source: trunk/SRC/ToBeReviewed/PLOTS/DIVERS/placedessin.pro @ 244

;+
;
; @file_comments
; Putting into place of the drawing/ opening of the window or of the PS
;
; @categories
; Utilities
;
; @param TYPEDESSIN {type=string}
; It specify what procedure is called by <pro>PLACEDESSIN</pro> : 
; 'plt', 'pltz' or 'pltt'
;
; @keyword LANDSCAPE
; Force the page or the window on the screen to be in lengthened position.
;
; @keyword LCT {type=integer}
; It designate the number of the palette of color we want to use for the plot.
;       
; @keyword MAP
; We use it when we want to do a projection.
; This keyword can be of two types:
;     MAP=[P0lat,P0lon,Rot]. For the description of these 3 values (see the online help of MAP_SET).
;     /MAP: In this case, map is automatically calculated have the value:
;          map = [0, (lon1+lon2)/2., 0]
; Comment 1: A good way to choose the type of the projection we want to do is to have a look at IDL demo:
; IDL> demo
; Then choose earth sciences and  mapping.
; Comment 2: By default it is a cylindrical projection which is effectuated (with or without the keyword map).
; If we want an other projection, MAP must be activated and we have to add the keyword: /nom_projection.
; For example, for a polar projection centered on the south pole:
; IDL> domdef,-180,180,-90,-45
; IDL> plt, tab, /stereo,map=[-90,0,0]
;       
; @keyword NOCOLORBAR
; We active it if we do not want the colorbar.

; @keyword NOFILL
; We active it if we only want contours in black and white with a white background.
;
; @keyword NOERASE
; We active it to make a drawing without creating a new frame.
;
; @keyword SMALL
; Vector composed of 3 or 4 elements, applied to make a drawing on a
; small portion of a page or screen. It delimit the zone where the drawing will be done.
;     If there is 4 elements:
; then is constituted of coordinates (expressed in cm located from the up and
; left corner of the page or the window (in portrait like in landscape) of the bottom
; and left corner and of the up and right corner of the drawing zone.
;     If there is 3 elements:
; in this case, we divide the page or the screen in small[0] columns and in small[1] lines
; the drawing made in the box numbered small[2]. The numerotation starting up and left by
; the number 1 and then, following the writing direction.
; By default, we make the largest drawing we can do, conserving the aspect rapport
; (except when REMPLI is activated).
;
; @keyword PORTRAIT
; Force the page or the window to be in standing position.
;
; @keyword POST
; Make a postscript. Only works if we made one drawing on the page.
; If we make several drawing, use \@<pro>ps</pro>.
;
; @keyword REMPLI
; Force the drawing to occupy the whole space defined by small.
;
; @keyword WINDOW
; Number of the window on which we want to do the graph (Allow to open several windows).
; By default, we open 'IDL0'
;
; @keyword CB_TITLE
; The colorbar's title
;
; @keyword CONTOUR
; If we want to trace contours of a different field than the one
; whose we have the colored drawing (by example E-P in color and QSR in contours).
; It must be a field respecting same characteristics than the argument number 
; one of <pro>plt</pro>.
;
; @keyword ENDPOINTS
; keyword specifying that we want to make a vertical cut in diagonal. Then coordinated of extremities
; of these one are defined by the 4 elements of the vector ENDPOINTS: [x1,y1,x2,y2] which are
; coordinates.
;
; @keyword VECTEUR {type=vector}
; It is a structure composed by 2 elements containing the 2 fields U
; and V of values of the zonal and meridian component of the vector of the fields
; to draw. These fields can be an array or a structure.
;       For example: vecteur={matriceu:lec('unsurface'),matricev:lec('vnsurface')}
;       Comment: name of elements of vectors are inconsequential.
;       vecteur={u:lec('unsurface'),v:lec('vnsurface')} is also appropriated.
;
; @keyword DIREC
; 't' 'x' 'y' 'z' 'xys' 'xz' 'yz' 'xyz' 'xt' 'yt' 'zt' 'xyt'
;       'xzt' 'yzt' 'xyzt' Direction on which do averages
;
; @keyword _EXTRA
; Used to pass keywords
;
; @keyword COLOR_C
; To draw the contour in color instead of in black
; with filling in color
;
; @param POSFENETRE {out}{type=vector}
; It is a vector composed by 4 elements containing the position of the frame
; containing captions and the graph in normalized coordinates.
; Comment: To position the drawing; we have to do !p.position=posfenetre
; after the call of the caliber
;
; @param POSBAR {out}{type=vector}
; Like POSFENETRE but for the color bar.
; Same comment to position the color bar, !p.position=posbar
;
; @uses
; common.pro
;
; @history
; Sebastien Masson (smasson\@lodyc.jussieu.fr)
;                       26/4/1999
;
; @version
; $Id$
;
;-
;
PRO placedessin, typedessin, posfenetre, posbar, BARMARGES = barmarges $
                 , NOCOLORBAR = nocolorbar, NOFILL = nofill, COLOR_c = color_c $
                 , CONTOUR = contour $
                 , VECTEUR = vecteur, PORTRAIT = portrait, LANDSCAPE = landscape $
                 , SMALL = small, MARGES = marges, MAP = map $
                 , REMPLI = REMPLI, POST = post, WINDOW = window $
                 , ENDPOINTS = endpoints, TYPE = type, BASICMARGES = basicmarges $
                 , NOERASE = noerase, LCT = lct, DIREC = direc, CB_TITLE = cb_title, _EXTRA = ex
;
  compile_opt idl2, strictarrsubs
;
@cm_4ps
@cm_4mesh
  IF NOT keyword_set(key_forgetold) THEN BEGIN
@updatekwd
  ENDIF
;-------------------------------------------------------------
; 1) Determination of the size of margins (unity=number of lines or columns)
; to the left, to the right, up and down.
; BEWARE in margebar, the last element is the right up corner
; instead of the up margin
;-------------------------------------------------------------
  if n_elements(typedessin) EQ 0 then typedessin = 'autre'
  if keyword_set(basicmarges) then begin
    marge = 1.*[6, 2, 4, 3]
    if keyword_set(marges) THEN marge = marge+marges
    margebar = 1.*[marge[0]+1, marge[1]+1,  marge[2]-8,  marge[2]-6]
    if keyword_set(barmarges) then margebar = margebar+barmarges
  ENDIF ELSE BEGIN
    nocolorbar = keyword_set(nocolorbar) + keyword_set(nofill) + keyword_set(color_c)
    case typedessin of
      'plt':marge = 1.*[6, 2, 4, 3]
      'pltt':marge = 1.*[6+4*(type EQ 'xt'), 2, 4, 4]
      'pltz':marge = 1.*[6, 2, 4, 3]
      else:marge = 1.*[6, 2, 4, 3]
    ENDCASE
    if keyword_set(marges) THEN marge = marge+marges
    if NOT keyword_set(barmarges) then barmarges = replicate(0, 4)
    barmarges[3] = -barmarges[3]
    margebar = 1.*[marge[0]+1, marge[1]+1, 2, 4]+barmarges
    marge = marge+[0, 0, 4, 0]*keyword_set(cb_title)
    IF keyword_set(direc) THEN $
      marge = marge+[0, 0, 2, 0]*(strlowcase(direc) NE 't')
    marge = marge+[0, 0, 2, 0]*keyword_set(contour)
    marge = marge+[0, 0, 2, 0]*keyword_set(vecteur)
    if n_elements(lon1) NE 0 and n_elements(lon2) NE 0 $
      and n_elements(lat1) NE 0 and n_elements(lat2) NE 0 then begin
      if keyword_set(type) then $
        marge = marge+[0, 3*(type EQ 'yt' AND lon1 NE lon2), 0 $
                       , 2*(type NE 'yt' AND lat1 NE lat2)]*keyword_set(endpoints) $
      ELSE marge = marge+[0, 0, 0, 2*(lat1 NE lat2)]*keyword_set(endpoints)
    endif
    marge = marge+[0, 0, 2+margebar[3], 0]*(1-keyword_set(nocolorbar))
  ENDELSE
;--------------------------------------------------------------
; Portrait or landscape
;--------------------------------------------------------------
  IF NOT keyword_set(noerase) THEN BEGIN
    CASE 1 OF
      n_elements(portrait) NE 0:key_portrait = portrait
      n_elements(landscape) NE 0:key_portrait = 1-landscape
      ELSE:
    ENDCASE
  ENDIF
;--------------------------------------------------------------
; What type of aspect rapport (it will be crushed if YXASPECT exist)
;--------------------------------------------------------------
  case typedessin of
    'plt':yaspect = 1.*(lat2-lat1)/(lon2-lon1)
    'pltt':yaspect = 1.
    'pltz':yaspect = .5
    ELSE:yaspect = 1.
  endcase
;-------------------------------------------------------------
; 2) calculation of !p.position
; see calibre.pro.
;------------------------------------------------------------
;
  IF NOT keyword_set(small) then small = [1, 1, 1]
;
  if keyword_set(map) then rempli = 1
;
  calibre, yaspect, marge, margebar, small, posfenetre, posbar, REMPLI = rempli, _extra = ex
;
  !p.position = posfenetre
;------------------------------------------------------------
; 3) opening of the graphic window or of the postscript
;------------------------------------------------------------
  case 1 of
; case of the first drawing on a postscript
    keyword_set(post) AND !d.name ne 'PS':openps, _extra = ex
; case of the first drawing on a screen
    keyword_set(post) EQ 0 AND keyword_set(noerase) EQ 0 $
      AND !d.name ne 'PS' AND !d.name ne 'Z':BEGIN
      if not keyword_set(window) then window = 0
; For the using of \@ps,\@oups et de \@vzoom
      if lmgr(/demo) EQ 0 then BEGIN ; Are we in the demo mode??
        if !journal NE 0 then journal ; We close the journal if it is open
        homedir = isadirectory(io = homedir, title = 'Bad definition of homedir')
        def_myuniquetmpdir
        journal, myuniquetmpdir+'idlsave.pro' ; We open a new one
        help, /recall_commands, output = listecommande ; We recuperate the last command
        listecommande = strmid(strcompress(listecommande[1]), 2)
        journal, listecommande ; We write it in the journal
      ENDIF
      windsize = givewindowsize()
      window, window, xsize = windsize[0], ysize = windsize[1],  retain = 2, _extra = ex
; When we used colors which are coded on 24bit, we can not stipulate the background color
; of a window thanks to !p.background, so we have to to this:
;          if !d.n_colors gt 256 then begin
;             device, decomposed=1
;             !p.background='ffffff'x
;             plot,[0],[0], /nodata, xstyle = 4, ystyle = 4
;             device, decomposed=0
;          endif
    END
    ELSE:
  endcase
;------------------------------------------------------------
  if n_elements(lct) NE 0 then lct, lct, _extra = ex
;------------------------------------------------------------

  return
end