source: CONFIG/UNIFORM/v6/LMDZOR_v6

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @3677   3 years jgipsl Copied file from gcm.def_512x360_NPv6.0.15_S
(edit) @3676   3 years jgipsl Updated ce0l experiments to use CMIP6 ozone files. Note LMDZ/trunk …
(edit) @3675   3 years jgipsl Add parameter files for NPv6.1 by coping them from IPSLCM6
(edit) @3674   3 years jgipsl Changed to use new version historical.v20160711.v2/interpol of climoz …
(edit) @3647   3 years acosce modification to save create_etat_limit.e.err and create_etat_limit.e.out …
(edit) @3637   3 years jgipsl Set higher output level for stomate_history.nc file. This level was …
(edit) @3617   3 years jgipsl Added resolution 512x360x79 corresponding to about 50km horizonal …
(edit) @3616   3 years jgipsl Added experience amip_nudge and synchronize drivers.
(edit) @3612   3 years jgipsl Added forced experience with nudging activated
(edit) @3593   3 years jgipsl Added changes done in LMDZOR_v6 in commit [3592]. L Fairhead.
(edit) @3592   3 years lfairhead To correct the bug on the convection output variables that were set to 0 …
(edit) @3591   3 years jgipsl Changed default physics to use LMDZ_Physics=NPv6.0.15_T
(edit) @3590   3 years jgipsl Added files from IPSLCM6.
(edit) @3589   3 years jgipsl Use new path to UReading climoz files. They have been reorganized at the …
(edit) @3577   3 years jgipsl Correction on woodharvest forcing in monitoring. note this variable do not …
(edit) @3573   3 years jgipsl Default values have been changed in ORCHIDEE/trunk revision 4962, see …
(edit) @3572   3 years jgipsl Small clean: - removed VEGET_YEAR and VEGET_REINIT not meaningfull when …
(edit) @3568   3 years jgipsl Add co2_ppm_per in config.def. Read CO2.txt in the driver and multiply by …
(edit) @3564   3 years jgipsl Correct error in previous commit, read from orchidee.card and not …
(edit) @3563   3 years jgipsl Changed strategy for settings for output files for ORCHIDEE. Activate …
(edit) @3557   3 years jgipsl monitoring_orchidee/sechiba: * delta_water_stock, water_budget_closure and …
(edit) @3554   3 years jgipsl Allow vegetation to start grow again after it has died out by activating …
(edit) @3550   3 years jgipsl Corrected comment as done in IPSLCM6
(edit) @3540   3 years jgipsl - Changed name for monitoring maxveget_forcing into maxvegetagri_forcing …
(edit) @3539   3 years jgipsl Propagate modification done in IPSLCM6 config.
(edit) @3537   3 years jgipsl Added option VEGET_UPDATE_at_start in orchidee.card and driver. This …
(edit) @3531   3 years jgipsl Added files
(edit) @3530   3 years jgipsl * Update version LMDZ_Physics in LMDZOR experiments * Update limit and …
(edit) @3529   3 years jgipsl Update as done in [3527]
(edit) @3528   3 years jgipsl Moved parameter to a better place in the file.
(edit) @3517   3 years jgipsl Remove file_def_orchidee.xml from PARAM directory and now copy it again …
(edit) @3508   3 years jgipsl Updated aersols version in LMDZOR_v6 as done in IPSLCM6 [3507]
(edit) @3506   3 years jgipsl Update ORCHIDEE component for IPSLCM6.0.14. * new PFT map files, still …
(edit) @3505   3 years jgipsl Updated LMDZOR_v6 for modifications related to CMIP6 workflow as done in …
(edit) @3460   4 years jgipsl Corrected LMDZOR experiments due to change in calendar : * amip : keep …
(edit) @3459   4 years jgipsl Copied temporary file_def_orchidee.xml from ORCHIDEE/trunk into PARAM …
(edit) @3458   4 years jgipsl Updated LMDZOR_v6 config as done for IPSLCM6.0.13
(edit) @3436   4 years jgipsl Output variable veget_max from Orchidee changed name into veget_cov_max …
(edit) @3433   4 years jgipsl Correction in file name as done in IPSLCM6 config.
(edit) @3430   4 years jgipsl Set parameter for text output level for ORCHIDEE, PRINTLEV=1.
(edit) @3429   4 years jgipsl Update to use v3.1corr version of solarforcing files, as done in IPSLCM6.
(edit) @3426   4 years jgipsl Add NVM and PFT_TO_MTC to be abel to run Choisnel hydrology with the new …
(edit) @3425   4 years jgipsl Update monitoring as done in IPSLCM6 [3420]
(edit) @3422   4 years jgipsl Corrected error in path for woodharvest file.
(edit) @3418   4 years jgipsl Update ORCHIDEE component for version 6.0.13: - change input file for …
(edit) @3417   4 years jgipsl Update LMDZOR_v6 as done in IPSLCM6 for stratospheric aerosol version 3 …
(edit) @3406   4 years tlurton Changed QBO diag to 5000 hPa and -5deg/+5deg average.
(edit) @3400   4 years jgipsl Set a default value for solaire parameter to make it easier to run a …
(edit) @3379   4 years jgipsl As done in previous commit now also for LMDZOR_v6 : Preparing for …
(edit) @3376   4 years jgipsl Update LMDZOR_v6 for LMDZ version 6.0.12 as done in IPSLCM6.
(edit) @3367   4 years jgipsl As done in IPSLCM6.0.12: Modified cld* parameters in physiq.def NPv6.0.12
(edit) @3362   4 years jgipsl Update LMDZOR_v6 configuration following IPSLCM6.0.12 : * take new …
(edit) @3340   4 years jgipsl Remove resolution 44x43x19 : this resolution can not compile because LMDZ …
(edit) @3323   4 years jgipsl Update physiq.def_NPv6.0.11 as done in IPSLCM6 revision [3310], [3311] and …
(edit) @3301   4 years jgipsl Add new physiques for IPSLCM6.0.11 as done in IPSLCM6
(edit) @3291   4 years jgipsl Update version of limit.nc and start/startphy files : now use the same as …
(edit) @3289   4 years jgipsl Adapt CREATE_clim and CREATE_amip * Now use new amip files from …
(edit) @3288   4 years jgipsl Updated ORCHIDEE component for IPSLCM6.0.11. To be used with ORCHIDEE …
(edit) @3287   4 years jgipsl Add variable in monitoring and remove variable ts absvisaer as done in …
(edit) @3255   4 years jgipsl Update
(edit) @3248   4 years jgipsl Parameter was set twice.
(edit) @3247   4 years jgipsl Added physiq NPv6.0.10 and use as default, as done in IPSLCM6.
(edit) @3222   4 years jgipsl - Deactivate Metrics calculation in all experiments. - Set …
(edit) @3205   4 years jgipsl Output file for ORCHIDEE changed name. To be used with ORHCIDEE/trunk …
(edit) @3201   4 years jgipsl Add new output file sechiba_history_4D.nc for ORCHIDEE. This file contains …
(edit) @3200   4 years jgipsl orchidee.driver : add modification for new file sechiba3 in ORCHIDEE. This …
(edit) @3197   4 years jgipsl Activate soil resistance in ORCHIDEE (option DO_RSOIL) for IPSLCM6.0.10 …
(edit) @3195   4 years jgipsl Change some TS in LMDZOR experiements as done in IPSLCM6 rev [3121] and …
(edit) @3170   4 years jgipsl Replaced path IGCM/ATM/IPSLCM6 by IGCM/ATM/START due to changes in IGCM …
(edit) @3169   4 years jgipsl Updated version of LMDZ_Physics as done in IPSLCM6 Removed duplicated …
(edit) @3155   4 years jgipsl Added new parameter files as done in IPSLCM6
(edit) @3141   4 years jgipsl Removed new option for soil resistance from ORCHIDEE parameter file.
(edit) @3139   4 years jgipsl update readme
(edit) @3138   4 years jgipsl As done in IPSLCM6: use more 71 MPI (2 latitude bands/1MPI) and update …
(edit) @3133   4 years jgipsl Add from IPSLCM6
(edit) @3132   4 years jgipsl Update to use LMDZ_Physics=NPv6.0.8 in all LMDZ and LMDZOR experiments as …
(edit) @3131   4 years jgipsl Update as done in IPSLCM6
(edit) @3128   4 years jgipsl Changes as done in IPSLCM6 rev [3121] : - change in time serie variables …
(edit) @3127   4 years jgipsl - Added comments in Script_Output for the parameter solaire which is …
(edit) @3122   4 years jgipsl Let ins_make add compile argument only at ciclad/climserv for compilation …
(edit) @3113   4 years jgipsl Change in comment
(edit) @3112   4 years jgipsl Add line in comment for compiling at ciclad
(edit) @3111   4 years jgipsl Changed version of new PFTmap files, from v1 to v1.2. The only …
(edit) @3104   4 years jgipsl Add copy of file_def_histstrataer_lmdz.xml from LMDZ sources. This file is …
(edit) @3095   4 years jgipsl remove space in the end of the line
(edit) @3094   4 years jgipsl Missing continuation of the line.
(edit) @3093   4 years jgipsl Modified set up of orchidee to fit with IPSLCM6.0.8. To benefit from all …
(edit) @3092   4 years jgipsl Add scalar forcing as done in IPSLCM6.
(edit) @3084   4 years jgipsl * Changed version of limit.nc files due to a bug on the sea ice fraction …
(edit) @3079   4 years jgipsl Removed paramLMDZ_phy.nc file. The corresponding variables are now in …
(edit) @3075   4 years jgipsl Update to use new version of AMIP files distributed 2016-06-09.
(edit) @3074   4 years jgipsl Homogenize with IPSLCM6 : start ATM component from coupled run.
(edit) @3072   4 years jgipsl Update to correspond to IPSLCM6.0.7: - Updated version of LMDZ_Physics - …
(edit) @3071   4 years jgipsl Added new physics as done in IPSLCM6
(edit) @3057   4 years jgipsl - Copy limit.nc, climoz_LMDZ.nc, start.nc and startphy.nc from IGCM/ATM …
(edit) @3056   4 years jgipsl Updated values for GHG according to CMIP6 forcings.
(edit) @3055   4 years jgipsl Changed greenhouse gazes to use new CMIP6 forcing files. Note the file …
(edit) @3052   4 years jgipsl Corrected type error
(edit) @3050   4 years jgipsl Update
(edit) @3047   4 years jgipsl Enhancement on the use of WriteFrequency? for sechiba component. This …
Note: See TracRevisionLog for help on using the revision log.