Ignore:
Timestamp:
03/23/18 15:31:39 (3 years ago)
Author:
acosce
Message:

Update IPSLESM to comply with v6 standard and add the AER experiment for the coupled model

Location:
CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip
Files:
4 edited

Legend:

Unmodified
Added
Removed
  • CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card

    r3460 r3687  
    1010# LMDZ_Physics=NPv6.0.7 for new physics to be used with LMDZ5/trunk revision 2720 or later 
    1111# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later 
    12 LMDZ_Physics=NPv6.0.13 
     12# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 
     13LMDZ_Physics=NPv6.0.15_T 
    1314 
    1415# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
     
    5556 
    5657[BoundaryFiles] 
    57 ## To be used for IPSLCM6.0.12 when ready 
    58 ##List=   (${R_IN}/ATM/AEROSOLS/CMIP6/v0/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca_.nc,              aerosols${year}.nc),\ 
     58# With CMIP6 aerosols version 1 
    5959List=   (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\ 
    60         (${R_IN}/ATM/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_${year}_v5.nc,              aerosols${year}.nc),\ 
    61         (${R_IN}/ATM/OZONE/UReading_2016/3D_14Fields/${RESOL_ATM_3D}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
     60        (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc,              aerosols${year}.nc),\ 
     61        (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
    6262        (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\ 
    6363        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\ 
     
    7171            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\ 
    7272            (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt),\ 
    73             (${R_IN}/ATM/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_1855_v5.nc, aerosols.nat.nc) 
    74 #           (${R_IN}/ATM/AEROSOLS/CMIP6/v0/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/forcagelmdz_picontrol.nc,    aerosols.nat.nc) 
    75 # To be used for IPSLCM6.0.12 when ready 
     73            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc) 
    7674 
    7775[SmoothFiles] 
  • CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/COMP/orchidee.card

    r3459 r3687  
    1111VEGET_UPDATE=1Y 
    1212 
     13 
     14# Specify output level for output files 
     15# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here. 
     16# output_level_filename=0     : lowest level writing only variables needed for the monitoring 
     17# output_level_filename=12    : highest level which will output all variables 
     18# output_level_filename=NONE  : deactivate the file 
     19output_level_sechiba_history = 11 
     20output_level_sechiba_out_2 = NONE 
     21output_level_sechiba_history_4dim = 11 
     22 
     23# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts] 
     24# Settings using WriteFrequency in config.card is not longer used 
     25output_freq_sechiba_history = 1mo 
     26output_freq_sechiba_out_2 = 10800s 
     27output_freq_sechiba_history_4dim = 1mo 
     28 
     29 
    1330[InitialStateFiles] 
    1431List=   (${R_IN}/SRF/soils_param.nc, . ), \ 
     
    1936 
    2037[BoundaryFiles] 
    21 List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2/historical/v1.2/withoutNoBio_15PFT/PFTmap_${year}.nc, PFTmap.nc) ,\ 
     38List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_${year}.nc, PFTmap.nc) ,\ 
    2239      (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_${year}.nc, woodharvest.nc) 
    2340ListNonDel= () 
     
    2845[ParametersFiles] 
    2946List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
    30         (${SUBMIT_DIR}/PARAM/file_def_orchidee.xml, .)  ,\ 
     47        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    3148        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
    3249        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
  • CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/COMP/stomate.card

    r3436 r3687  
    33 
    44[UserChoices] 
     5 
     6# Specify output level for output files 
     7# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here. 
     8# output_level_filname=0     : lowest level writing only variables needed for the monitoring 
     9# output_level_filname=1     : highest level which will output all variables 
     10# output_level_filname=NONE  : deactivate the file 
     11output_level_stomate_history = 1 
     12output_level_stomate_ipcc_history = 1 
     13 
     14# Specify output frequency for each file [1y, 1mo, 1d] 
     15# Settings using WriteFrequency in config.card are not longer used 
     16output_freq_stomate_history = 1mo 
     17output_freq_stomate_ipcc_history = 1mo 
     18 
    519 
    620[InitialStateFiles] 
     
    3246TimeSeriesVars2D = (T2M_MONTH,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE) 
    3347ChunckJob2D = NONE 
    34 TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN) 
     48TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT) 
    3549ChunckJob3D = NONE 
    3650Seasonal = ON 
     
    3953Patches = () 
    4054GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds) 
    41 TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep) 
     55TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest) 
    4256ChunckJob2D = NONE 
    4357TimeSeriesVars3D = () 
  • CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/config.card

    r3448 r3687  
    7878#D-- SRF - 
    7979[SRF] 
    80 WriteFrequency="1M" 
     80# WriteFrequency is not used any more for ORCHIDEE  
     81# Output files are now managed in orchidee.card  
     82WriteFrequency="" 
    8183# If config_Restarts_OverRule == 'n' next 4 params are read 
    8284Restart= n 
     
    9193#D-- SBG - STOMATE 
    9294[SBG] 
    93 WriteFrequency="1M" 
     95# WriteFrequency is not used any more for ORCHIDEE  
     96# Output files are now managed in stomate.card  
     97WriteFrequency="" 
    9498# If config_Restarts_OverRule == 'n' next 4 params are read 
    9599Restart= n 
Note: See TracChangeset for help on using the changeset viewer.