[4437] | 1 | #- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $ |
---|
| 2 | [Compatibility] |
---|
| 3 | libIGCM=1.0 |
---|
| 4 | |
---|
| 5 | [UserChoices] |
---|
| 6 | # Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n) |
---|
| 7 | LMDZ_10m_winds=y |
---|
| 8 | #choose threshold or weibull10 parameter value |
---|
| 9 | wind_parameter=0.89 |
---|
| 10 | #choose seasalt correctif |
---|
| 11 | seasalt_corr=1.15 |
---|
| 12 | # heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie |
---|
| 13 | feedb=0 |
---|
| 14 | #coupled model with ORCH |
---|
| 15 | #if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card |
---|
| 16 | CoupOrchInca=n |
---|
| 17 | #active or not chemistry flux in output |
---|
| 18 | calcul_flux=n |
---|
| 19 | #choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft) |
---|
| 20 | flag_plane=1 |
---|
| 21 | #choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) |
---|
| 22 | #be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc ) |
---|
| 23 | emi_interp_time=1 |
---|
[4884] | 24 | #activate the flag cmip_xml if you are running a CMIP experiment |
---|
| 25 | cmip_xml=y |
---|
[4437] | 26 | |
---|
| 27 | |
---|
| 28 | [InitialStateFiles] |
---|
| 29 | List= () |
---|
| 30 | |
---|
| 31 | [BoundaryFiles] |
---|
| 32 | List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_1850_phy.nc, sflx_ANT.nc ),\ |
---|
| 33 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_1850_phy.nc, sflx_BBG.nc ),\ |
---|
| 34 | (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_1850_phy.nc , aircraft_mth.nc ),\ |
---|
| 35 | (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}/oxydants_1850.nc , oxydants.nc ) |
---|
| 36 | |
---|
| 37 | |
---|
| 38 | ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc , sflx_GHG.nc )\ |
---|
| 39 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc , sflx_MISC.nc )\ |
---|
| 40 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc , sflx_NAT.nc )\ |
---|
| 41 | (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc , landuse.nc )\ |
---|
| 42 | (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC_v2.txt , rhvEC.txt )\ |
---|
| 43 | (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC_v2.txt , wthEC.txt )\ |
---|
| 44 | (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC_v2.txt , clyEC.txt )\ |
---|
| 45 | (${R_IN}/CHM/INCA${RESOL_CHM}/wth_v2.dat , wth.dat )\ |
---|
| 46 | (${R_IN}/CHM/INCA${RESOL_CHM}/cly_v2.dat , cly.dat )\ |
---|
| 47 | (${R_IN}/CHM/INCA${RESOL_CHM}/rhv_v2.dat , rhv.dat )\ |
---|
| 48 | (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat , phototable.dat ) |
---|
| 49 | |
---|
| 50 | |
---|
| 51 | [ParametersFiles] |
---|
| 52 | List= (${SUBMIT_DIR}/PARAM/inca.def, .),\ |
---|
| 53 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .) ,\ |
---|
[4884] | 54 | (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca_CM6.xml, field_def_inca.xml) ,\ |
---|
[4437] | 55 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, .) ,\ |
---|
[4884] | 56 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER_daily_CM6.xml, file_def_inca_daily.xml ), \ |
---|
| 57 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER_monthly_CM6.xml, file_def_inca_monthly.xml ), \ |
---|
[4437] | 58 | (${MODIPSL}/bin/inca.dat, .) |
---|
| 59 | |
---|
| 60 | [RestartFiles] |
---|
| 61 | # List restart that have to be saved/restored each loop (file out, saved, and in) : |
---|
| 62 | List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat)\ |
---|
| 63 | (chem_restart.nc, chem_restart.nc, chem_start.nc) |
---|
| 64 | |
---|
| 65 | [OutputText] |
---|
| 66 | List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca_daily.xml,file_def_inca_monthly.xml) |
---|
| 67 | |
---|
| 68 | [OutputFiles] |
---|
| 69 | List= (inca1d_emi.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc , Post_1D_inca_emi ),\ |
---|
| 70 | (inca1d_species.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc , Post_1D_inca_species ),\ |
---|
| 71 | (inca1d_dep.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc , NONE ),\ |
---|
| 72 | (inca1d_aero.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc , Post_1D_inca_aero ),\ |
---|
| 73 | (inca1d_invariants.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_invariants.nc , NONE ),\ |
---|
| 74 | (inca1d_chem.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc , NONE ),\ |
---|
| 75 | (inca1d_washrate.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc , NONE ),\ |
---|
| 76 | (inca1m_emi.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc , NONE ),\ |
---|
| 77 | (inca1m_species.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc , NONE ),\ |
---|
| 78 | (inca1m_dep.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc , NONE ),\ |
---|
| 79 | (inca1m_aero.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc , NONE ),\ |
---|
| 80 | (inca1m_invariants.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_invariants.nc , NONE ),\ |
---|
| 81 | (inca1m_chem.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc , NONE ),\ |
---|
| 82 | (inca1m_washrate.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc , NONE ),\ |
---|
| 83 | (aerosols_from_inca.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc, NONE ) |
---|
| 84 | |
---|
| 85 | [Post_1D_inca_aero] |
---|
| 86 | Patches= () |
---|
| 87 | GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area) |
---|
| 88 | TimeSeriesVars2D = (loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss) |
---|
| 89 | ChunckJob2D = NONE |
---|
| 90 | TimeSeriesVars3D = () |
---|
| 91 | ChunckJob3D = NONE |
---|
| 92 | Seasonal=OFF |
---|
| 93 | |
---|
| 94 | [Post_1D_inca_emi] |
---|
| 95 | Patches= () |
---|
| 96 | GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area) |
---|
| 97 | TimeSeriesVars2D = (emino2, emino3, emihno3, emin2o5, emiso2, emih2s, emidms, emidmso, eminh3, emidustci, emino3ci, eminci, emibcai, emioaai, eminai, emisscs, emiso4cs, eminh4cs, emimsacs, emino3cs, emincs, emissas, emibcas, emioaas, emiso4as, eminh4as, emimsaas, emino3as, eminas, emissss, eminss) |
---|
| 98 | ChunckJob2D = NONE |
---|
| 99 | TimeSeriesVars3D = () |
---|
| 100 | ChunckJob3D = NONE |
---|
| 101 | Seasonal=OFF |
---|
| 102 | |
---|
| 103 | |
---|
| 104 | [Post_1D_inca_species] |
---|
| 105 | Patches= () |
---|
| 106 | GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area) |
---|
| 107 | TimeSeriesVars2D = () |
---|
| 108 | ChunckJob2D = NONE |
---|
| 109 | TimeSeriesVars3D = (mmrso4cs, mmrso4as, mmrdms, mmrssss, mmrbcai, mmrdustci, mmrbcas) |
---|
| 110 | ChunckJob3D = NONE |
---|
| 111 | Seasonal=OFF |
---|
| 112 | |
---|
| 113 | |
---|