Changeset 6333


Ignore:
Timestamp:
02/27/23 12:39:01 (7 months ago)
Author:
jgipsl
Message:

Correct path to input files (folder INPUT_CE0L was missing in the path).

Location:
CONFIG/UNIFORM/v6
Files:
18 edited

Legend:

Unmodified
Added
Removed

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r6310 r6333  
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_p1}.nc, climoz_p.nc) 
    3535 
    36 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    37         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    38         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    39         (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
    40         (${R_IN}/ATM/Rugos.nc, .), \ 
    41         (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc), \ 
     36ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     37        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     38        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     39        (${R_IN}/ATM/INPUT_CE0L/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
     40        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     41        (${R_IN}/ATM/INPUT_CE0L/landiceref_GA_HR.new.nc, landiceref.nc), \ 
    4242        (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc) 
    4343 
    4444# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version: 
    45 #       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    46 #       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     45#       (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     46#       (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    4747# 
    4848# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask. 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

    r6310 r6333  
    2626List= () 
    2727 
    28 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    29         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    30         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    31         (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
    32         (${R_IN}/ATM/Rugos.nc, .), \ 
    33         (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \ 
     28ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     29        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     30        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     31        (${R_IN}/ATM/INPUT_CE0L/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
     32        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     33        (${R_IN}/ATM/INPUT_CE0L/landiceref_GA_HR.new.nc, landiceref.nc) \ 
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \ 
    3535        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \ 
    … …  
    3838 
    3939# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version: 
    40 #       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    41 #       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     40#       (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     41#       (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    4242# 
    4343# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask. 

  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r6311 r6333  
    3535 
    3636ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    37         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    38         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    39         (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    40         (${R_IN}/ATM/Rugos.nc, .), \ 
    41         (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc), \ 
     37        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     38        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     39        (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     40        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     41        (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc), \ 
    4242        (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc) 
    4343 

  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

    r6311 r6333  
    2626List= () 
    2727 
    28 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    29         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    30         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    31         (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    32         (${R_IN}/ATM/Rugos.nc, .), \ 
    33         (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     28ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     29        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     30        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     31        (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     32        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     33        (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \ 
    3535        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \ 

  • CONFIG/UNIFORM/v6/IPSLCM6_LANDN/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r6311 r6333  
    3535 
    3636ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    37         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    38         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    39         (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    40         (${R_IN}/ATM/Rugos.nc, .), \ 
    41         (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc), \ 
     37        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     38        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     39        (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     40        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     41        (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc), \ 
    4242        (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc) 
    4343 

  • CONFIG/UNIFORM/v6/IPSLCM6_LANDN/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

    r6311 r6333  
    2626List= () 
    2727 
    28 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    29         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    30         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    31         (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    32         (${R_IN}/ATM/Rugos.nc, .), \ 
    33         (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     28ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     29        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     30        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     31        (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     32        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     33        (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \ 
    3535        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \ 

  • CONFIG/UNIFORM/v6/LMDZORINCA_v6.1.10/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r6311 r6333  
    3535 
    3636ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    37         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    38         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    39         (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    40         (${R_IN}/ATM/Rugos.nc, .), \ 
    41         (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc), \ 
     37        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     38        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     39        (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     40        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     41        (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc), \ 
    4242        (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc) 
    4343 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.2/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r6310 r6333  
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_p1}.nc, climoz_p.nc) 
    3535 
    36 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    37         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    38         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    39         (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
    40         (${R_IN}/ATM/Rugos.nc, .), \ 
    41         (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc), \ 
     36ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     37        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     38        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     39        (${R_IN}/ATM/INPUT_CE0L/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
     40        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     41        (${R_IN}/ATM/INPUT_CE0L/landiceref_GA_HR.new.nc, landiceref.nc), \ 
    4242        (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc) 
    4343 
    4444# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version: 
    45 #       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    46 #       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     45#       (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     46#       (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    4747# 
    4848# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask. 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.2/EXPERIMENTS/LMDZ/CREATE_clim/COMP/lmdz.card

    r6310 r6333  
    2626List= () 
    2727 
    28 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    29         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    30         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    31         (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
    32         (${R_IN}/ATM/Rugos.nc, .), \ 
    33         (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \ 
     28ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     29        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     30        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     31        (${R_IN}/ATM/INPUT_CE0L/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
     32        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     33        (${R_IN}/ATM/INPUT_CE0L/landiceref_GA_HR.new.nc, landiceref.nc) \ 
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \ 
    3535        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \ 
    … …  
    3838 
    3939# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version: 
    40 #       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    41 #       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     40#       (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     41#       (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    4242# 
    4343# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask. 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.2/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

    r6310 r6333  
    2626List= () 
    2727 
    28 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    29         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    30         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    31         (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
    32         (${R_IN}/ATM/Rugos.nc, .), \ 
    33         (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \ 
     28ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     29        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     30        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     31        (${R_IN}/ATM/INPUT_CE0L/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
     32        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     33        (${R_IN}/ATM/INPUT_CE0L/landiceref_GA_HR.new.nc, landiceref.nc) \ 
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \ 
    3535        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \ 
    … …  
    3838 
    3939# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version: 
    40 #       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    41 #       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     40#       (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     41#       (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    4242# 
    4343# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask. 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r6310 r6333  
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_p1}.nc, climoz_p.nc) 
    3535 
    36 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    37         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    38         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    39         (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
    40         (${R_IN}/ATM/Rugos.nc, .), \ 
    41         (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc), \ 
     36ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     37        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     38        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     39        (${R_IN}/ATM/INPUT_CE0L/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
     40        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     41        (${R_IN}/ATM/INPUT_CE0L/landiceref_GA_HR.new.nc, landiceref.nc), \ 
    4242        (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc) 
    4343 
    4444# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version: 
    45 #       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    46 #       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     45#       (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     46#       (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    4747# 
    4848# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask. 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

    r6310 r6333  
    2626List= () 
    2727 
    28 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    29         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    30         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    31         (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
    32         (${R_IN}/ATM/Rugos.nc, .), \ 
    33         (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \ 
     28ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     29        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     30        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     31        (${R_IN}/ATM/INPUT_CE0L/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
     32        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     33        (${R_IN}/ATM/INPUT_CE0L/landiceref_GA_HR.new.nc, landiceref.nc) \ 
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \ 
    3535        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \ 
    … …  
    3838 
    3939# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version: 
    40 #       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    41 #       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     40#       (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     41#       (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    4242# 
    4343# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask. 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZ/clim_360d/COMP/lmdz.card

    r6137 r6333  
    9595        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \ 
    9696        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \ 
     97        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),         \ 
    9798        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \ 
    9899        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\ 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.4/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r6310 r6333  
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_p1}.nc, climoz_p.nc) 
    3535 
    36 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    37         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    38         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    39         (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
    40         (${R_IN}/ATM/Rugos.nc, .), \ 
    41         (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc), \ 
     36ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     37        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     38        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     39        (${R_IN}/ATM/INPUT_CE0L/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
     40        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     41        (${R_IN}/ATM/INPUT_CE0L/landiceref_GA_HR.new.nc, landiceref.nc), \ 
    4242        (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc) 
    4343 
    4444# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version: 
    45 #       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    46 #       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     45#       (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     46#       (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    4747# 
    4848# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask. 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.4/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

    r6310 r6333  
    2626List= () 
    2727 
    28 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    29         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    30         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    31         (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
    32         (${R_IN}/ATM/Rugos.nc, .), \ 
    33         (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \ 
     28ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     29        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     30        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     31        (${R_IN}/ATM/INPUT_CE0L/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \ 
     32        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     33        (${R_IN}/ATM/INPUT_CE0L/landiceref_GA_HR.new.nc, landiceref.nc) \ 
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \ 
    3535        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \ 
    … …  
    3838 
    3939# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version: 
    40 #       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    41 #       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     40#       (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     41#       (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    4242# 
    4343# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask. 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.4/EXPERIMENTS/LMDZ/clim_360d/COMP/lmdz.card

    r6069 r6333  
    9595        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \ 
    9696        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \ 
     97        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),         \ 
    9798        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \ 
    9899        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\ 
    … …  
    120121List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \ 
    121122        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \ 
    122         (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    Post_1M_histmthNMC),    \ 
     123        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    NONE),                  \ 
    123124        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \ 
    124125        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \ 

  • CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r6311 r6333  
    3535 
    3636ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    37         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    38         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    39         (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    40         (${R_IN}/ATM/Rugos.nc, .), \ 
    41         (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc), \ 
     37        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     38        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     39        (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     40        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     41        (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc), \ 
    4242        (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc) 
    4343 

  • CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

    r6311 r6333  
    2626List= () 
    2727 
    28 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
    29         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \ 
    30         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \ 
    31         (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \ 
    32         (${R_IN}/ATM/Rugos.nc, .), \ 
    33         (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \ 
     28ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo.nc, .), \ 
     29        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECDYN.nc), \ 
     30        (${R_IN}/ATM/INPUT_CE0L/ECDYN.nc.20020101, ECPHY.nc), \ 
     31        (${R_IN}/ATM/INPUT_CE0L/Relief_orig.nc, Relief.nc), \ 
     32        (${R_IN}/ATM/INPUT_CE0L/Rugos.nc, .), \ 
     33        (${R_IN}/ATM/INPUT_CE0L/landiceref_orig.nc, landiceref.nc) \ 
    3434        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \ 
    3535        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \ 
Note: See TracChangeset for help on using the changeset viewer.