Timeline
2019-11-15:
- 21:12 Changeset [11922] by
-
Addition of output of the elapsed model time for multiple-linear-regression analysis (ticket #2175)
- 19:03 Changeset [11921] by
-
Addition of a test for the existence of a regression-analysis configuration to the IOM context setup for multiple-linear-regression analysis (ticket #2175)
- 18:38 Changeset [11920] by
-
add calculation of the look-up table for the yield surface
- 17:25 Changeset [11919] by
-
Move BULL arch file to misc folder
- 17:01 Changeset [11918] by
-
Merged in ability to start from a sea ice restart file
- 16:56 Changeset [11917] by
-
UKMO/NEMO_4.0_momentum_trends :
- Refactor so that ZDF trend always includes all bottom friction contributions. The budget can now be closed by including the ZDF trend without any BFR trends.
- Some tidying of trddyn.F90.
- 16:44 Changeset [11916] by
-
Merged in all the changes in NEMO4.0_fix_cpl_oce_only (up to revison 11832)
- 16:23 Changeset [11915] by
-
Make a NEMO4.0.1. branch off of the mirror
- 16:21 Changeset [11914] by
-
Merging in the rest of the NEMO4 GC coupling branch up to revision 11446
- 16:16 Changeset [11913] by
-
Merge in bulk of coupling changes.
- 15:46 Changeset [11912] by
-
Make branch off of NEMO4.0.1 mirror
- 13:54 Changeset [11911] by
-
Addition of a quotation mark that was missing in module diamlr (ticket #2175)
- 13:38 Changeset [11910] by
-
Inclusion of a skeletal version of the new module diamlr that will be used to manage the IOM context for multiple-linear-regression analysis of model fields (ticket #2175)
2019-11-14:
- 21:31 Changeset [11909] by
-
Detachment of the context-definition closure from subroutine iom_init of module iom to enable additional context definition outside subroutine iom_init (ticket #2175).
The closure of the context definition is now available in the new public subroutine iom_init_closedef of module iom. By default, this subroutine is called by subroutine iom_init, so that the default behaviour of iom_init remains unchanged. Optionally, subroutine iom_init can now be made to keep the context definition open by setting the optional argument ld_closedef to .FALSE.; this enables continued definition of the context until subroutine iom_init_closedef is explicitly called.
- 20:20 Changeset [11908] by
-
ENHANCE-02_ISF_nemo: fix issue initialisation after ice sheet coupling step
- 20:14 Ticket #2334 (Wrong initialization of T/S open boundary data if set from initial state) created by
-
==== Context In nambdy, if nn_tra_dta = 0 then open boundary data arrays …
- 18:15 Changeset [11907] by
-
Implementation of syntax highlighting for inline code
- 18:08 Changeset [11906] by
-
New lexer rule to highlight CPP key (key_...)
- 17:25 Changeset [11905] by
-
STATION_ASF test-cases runs 3 full years of test…
- 15:18 2020WP edited by
-
(diff)
- 15:12 2020WP edited by
-
(diff)
- 14:28 2020WP edited by
-
(diff)
- 14:17 2020WP edited by
-
(diff)
- 11:40 Changeset [11904] by
-
Branch to update 3D momentum trends diagnostics to work with split-explicit timestepping.
- 11:34 Changeset [11903] by
-
UKMO/NEMO_4.0_momentum_trends : modification to bottom friction trend diagnostic.
- 11:08 Ticket #2333 (calls to iom_put) created by
-
==== Context There are places where diagnostics are calculated …
2019-11-13:
- 20:07 Changeset [11902] by
-
ENHANCE-02_ISF_nemo: add check on presence of restart variables
- 18:27 Changeset [11901] by
-
Ticket #2323 SI3 restart read/write with XIOS for AGRIF
- 18:14 Changeset [11900] by
-
v4.0.1: bugfix in usrdef_nam.F90 for CANAL test case
- 18:14 Changeset [11899] by
-
trunk: bugfix in usrdef_nam.F90 for CANAL test case
- 17:10 Changeset [11898] by
-
Following up on Emma's branch to consolidate sea ice thickness updates for NEMO IAU
- 13:27 Changeset [11897] by
-
Change to add basal melt only if the SST is above the freezing point
- 12:40 Changeset [11896] by
-
ENHANCE-02_ISF_nemo: update ISOMIP+ test case configuration
- 12:39 Changeset [11895] by
-
ENHANCE-02_ISF_nemo: update ISOMIP+ test case configuration
- 12:38 Changeset [11894] by
-
Branch to stop iceberg melting is the temperature is above the freezing point
- 09:48 Changeset [11893] by
-
Ticket #2323 read/write SI3 restart file
- 09:44 Changeset [11892] by
-
Improving test-case STATION_ASF, use of relevant heights and depth for PAPA station.
2019-11-12:
- 16:17 Changeset [11891] by
- 16:17 Changeset [11890] by
- 12:24 Changeset [11889] by
-
ENHANCE-02_ISF_nemo: add ISOMIP+ test case configuration
- 10:46 Ticket #2332 (Reduce unnecessary computation in sbccpl.F90) created by
-
[…] ==== Context In sbccpl.F90 in sbc_cpl_ice_tau there is an if …
- 10:26 Ticket #2331 (restructure ice_dyn_rhg_evp) created by
-
==== Context In subroutine ice_dyn_rhg_evp there is a logical flag …
- 10:11 Ticket #2330 (Failure of SPITZ12 SETTE tests) created by
-
==== Context SETTE tests of the SPITZ12 reference configuration fail. …
- 10:09 Changeset [11888] by
-
Ticket #2197, small changes to improve code structure
- 10:04 Ticket #2329 (Failure of SPITZ12 SETTE tests) created by
-
==== Context SETTE tests of the SPITZ12 reference configuration fail. …
2019-11-11:
- 13:33 Changeset [11887] by
-
Modification of the externals definition for the tools directory in the NEMO development branch for action ENHANCE-05_SimonM-Harmonic_Analysis to point to the corresponding tool development branch (ticket #2175)
- 13:26 Changeset [11886] by
- 12:40 Changeset [11885] by
-
Modification of the externals definition for the tools directory in the NEMO development branch for action ENHANCE-05_SimonM-Harmonic_Analysis to point to the corresponding tool development branch (ticket #2175)
- 10:28 Changeset [11884] by
-
Delete broken symlinks
- 10:26 Changeset [11883] by
-
Mergerd in changes from Chris' working copy (except for symlink changes)
2019-11-08:
- 22:33 Changeset [11882] by
-
Inception of a tool development branch for action ENHANCE-05_SimonM-Harmonic_Analysis (2019 WP), see ticket #2175
- 22:21 Changeset [11881] by
-
Inception of a development branch for action ENHANCE-05_SimonM-Harmonic_Analysis (2019 WP), see ticket #2175
- 21:37 Changeset [11880] by
-
v4.0.1: fix in bdydta, same results but prevents that all subdomains read all bdy
- 21:36 Changeset [11879] by
-
trunk: fix in bdydta, same results but prevents that all subdomains read all bdy
- 18:25 Changeset [11878] by
-
add anisotropy output
- 17:47 2019WP/ENHANCE-05_SimonM-Harmonic_Analysis edited by
-
(diff)
- 17:27 Changeset [11877] by
-
add initialisation and restart of sturcture tensor
- 12:26 Changeset [11876] by
-
ENHANCE-02_ISF_nemo: add timing in the main isf routine + various bug fixes + cosmetic changes
- 12:00 Changeset [11875] by
-
Prevent from 0 vertical index, #2327
2019-11-07:
- 18:18 Changeset [11874] by
-
dev_r11265_ABL: output surface now ABL fields in output.init.nc file when nn_istate=1 (#2131)
- 18:15 Changeset [11873] by
-
dev_r11265_ABL: minor lbc bugfix, cleaning and additional outputs (#2131)
- 17:55 Changeset [11872] by
-
Branch 2019/fix_sn_cfctl_ticket2328. See #2328. Replacement of ln_ctl and activation of full functionality with
sn_cfctl structure. These changes rename structure components l_mppout and l_mpptop as l_prtctl and l_prttrc
and introduce l_glochk to activate former ln_ctl code in stpctl.F90 to perform global location of min and max
checks. Also added is l_allon which can be used to activate all output (much like the former ln_ctl). If l_allon
is .false. then l_config decides whether or not the suboptions are used.
sn_cfctl%l_glochk = .FALSE. ! Range sanity checks are local (F) or global (T). Set T for debugging only sn_cfctl%l_allon = .FALSE. ! IF T activate all options. If F deactivate all unless l_config is T sn_cfctl%l_config = .TRUE. ! IF .true. then control which reports are written with the remaining options
Note, these changes pass SETTE tests but all references to ln_ctl need to be removed from the sette scripts.
- 15:26 Changeset [11871] by
-
Keep up with r11870 of trunk + ref. time set to 1970 in tests/STATION_ASF/MY_SRC/iom.F90
- 12:27 Changeset [11870] by
-
Ticket #2323: open single restart write context for all restart files
- 08:26 New topic on Jobs created by
-
[phd] PhD position on Arctic ocean modelling with NEMO at DMI | Closing 16 Nov. 2019
2019-11-06:
- 17:01 Changeset [11869] by
-
Branch 2019/fix_sn_cfctl_ticket2328. Changes to enable correct functionality for the sn_cfctl%l_mppout and sn_cfctl%l_mpptop options. These changes also introduce a sn_cfctl%l_oasout option to toggle the OASIS setup information (sbccpl.F90, only) which was yet another misuse of ln_ctl. The next step may be to remove most references to ln_ctl altogether and provide a single control mechanism. TBD. See ticket #2328
- 16:43 Changeset [11868] by
-
#2222, 1) Correct sponge mainly for using AGRIF in 2DV domains, 2) Add check of bathymetry consistency
- 14:59 2019WP/ENHANCE-05_SimonM-Harmonic_Analysis edited by
-
(diff)
- 13:08 Changeset [11867] by
-
add EAP option to namelist and changes in icedyn_rhg.F90, icedyn_rhg_eap.F90 is just a copy of icedyn_rhg_evp.F90
- 11:16 Changeset [11866] by
-
Branch 2019/fix_sn_cfctl_ticket2328. Changes to enable correct functionality for the sn_cfctl%l_oceout option. See #2328
- 11:09 2019WP/ENHANCE-05_SimonM-Harmonic_Analysis edited by
-
(diff)
2019-11-05:
- 23:59 Changeset [11865] by
-
Adjustment of two tidal-constituent identifiers (ticket #2194)
- 23:40 Changeset [11864] by
-
Inclusion of string normalisation in subroutine tide_init_components of module tide_mod to permit the selection of tidal constituents irrespective of the capitalisation of their identifiers specified in the namelist (ticket #2194)
- 18:22 Changeset [11863] by
-
Merged recent changes to dev_r5518_obs_oper_update
- 17:55 Changeset [11862] by
-
Create branch 2019/fix_sn_cfctl_ticket2328
- 17:20 Changeset [11861] by
-
Pimp my STATION_ASF!
- 17:09 Changeset [11860] by
-
Update with an updated version of zdfosm.F90 from George Nurser
- 17:03 Ticket #2328 (Introduce missing functionality for sn_cfctl options) created by
-
==== Context For v4.0 the sn_cfctl structure was introduced to provide …
- 15:47 Ticket #2327 (Out of bound vertical index in 4th order vertical advection) created by
-
==== Context Compact vertical advection ==== Analysis Bottom 2nd order …
- 15:35 Changeset [11859] by
-
dev_r11265_ABL: update namelist_ref for abl restart option (#2131)
- 15:32 Changeset [11858] by
-
dev_r11265_ABL: add write/read restart options for abl (#2131)
- 15:23 Changeset [11857] by
-
dev_r11265_ABL: bulks compatibility with 3D atmospheric forcing (by reading only the first level) (#2131)
- 15:03 Changeset [11856] by
- 13:49 Changeset [11855] by
-
Restriction and removal of use statements included in module tide_mod (ticket #2194)
- 11:05 Changeset [11854] by
-
Suppression of the listing of selected tidal constituents as part of standard output unless variable lwp is set to .TRUE. (ticket #2194)
- 10:50 Changeset [11853] by
-
Make "STATION_ASF" explicitely monoproc (no MPI)
- 09:16 Ticket #2326 (further simplification of bdydta.F90) closed by
-
duplicate: The removal of the "kit" option will be done as part of …
2019-11-04:
- 19:00 Changeset [11852] by
-
ENHANCE-02_ISF_nemo: fix WED025 restartability, finish removing useless USE, remove useless lbc_lnk
- 18:06 Changeset [11851] by
-
Tiny bug-fix
- 16:43 Changeset [11850] by
-
Starting README doc of STATION_ASF…
- 14:48 Ticket #2326 (further simplification of bdydta.F90) created by
-
[…] ==== Context The optional argument "kit" in the bdy_dta routine …
- 11:49 Changeset [11849] by
-
1) Correct typo in OVERFLOW namelists 2) add implicit vertical advection in default namelist (so that it runs with 4th order advection)
- 11:48 Changeset [11848] by
-
1) Correct typo in OVERFLOW namelists 2) add implicit vertical advection in default namelist (so that it runs with 4th order advection)
- 11:19 Changeset [11847] by
-
Adding test for NCAR algoritm in STATION_ASF test-case
- 11:18 Changeset [11846] by
-
Adding test for NCAR algoritm in STATION_ASF test-case
- 11:11 Changeset [11845] by
-
Improving syntax consistency
2019-11-01:
- 21:54 Changeset [11844] by
-
rm useless lbclnk + fix reproducibility WED025 + add isf debug option
- 15:59 Changeset [11843] by
-
creating development branch for EAP rheology see ticket #2325
- 15:37 2019WP/SI3-10_EAP_rheology created by
-
- 15:20 Changeset [11842] by
-
Fix to stochastic physics code to compile with key_dynldf_c3d, and relax MEDUSA's Kw660 check.
- 15:09 Ticket #2325 (add EAP rheology to SI3) created by
-
==== Context Current EVP rheology assumes ice is isotropic, but …
2019-10-31:
- 16:39 Changeset [11841] by
-
Better use of function "bulk_formula()" (in sbcblk_phy.F90)
- 16:30 Changeset [11840] by
-
Ticket #2323 write SI3 restart with XIOS
2019-10-30:
- 17:09 Changeset [11839] by
-
Ticket #2323 correction to previous commit
- 16:26 Changeset [11838] by
-
Typo in demo_cfgs.txt
- 15:10 Changeset [11837] by
-
ticket #2323 read SI3 restart with XIOS
- 14:54 2020WP edited by
-
(diff)
- 14:52 2020WP edited by
-
(diff)
- 14:51 2020WP edited by
-
(diff)
- 14:47 2020WP edited by
-
(diff)
- 14:08 Changeset [11836] by
-
Branch 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. Merge remaining trunk changes from 11742 to 11830
- 11:08 2020WP edited by
-
(diff)
- 09:59 2020WP edited by
-
(diff)
- 09:58 2020WP edited by
-
(diff)
- 09:57 New topic on Beginner created by
-
[AGRIF_DEMO] NEMO 4 (4.0.1) CFL violation
- 09:47 2020WP edited by
-
(diff)
- 09:45 2020WP edited by
-
(diff)
- 09:44 2020WP edited by
-
(diff)
- 09:43 2020WP edited by
-
(diff)
2019-10-29:
- 19:21 Changeset [11835] by
-
ENHANCE-02_ISF_nemo: change required to pass sette test
- 18:55 Changeset [11834] by
-
Adding "EXPREF" directory for "STATION_ASF" new test-case.
- 18:44 Changeset [11833] by
-
Adding "EXPREF" directory for "STATION_ASF" new test-case.
- 18:42 New reply on Beginner created by
-
[GCC] Compilation of AGRIF_DEMO fails
- 18:21 Changeset [11832] by
-
Convert evap_ice from grid box means to sea ice means
- 18:14 Changeset [11831] by
-
Update the branch to r11830 of the trunk!
- 17:51 Changeset [11830] by
- 17:30 2020WP edited by
-
(diff)
- 17:22 2020WP edited by
-
(diff)
- 17:12 2020WP edited by
-
(diff)
- 16:56 Changeset [11829] by
-
Branch 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. update of mergeinfo property on branch root to correctly record the merge activity from trunk 10721:11740
- 16:30 Changeset [11828] by
-
DIRTY temporal debug
- 16:03 Changeset [11827] by
-
#2222, corrections to interpolation within sponge
- 15:11 Changeset [11826] by
-
SBCBLK-related physical constants all moved into "sbcblk_phy.F90".
- 14:47 Changeset [11825] by
-
New branch to slightly relax the Kw660 input check performed for MEDUSA, when running with FOAM.
- 14:13 Changeset [11824] by
-
ranch 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. Updates to top level rst files to align with trunk changes between 10721 and 11740. This commit brings this branch up-to-date with the trunk at revision 11740 with the exception of the doc directory which has not been touched on this branch.
- 12:00 Changeset [11823] by
-
rm useless USE statement, option compatibility test + minor changes
- 11:41 Changeset [11822] by
-
Branch 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. Sette tested updates to branch to align with trunk changes between 10721 and 11740. Sette tests are passing but results differ from branch before these changes (except for GYRE_PISCES and VORTEX) and branch results already differed from trunk because of algorithmic fixes. Will need more checks to confirm correctness.
- 11:08 Ticket #2324 (Incorrect array passed to lbc_lnk in trcbdy.F90) closed by
-
fixed: In 11821: […]
- 11:08 Changeset [11821] by
-
Small correction to trcbdy.F90. This fixes #2324
- 10:50 Changeset [11820] by
-
Small correction to trcbdy.F90. See #2324
- 10:48 Ticket #2324 (Incorrect array passed to lbc_lnk in trcbdy.F90) created by
-
==== Context lbc_lnk improvements made just before the 4.0.1 release have …
- 10:25 Changeset [11819] by
-
Fixes to compile with gcc 9.2
- 10:23 Changeset [11818] by
-
Fixes to compile with gcc 9.2
2019-10-28:
- 17:19 Changeset [11817] by
-
A few rogue "STOP"s become "ctl_stop"!
- 17:10 Changeset [11816] by
-
A few rogue "STOP"s become "ctl_stop"!
- 12:01 Changeset [11815] by
-
Branch for Ticket #2323
- 11:59 Ticket #2323 (read/write SI3 restart with XIOS) created by
-
Currently each processor reads and writes restart. This development will …
- 11:18 Changeset [11814] by
-
trunk: fix typo in namsbc_cpl
- 11:18 Changeset [11813] by
-
release-4.0.1: fix typo in namsbc_cpl
- 11:14 Changeset [11812] by
-
trunk: add missing USE phycst in icedyn_adv_pra, needed when not using key_iomput
- 11:13 Changeset [11811] by
-
release-4.0.1: add missing USE phycst in icedyn_adv_pra, needed when not using key_iomput
- 11:11 Changeset [11810] by
-
Ticket #2255. Add grids definitioh for grid_T_SFC gznl_T_2D gznl_T_3D gznl_W_3D
2019-10-26:
- 14:15 Changeset [11809] by
-
Inclusion of river runoff (arrays rnf and rnf_b of module sbc_oce) in the nonlinear-model trajectory used by NEMOTAM; elimination of the use of an uninitialised array (array rnf_b of module sbc_oce) in the reconstruction of the vertical velocity field of the nonlinear-model trajectory used by NEMOTAM (fix for the bugs described in ticket #1876)
2019-10-25:
- 18:11 Changeset [11808] by
-
Change token to Name.Constant for format declaration
- 18:08 Changeset [11807] by
-
Change colors for CPP directives and modules/routines names for readability
- 17:43 Changeset [11806] by
-
Enabling of the selection of the flux formulation as surface boundary condition (ln_flx set to .TRUE. in namelist namsbc) and elimination of the use of an unassigned variable (variable nsbc of module sbcmod_tam) in NEMOTAM (application of the patch attached to ticket #1738)
- 17:25 Changeset [11805] by
-
remove Mercator old cluster (Naviti) arch from SETTE
- 17:25 Changeset [11804] by
-
Use of "TURB_FLUXES@…" inside sbcblk.F90, positive latent HF & positive cool-skin temperature now allowed!
- 17:23 Changeset [11803] by
-
Import emacs style from Pygments for future modifications
- 17:15 Changeset [11802] by
-
#2222, 1) add linear interpolation in vremap module.
2) Switch remapping of viscosity from polynomial to linear.
3) Move to truly volume weighted averages for parent to child update.
- 17:13 Changeset [11801] by
-
Add some syntax patterns to highlight
- Modules and routines declarations with USE and CALL statements (Name.Function token)
- Output format with WRITE (Name.Label)
- CPP simple directives (define|else|endif|if|ifdef|undef)
- 17:06 Changeset [11800] by
- 16:27 Changeset [11799] by
-
Update the branch to v4.0.1 of the trunk
- 16:13 2020WP edited by
-
(diff)
- 15:52 2020WP edited by
-
(diff)
- 15:51 Changeset [11798] by
-
Merged in Clem's suggested changes.
- 15:38 Ticket #2322 (MInimum size of mpp subdomain uncorrectly set for AGRIF zooms) created by
-
==== Context AGRIF does not work for too small mpp subdomains (defined as …
- 15:37 2020WP edited by
-
(diff)
- 15:36 Changeset [11797] by
-
Branch for ticket #2255
- 14:54 Changeset [11796] by
-
Modifying sette ref configutation script according to new developments
- 14:48 Changeset [11795] by
-
Creating sette specific branch for PISCES_LBC in TOP
- 14:16 Page Templates/Workplan/Action edited by
-
(diff)
- 12:34 Ticket #2321 (Broken on the fly vertical interpolation of open boundary data) closed by
-
fixed
- 12:26 Changeset [11794] by
-
#2321, missing init for online vertical interpolation of bdy data
- 12:25 Changeset [11793] by
-
#2321, missing init for online vertical interpolation of bdy data
- 12:16 Changeset [11792] by
-
update namelist_ice_cfg in AGRIF_DEMO cfg as in ORCA2_ICE_PISCES cfg to pass AGRIF-ORCA2 corruption tests in SETTE
- 12:15 2020WP edited by
-
(diff)
- 12:14 Page Templates/Workplan/Action edited by
-
(diff)
- 12:10 Page Templates/Workplan/Action edited by
-
(diff)
- 12:01 Page Templates/Workplan/Action edited by
-
(diff)
- 11:59 Developers/Dev Process edited by
-
(diff)
- 11:45 Developers/Dev Process edited by
-
(diff)
- 11:41 Ticket #2321 (Broken on the fly vertical interpolation of open boundary data) created by
-
==== Context Online vertical interpolation of boundary data in fldread …
- 10:35 Changeset [11791] by
-
#2222, scalar not initialized outside of conditional statement
2019-10-24:
- 19:04 2020WP edited by
-
(diff)
- 19:04 2020WP edited by
-
(diff)
- 17:40 Changeset [11790] by
-
Ticket #2320 correction for SAS
- 17:20 Changeset [11789] by
-
Add missing divide by icea fraction to sea ice fluxes
- 15:06 Changeset [11788] by
-
Cosmetic changes
- 14:56 2020WP edited by
-
(diff)
- 14:53 Page Templates/Workplan edited by
-
(diff)
- 14:40 2020WP created by
-
- 14:24 Page Templates/Workplan edited by
-
(diff)
- 13:46 Changeset [11787] by
-
Ticket #1840, add fix related to optional argument from ticket 2270
- 13:46 Ticket #2270 (segfault in sbcdcy.F90) closed by
-
fixed: Make fix part of the ticket #1840, where optional arguments are fixed in …
- 13:05 Changeset [11786] by
-
Ticket #1840, changes in iom.F90
- 12:38 Changeset [11785] by
-
Fixes to prevent FPE-related errors at runtime (masked regions).
- 11:25 Changeset [11784] by
-
Branch for ticket #1840
- 11:00 Ticket #2062 (modification of Fcheck_archfile script) closed by
-
fixed: Already in the trunk.
- 10:37 Changeset [11783] by
-
Ticket #2320: set nn_print to 3 in namelist_ref
- 10:30 Changeset [11782] by
-
Ticket #2320 print levels in ICE/OCE
2019-10-23:
- 21:02 Changeset [11781] by
-
Improve Fortran lexer by creating distinct states for comment, boolean, operator and punctuation
Respectively cmt, bool, opr & punc.
The regexps were from the 'core' state which was reduced to statements, data types and builtins
The punctuation state has evolved to handle & character more wisely:
highlight only if followed by whitespace (continuation line), if not
Tested with tracers.rst which includes routine, namelist and code-block.
Still a small issue with on a specific namelist.
- 18:08 Changeset [11780] by
-
Define fortran as the default language for code highlighting
So we only have to define the language in a code-block directive for others.
- 18:03 Changeset [11779] by
-
Create 'namelist' state to handle highlighting of this particular statement
Probably not optimized but it works.
The line have to start with the expecting syntax for declaring a namelist &[a-z][\w$]*
The token type that seems appropriate is the namespace (Name.Namespace).
The declaration of variables, arrays and data structures are taken into account in the same regexp
with bygroups
The slash terminator to end the namelist will also be colorized to make some kind of an envelope
surrounding the variables and arrays.
- 18:00 Changeset [11778] by
-
debug 4
- 17:49 Changeset [11777] by
-
Branch 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. Begin merge prepartions by merging changes on the trunk since this branch creation. Do this in staged commits in case of issues. First stage is to merge and commit changes to cfgs directory (cd cfgs; svn merge -r 10721:11740 svn+ssh://acc@forge.ipsl.jussieu.fr/ipsl/forge/projets/nemo/svn/NEMO/trunk/cfgs ./)
- 17:39 Changeset [11776] by
-
debug 3
- 16:41 Changeset [11775] by
-
LB: solid updates+improvements of cool-skin/warm-layer capabilty of COARE and ECMWF bulk algorithms!
- 16:30 Changeset [11774] by
-
Correction of the state-variable advancement in adjoint mode (application of the patch attached to ticket #1443)
- 16:04 Changeset [11773] by
-
Change zbeta to 0.13
- 16:04 Changeset [11772] by
-
LB: solid updates+improvements of cool-skin/warm-layer capabilty of COARE and ECMWF bulk algorithms!
- 15:04 Changeset [11771] by
-
Branch 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. Updates to MY_SRC files in CANAL test case (previously untested on this branch).
- 14:02 Changeset [11770] by
-
Removal of unused node-factor formulae (ticket #2194)
- 12:08 Changeset [11769] by
-
#2222 1) change sponge definition to add time relaxation in addition to Laplacian diffusion (WRF like): Add new parameters in namelist.
2) Reduce sponge width by 1 child grid point to match coarse grid cells.
- 11:58 Changeset [11768] by
-
Addition of an alternative tidal-constituent parameter set (ticket #2194)
- 11:58 Changeset [11767] by
-
Modify lexer to recognize all logical operators
Move punctuation rule at the end of 'core' token to make operator rule working on .and., .not. & .or.
- 11:45 Changeset [11766] by
-
Add ENDIF in keywords, remove 'and', 'or' & 'not' from builtins
- 11:11 Changeset [11765] by
-
Import fortran lexer from Pygments for future changes
2019-10-22:
- 19:57 Changeset [11764] by
-
Addition of optional tidal-potential output (ticket #2194)
- 18:18 Changeset [11763] by
-
Branch 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. Update to WAD files that were previously untested on this branch
- 17:11 Ticket #2309 (print statements in iceberg model) closed by
-
fixed: fixed in revision 11536.
- 15:42 Changeset [11762] by
-
Enable outputting of sea ice volume and sea ice conductivity (as provided by the coupler).
- 12:02 Changeset [11761] by
-
Create unpub folder for unpublished READMEs (displayed with make drafthtml)
2019-10-21:
- 21:17 Changeset [11760] by
-
#2222, mistake in previous commit
- 18:24 Changeset [11759] by
-
Review README for data assimilation
- 18:19 Changeset [11758] by
-
Branch 2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps. Removal of unnecessary cyclic dependancy between oce_trc and step and update to previously untested BENCH MY_SRC files
- 17:57 Developers/Good Practices edited by
-
(diff)
- 17:20 Changeset [11757] by
-
Ticket #2320 create branch
- 17:09 Ticket #2320 (Improvements in text output) created by
-
==== Context NEMO writes a lot of text diagnostics (some of the files are …
- 16:59 Changeset [11756] by
-
UKMO/NEMO_4.0.1_GO8_package : Bug fix for previous change.
- 16:47 Changeset [11755] by
-
UKMO/NEMO_4.0.1_GO8_package :
- Make names consistent between Basic and CMIP6 standard diagnostics packages.
- Add bottom temperature and salinity to standard diagnostics packages.
- 16:25 Changeset [11754] by
-
Review README for coupling
- 16:21 Changeset [11753] by
-
Review README for AGRIF
- 16:08 Changeset [11752] by
-
Improve the view of todo items by adding the list in the TOC tree
- 15:58 Changeset [11751] by
-
Review README for tools
- 15:55 Changeset [11750] by
-
UKMO/NEMO_4.0.1_old_tidal_mixing : science change.
- 15:48 Changeset [11749] by
-
Fix to OPA_SRC/TRD/trdtrc.F90, so I can run just the physical ocean with Dr Hook
- 15:27 Changeset [11748] by
-
UKMO/NEMO_4.0.1_GO6_mixing : science change.
- 15:21 Changeset [11747] by
-
Review README for diagnostics
- 15:10 Changeset [11746] by
-
UKMO branch to reinstate old Simmons et al tidal mixing scheme at NEMO 4.0.1 to compare with new scheme.
- 15:00 Changeset [11745] by
-
Create symbolic link setup.rst to README in ./src/OCE/USR
- 14:59 Changeset [11744] by
-
UKMO branch to implement GO6 option for nn_htau.
- 14:57 Changeset [11743] by
-
Review README for configuration setup
- 14:37 Changeset [11742] by
-
UKMO/NEMO_4.0.1_GO8_package :
- Bug fixes.
- Temporarily revert masking of sea ice fields at non-icy ocean points because this doesn't work with XIOS 2.0.
- 12:26 Changeset [11741] by
-
#2222: correct definition of parent vertical grid on the child domain to perform vertical interpolation at boundaries. Use additionnal parent depths and number of levels arrays interpolated on the child grid domain to do so.
Correction of vertical interpolation of viscosity remains to be done as well as duplication of changes for passive tracers.
- 10:55 Changeset [11740] by
-
#2222, typo in comment
- 10:49 Changeset [11739] by
-
#2222, make possible vertical coordinate change with VORTEX (child vertical grid spacing chosen in namelist) + fix to compile VORTEX without key_AGRIF
- 09:34 Changeset [11738] by
-
The Dr Hook changes from my perl code.
2019-10-18:
- 20:13 Changeset [11737] by
-
Addition of terdiurnal components to the computation of the tidal potential (ticket #2194)
- 19:53 Changeset [11736] by
-
Remaining modified files
- 19:50 Changeset [11735] by
-
Review README for test cases (a gif file mentioned to illustrate CANAL is missing)
- 18:46 Changeset [11734] by
-
Review README for reference confgiurations
- 18:17 Changeset [11733] by
-
more debug
- 18:10 Changeset [11732] by
-
update trunk from #11730
- 18:06 Changeset [11731] by
-
update trunk from #11729
- 17:47 Changeset [11730] by
-
last commit: avoid division by 0 occuring on some rare occasions (CMMC and ECMWF issues). It might be machine dependant.
- 17:44 Changeset [11729] by
-
last but one commit: put back aEVP as a default rheology but force orca2 to use EVP instead
- 17:27 Changeset [11728] by
-
debug
- 17:19 Changeset [11727] by
-
Crop caption for AGRIF_DEMO illustration
- 16:49 Changeset [11726] by
-
add Changes to enable Alkalinity geo-ingeneering tests within MEDUSA
- 16:38 Changeset [11725] by
-
Add NOAA picture of PAPA ocean station
- 16:34 Changeset [11724] by
-
Add image of AMM domain bathymetry extract from Enda's reference paper
- 14:33 Changeset [11723] by
-
Review of INSTALL.rst
- 13:51 Changeset [11722] by
-
Removal of component nutide, which mirrors component nt, from variables of derived data type tide (ticket #2194)
- 13:46 Changeset [11721] by
-
Create branch for surface Alkalinity runs
- 12:58 Changeset [11720] by
-
add halo managment file- ticket #2009
- 12:52 Changeset [11719] by
-
add extra halo support- ticket #2009
- 12:03 Changeset [11718] by
-
Rename symlinks to rst files
Shortening the internal link syntax with :doc: and making it much readable
- 11:05 Changeset [11717] by
-
UKMO/NEMO_4.0.1_GO8_package: copy over changes from NEMO_4.0_GO8_package branch.
- 10:50 Changeset [11716] by
-
UKMO GO8 package branch relative to NEMO 4.0.1 release.
- 10:43 Changeset [11715] by
-
UKMO/NEMO_4.0.1_mirror : Remove SVN keywords.
- 10:26 Changeset [11714] by
-
Mirror of NEMO 4.0.1 release in UKMO branch with SVN keywords removed. To form base revision for UKMO builds.
2019-10-17:
- 17:49 Changeset [11713] by
-
Revamp TOP README and implement a TODO list
Review tracers.rst by adding snippets of source files
Add drafthtml target for Makefile related to draft building tag for sphinx-build to
display todo items at the top of the guide homepage
Misc:
- Use dedicated :file: role instead of ... for file or directory
- Update BibTeX entries of NEMO reference publications by using :title: role
- Dump of RELEASE_NOTES.rst
- New file todos.rst to list all items declared with todo directive
- Modify conf.py to add a conditional test for draft tag
- 14:10 Changeset [11712] by
-
in line with the previous commit, remove the same external definition on dev branches
- 12:06 Changeset [11711] by
-
Remove external definition to bibtool.rsc for trunk and 4.0.1
- 11:54 Changeset [11710] by
-
New branch for PISCES-QUOTA improvment see ticket #2319
- 11:48 Ticket #2319 (Create dev branch for PISCES-QUOTA improvments) created by
-
BE CAREFUL !!! Due to dynamic behaviour of this ticket creation page, it …
2019-10-16:
- 20:57 Changeset [11709] by
-
Choose a more appropriate name to identify the starting space to take the first steps as developer
Instead of collecting one by one your branches with several checkouts,
I suggest to download this developer directory to install a lightweight but working development environment in order to handle all your developments in one local working copy.
$ svn co http://forge.ipsl.jussieu.fr/nemo/svn/utils/developer
Then run the shell script install_dev_env.sh to do once for all a single checkout from
the SVN repository
$ ./install_dev_env.sh [ID] # Create './NEMO_dev' folder mimicking '/NEMO' on the repo $ # (development of the NEMO core with 'trunk', 'branches' & 'releases' $ ./install_dev_env.sh repo [ID] # Create './NEMO_repo' folder mimicking the entire repo (/) $ # (including source code defined as externals: AGRIF, tools, etc...)
In any case, the trunk and the latest release will be downloaded entirely.
Add your developer username (ID) to already have the right URL scheme for committing:
svn+ssh://... instead of default http://... (no need to launch svn sw --relocate ... later).
From that, the SVN operations will be much simpler with UNIX-like SVN cmds (svn {cp,ls,mv,rm} ...) before pushing the changes to the repository with the usual svn ci ....
To know how to manage your working copy (create, download and delete a branch), see README at the root.
- 11:13 Changeset [11708] by
-
z
- 11:05 Changeset [11707] by
-
Review of the rst content
In short, new citations.rst to have a distinct page for NEMO references and
an update of the global directives
- 10:51 Changeset [11706] by
-
Update files to be compliant with Python 3 (Python 2 no longer available)
The compilation of the guide is no longer easy with Python 2 with the need of virtual env to
downgrade some dependencies.
Last but not least, Python 2 support will expire by the end of the year.