source: CONFIG/UNIFORM/v7

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @6915   5 months cetlod CM7_work : Minor changes in NEMO domain configuration
(edit) @6914   5 months cetlod CM7_work : Add additional gas tracers in NEMOv4+PISCES experiments
(edit) @6907   6 months acosce Add IPSLESM-reg to subconfig list for compilation
(edit) @6906   6 months acosce Add experiment to run coupled model with AER chemistry INCA experiment
(edit) @6903   6 months abierjon Fix a bug for routing native in coupled mode. iodef.xml was not written …
(edit) @6900   6 months acosce Add file to run LMDZ with resolution 96x95 and Physics NPv6.2 (copy from …
(edit) @6898   6 months aclsce Use of PeriodDateBegin? to handle chaining runs : the default is an example …
(edit) @6895   7 months jgipsl Copied experiement and adapte to be used with ORCHIDEE_4. Corrected …
(edit) @6894   7 months jgipsl Added CreateBasefolder? in config.card to define path to the output for …
(edit) @6893   7 months jgipsl Added comment: this exeperiment can be used with both execuatble containg …
(edit) @6892   7 months acosce fixed 2 bugs with create_etat0 1- in tracers_AER_dynamico.xml there were …
(edit) @6888   7 months jgipsl Updated parameters for PFT4 and PFT7 according to …
(edit) @6886   7 months cetlod Being able to compile NEMO in debug mode without changing arch file
(edit) @6885   7 months jgipsl Added possiblity to switch to ROUTING=native. It is needed to add the …
(edit) @6883   7 months cetlod CM7_work : Bugfix to ensure NEMO-PISCES restartability
(edit) @6881   7 months aclsce Disabled zonal mean for sponge for L95 configuration to be coherent with …
(edit) @6880   7 months jgipsl Copied missing file from ICOLMDZOR_v7 config into IPSLCM7
(edit) @6879   7 months jgipsl Add output file in exp pdpiControl_TUNING and add new exp with ORCHIDEE_4
(edit) @6875   8 months aclsce Update ICO*/CREATE experiments by changing the files Relief.nc and …
(edit) @6872   8 months jgipsl Corrected error in post section
(edit) @6871   8 months jgipsl Update due to several previous commit
(edit) @6870   8 months jgipsl Update all experiments using ORCHIDEE_4 according to settings choosen in …
(edit) @6869   8 months jgipsl Removed experiments not maintained anymore
(edit) @6868   8 months jgipsl Renamed file by adding suffix _v22 for ORCHIDEE_2_2 to avoid misstakes …
(edit) @6867   8 months jgipsl - Some experiments still used old traceur.def. Now all use tracer.def - …
(edit) @6863   8 months jgipsl Added missing l. After this correction, it is now possible to compile …
(edit) @6861   8 months jgipsl Temporary file not needed anymore. It was already taken from …
(edit) @6859   8 months jgipsl Handel new output file sechiba_stomate_history that can be set in …
(edit) @6858   8 months jgipsl Follow up on previous commit. Change ExperimentName? according to the new …
(edit) @6857   8 months jgipsl Update on experiement for pdControl_TUNING. - Changed name from …
(edit) @6856   8 months jgipsl Switch off default compilation of regular grid. When compiling the full …
(edit) @6855   8 months jgipsl Corrected so that all experiments output out_orchidee* This is done …
(edit) @6852   8 months jgipsl Corrected error on inverted variables. This error do not have any …
(edit) @6851   8 months jgipsl For these experiments with ORCHIDEE_2_2, the xml files must be copied from …
(edit) @6846   8 months acosce modified file_dynamico*xml for LAM-INCA with new way to manage xml in …
(edit) @6844   8 months acosce solve a problem when variable are regrid on regular grid
(edit) @6843   8 months acosce modification in IPSLCM7_WORK for subconfiguration ICOLMDZORINCA and …
(edit) @6842   8 months acosce Add possibility to drive tracer number (nqtot) for LAM configuration
(edit) @6841   8 months acosce update restart path for ICOLMDZORINCA AER simulation
(edit) @6840   8 months jgipsl Enhencement on compression option by tar. Now do not keep the modeles …
(edit) @6838   8 months aclsce Modified IPSLCM7 configuration as follows : - added DYNAMICO_XML in …
(edit) @6834   8 months acosce Add comments to avoid error when using nudging in regular or unstructured …
(edit) @6828   8 months jgipsl Check if LMDZ/libo exists before compression. Needed when compiling …
(edit) @6827   8 months jgipsl Add option to compress XIOS and LMDZ/libo in tar files after compilation. …
(edit) @6825   9 months cetlod Minor modifications to switch to NEMO4.2.2
(edit) @6824   9 months cetlod CM7: Being able to run NEMO with XIO2 or XIO3
(edit) @6822   9 months jgipsl Added ORCHIDEE_interp_diag.nc and forcing_by_ORCHIDEE.nc among the output …
(edit) @6821   9 months aclsce Updated to be used with DYNAMICO last revision.
(edit) @6820   9 months jgipsl Removed deactivation of REOSLUTION_X, RESOLUTION_Y and CONTFRAC_STOMATE by …
(edit) @6819   9 months acosce fixed a bug on H2O tracers names (H2O_ instead of H2O-)
(edit) @6818   9 months aclsce Added information on the o2a.nc land/sea mask file to fit with IPSLCM-reg …
(edit) @6815   9 months acosce rename inca output file veget.nc on coupling.nc
(edit) @6814   9 months acosce update dynamico.card in case of create_etat0 with tracers
(edit) @6813   9 months cetlod Bugfix in namelist_top : change coef for input dust of phosporus and …
(edit) @6809   9 months lfairhead Arch files for gnu environment on CINES adastra
(edit) @6808   9 months lfairhead adastra is pick about the order of parameters
(edit) @6801   9 months aclsce Store start0.nc (instead of start.nc) in CREATE ICO* experiments.
(edit) @6798   9 months acosce update card to save out_xios file in Debug directories
(edit) @6797   9 months acosce update create_etat0_limit for configuration ICOLMDZORINCA
(edit) @6791   10 months aclsce Merge ICOLMDZORINCA_v7_work into IPSLCM7_work * Added LAM experiments …
(edit) @6789   10 months aclsce Updated related to new DYNAMICO and ICOSA_LMDZ revisions. - Use of fcm2 to …
(edit) @6786   10 months jgipsl Removed file_def_orchidee.xml from GENERAL/PARAM folder and always take …
(edit) @6783   10 months acosce update initial state file for NMHC_AER_S chemistry configuration in …
(edit) @6780   10 months acosce Update experiment GES for ICOLMDZORINCA * use ERA5 limit.nc file * use …
(edit) @6779   10 months acosce update co2 forcing file to use one with lower resolution
(edit) @6778   10 months aclsce Removed SOURCES/LMDZ not used anymore.
(edit) @6776   10 months acosce update config.card for AER experiment we need to restart from scratch for …
(edit) @6773   10 months cetlod CM7: Load the nco module for JZ
(edit) @6772   10 months cetlod CM7ISO: Load the nco module in the environnement even when computing
(edit) @6771   10 months cetlod CM7: Load the nco module in the environnement even when computing
(edit) @6763   10 months acosce update compile_ipslcm7 to remove modification of LMDZ sources
(edit) @6762   10 months acosce update several parameters in configuration LMDZORINCA CM7 : * update …
(edit) @6760   10 months snguyen Added automatic isotope_restart setup to 0 when initialising with rayleigh …
(edit) @6757   11 months aclsce Added arch_path as argument of makelmdz_fcm, to use arch.env of the …
(edit) @6746   11 months snguyen update IPSLCM7ISO with LMDZISO amip experiment
(edit) @6745   11 months snguyen Creating ISO branch of IPSLCM7 config directory
(edit) @6743   12 months aclsce Added nbp60 case for interpolation target grid.
(edit) @6738   12 months acosce update initial state file for AER default experiment
(edit) @6733   12 months aclsce Disabled relaxation to zonal mean for sponge layer in order to have …
(edit) @6731   12 months aclsce Modified to add the "CMIP6 workflow" functionality as output mode.
(edit) @6730   12 months aclsce Modified to add the "CMIP6 workflow" functionality as output mode.
(edit) @6727   12 months jgipsl Add possiblity to compile only ORCHIDEE offline configuration
(edit) @6725   12 months jgipsl Link OASIS library to ORCHIDEE executables (offline drivers) when XIOS is …
(edit) @6722   12 months acosce fix a bug when DYNAMICO is not extracted in IPSLCM7 configuration
(edit) @6721   12 months acosce Back to relaxation to zonal mean for sponge layer
(edit) @6720   12 months acosce Disabled relaxation to zonal mean for sponge layer in order to have …
(edit) @6719   12 months acosce Add Cesmep parameter in all config.card of IPSLCM7 experiments Value is to …
(edit) @6710   12 months aclsce Back to relaxation to zonal mean for sponge layer
(edit) @6709   12 months aclsce Disabled relaxation to zonal mean for sponge layer in order to have …
(edit) @6707   12 months jgipsl - Change folder name ORCHIDEE_trunk into ORCHIDEE_4. - Change suffix name …
(edit) @6706   12 months acosce correction of a bug for ico grid (need to specify the convection scheme)
(edit) @6705   12 months jgipsl Now compile orchidee offline driver by default. Corrected executable …
(edit) @6704   12 months acosce Add parameter to activate or not Cesmep Atlas comparison at the end of the …
(edit) @6703   13 months acosce fixed a bug in case we just compile lmdz in regular grid
(edit) @6702   13 months acosce use tracer.def instead of traceur.def in CREATE experiments (results are …
(edit) @6701   13 months acosce fixed a bug in tracer.def the convection scheme used for the gas phase of …
(edit) @6700   13 months acosce fixed a bug in lmdz.card in case of ce0l (copy of iodef.xml was missing in …
(edit) @6698   13 months acosce add new inca parameter in inca.def
(edit) @6692   13 months acosce update compilation script for IPSLCM7 : * remove test on svn revision …
(edit) @6691   13 months jgipsl Added possibility to activate compilation of ORCHIDEE offline drivers.
Note: See TracRevisionLog for help on using the revision log.