Changeset 3967 for CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS

Timestamp:

07/10/18 14:53:09 (6 years ago)

Author:

acosce

Message:

update LMDZORINCA_v6 to follow NPv6.1.5

Location:

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS

Files:

• LMDZ/CREATE_amip/COMP/lmdz.card (modified) (3 diffs)
• LMDZOR/amip/COMP/lmdz.card (modified) (6 diffs)
• LMDZOR/amip_nudge/COMP/lmdz.card (modified) (4 diffs)
• LMDZOR/clim_360d/COMP/lmdz.card (modified) (4 diffs)
• LMDZOR/clim_pdControl/COMP/lmdz.card (modified) (4 diffs)
• LMDZORINCA/AER/COMP/lmdz.card (modified) (1 diff)
• LMDZORINCA/AER_historical/COMP/lmdz.card (modified) (2 diffs)
• LMDZORINCA/AER_pdControl/COMP/lmdz.card (modified) (2 diffs)
• LMDZORINCA/CREATE_erai/COMP/lmdz.card (modified) (1 diff)
• LMDZORINCA/DUSS/COMP/lmdz.card (modified) (1 diff)
• LMDZORINCA/GES/COMP/lmdz.card (modified) (1 diff)
• LMDZORINCA/NMHC/COMP/lmdz.card (modified) (1 diff)
• LMDZORINCA/NMHC_AER/COMP/lmdz.card (modified) (1 diff)
• LMDZORINCA/NMHC_AER_S/COMP/lmdz.card (modified) (1 diff)

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

@@ -6 +6 @@
 [UserChoices]
 # Physics package to use
-LMDZ_Physics=NPv6.0.11
+LMDZ_Physics=NPv6.1
 
 # Manage radiative aerosol effect and ozone 
@@ -13 +13 @@
 ok_aie=y
 aerosol_couple=n
-read_climoz=2
+# read_climoz : interpolation of ozone files. 
+# Use read_climoz=1 for CMIP6 ozone files, 2 for CMIP5 ozone files and 0 for no interpolation
+# LMDZ6/trunk revision 3281 or later is needed for read_climoz=1 (not included in branche IPSLCM6.0.15)
+read_climoz=0
+
 ok_cdnc=y
 
@@ -20 +24 @@
 
 [BoundaryFiles]
-List=   (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sst_360x180_${year}.nc,    amipbc_sst_1x1.nc), \
-        (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sst_360x180_${year_m1}.nc, amipbc_sst_1x1_m.nc), \
-        (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sst_360x180_${year_p1}.nc, amipbc_sst_1x1_p.nc), \
-        (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sic_360x180_${year}.nc,    amipbc_sic_1x1.nc), \
-        (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sic_360x180_${year_m1}.nc, amipbc_sic_1x1_m.nc), \
-        (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sic_360x180_${year_p1}.nc, amipbc_sic_1x1_p.nc), \
-        (${R_IN}/ATM/Ozone/HYBRIDE/v2.clim/tro3_${year}.new.nc, climoz.nc)
+List=   (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_${year}.nc,    amipbc_sst_1x1.nc), \
+        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_${year_m1}.nc, amipbc_sst_1x1_m.nc), \
+        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_${year_p1}.nc, amipbc_sst_1x1_p.nc), \
+        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sic_360x180_${year}.nc,    amipbc_sic_1x1.nc), \
+        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sic_360x180_${year_m1}.nc, amipbc_sic_1x1_m.nc), \
+        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sic_360x180_${year_p1}.nc, amipbc_sic_1x1_p.nc), \
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_m1}.nc, climoz_m.nc), \
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year}.nc, climoz.nc), \
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_p1}.nc, climoz_p.nc)
 
 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card

@@ -11 +11 @@
 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-LMDZ_Physics=NPv6.0.15_T
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+LMDZ_Physics=NPv6.1
 
 # Set ConfType to choose parameters for aerosols, solar and green house gazes.
@@ -26 +27 @@
 ok_cdnc=y
 
+# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
+tau_gl=2.
+
 # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
 ByPass_hgardfou_teta=n
@@ -37 +41 @@
 
 # Set COSP activation and output frequency (monthly, daily, HF) = y/n
-LMDZ_COSP_OK=n
+LMDZ_COSP_OK=y
 LMDZ_COSP_monthly=n
 LMDZ_COSP_daily=n
@@ -59 +63 @@
 List=   (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\
         (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc,              aerosols${year}.nc),\
-        (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
         (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
         (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
@@ -65 +69 @@
 
 # Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n)
+# Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt)
 ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
             (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
@@ -70 +75 @@
             (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
             (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\
-            (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt),\
             (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc)
 

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/amip_nudge/COMP/lmdz.card

@@ -11 +11 @@
 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-LMDZ_Physics=NPv6.0.15_T
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+LMDZ_Physics=NPv6.1
 
 # Set ConfType to choose parameters for aerosols, solar and green house gazes.
@@ -26 +27 @@
 ok_cdnc=y
 
+# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
+tau_gl=2.
+
 # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
 ByPass_hgardfou_teta=n
@@ -37 +41 @@
 
 # Set COSP activation and output frequency (monthly, daily, HF) = y/n
-LMDZ_COSP_OK=n
+LMDZ_COSP_OK=y
 LMDZ_COSP_monthly=n
 LMDZ_COSP_daily=n
@@ -59 +63 @@
 List=   (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\
         (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc,              aerosols${year}.nc),\
-        (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
         (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
         (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/clim_360d/COMP/lmdz.card

@@ -11 +11 @@
 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-LMDZ_Physics=NPv6.0.15_T
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+LMDZ_Physics=NPv6.1
+
 # Set ConfType to choose parameters for aerosols, solar and green house gazes.
 # The parameter file PARAM/config.def_$ConfType will be used.
@@ -25 +27 @@
 ok_cdnc=y
 
+# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
+tau_gl=2.
+
 # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
 ByPass_hgardfou_teta=n
@@ -36 +41 @@
 
 # Set COSP activation and output frequency (monthly, daily, HF) = y/n
-LMDZ_COSP_OK=n
+LMDZ_COSP_OK=y
 LMDZ_COSP_monthly=n
 LMDZ_COSP_daily=n
@@ -59 +64 @@
             (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
             (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\
-            (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
             (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_360days.nc, solarforcing.nc),\
             (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/lmdz.card

@@ -11 +11 @@
 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-LMDZ_Physics=NPv6.0.15_T
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+LMDZ_Physics=NPv6.1
 
 # Set ConfType to choose parameters for aerosols, solar and green house gazes.
@@ -26 +27 @@
 ok_cdnc=y
 
+# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
+tau_gl=2.
+
 # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
 ByPass_hgardfou_teta=n
@@ -37 +41 @@
 
 # Set COSP activation and output frequency (monthly, daily, HF) = y/n
-LMDZ_COSP_OK=n
+LMDZ_COSP_OK=y
 LMDZ_COSP_monthly=n
 LMDZ_COSP_daily=n
@@ -62 +66 @@
 ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
             (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\
-            (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
             (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_365d/limit_1979_2008_clim.nc, limit.nc),\
             (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_365days.nc, solarforcing.nc),\

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/AER/COMP/lmdz.card

@@ -11 +11 @@
 # LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
 LMDZ_Physics=AP
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
 
 # Use XIOS as output library

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/AER_historical/COMP/lmdz.card

@@ -6 +6 @@
 # LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-LMDZ_Physics=NPv6.0.15_T
+LMDZ_Physics=NPv6.1
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
 
 # Set ConfType to choose parameters for aerosols, solar and green house gazes.
@@ -54 +57 @@
 [BoundaryFiles]
 List=       (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\
-            (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
             (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
             (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
             (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc)
 
+# Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n)
+# Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt)
 ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
             (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
             (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
             (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
-            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\
-            (${R_IN}/ATM/IPCC_AR5/RCPs/SolarConstant/SOLAR_1765_2500.txt, SOLARANDVOLCANOES.txt)
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt)
 
 [SmoothFiles]

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/AER_pdControl/COMP/lmdz.card

@@ -6 +6 @@
 # LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-LMDZ_Physics=NPv6.0.15_T
+LMDZ_Physics=NPv6.1
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
 
 # Set ConfType to choose parameters for aerosols, solar and green house gazes.
@@ -53 +56 @@
 List=()
 ListNonDel= (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_360d/limit_1979_2008_clim.nc, limit.nc),\
-            (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
             (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_360days.nc, solarforcing.nc),\
             (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/CREATE_erai/COMP/lmdz.card

@@ -7 +7 @@
 # Physics package to use
 LMDZ_Physics=AP
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
 
 # Do not use XIOS with ce0l program

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/DUSS/COMP/lmdz.card

@@ -11 +11 @@
 # LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
 LMDZ_Physics=AP
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
 
 # Use XIOS as output library

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/GES/COMP/lmdz.card

@@ -11 +11 @@
 # LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
 LMDZ_Physics=AP
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
 
 # Use XIOS as output library

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC/COMP/lmdz.card

@@ -11 +11 @@
 # LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
 LMDZ_Physics=AP
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
 
 # Use XIOS as output library

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card

@@ -12 +12 @@
 # LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later
 LMDZ_Physics=AP
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
 
 # Use XIOS as output library

CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/lmdz.card

@@ -12 +12 @@
 # LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later
 LMDZ_Physics=AP
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
 
 # Use XIOS as output library