source: CONFIG/UNIFORM/v6/LMDZOR_v6

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @2958   5 years jgipsl Added transpir as time-series. It is needed for the monitoring.
(edit) @2957   5 years jgipsl Removed CONTFRAC as time-serie and add it in GatherWithInternal?. …
(edit) @2955   5 years jgipsl - Removed CO2FLUX from TS : this variable is not written anymore by …
(edit) @2952   5 years jgipsl Correction on monitoring of vegetation fractions
(edit) @2951   5 years jgipsl Change comment to correct path to o2a.nc file
(edit) @2947   5 years jgipsl Homogenization of .cards, mainly for time-series
(edit) @2946   5 years jgipsl Activate ROUGH_DYN=y (Su parametrization) as already done in IPSLCM6
(edit) @2938   5 years jgipsl Change name from CREATE_clim to CREATE_clim_360d
(edit) @2937   5 years jgipsl Change name for experience clim into clim_360d.
(edit) @2936   5 years jgipsl Change name for experience clim into clim_360d to make it obvious which …
(edit) @2934   5 years jgipsl Update time-series and monitoring for orchidee (only sechiba) component
(edit) @2932   5 years jgipsl - Added TS variables for orchidee (water budget) - Added frac_snow as TS - …
(edit) @2929   5 years jgipsl Added new physiq version for LMDZ. To be used with LMDZ/testing 2595
(edit) @2928   5 years jgipsl Update configuration LMDZOR_v6 to be used with LMDZ/testing 2595 and …
(edit) @2919   5 years jgipsl Add comment
(edit) @2915   5 years lfairhead Updating the LMDZ/XIOS files to testing version 2542 LF
(edit) @2914   5 years lfairhead Missing some default parameters from the convection.def file inclusion Of …
(edit) @2911   5 years jgipsl pmagic can now be set in lmdz.card. The default value (always 0.0) is used …
(edit) @2910   5 years jgipsl - Removed ok_strato and ok_hines from physiq.def. These flags are set in …
(edit) @2909   5 years jgipsl - For creation of interannual limit.nc files, CREATE_amip, ce0l now …
(edit) @2907   5 years jgipsl Set default value for stomate output frequency even if the files are …
(edit) @2904   5 years jgipsl Removed option to switch of XIOS for LMDZ. Note the option was not working …
(edit) @2901   5 years jgipsl Always have nbapp_rad=16 in couled and forced run. Frederic Hourdin
(edit) @2900   5 years jgipsl Better comments and reordering.
(edit) @2896   5 years jgipsl Put back pmagic=0.0 as before commit [2893]. Only IPSLCM6 pdControl …
(edit) @2893   5 years jgipsl Updated LMDZOR_v6 as done for IPSLCM6.0.4 from revision [2876] uptil …
(edit) @2866   6 years jgipsl Added compilation of rrtm needed for NPv5.5 phyisics with LMDZ.
(edit) @2862   6 years jgipsl Add -cpp XIOS1 in the compilation of LMDZ. This is done to force newer …
(edit) @2859   6 years jgipsl Removed specific treatment of Bands_ file and option adjust in lmdz. See …
(edit) @2856   6 years jgipsl Correction of name of new output file out_"execname".
(edit) @2853   6 years lfairhead Follow-up to convection.def file cleanup LF
(edit) @2847   6 years lfairhead Parameters that were in convection.def file are now in physiq.def file No …
(edit) @2841   6 years jgipsl Ticket #92 Correction on option lmdz_UserChoices_CARBON_CYCLE. Note this …
(edit) @2840   6 years acosce Change name to log output for create_etat0_limit in LMDZOR and in …
(edit) @2838   6 years jgipsl Correction : ok_hines and ok_strato are set in vert.def
(edit) @2833   6 years aclsce - Added config.card LongName? as global attribute of output files of v6 …
(edit) @2817   6 years acosce Add new output file for xios in xios.card
(edit) @2812   6 years acosce Add the save of out_gcm.e.err and out_gcm.e.out in [OutputText?] part of …
(edit) @2804   6 years acosce update path for o2a file, the previous path doesn't exist anymore
(edit) @2801   6 years lfairhead Added *def files for LMDZ NPv5.5 LF
(edit) @2784   6 years aclsce - Added "prw_global" as variable monitored in order to replace old …
(edit) @2771   6 years jgipsl Updated comment
(edit) @2769   6 years jgipsl Added parameters for chemistry BVOC as done in LMDZORINCA_v6.
(edit) @2767   6 years jgipsl The vertical parameters were previously extracted from gcm.def files and …
(edit) @2759   6 years jgipsl Some more cleaning and comments.
(edit) @2757   6 years jgipsl Some update in LMDZOR_v6 configuration: the parameters LAND_USE and …
(edit) @2755   6 years jgipsl - Corrected error in value for tetagrot in gcm.def_144x142 - Removed …
(edit) @2743   6 years jgipsl Take file_def_orchidee.xml from ORCHIDEE/src_xml source directory.
(edit) @2742   6 years jgipsl Updated file_def_xxxxx_lmdz.xml to be compatible with LMDZ/trunk from …
(edit) @2741   6 years jgipsl Removed the variable for PFT describing the axis from GatherWithInternal?. …
(edit) @2736   6 years jgipsl Change in parameter files for LMDZ: * created vert.def containing …
(edit) @2734   6 years jgipsl Added input files needed for option ALB_BG_MODIS=y added in previsou …
(edit) @2733   6 years jgipsl Added ALB_BG_MODIS new parameter. Removed HYDROL_SOIL_DEPTH and …
(edit) @2732   6 years jgipsl Corrected error in commit [2729]
(edit) @2729   6 years jgipsl * L79_NPv5.17g, L79_NPv5.17h : strongly dependent on the LMDZ source …
(edit) @2725   6 years jgipsl Changed day_step as done in IPSLCM6 already in changeset [2674]
(edit) @2702   6 years jgipsl Change cp into mv of the executable: To be sure to always recreate the …
(edit) @2698   6 years jgipsl Copied NPv5.17h from IPSLCM6 to LMDZOR_v6
(edit) @2693   6 years jgipsl Corrected path to o2a.nc file in comment
(edit) @2658   6 years jgipsl Deactivate rebuild job: Not needed because always use xios in server mode …
(edit) @2649   6 years jgipsl - Added Chuck for histmth ts. - Added choice of LMDZ_physics in CREATE_ …
(edit) @2644   6 years jgipsl Add LMDZ/clim experiment(same as LMDZOR/clim but without ORCHIDEE)
(edit) @2640   6 years jgipsl Removed variable Sinang: this variable changed name in ORCHIDEE trunk rev …
(edit) @2635   6 years jgipsl Remove the field duhin and dvhin from file_def for LMDZ. This is done to …
(edit) @2630   6 years jgipsl Removed parameter grilles_gcm_netcdf not longer existing in LMDZ. …
(edit) @2627   6 years lfairhead Inclusion of more up-to-date physical parameters for LMDZ
(edit) @2618   6 years jgipsl Update version of AMIP files. Now using AMIP_2014. Before AMIP was linking …
(edit) @2615   6 years jgipsl Add comment to know origine of the files (testing LMDZ rev 2314).
(edit) @2606   6 years jgipsl Removed modifications from xios.driver and set correct behaviour in …
(edit) @2605   6 years jgipsl - Put back NMC monthly output as default for LMDZOR experiments - More …
(edit) @2604   6 years jgipsl Clean in .card. Removed OldName? not used anymore in config.card. Removed …
(edit) @2603   6 years jgipsl Correction in file path.
(edit) @2602   6 years jgipsl * orchidee.def : Deactivate FIRE in ORCHIDEE (FIRE_DISABLE=y). Add …
(edit) @2601   6 years jgipsl - Corrected error introduced in rev 2995. - Deactivate NMC as default - …
(edit) @2600   6 years jgipsl Changed to use option "IGCM_comp_modifyXmlFile nonblocker ..." for LMDZ …
(edit) @2599   6 years jgipsl Correct syntax error
(edit) @2598   6 years jgipsl Adapted LMDZOR_v6 to be used with LMDZ5 testing 2314 lmdz.driver : …
(edit) @2595   6 years jgipsl Modifications to be used with ORCHIDEE trunk rev 2724 or later. * Remove …
(edit) @2587   6 years jgipsl Clean in gcm.def_144x142x79 : remove idissip (obsolete), remove …
(edit) @2586   6 years jgipsl Correction : these files are not available in the specific revision of …
(edit) @2585   6 years jgipsl Simplified path to input files in IGCM shared acount after reorganization. …
(edit) @2584   6 years jgipsl Bug correction amip experience: with PeriodLenght?=1Y no smoothfiles should …
(edit) @2582   6 years jgipsl Update with changes done on v6_rc0 (sdipsl) : - remove IOIPSL - clean …
(edit) @2528   7 years lfairhead A zoom focus not centered on longitude 0. leads to a shifted grid for LMDZ
(edit) @2516   7 years jgipsl Enhancement in the clean option: - add clean for XIOS - now remove the …
(edit) @2514   7 years jgipsl Now have 6 tracers: * H2Ov, H2Ol: mandatory * H2Oi: is needed for the …
(edit) @2512   7 years jgipsl
(edit) @2508   7 years jgipsl For all new physics in LMDZ except NPv3, take default value set in …
(edit) @2507   7 years jgipsl Remove parameter files for 19 levels in the atmosphere. These grid are not …
(edit) @2506   7 years jgipsl Changed back default options: - set old physics in LMDZ: New physics NPv5 …
(edit) @2505   7 years jgipsl - Remove config.def_L19 in all v6 configurations. - Change to pmagic=0.0 …
(edit) @2503   7 years sdipsl homogenize post processing options within v6 configurations. …
(edit) @2502   7 years sdipsl - amip experiment in coherence with clim experiment - and fix issue in …
(edit) @2500   7 years sdipsl LMDZOR_v6 gets closer to LMDZ latest new physics. Turn on CWRR in orchidee …
(edit) @2499   7 years sdipsl add xios target for L59 and L79
(edit) @2480   7 years jgipsl Correction for experiments with ce0l. In lmdz.driver : use_filtre_fft is …
(edit) @2479   7 years jgipsl Added experiment for create_etat0_limit: to create initiale state files …
(edit) @2476   7 years jgipsl LMDZ parameter ok_all_xml in run.def becomes AUTO. This variable must be …
(edit) @2475   7 years jgipsl Add directory
(edit) @2474   7 years jgipsl Changed compilation of ce0l in LMDZ from use of dyn3dpar to dyn3d: When …
Note: See TracRevisionLog for help on using the revision log.