source: CONFIG

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @6907   2 months acosce Add IPSLESM-reg to subconfig list for compilation
(edit) @6906   2 months acosce Add experiment to run coupled model with AER chemistry INCA experiment
(edit) @6905   2 months cetlod Minor correction in domain_cfg
(edit) @6904   2 months cetlod Minor changes in PISCES burial parameters
(edit) @6903   2 months abierjon Fix a bug for routing native in coupled mode. iodef.xml was not written …
(edit) @6902   3 months cetlod The bug breaking restartability in NEMO-PISCES has been fixed. Removed …
(edit) @6900   3 months acosce Add file to run LMDZ with resolution 96x95 and Physics NPv6.2 (copy from …
(edit) @6898   3 months aclsce Use of PeriodDateBegin? to handle chaining runs : the default is an example …
(edit) @6897   3 months aclsce Removed IPSLCM5A2 directory from this configuration (we want only models).
(edit) @6896   3 months aclsce Registered IPSLCM5A2 configuration to be used in publications.
(edit) @6895   3 months jgipsl Copied experiement and adapte to be used with ORCHIDEE_4. Corrected …
(edit) @6894   3 months jgipsl Added CreateBasefolder? in config.card to define path to the output for …
(edit) @6893   3 months jgipsl Added comment: this exeperiment can be used with both execuatble containg …
(edit) @6892   3 months acosce fixed 2 bugs with create_etat0 1- in tracers_AER_dynamico.xml there were …
(edit) @6890   4 months cetlod NEMO : Being able to compile NEMO in debug mode without changing arch file
(edit) @6888   4 months jgipsl Updated parameters for PFT4 and PFT7 according to …
(edit) @6886   4 months cetlod Being able to compile NEMO in debug mode without changing arch file
(edit) @6885   4 months jgipsl Added possiblity to switch to ROUTING=native. It is needed to add the …
(edit) @6883   4 months cetlod CM7_work : Bugfix to ensure NEMO-PISCES restartability
(edit) @6881   4 months aclsce Disabled zonal mean for sponge for L95 configuration to be coherent with …
(edit) @6880   4 months jgipsl Copied missing file from ICOLMDZOR_v7 config into IPSLCM7
(edit) @6879   4 months jgipsl Add output file in exp pdpiControl_TUNING and add new exp with ORCHIDEE_4
(edit) @6877   4 months cetlod NEMOv6.5 : Bugfix to ensure NEMO-PISCES restartability
(edit) @6876   4 months cetlod NEMOv6.5 : minor changes in namelist parameters
(edit) @6875   4 months aclsce Update ICO*/CREATE experiments by changing the files Relief.nc and …
(edit) @6872   4 months jgipsl Corrected error in post section
(edit) @6871   4 months jgipsl Update due to several previous commit
(edit) @6870   4 months jgipsl Update all experiments using ORCHIDEE_4 according to settings choosen in …
(edit) @6869   4 months jgipsl Removed experiments not maintained anymore
(edit) @6868   4 months jgipsl Renamed file by adding suffix _v22 for ORCHIDEE_2_2 to avoid misstakes …
(edit) @6867   4 months jgipsl - Some experiments still used old traceur.def. Now all use tracer.def - …
(edit) @6866   5 months jgipsl Update as done in IPSLCM6.2 done 3 years ago…
(edit) @6865   5 months jgipsl Homogenization between IPSLCM6.2 and LMDZOR_v6.2, LMDZOR_v6.3 and …
(edit) @6864   5 months jgipsl Copied tracer.def on new format from IPSLCM6.2 configuration.
(edit) @6863   5 months jgipsl Added missing l. After this correction, it is now possible to compile …
(edit) @6861   5 months jgipsl Temporary file not needed anymore. It was already taken from …
(edit) @6860   5 months jgipsl Handel new output file sechiba_stomate_history that can be set in …
(edit) @6859   5 months jgipsl Handel new output file sechiba_stomate_history that can be set in …
(edit) @6858   5 months jgipsl Follow up on previous commit. Change ExperimentName? according to the new …
(edit) @6857   5 months jgipsl Update on experiement for pdControl_TUNING. - Changed name from …
(edit) @6856   5 months jgipsl Switch off default compilation of regular grid. When compiling the full …
(edit) @6855   5 months jgipsl Corrected so that all experiments output out_orchidee* This is done …
(edit) @6852   5 months jgipsl Corrected error on inverted variables. This error do not have any …
(edit) @6851   5 months jgipsl For these experiments with ORCHIDEE_2_2, the xml files must be copied from …
(edit) @6849   5 months acosce modify name of inca output file veget.nc in coupling.nc
(edit) @6846   5 months acosce modified file_dynamico*xml for LAM-INCA with new way to manage xml in …
(edit) @6845   5 months tlurton Added output of PISCES _gastrc.nc files in ESM mode.
(edit) @6844   5 months acosce solve a problem when variable are regrid on regular grid
(edit) @6843   5 months acosce modification in IPSLCM7_WORK for subconfiguration ICOLMDZORINCA and …
(edit) @6842   5 months acosce Add possibility to drive tracer number (nqtot) for LAM configuration
(edit) @6841   5 months acosce update restart path for ICOLMDZORINCA AER simulation
(edit) @6840   5 months jgipsl Enhencement on compression option by tar. Now do not keep the modeles …
(edit) @6838   5 months aclsce Modified IPSLCM7 configuration as follows : - added DYNAMICO_XML in …
(edit) @6834   5 months acosce Add comments to avoid error when using nudging in regular or unstructured …
(edit) @6833   5 months aclsce Added README to describe the contains of the configuration.
(edit) @6832   5 months aclsce Registered ICOLMDZOR_LAM configuration to be used in publications.
(edit) @6828   5 months jgipsl Check if LMDZ/libo exists before compression. Needed when compiling …
(edit) @6827   5 months jgipsl Add option to compress XIOS and LMDZ/libo in tar files after compilation. …
(edit) @6825   5 months cetlod Minor modifications to switch to NEMO4.2.2
(edit) @6824   5 months cetlod CM7: Being able to run NEMO with XIO2 or XIO3
(edit) @6823   5 months cpipsl Corrections required for running in ESMCO2 mode: Addition of sn_rcv_iceflx …
(edit) @6822   5 months jgipsl Added ORCHIDEE_interp_diag.nc and forcing_by_ORCHIDEE.nc among the output …
(edit) @6821   5 months aclsce Updated to be used with DYNAMICO last revision.
(edit) @6820   5 months jgipsl Removed deactivation of REOSLUTION_X, RESOLUTION_Y and CONTFRAC_STOMATE by …
(edit) @6819   5 months acosce fixed a bug on H2O tracers names (H2O_ instead of H2O-)
(edit) @6818   6 months aclsce Added information on the o2a.nc land/sea mask file to fit with IPSLCM-reg …
(edit) @6816   6 months cetlod Improvment to be able to run NEMO configurations with xios2 and xios3
(edit) @6815   6 months acosce rename inca output file veget.nc on coupling.nc
(edit) @6814   6 months acosce update dynamico.card in case of create_etat0 with tracers
(edit) @6813   6 months cetlod Bugfix in namelist_top : change coef for input dust of phosporus and …
(edit) @6812   6 months cetlod Bugfix in namelist_top : change coef for input dust of phosporus and …
(edit) @6811   6 months acosce since shakonemo rev 321 we don't need anymore to overwrite this routine
(edit) @6809   6 months lfairhead Arch files for gnu environment on CINES adastra
(edit) @6808   6 months lfairhead adastra is pick about the order of parameters
(edit) @6806   6 months acosce add input file for forcing N2O and DMS in pisces
(edit) @6805   6 months acosce update namelist_pisces and namelist_top to include N2O and DMS read from …
(edit) @6804   6 months acosce update number of output files - remove CO2 and DMS output, Add N2O ones
(edit) @6802   6 months acosce remove modification of LMDZ sources via compilation in IPSLCM6.3_work …
(edit) @6801   6 months aclsce Store start0.nc (instead of start.nc) in CREATE ICO* experiments.
(edit) @6799   6 months falletti LMDZREPR_v6: Set tau_gl=2. in lmdz.card (bug in 1956-07 without this …
(edit) @6798   6 months acosce update card to save out_xios file in Debug directories
(edit) @6797   6 months acosce update create_etat0_limit for configuration ICOLMDZORINCA
(edit) @6795   6 months acosce update Experiments with chemistry in IPSLCM6.3 subconfigurations IPSLESM …
(edit) @6794   6 months acosce Change name of vegetation coupling output file of INCA configuration, to …
(edit) @6793   6 months acosce Add sbccpl routine need for coupling n2o between ocean and atmosphere
(edit) @6791   6 months aclsce Merge ICOLMDZORINCA_v7_work into IPSLCM7_work * Added LAM experiments …
(edit) @6789   6 months aclsce Updated related to new DYNAMICO and ICOSA_LMDZ revisions. - Use of fcm2 to …
(edit) @6787   7 months jgipsl Add option to compress XIOS and LMDZ/libo in tar files after compilation. …
(edit) @6786   7 months jgipsl Removed file_def_orchidee.xml from GENERAL/PARAM folder and always take …
(edit) @6785   7 months acosce update path for NAT flux forcing files there was a bug on h2s in …
(edit) @6784   7 months acosce Update Experiments LR in LMDZORINCA_v6.2 to fit with IPSLCM7_work …
(edit) @6783   7 months acosce update initial state file for NMHC_AER_S chemistry configuration in …
(edit) @6780   7 months acosce Update experiment GES for ICOLMDZORINCA * use ERA5 limit.nc file * use …
(edit) @6779   7 months acosce update co2 forcing file to use one with lower resolution
(edit) @6778   7 months aclsce Removed SOURCES/LMDZ not used anymore.
(edit) @6776   7 months acosce update config.card for AER experiment we need to restart from scratch for …
(edit) @6773   7 months cetlod CM7: Load the nco module for JZ
(edit) @6772   7 months cetlod CM7ISO: Load the nco module in the environnement even when computing
(edit) @6771   7 months cetlod CM7: Load the nco module in the environnement even when computing
(edit) @6770   7 months cetlod CM6.5: Load the nco module in the environnement even when computing
Note: See TracRevisionLog for help on using the revision log.