source: CONFIG/UNIFORM/v6/LMDZOR_v6

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @3436   4 years jgipsl Output variable veget_max from Orchidee changed name into veget_cov_max …
(edit) @3433   4 years jgipsl Correction in file name as done in IPSLCM6 config.
(edit) @3430   4 years jgipsl Set parameter for text output level for ORCHIDEE, PRINTLEV=1.
(edit) @3429   4 years jgipsl Update to use v3.1corr version of solarforcing files, as done in IPSLCM6.
(edit) @3426   4 years jgipsl Add NVM and PFT_TO_MTC to be abel to run Choisnel hydrology with the new …
(edit) @3425   4 years jgipsl Update monitoring as done in IPSLCM6 [3420]
(edit) @3422   4 years jgipsl Corrected error in path for woodharvest file.
(edit) @3418   4 years jgipsl Update ORCHIDEE component for version 6.0.13: - change input file for …
(edit) @3417   4 years jgipsl Update LMDZOR_v6 as done in IPSLCM6 for stratospheric aerosol version 3 …
(edit) @3406   4 years tlurton Changed QBO diag to 5000 hPa and -5deg/+5deg average.
(edit) @3400   4 years jgipsl Set a default value for solaire parameter to make it easier to run a …
(edit) @3379   4 years jgipsl As done in previous commit now also for LMDZOR_v6 : Preparing for …
(edit) @3376   4 years jgipsl Update LMDZOR_v6 for LMDZ version 6.0.12 as done in IPSLCM6.
(edit) @3367   4 years jgipsl As done in IPSLCM6.0.12: Modified cld* parameters in physiq.def NPv6.0.12
(edit) @3362   4 years jgipsl Update LMDZOR_v6 configuration following IPSLCM6.0.12 : * take new …
(edit) @3340   4 years jgipsl Remove resolution 44x43x19 : this resolution can not compile because LMDZ …
(edit) @3323   4 years jgipsl Update physiq.def_NPv6.0.11 as done in IPSLCM6 revision [3310], [3311] and …
(edit) @3301   4 years jgipsl Add new physiques for IPSLCM6.0.11 as done in IPSLCM6
(edit) @3291   4 years jgipsl Update version of limit.nc and start/startphy files : now use the same as …
(edit) @3289   4 years jgipsl Adapt CREATE_clim and CREATE_amip * Now use new amip files from …
(edit) @3288   4 years jgipsl Updated ORCHIDEE component for IPSLCM6.0.11. To be used with ORCHIDEE …
(edit) @3287   4 years jgipsl Add variable in monitoring and remove variable ts absvisaer as done in …
(edit) @3255   4 years jgipsl Update
(edit) @3248   4 years jgipsl Parameter was set twice.
(edit) @3247   4 years jgipsl Added physiq NPv6.0.10 and use as default, as done in IPSLCM6.
(edit) @3222   4 years jgipsl - Deactivate Metrics calculation in all experiments. - Set …
(edit) @3205   4 years jgipsl Output file for ORCHIDEE changed name. To be used with ORHCIDEE/trunk …
(edit) @3201   4 years jgipsl Add new output file sechiba_history_4D.nc for ORCHIDEE. This file contains …
(edit) @3200   4 years jgipsl orchidee.driver : add modification for new file sechiba3 in ORCHIDEE. This …
(edit) @3197   4 years jgipsl Activate soil resistance in ORCHIDEE (option DO_RSOIL) for IPSLCM6.0.10 …
(edit) @3195   4 years jgipsl Change some TS in LMDZOR experiements as done in IPSLCM6 rev [3121] and …
(edit) @3170   4 years jgipsl Replaced path IGCM/ATM/IPSLCM6 by IGCM/ATM/START due to changes in IGCM …
(edit) @3169   4 years jgipsl Updated version of LMDZ_Physics as done in IPSLCM6 Removed duplicated …
(edit) @3155   4 years jgipsl Added new parameter files as done in IPSLCM6
(edit) @3141   4 years jgipsl Removed new option for soil resistance from ORCHIDEE parameter file.
(edit) @3139   4 years jgipsl update readme
(edit) @3138   4 years jgipsl As done in IPSLCM6: use more 71 MPI (2 latitude bands/1MPI) and update …
(edit) @3133   4 years jgipsl Add from IPSLCM6
(edit) @3132   4 years jgipsl Update to use LMDZ_Physics=NPv6.0.8 in all LMDZ and LMDZOR experiments as …
(edit) @3131   4 years jgipsl Update as done in IPSLCM6
(edit) @3128   4 years jgipsl Changes as done in IPSLCM6 rev [3121] : - change in time serie variables …
(edit) @3127   4 years jgipsl - Added comments in Script_Output for the parameter solaire which is …
(edit) @3122   4 years jgipsl Let ins_make add compile argument only at ciclad/climserv for compilation …
(edit) @3113   4 years jgipsl Change in comment
(edit) @3112   4 years jgipsl Add line in comment for compiling at ciclad
(edit) @3111   4 years jgipsl Changed version of new PFTmap files, from v1 to v1.2. The only …
(edit) @3104   4 years jgipsl Add copy of file_def_histstrataer_lmdz.xml from LMDZ sources. This file is …
(edit) @3095   4 years jgipsl remove space in the end of the line
(edit) @3094   4 years jgipsl Missing continuation of the line.
(edit) @3093   4 years jgipsl Modified set up of orchidee to fit with IPSLCM6.0.8. To benefit from all …
(edit) @3092   4 years jgipsl Add scalar forcing as done in IPSLCM6.
(edit) @3084   4 years jgipsl * Changed version of limit.nc files due to a bug on the sea ice fraction …
(edit) @3079   4 years jgipsl Removed paramLMDZ_phy.nc file. The corresponding variables are now in …
(edit) @3075   5 years jgipsl Update to use new version of AMIP files distributed 2016-06-09.
(edit) @3074   5 years jgipsl Homogenize with IPSLCM6 : start ATM component from coupled run.
(edit) @3072   5 years jgipsl Update to correspond to IPSLCM6.0.7: - Updated version of LMDZ_Physics - …
(edit) @3071   5 years jgipsl Added new physics as done in IPSLCM6
(edit) @3057   5 years jgipsl - Copy limit.nc, climoz_LMDZ.nc, start.nc and startphy.nc from IGCM/ATM …
(edit) @3056   5 years jgipsl Updated values for GHG according to CMIP6 forcings.
(edit) @3055   5 years jgipsl Changed greenhouse gazes to use new CMIP6 forcing files. Note the file …
(edit) @3052   5 years jgipsl Corrected type error
(edit) @3050   5 years jgipsl Update
(edit) @3047   5 years jgipsl Enhancement on the use of WriteFrequency? for sechiba component. This …
(edit) @3045   5 years jgipsl PFTmap input files moved to ${R_IN}/SRF/PFTMAPS/CMIP5/ Old path is still …
(edit) @3044   5 years jgipsl Correction: solar forcing depends on calendar
(edit) @3043   5 years jgipsl Corrected error in path in previous commit
(edit) @3042   5 years jgipsl Update LMDZOR/clim_pdControl experiment to copy all input files from IGCM …
(edit) @3040   5 years jgipsl Change to the newest physics also for CREATE experiments
(edit) @3039   5 years jgipsl Updated default number of MPI and OMP to be suitable for the new default …
(edit) @3038   5 years jgipsl Update LMDZOR_v6 default options to the same as in IPSLCM6.0.6: * …
(edit) @3037   5 years jgipsl Commented monitoring of scalars as done in IPSLCM6
(edit) @3036   5 years jgipsl Added gcm.def for new physics
(edit) @3035   5 years jgipsl Updated experiment LMDZ/clim due to previous commit
(edit) @3034   5 years jgipsl Updated LMDZOR_v6 with IPSLCM6: * now activate flag_aerosol_strat=2 and …
(edit) @3032   5 years jgipsl * iphysiq is not longer changed in the lmdz.driver. * gcm.def now has the …
(edit) @3031   5 years jgipsl Delete intermediate versions of new physics as done in IPSLCM6
(edit) @3017   5 years aclsce - Use of new GHG CFC11 and CFC12 CMIP6 values for IPSLCM6 and LMDZOR_v6 …
(edit) @3016   5 years jgipsl Updated input file list needed for orchidee due to changes in previous …
(edit) @3015   5 years jgipsl Updated as done for IPSLCM6.0.6 : removed tracer RN, PB and changed to use …
(edit) @3013   5 years jgipsl Added argument -prod to make it visible witch optimisation mode is …
(edit) @3009   5 years jgipsl Added resoultion 96x95x79 for compilation
(edit) @2958   5 years jgipsl Added transpir as time-series. It is needed for the monitoring.
(edit) @2957   5 years jgipsl Removed CONTFRAC as time-serie and add it in GatherWithInternal?. …
(edit) @2955   5 years jgipsl - Removed CO2FLUX from TS : this variable is not written anymore by …
(edit) @2952   5 years jgipsl Correction on monitoring of vegetation fractions
(edit) @2951   5 years jgipsl Change comment to correct path to o2a.nc file
(edit) @2947   5 years jgipsl Homogenization of .cards, mainly for time-series
(edit) @2946   5 years jgipsl Activate ROUGH_DYN=y (Su parametrization) as already done in IPSLCM6
(edit) @2938   5 years jgipsl Change name from CREATE_clim to CREATE_clim_360d
(edit) @2937   5 years jgipsl Change name for experience clim into clim_360d.
(edit) @2936   5 years jgipsl Change name for experience clim into clim_360d to make it obvious which …
(edit) @2934   5 years jgipsl Update time-series and monitoring for orchidee (only sechiba) component
(edit) @2932   5 years jgipsl - Added TS variables for orchidee (water budget) - Added frac_snow as TS - …
(edit) @2929   5 years jgipsl Added new physiq version for LMDZ. To be used with LMDZ/testing 2595
(edit) @2928   5 years jgipsl Update configuration LMDZOR_v6 to be used with LMDZ/testing 2595 and …
(edit) @2919   5 years jgipsl Add comment
(edit) @2915   5 years lfairhead Updating the LMDZ/XIOS files to testing version 2542 LF
(edit) @2914   5 years lfairhead Missing some default parameters from the convection.def file inclusion Of …
(edit) @2911   5 years jgipsl pmagic can now be set in lmdz.card. The default value (always 0.0) is used …
(edit) @2910   5 years jgipsl - Removed ok_strato and ok_hines from physiq.def. These flags are set in …
Note: See TracRevisionLog for help on using the revision log.