source: trunk/SRC/Utilities/text_box.pro @ 242

;+
;
; @file_comments
; This procedure writes a short text message within a box-shaped
; area in a graphic window. The message may be split at word
; boundaries into several lines, and the character size and
; orientation may be adjusted for the text to fit within the box.
;
; @param TEXT {in}{required} {type=string}
; message in ASCII.
;
; @keyword POS
; 4 elements vector specifying the box position and size
; pos[0],pos[1] specify the lower left corner coordinate,
; pos[2],pos[3] specify the upper right corner coordinate,
; data window normalized coordinates are used.
;
; @keyword FG_COLOR {default=0}
; color of box and legend titles
;
; @keyword BG_COLOR
; background color. Setting BG_COLOR erases the area
;               covered by the text box (filling it with color BG_COLOR)
;               prior to writing the text.  If both BG_COLOR and !p.color
;               are zero then the background color is reset to 255 to
;               guarantee a readability.
;
; @keyword RIGHT
; if set, right justify text
;
; @keyword CENTER
; if set, center the text
;
; @keyword VERT_SPACE {default=1.5}
; vertical spacing of lines in units of character height
;
; @keyword _EXTRA
; Used to pass keywords
;
; @keyword BOX
; activate to show the box on graphic window.
;
; @history
; Paul Ricchiazzi                            7Jul93
;           Institute for Computational Earth System Science
;           University of California, Santa Barbara
;
; @version
; $Id$
;
;-
;
PRO text_box,text,pos=pos,fg_color=fg_color,bg_color=bg_color,$
               center=center,right=right,box=box,vert_space=vert_space, _EXTRA = ex
;
  compile_opt idl2, strictarrsubs
;
        ON_ERROR, 2
;
;  Check the number of parameters.
;
justify=-1
if keyword_set(right) ne 0 then justify=1
if keyword_set(center) ne 0 then justify=0
if keyword_set(vert_space) eq 0 then vert_space= 1.5
IF n_elements(text) eq 0 then message, 'must specify text'
nnx=!x.window*!d.x_vsize
nny=!y.window*!d.y_vsize
nnx=[0., 1.]*!d.x_vsize
nny=[0., 1.]*!d.y_vsize


if n_elements(pos) eq 0 then begin

  box_cursor,xx1,yy1,nx,ny
  xx2=xx1+nx
  yy2=yy1+ny
  pos=[(xx1-nnx[0])/(nnx[1]-nnx[0]),(yy1-nny[0])/(nny[1]-nny[0]),$
       (xx2-nnx[0])/(nnx[1]-nnx[0]),(yy2-nny[0])/(nny[1]-nny[0])]
  posstring=string(form='(a,4(f5.2,a))',$
           ',pos=[',pos[0],',',pos[1],',',pos[2],',',pos[3],']')
  print,strcompress(posstring,/remove_all)


endif else begin

  xx1 = nnx[0]+pos[0]*(nnx[1]-nnx[0])
  xx2 = nnx[0]+pos[2]*(nnx[1]-nnx[0])
  yy1 = nny[0]+pos[1]*(nny[1]-nnx[0])
  yy2 = nny[0]+pos[3]*(nny[1]-nnx[0])

endelse
;
;  calculate the height and width of the box in characters.
;
  width  = (xx2 - xx1) / !d.x_ch_size
  height = (yy2 - yy1) / !d.y_ch_size
;
;  decompose the message into words.
;
  words = str_sep(text,' ')
; print,f='(20a)',words
  nwords=n_elements(words)
  wordlen=lenstr(words)*!d.x_vsize
  blanklen=lenstr(' ')*!d.x_vsize
  maxcharsize=(xx2-xx1)/(4*blanklen+max(wordlen))
  charsize=1
  lpnt=intarr(nwords)
  nomore=0
  ntries=0
  repeat begin
    ntries=ntries+1
    if ntries gt 20 then message,'Can not fit message into box'
    ychsiz=vert_space*!d.y_ch_size*charsize
    wlen=wordlen*charsize
    blen=blanklen*charsize
    n_lines=fix((yy2-yy1)/ychsiz)-1
    sum=0
    ilines=0
;   print,f='(8a8)','charsz','i','ilines','n_lines','lpnt','wlen','sum','xwdth'
    for i=0,nwords-1 do begin
      sum=sum+wlen[i]+blen
      if sum+3*blen gt xx2-xx1 then begin
        ilines=ilines+1
        sum=wlen[i]+blen
      endif
      lpnt[i]=ilines

;      print,f='(f8.2,4i8,3f8.2)',charsize,i,ilines,n_lines,lpnt[i],$
;                 wlen[i]+blen,sum+3*blen,xx2-xx1
    endfor
    case 1 of
      ilines+1 lt n_lines: if charsize*1.1 gt maxcharsize then $
          vert_space=(yy2-yy1)/((n_lines-1)*!d.y_ch_size*charsize) $
          else charsize=charsize*1.1
      ilines+1 eq n_lines: nomore=1
      ilines+1 gt n_lines: charsize=charsize*.9
    endcase
endrep until nomore

lines=strarr(n_lines)
maxlen=0

for i=0,n_lines-1 do begin
  ii=where(lpnt eq i,nc)
  maxlen=(total(wlen[ii])+nc*blen)>maxlen
  lines[i]=string(f='(200a)',words[ii]+' ')
; print,i,words[ii]
; print,i,lines[i]
endfor

;
  align=.5*(1+justify)

  case justify of
    -1:xx = xx1+.5*((xx2-xx1)-maxlen)
     0:xx = 0.5*(xx1 + xx2)
     1:xx = xx2-.5*((xx2-xx1)-maxlen)
  endcase

  dy=!d.y_ch_size*charsize*vert_space
  yy=yy2-0.5*dy

  xbox=[xx1,xx2,xx2,xx1,xx1]
  ybox=[yy1,yy1,yy2,yy2,yy1]
  if n_elements(bg_color) ne 0 then begin
    if !p.color eq 0 and bg_color eq 0 then bgc=255 else bgc=bg_color
    polyfill,xbox,ybox,color=bgc,/device
  endif

  if n_elements(fg_color) eq 0 then color = 0 else color=fg_color

  for i_line = 0,n_lines-1 do begin
    yy = yy-dy
;   print,xx,yy,lines[i_line],charsize
    xyouts, xx, yy, lines[i_line], /device, charsize=charsize, $
      alignment=align, color=color, font=-1, _extra = ex
  endfor
  if keyword_set(box) then plots,xbox,ybox,color=color,/device
;
return
end