config.card file for restart with an NEW libIGCM simulation tree. 
    3 # 
    42#======================================================================== 
    53#D-- Compatibility - 
     
    97[UserChoices] 
    108#============================ 
    11 #-- (<8 chars MAX for JobName) 
    129JobName=LMDZOR01 
    1310#----- Short Name of Experiment 
     
    2522#-- "YYYY-MM-DD" 
    2623DateBegin=1980-01-01 
    27 DateEnd=1980-01-31 
     24DateEnd=1980-12-31 
    2825#============================ 
    29 #-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation 
     26#-- 1Y, 1M, 5D, 1D Period Length for one execution 
    3027PeriodLength=1Y 
    31 #============================ 
    32 #-- Total Number of Processors 
    33 JobNumProcTot=32 
    3428 
    3529#======================================================================== 
     
    4539#D-- Executable - 
    4640[Executable] 
    47 #D- For each component, Real name of executable, Name of executable for oasis 
     41#D- For each component: Real name of executable, Name of executable in the run directory  
    4842ATM= (gcm.e, lmdz.x, 31MPI, 1OMP) 
    4943SRF= ("", "") 
     
    6963#D-- ATM - 
    7064[ATM] 
    71 # 
    7265WriteFrequency="1M" 
    7366# If config_Restarts_OverRule == 'n' next 4 params are read 
     
    7871RestartJobName=LMDZOR01 
    7972RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip 
    80 # Old component name for restart (if empty, use new name) 
    81 OldName= 
    8273 
    8374#======================================================================== 
     
    9283RestartJobName=EXP00 
    9384RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip 
    94 #-- Old component name for restart (if empty, use new name) 
    95 OldName= 
    9685 
    9786#======================================================================== 
     
    10695RestartJobName=EXP00 
    10796RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip 
    108 #-- Old component name for restart (if empty, use new name) 
    109 OldName= 
    11097 
    11198#======================================================================== 
     
    120107RestartJobName= 
    121108RestartPath= 
    122 # Old component name for restart (if empty, use new name) 
    123 OldName= 
    124109 
    125110#======================================================================== 
    126111#D-- Post - 
    127112[Post] 
    128 #D- Do we rebuild parallel output, this flag determines 
    129 #D- frequency of rebuild submission (use NONE for DRYRUN=3) 
    130 RebuildFrequency=1Y 
    131 #D- Do we pack restart and debug txt files, this flag determines 
    132 #D- frequency of pack submission (use NONE for DRYRUN=3) 
     113#D- RebuildFrequency determines the frequency of rebuild submission 
     114RebuildFrequency=NONE 
     115#D- PackFrequency determines the frequency of pack submission 
    133116PackFrequency=1Y 
    134 #D- If you want to produce time series, this flag determines 
    135 #D- frequency of post-processing submission (NONE if you don't want) 
     117#D- TimeSeriesFreqency determines the frequency of post-processing submission 
     118#D- Set NONE to deactivate the creation of all time series  
    136119TimeSeriesFrequency=10Y 
    137 #D- If you want to produce seasonal average, this flag determines 
    138 #D- the period of this average (NONE if you don't want) 
     120#D- SeasonalFrequency determines the length for each seasonal average 
     121#D- Set NONE to deactivate the creation of all seasonal avereage 
    139122SeasonalFrequency=10Y 
    140123#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/clim/COMP/lmdz.card

    r2586 r2758  
    77# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later 
    88LMDZ_Physics=AP 
    9 #LMDZ_Physics=NPv4.12 
    109 
    1110# Use XIOS as output library 
     
    2019ConfType=actuel 
    2120 
    22 # manage radiative aerosol effect and ozone 
     21# Manage radiative aerosol effect and ozone 
    2322flag_aerosol=6 
    2423ok_ade=y 
     
    4140# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    4241 
    43 # Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used. 
     42# Set OutLevel to choose the level of output for LMDZ.  
    4443# OutLevel=low/medium/high 
    4544OutLevel=low 
    4645 
    47 # Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 
     46# COSP activation and choose of output frequency for COSP (monthly, daily, HF) = y/n 
    4847LMDZ_COSP_OK=n 
    4948LMDZ_COSP_monthly=n 
     
    5150LMDZ_COSP_hf=n 
    5251 
    53 # Set NMC Outputs frequency (monthly, daily, HF) = y/n 
     52# Set NMC output frequency (monthly, daily, HF) = y/n 
    5453LMDZ_NMC_monthly=y 
    5554LMDZ_NMC_daily=n 
     
    6665[BoundaryFiles] 
    6766List=() 
    68  
    69 # With AR5 aerosols (including ASSO4M(=SO4), CSSO4M, AIBCM, ASBCM, AIPOMM, ASPOMM, ASSSM, CSSSM, SSSSM, CIDUSTM) 
    70 # With AR5 ozone(tropo + strato from LMDZOR-INCA-REPROBUS simulations) 
    7167ListNonDel= (${ARCHIVE}/IGCM_OUT/LMDZ/${CREATE}/ATM/Output/Boundary/${CREATE}_clim_limit.nc, limit.nc),\ 
    7268            (${ARCHIVE}/IGCM_OUT/LMDZ/${CREATE}/ATM/Output/Boundary/${CREATE}_climoz_LMDZ.nc, climoz_LMDZ.nc),\ 
     
    7874 
    7975[ParametersFiles] 
    80 List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}_${LMDZ_Physics}, physiq.def), \ 
    81         (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),          \ 
     76List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \ 
     77        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY},    gcm.def),          \ 
     78        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \ 
    8279        (${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),          \ 
    8380        (${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),          \ 
     
    8784        (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \ 
    8885        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \ 
     86        (${SUBMIT_DIR}/PARAM/file_def_histmth_lmdz.xml, . ),                \ 
     87        (${SUBMIT_DIR}/PARAM/file_def_histmthCOSP_lmdz.xml, .),             \ 
     88        (${SUBMIT_DIR}/PARAM/file_def_histmthNMC_lmdz.xml, . ),             \ 
     89        (${SUBMIT_DIR}/PARAM/file_def_histday_lmdz.xml, . ),                \ 
     90        (${SUBMIT_DIR}/PARAM/file_def_histdayCOSP_lmdz.xml, .),             \ 
     91        (${SUBMIT_DIR}/PARAM/file_def_histdayNMC_lmdz.xml, . ),             \ 
     92        (${SUBMIT_DIR}/PARAM/file_def_histhf_lmdz.xml, . ),                 \ 
     93        (${SUBMIT_DIR}/PARAM/file_def_histhfCOSP_lmdz.xml, .),              \ 
     94        (${SUBMIT_DIR}/PARAM/file_def_histhfNMC_lmdz.xml, . ),              \ 
     95        (${SUBMIT_DIR}/PARAM/file_def_histstn_lmdz.xml, . ),                \ 
     96        (${SUBMIT_DIR}/PARAM/file_def_histins_lmdz.xml, . ),                \ 
     97        (${SUBMIT_DIR}/PARAM/file_def_histLES_lmdz.xml, . ),                \ 
    8998        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \ 
    90         (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \ 
    91         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \ 
    92         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\ 
    93         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\ 
    94         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \ 
    95         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\ 
    96         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\ 
    97         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \ 
    98         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \ 
    99         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \ 
    100         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \ 
    101         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \ 
    102         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . ) 
     99        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ) 
    103100 
    104101[RestartFiles] 
     
    107104 
    108105[OutputText] 
    109 List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml,field_def_lmdz.xml,debug.01,lmdz.prt) 
     106List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt) 
    110107 
    111108[OutputFiles] 
     
    127124GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bounds, aire) 
    128125TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero) 
    129 ChunckJob2D = NONE 
     126ChunckJob2D = 100Y  
    130127TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd) 
    131128ChunckJob3D = 100Y 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/clim/COMP/orchidee.card

    r2585 r2758  
    1010 
    1111VEGET_UPDATE=0Y 
    12 LAND_COVER_CHANGE=n 
    1312 
    1413[InitialStateFiles] 
    15 List=   (${R_IN}/SRF/soils_param.nc,      . ), \ 
    16         (${R_IN}/SRF/routing.nc,          . ), \ 
     14List=   (${R_IN}/SRF/soils_param.nc,        . ), \ 
     15        (${R_IN}/SRF/routing.nc,            . ), \ 
     16        (${R_IN}/SRF/albedo/alb_bg_jrctip.nc, . ), \ 
    1717        (${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_2000.nc, PFTmap.nc), \ 
    1818        (${R_IN}/SRF/cartepente2d_15min.nc, .) 
     
    2727[ParametersFiles] 
    2828List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
     29        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    2930        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    30         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\ 
    31         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .) 
     31        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    3232 
    3333[RestartFiles] 
    34 # List restart that have to be saved/restored each loop (file out, saved, and in) : 
    3534List=   (sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc) 
    3635 
    3736[OutputText] 
    38 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml) 
     37List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc) 
    3938 
    4039[OutputFiles] 
     
    4645Patches = () 
    4746GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_counter_bounds) 
    48 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, bqsb, evap, fluxlat, fluxsens, gqsb, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac) 
     47TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR) 
    4948ChunckJob2D = NONE 
    5049TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) 
     
    6059ChunckJob3D = 10Y 
    6160Seasonal = OFF 
     61 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/clim/COMP/stomate.card

    r2585 r2758  
    99[BoundaryFiles] 
    1010List=   () 
    11 ListNonDel= (${R_IN}/SRF/reftemp.nc, .) 
     11ListNonDel= () 
    1212 
    1313[SmoothFiles] 
     
    1818 
    1919[RestartFiles] 
    20 # List restart that have to be saved/restored each loop (file out, saved, and in) : 
    2120List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc) 
    2221 
     
    3029[Post_1M_stomate_history] 
    3130Patches= () 
    32 GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bounds, Areas) 
     31GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas) 
    3332TimeSeriesVars2D= (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE) 
    3433ChunckJob2D = NONE 
    35 TimeSeriesVars3D = (CO2FLUX_MONTHLY,LAI,VEGET,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE) 
     34TimeSeriesVars3D = (CO2FLUX,LAI,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE) 
    3635ChunckJob3D = NONE 
    3736Seasonal=ON 
     
    3938[Post_1M_stomate_ipcc_history] 
    4039Patches= () 
    41 GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bounds, Areas, CONTFRAC) 
     40GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas, CONTFRAC) 
    4241TimeSeriesVars2D=(cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep) 
    4342ChunckJob2D = NONE 
     
    4544ChunckJob3D = NONE 
    4645Seasonal=ON 
     46 
  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/clim/config.card

    r2582 r2758  
    11# $Id$ 
    2 # This is config.card file for restart with an NEW libIGCM simulation tree. 
    3 # 
    42#======================================================================== 
    53#D-- Compatibility - 
     
    97[UserChoices] 
    108#============================ 
    11 #-- (<8 chars MAX for JobName) 
    129JobName=LMDZOR01 
    1310#----- Short Name of Experiment 
     
    2522#-- "YYYY-MM-DD" 
    2623DateBegin=1980-01-01 
    27 DateEnd=1980-01-30 
     24DateEnd=1980-12-30 
    2825#============================ 
    29 #-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation 
     26#-- 1Y, 1M, 5D, 1D Period Length for one execution 
    3027PeriodLength=1Y 
    31 #============================ 
    32 #-- Total Number of Processors 
    33 JobNumProcTot=32 
    3428 
    3529#======================================================================== 
     
    3731[ListOfComponents] 
    3832#D- For each component, Name of component, Tag of component 
    39 ATM= (lmdz, LMDZ4_AR5) 
    40 SRF= (orchidee, ORCHIDEE_1_9_5) 
    41 SBG= (stomate, ORCHIDEE_1_9_5) 
     33ATM= (lmdz, LMDZ) 
     34SRF= (orchidee, ORCHIDEE) 
     35SBG= (stomate, ORCHIDEE) 
    4236IOS= (xios, XIOS) 
    4337 
     
    4539#D-- Executable - 
    4640[Executable] 
    47 #D- For each component, Real name of executable, Name of executable for oasis 
     41#D- For each component: Real name of executable, Name of executable in the run directory  
    4842ATM= (gcm.e, lmdz.x, 31MPI, 1OMP) 
    4943SRF= ("", "") 
     
    6963#D-- ATM - 
    7064[ATM] 
    71 # 
    7265WriteFrequency="1M" 
    7366# If config_Restarts_OverRule == 'n' next 4 params are read 
     
    7871RestartJobName=LMDZOR01 
    7972RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip 
    80 # Old component name for restart (if empty, use new name) 
    81 OldName= 
    8273 
    8374#======================================================================== 
     
    9283RestartJobName=EXP00 
    9384RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip 
    94 #-- Old component name for restart (if empty, use new name) 
    95 OldName= 
    9685 
    9786#======================================================================== 
     
    10695RestartJobName=EXP00 
    10796RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip 
    108 #-- Old component name for restart (if empty, use new name) 
    109 OldName= 
    11097 
    11198#======================================================================== 
     
    120107RestartJobName= 
    121108RestartPath= 
    122 # Old component name for restart (if empty, use new name) 
    123 OldName= 
    124109 
    125110#======================================================================== 
    126111#D-- Post - 
    127112[Post] 
    128 #D- Do we rebuild parallel output, this flag determines 
    129 #D- frequency of rebuild submission (use NONE for DRYRUN=3) 
    130 RebuildFrequency=1Y 
    131 #D- Do we pack restart and debug txt files, this flag determines 
    132 #D- frequency of pack submission (use NONE for DRYRUN=3) 
     113#D- RebuildFrequency determines the frequency of rebuild submission 
     114RebuildFrequency=NONE 
     115#D- PackFrequency determines the frequency of pack submission 
    133116PackFrequency=1Y 
    134 #D- If you want to produce time series, this flag determines 
    135 #D- frequency of post-processing submission (NONE if you don't want) 
     117#D- TimeSeriesFreqency determines the frequency of post-processing submission 
     118#D- Set NONE to deactivate the creation of all time series  
    136119TimeSeriesFrequency=10Y 
    137 #D- If you want to produce seasonal average, this flag determines 
    138 #D- the period of this average (NONE if you don't want) 
     120#D- SeasonalFrequency determines the length for each seasonal average 
     121#D- Set NONE to deactivate the creation of all seasonal avereage 
    139122SeasonalFrequency=10Y 
    140123#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency 
Note: See TracChangeset for help on using the changeset viewer.