source: CONFIG

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @2964   8 years aclsce - Created IPSLCM5A2 configuration from IPSLCM6 rev 2911 configuration (i.e …
(edit) @2963   8 years mafoipsl For orchidee : add evapnu in TS as required by monitoring since 26/7/16. …
(edit) @2962   8 years jgipsl Change of filepath for new forcing files.
(edit) @2960   8 years acosce correct some parameter for NMHC configuration with INCA
(edit) @2959   8 years acosce Add new chemistry configuration in LMDZORINCA config
(edit) @2958   8 years jgipsl Added transpir as time-series. It is needed for the monitoring.
(edit) @2957   8 years jgipsl Removed CONTFRAC as time-serie and add it in GatherWithInternal?. …
(edit) @2956   8 years mafoipsl For IPSLCM6.0.5 and later : * disable seasonnal mean for cpl_oce and …
(edit) @2955   8 years jgipsl - Removed CO2FLUX from TS : this variable is not written anymore by …
(edit) @2954   8 years acosce Homogenization of card between LMDZORINCA_v6 and LDMZOR_v6 + add new …
(edit) @2953   8 years jgipsl Correction on monitoring of vegetation fractions
(edit) @2952   8 years jgipsl Correction on monitoring of vegetation fractions
(edit) @2951   8 years jgipsl Change comment to correct path to o2a.nc file
(edit) @2950   8 years aclsce - Bad path for piControl solar forcing file.
(edit) @2949   8 years aclsce - Modified to save XIOS debug files.
(edit) @2947   8 years jgipsl Homogenization of .cards, mainly for time-series
(edit) @2946   8 years jgipsl Activate ROUGH_DYN=y (Su parametrization) as already done in IPSLCM6
(edit) @2945   8 years jgipsl Homogenization of time-series between IPSLCM and LMDZOR (mainly added …
(edit) @2944   8 years aclsce IPSLCM6.0.5 - Put restarts informations in config.card - Activated …
(edit) @2942   8 years jgipsl Change dateEnd to correspond to noleap
(edit) @2940   8 years jgipsl Cosmetics : to be able to compare more easily with LMDZOR/clim_pdControl …
(edit) @2939   8 years jgipsl Change name
(edit) @2938   8 years jgipsl Change name from CREATE_clim to CREATE_clim_360d
(edit) @2937   8 years jgipsl Change name for experience clim into clim_360d.
(edit) @2936   8 years jgipsl Change name for experience clim into clim_360d to make it obvious which …
(edit) @2935   8 years jgipsl Change clim experience to correspond to IPSLCM6/pdControl: - add new …
(edit) @2934   8 years jgipsl Update time-series and monitoring for orchidee (only sechiba) component
(edit) @2933   8 years lfairhead New solar and stratospheric aerosols forcings have been moved to new …
(edit) @2932   8 years jgipsl - Added TS variables for orchidee (water budget) - Added frac_snow as TS - …
(edit) @2931   8 years jgipsl Update Experiment to be the same as in LMDZOR_v6
(edit) @2929   8 years jgipsl Added new physiq version for LMDZ. To be used with LMDZ/testing 2595
(edit) @2928   8 years jgipsl Update configuration LMDZOR_v6 to be used with LMDZ/testing 2595 and …
(edit) @2927   8 years aclsce - Updated LongName? in config.card of IPSLCM6.0.5 configurations.
(edit) @2926   8 years aclsce - file_def_nemo : Modified variable name which is unknown.
(edit) @2925   8 years lfairhead New set of physics parameters for LMDZ in IPSLCM6.0.5 configuration LF
(edit) @2924   8 years aclsce - Updated IPSLCM6.0.5 configuration as described there : …
(edit) @2922   8 years lfairhead XIOS file_def*xml for LMDZ are now taken from the LMDZ source directory LF
(edit) @2921   8 years lfairhead IPSLCM6 piControl and pdControl now use stratospheric aerosols forcings by …
(edit) @2920   8 years lfairhead IPSLCM6 piControl and pdControl experiments now use a new solar forcing …
(edit) @2919   8 years jgipsl Add comment
(edit) @2918   8 years cetlod IPSLCM6.0.5-LR: Add bugfixed routine (sbccpl) & updated xml for NEMO
(edit) @2916   8 years acosce change name of inca restart to fit with inca rev 566
(edit) @2915   8 years lfairhead Updating the LMDZ/XIOS files to testing version 2542 LF
(edit) @2914   8 years lfairhead Missing some default parameters from the convection.def file inclusion Of …
(edit) @2913   8 years acosce Add rrtm and XIOS to compilation for LMDZ in LMDZORINCA configuration
(edit) @2911   8 years jgipsl pmagic can now be set in lmdz.card. The default value (always 0.0) is used …
(edit) @2910   8 years jgipsl - Removed ok_strato and ok_hines from physiq.def. These flags are set in …
(edit) @2909   8 years jgipsl - For creation of interannual limit.nc files, CREATE_amip, ce0l now …
(edit) @2908   8 years acosce change the storage directory for monthly output
(edit) @2907   8 years jgipsl Set default value for stomate output frequency even if the files are …
(edit) @2906   8 years lfairhead Changing physics version used in LMDZ for IPSLCM6.0.4 reference LF
(edit) @2905   8 years cetlod Add in SOURCES/NEMO a corrected version of tvd advection scheme
(edit) @2904   8 years jgipsl Removed option to switch of XIOS for LMDZ. Note the option was not working …
(edit) @2903   8 years omamce O.M. : encore des corrections sur diaptr …
(edit) @2902   8 years omamce O.M. : correction des indices sur diaptr pour ORCA1 et ORCA2
(edit) @2901   8 years jgipsl Always have nbapp_rad=16 in couled and forced run. Frederic Hourdin
(edit) @2900   8 years jgipsl Better comments and reordering.
(edit) @2897   8 years acosce now h2o tracer are read in traceur.def even in Inca configuration (rev …
(edit) @2896   8 years jgipsl Put back pmagic=0.0 as before commit [2893]. Only IPSLCM6 pdControl …
(edit) @2895   8 years jgipsl Updated LMDZOR experiment in IPSLCM6 due to previous commit.
(edit) @2893   8 years jgipsl Updated LMDZOR_v6 as done for IPSLCM6.0.4 from revision [2876] uptil …
(edit) @2892   8 years omamce O.M : rajout TS riverflow et coastalflow
(edit) @2891   8 years omamce O.M. : passage a la geometrie eORCA1.2 : Caspienne corrigee
(edit) @2889   8 years acosce update output in TS for INCA configuration
(edit) @2888   8 years lfairhead Setting pmagic to 0.01 for all pdcontrol simulations LF
(edit) @2886   8 years aclsce IPSLCM6.0.4 : Fixed bugs
(edit) @2884   8 years cetlod Add missing output name variable in field_def_nemo-lim.xml
(edit) @2883   8 years lfairhead Definition of the physics package to use for LMDZ in the IPSLCM6.0.4 …
(edit) @2882   8 years cetlod Enable restoring of passive tracers on closed seas
(edit) @2880   8 years aclsce - Back to previous revision : problem fixed in libIGCM.
(edit) @2879   8 years aclsce Removed xml files not needed anymore for NEMO (use of shaconemo files) …
(edit) @2878   8 years cetlod Update namelist parameters file, sources files & xml files according to …
(edit) @2876   8 years aclsce Set up of IPSLCM6.0.4 (see details …
(edit) @2875   8 years cetlod Minor updates of NEMO_v6 co,figuration
(edit) @2873   8 years cetlod change nn_fsbc = 2 (to be compatible to rn_rdt)
(edit) @2872   8 years cetlod Change bio-retroaction parametrisation from Chl. observations to PISCES …
(edit) @2871   8 years cetlod Change time-step for NEMO ORCA1 configuration
(edit) @2870   8 years cetlod Update NEMO_v6 configuration to new NEMO revision
(edit) @2869   8 years acosce fixed a bug in GES configuration --> there is no aerosol in this version
(edit) @2867   8 years acosce Removed specific treatment of Bands_ file and option adjust in lmdz. See …
(edit) @2866   8 years jgipsl Added compilation of rrtm needed for NPv5.5 phyisics with LMDZ.
(edit) @2865   8 years cetlod Bugfix on passive tracers restoring in closed seas, before new NEMO …
(edit) @2864   8 years cetlod Clean & update NEMO_v6 configuration
(edit) @2863   8 years cetlod Minor bug correction of pisces.driver and remove passive tracers restoring …
(edit) @2862   8 years jgipsl Add -cpp XIOS1 in the compilation of LMDZ. This is done to force newer …
(edit) @2861   8 years omamce O.M.: add damping in closed seas for PISCES tracers
(edit) @2860   8 years omamce O.M. : coorect line to save bioscalar
(edit) @2859   8 years jgipsl Removed specific treatment of Bands_ file and option adjust in lmdz. See …
(edit) @2858   8 years cetlod Add modified diaar5.F90 routine & update trcdmp.F90 routine
(edit) @2857   8 years omamce O.M. : correct some indices in closea for ORCA1 water budget on …
(edit) @2856   8 years jgipsl Correction of name of new output file out_"execname".
(edit) @2854   8 years sdipsl - Add a present day control setup for IPSLCM6 - Update config.card …
(edit) @2853   8 years lfairhead Follow-up to convection.def file cleanup LF
(edit) @2852   8 years lfairhead Spurrious character LF
(edit) @2848   8 years cetlod Take an ocean point -ORCA2/ORCA1/eORCA1- for NEMO scalar
(edit) @2847   8 years lfairhead Parameters that were in convection.def file are now in physiq.def file No …
(edit) @2846   8 years cetlod Take an ocean point -ORCA2/ORCA1/eORCA1- for NEMO scalar
(edit) @2841   8 years jgipsl Ticket #92 Correction on option lmdz_UserChoices_CARBON_CYCLE. Note this …
(edit) @2840   8 years acosce Change name to log output for create_etat0_limit in LMDZOR and in …
(edit) @2839   8 years cetlod Use the IGCM_comp_modifyNamelist function for PISCES parameters
Note: See TracRevisionLog for help on using the revision log.