Timeline


and

08/03/17:

20:00 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)
17:12 Changeset [3351] by jgipsl
Update revision of libIGCM due to bugfix for case SpaceName?=TEST on curie.
14:19 Changeset [3350] by mafoipsl
For IPSLCM6.0.12 set pmagic=0.007 in pdControl/COMP/lmdz.card
14:08 IPSLCM6/IPSLCM6.0.12-LR edited by mafoipsl
(diff)
14:04 Changeset [3349] by mafoipsl
In monitoring01_lmdz.cfg add a variable to monitor energy conservation : …
13:59 Changeset [3348] by mafoipsl
In physiq.def_NPv6.0.12 keep cld_* = 0.00009 as a first guess.
11:59 Changeset [3347] by acosce
change the name of file create by inca to forced lmdz on aerosols
11:56 IPSLCM6/IPSLCM6.0.12-LR edited by mafoipsl
(diff)
11:49 IPSLCM6/IPSLCM6.0.12-LR edited by mafoipsl
(diff)
11:39 Changeset [3346] by mafoipsl
For IPSLCM6.0.12 : * 1st try of physiq.def and gcm.def for IPSLCM6.0.12 …

08/02/17:

16:31 PerformancesIPSLCM6 edited by acosce
(diff)
15:58 IPSLCM6/IPSLCM6.0.12-LR edited by jgipsl
(diff)
15:43 Changeset [3345] by cetlod
CM6.0.12 : Monitoring of the global heat content & revising all PISCES …
15:38 Changeset [3344] by cetlod
CM6.0.12: Adding modified NEMO routines to properly handle outputs when …
12:45 Changeset [3343] by jgipsl
Update rev for ORCHIDEE_OL configuration directory.
12:38 PerformancesIPSLCM6 edited by mafoipsl
(diff)
12:25 Changeset [3342] by jgipsl
Change to use trunk/libIGCM rev 1406 for LMDZOR_v6 and ORCHIDEE_OL …
12:11 PerformancesIPSLCM6 edited by mafoipsl
(diff)
11:54 Changeset [3341] by jgipsl
Update LMDZOR_v6 configuration according to IPSLCM6.0.11

08/01/17:

14:10 PerformancesIPSLCM6 edited by jgipsl
(diff)
14:09 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)
14:05 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)
12:39 PerformancesIPSLCM6 edited by jgipsl
(diff)

07/28/17:

17:05 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)
16:34 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)
16:06 Changeset [3340] by jgipsl
Remove resolution 44x43x19 : this resolution can not compile because LMDZ …
11:05 Changeset [3339] by acosce
update revision number on lmdzorinca_v6 (6.0.11) configuration
11:04 Changeset [3338] by acosce
update path for limit.nc file on lmdzorinca AER_pdControl experiment

07/27/17:

19:18 Changeset [3337] by mafoipsl
namelist_ORCA1_cfg : change 3 parameter to follow 6.0.11.3.
16:07 Changeset [3336] by acosce
correcting a typo error
16:06 Changeset [3335] by acosce
update revision number for the config/LMDZORINCA_v6 version
16:04 Changeset [3334] by acosce
remove a file in inca configuration, this file is not use in aerosol case
16:04 Changeset [3333] by acosce
use new files for the aerosol deposition in Inca
15:10 Changeset [3332] by acosce
Create new configuration lmdzorinca (closest version to IPSLCM6.0.11)
14:08 Changeset [3331] by acosce
correct a bug in a path file for the configuration lmdzorinca
12:57 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)

07/26/17:

19:31 IPSLCM6-MR edited by mafoipsl
(diff)
19:28 IPSLCM6-MR created by mafoipsl
19:12 IPSLCM6 edited by mafoipsl
(diff)
17:48 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)
10:33 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
10:32 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
10:32 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
10:31 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
10:31 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
10:27 BugOasisBilinear.png attached to IPSLCM6/Coupling/BugBilinear by omamce
Wind stress on ocean grid, U point
10:26 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
09:52 IPSLCM6/Coupling/BugBilinear edited by mafoipsl
(diff)

07/25/17:

20:05 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)
18:37 Changeset [3330] by mafoipsl
To prepare IPSLCM6.0.12 add aerosols CMIP6 v0 files. Only in comment for …
17:32 Changeset [3329] by omamce
OM: essai propset
16:51 Changeset [3328] by omamce
16:47 Changeset [3327] by omamce
O.M. : add svn info
16:37 IPSLCM6/IPSLCM6.0.12-LR edited by mafoipsl
(diff)
16:35 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)
16:26 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
16:24 Changeset [3326] by omamce
O.M. : Utility to generate interpolatio weights for OASIS-MCT
16:18 Changeset [3325] by omamce
O.M. : premier enregistrement. Utilitaire pour corriger les poids du …
15:48 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
15:36 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
15:33 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
15:25 IPSLCM6/Coupling edited by omamce
(diff)
15:25 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
14:00 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)
13:14 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)
11:49 IPSLCM6/IPSLCM6.0.11-LR edited by jmignot
(diff)

07/24/17:

18:35 IPSLCM6/IPSLCM6.0.12-LR edited by mafoipsl
(diff)
18:21 IPSLCM6/IPSLCM6.0.12-LR edited by mafoipsl
(diff)
18:19 IPSLCM6/IPSLCM6.0.12-LR edited by mafoipsl
(diff)
18:12 Ticket #114 (Modèle IPSLCM6.0.12-LR) created by mafoipsl
Version IPSLCM6.0.12-LR Creation le 24/07/2017 Voir aussi …
18:05 IPSLCM6/IPSLCM6.0.12-LR edited by mafoipsl
(diff)
17:51 Changeset [3324] by mafoipsl
In monitoring01_lmdz.cfg, let use od550_STRAT instead of OD550_STRAT. See …
15:28 Changeset [3323] by jgipsl
Update physiq.def_NPv6.0.11 as done in IPSLCM6 revision [3310], [3311] and …
15:21 Changeset [3322] by jgipsl
Clairfy text output for -h mode
15:14 Changeset [3321] by mafoipsl
In lmdz.card for TS use od550_STRAT instead of OD550_STRAT. See : …
11:03 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)
11:02 Changeset [3320] by cetlod
CM6.0.12 : remove iceberg flux from total runoffs. friver diagnostics …
10:43 IPSLCM6/IPSLCM6.0.11-LR edited by acosce
(diff)

07/21/17:

20:16 PerformancesIPSLCM6 edited by oboucher
(diff)
20:15 PerformancesIPSLCM6 edited by oboucher
(diff)
20:14 PerformancesIPSLCM6 edited by oboucher
(diff)
20:11 PerformancesIPSLCM6 edited by oboucher
(diff)
20:06 PerformancesIPSLCM6 edited by oboucher
(diff)
19:40 PerformancesIPSLCM6 edited by oboucher
(diff)
15:33 Changeset [3319] by acosce
Inca configuration : allowed inca.card to manage the parameter value for …
15:29 IPSLCM6/IPSLCM6.0.11-LR edited by acosce
(diff)

07/20/17:

21:44 PerformancesIPSLCM6 edited by oboucher
(diff)
16:06 Changeset [3318] by acosce
change a name of output file in inca configuration
15:14 Changeset [3317] by acosce
fixed a bug, a file id was missing in inca.driver for the attribution of …
14:46 IPSLCM6/IPSLCM6.0.12-LR edited by mafoipsl
(diff)
14:42 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)
12:17 IPSLCM6/IPSLCM6.0.11-LR edited by acosce
(diff)
10:30 IPSLCM6/IPSLCM6.0.11-LR edited by acosce
(diff)
10:29 IPSLCM6/IPSLCM6.0.11-LR edited by acosce
(diff)

07/18/17:

19:53 IPSLCM6/Coupling/BugBilinear edited by oboucher
(diff)
15:01 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
15:00 IPSLCM6/Coupling edited by omamce
(diff)
14:53 IPSLCM6/IPSLCM6.0.11-LR edited by cetlod
(diff)
14:25 IPSLCM6/IPSLCM6.0.11-LR edited by acosce
(diff)
14:05 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
14:04 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
13:58 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
13:55 IPSLCM6/Coupling/BugBilinear edited by omamce
(diff)
13:53 IPSLCM6/Coupling/BugBilinear created by omamce
13:51 IPSLCM6/Coupling edited by omamce
(diff)
13:48 IPSLCM6/Coupling edited by omamce
(diff)
13:10 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
13:09 Figure_4.png attached to IPSLCM6/Coupling/BugRunOff by omamce
Figure 4 : points atmosphériques routés (verts) et points océaniques …
13:09 Figure_3.png attached to IPSLCM6/Coupling/BugRunOff by omamce
Figure 3 : points océans recevant du run-off direct d’un point atmosphère. …
13:08 Figure_2.png attached to IPSLCM6/Coupling/BugRunOff by omamce
Figure 2 : points atmosphère dont le run-off est routé directement à la …
13:07 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
12:09 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
12:04 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
12:00 Figure_1.png attached to IPSLCM6/Coupling/BugRunOff by omamce
Figure 1 : méthode de calcul de l’intersection entre les mailles océans et …
11:58 Figure_2.2.png attached to IPSLCM6/Coupling/BugRunOff by omamce
Figure 2 : points atmosphère dont le run-off est routé directement à la …
11:58 Figure_4.2.png attached to IPSLCM6/Coupling/BugRunOff by omamce
Figure 4 : points atmosphériques routés (verts) et points océaniques …
11:54 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
11:53 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
11:53 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
11:52 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
11:51 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
11:50 IPSLCM6/IPSLCM6.0.11-LR edited by jdlod
(diff)
11:48 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
11:47 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
11:46 IPSLCM6/Coupling/BugRunOff edited by omamce
(diff)
11:45 IPSLCM6/IPSLCM6.0.11-LR edited by jdlod
(diff)
11:45 IPSLCM6/Coupling/BugRunOff created by omamce
11:45 IPSLCM6/IPSLCM6.0.11-LR edited by jdlod
(diff)

07/17/17:

21:55 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
16:27 Changeset [3316] by acosce
INCA : activation of physic 6.0.11 for lmdz (in AER_pdControl …
16:01 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)
13:48 Changeset [3315] by acosce
Now we can manage the flag emi_interp_time directly from inca.card (with …

07/14/17:

23:59 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)
23:58 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)
23:58 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)
17:55 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)
17:22 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)

07/13/17:

23:51 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
23:49 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
21:21 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)
21:13 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)
14:58 IPSLCM6/IPSLCM6.0.11-LR edited by sdipsl
(diff)
14:23 IPSLCM6/IPSLCM6.0.11-LR edited by jmignot
(diff)
11:51 IPSLCM6/IPSLCM6.0.11-LR edited by cetlod
(diff)

07/12/17:

22:25 IPSLCMIP6 edited by oboucher
(diff)
21:34 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)
19:49 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)
19:39 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)
14:12 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)
14:11 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
13:18 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
13:07 Changeset [3314] by aclsce
CM6.0.11 frozen
12:50 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
12:25 Changeset [3313] by aclsce
- Changed start state for CM6.0.11
11:43 Changeset [3312] by aclsce
- New version of physiq.def (with comments,...). Exactly same parameters …
11:36 Changeset [3311] by aclsce
- Changed gwd_front_ruwmax parameter in physiq.def
11:28 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
11:21 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
11:19 IPSLCM6/IPSLCM6.0.11-LR edited by jdlod
(diff)
10:24 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
10:16 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
09:10 IPSLCM6/IPSLCM6.0.12-LR edited by oboucher
(diff)
09:01 IPSLCMIP6 edited by oboucher
(diff)
08:55 IPSLCMIP6 edited by oboucher
(diff)
08:52 IPSLCMIP6 edited by oboucher
(diff)
08:49 IPSLCMIP6 edited by oboucher
(diff)
08:48 IPSLCMIP6 edited by oboucher
(diff)
08:45 IPSLCMIP6 edited by oboucher
(diff)
08:39 Changeset [3310] by aclsce
- Modified cld_lc parameters in physiq.def

07/11/17:

15:16 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
15:15 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
15:04 Changeset [3309] by aclsce
- Created IPSLCM6.0.11 configuration
14:59 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
14:59 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
14:17 Changeset [3308] by acosce
allow for daily and monthly output in CMIP6 simulation with INCA
14:14 Changeset [3307] by acosce
fixe a bug
13:46 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
13:35 Changeset [3306] by cetlod
NEMO_v6 : minor changes in NEMO driver
11:13 IPSLCM6 edited by oboucher
(diff)
11:12 IPSLCM6 edited by oboucher
(diff)
11:12 IPSLCM6 edited by oboucher
(diff)
09:43 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
09:38 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
(diff)
09:36 IPSLCM6/IPSLCM6.0.11-LR edited by aclsce
Reverted to version 21. (diff)

07/10/17:

14:57 Changeset [3305] by acosce
put a flag to zero to remove calcul of some diagnostics
14:48 Changeset [3304] by acosce
in orchidee.card there was missing the copy of reftemp.nc file add copy …

07/07/17:

22:10 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
15:08 Changeset [3303] by aclsce
On the road to IPSLCM6.0.11
15:04 Changeset [3302] by acosce
update lmdzorinca config to prepare configuration 6.0.11
11:50 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
11:46 Changeset [3301] by jgipsl
Add new physiques for IPSLCM6.0.11 as done in IPSLCM6
11:06 IPSLCM6/IPSLCM6.0.11-LR edited by lfairhead
(diff)
10:48 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
07:45 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)
07:42 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)
07:42 IPSLCM6/IPSLCM6.0.11-LR edited by mafoipsl
(diff)

07/06/17:

17:59 Changeset [3300] by mafoipsl
For IPSLCM6.0.11 use reftemp.nc as described in ticket #113.
16:56 Changeset [3299] by cetlod
CM6.0.11 : commit the correct nemo xml file
10:58 Changeset [3298] by lfairhead
Forgot gcm.def file for IPSLCM6.0.11 configuration
10:00 Changeset [3297] by aclsce
Use of *.def_NPv6.0.11 for IPSLCM6 configuration
09:26 Changeset [3296] by lfairhead
Creation of LMDZ physics def file for IPSLCM6.0.11 configuration. …

07/05/17:

19:14 Changeset [3295] by cetlod
CM6.0.11 : minor correction on SOURCES/NEMO/zdftke.F90
18:45 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
18:27 IPSLCM6/IPSLCM6.0.10-LR edited by aclsce
(diff)
18:24 IPSLCM6/IPSLCM6.0.10-LR edited by aclsce
(diff)
17:44 Changeset [3294] by cetlod
CM6.0.11 : update card also for historical experiment
17:18 Changeset [3293] by cetlod
CM6.0.11 : add new NEMO routines & updated namelists and xml
15:10 Changeset [3292] by jgipsl
Updated limi/start/startphy as done in LMDZOR_v6 rev [3291] (o2a_v3.nc, …
15:08 Changeset [3291] by jgipsl
Update version of limit.nc and start/startphy files : now use the same as …
08:58 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)

07/04/17:

22:39 PerformancesIPSLCM6 edited by oboucher
(diff)
22:37 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
22:36 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
22:29 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
22:27 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
22:25 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
16:13 Changeset [3290] by aclsce
- Use of runoff weights v4 for IPSLCM6.0.11 configuration
16:07 Changeset [3289] by jgipsl
Adapt CREATE_clim and CREATE_amip * Now use new amip files from …
14:03 Changeset [3288] by jgipsl
Updated ORCHIDEE component for IPSLCM6.0.11. To be used with ORCHIDEE …
13:52 Changeset [3287] by jgipsl
Add variable in monitoring and remove variable ts absvisaer as done in …
11:29 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
11:12 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
11:11 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
11:11 IPSLCM6/IPSLCM6.0.11-LR edited by oboucher
(diff)
Note: See TracTimeline for information about the timeline view.